RLP www.vishay.com Vishay Sfernice Insulated Precision Wirewound Resistors Axial Leads FEATURES In wirewound precision resistors, the RLP series holds a leading position in professional applications whenever an excellent stability of the ohmic value and a correspondingly low temperature coefficient are required at the same time. The RLP model resistors comply with the most stringent requirements of the CECC 40-201-006 specification. The series consists of 5 models covering the power range from 1 W to 10 W. Non-inductive versions can be supplied on request by specifying RLP-NI. For higher power dissipations, the use of RH series resistors is recommended. * * * * * * * * * * 1 W to 10 W at 25 C According to CECC 40-201-006 According to MIL-R-26/5C and MIL-R-26/6C Excellent stability < 0.3 % after 1000 h High power up to 10 W at 25 C Low ohmic values 10 m available Low temperature coefficient 50 ppm/C Electrical insulation Climatic protection Termination = Pure matte tin or Sn/Ag/Cu according to the ohmic value * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters INSULATED 25 min. A OB OE 45 chamfer max. 0.25 mm deep 25 min. 25 min. O a 0.02 4 4 RLP1 - RLP2 a = 1 mm RLP3 - 6 - 10 a = 1.2 mm L max. MOLDED A OE O B MAX. SERIES AND STYLE A MAX. RLP1 E 0.1 WEIGHT g R > 0.15 R 0.15 7 2.5 - 0.6 0.27 RLP2 10.2 4.0 - 0.6 0.48 RLP3 14 5.54 6 0.8 1.3 RLP6 23.82 8.71 9 0.8 3.4 RLP10 46.78 10.32 11 0.8 8.6 RLP1 RLP2 RLP3 RLP6 RLP10 A B C D E 25 min. OB RLP1 - RLP2 TECHNICAL SPECIFICATIONS VISHAY SFERNICE SERIES AND STYLE Reference CECC 40-201-006 Cross-Reference NF C83-210 Cross-Reference MIL-R-26/5C and MIL-R-26/6C RP8 RP7 RP4 RP5 RP6 RW81 RW80 RW79 RW74 RW78 CECC 40-201-006 Power at 25 C, P25 at 70 C, P70 1W 0.8 W 1.5 W 1.25 W 2.5 W 2W - - Extended Sfernice Power at 25 C, P25 at 70 C, P70 1W 0.8 W 2W 1.65 W 3W 2.5 W 6W 5W 10 W 8.2 W 5 % E24 0.05 to 2 k 0.025 to 6.8 k 0.01 to 15 k 0.02 to 59 k 0.06 to 150 k 2 % E48 0.05 to 2 k 0.025 to 6.8 k 0.03 to 15 k 0.02 to 59 k 0.06 to 150 k 1 % E96 0.05 to 2 k 0.025 to 6.8 k 0.03 to 15 k 0.02 to 59 k 0.06 to 150 k 0.5 % E96 0.4 to 2 k 0.4 to 6.8 k 0.0499 to 15 k 0.3 to 59 k 0.3 to 150 k Power Rating, Pr Ohmic Range in Relation to Tolerance 0.1 % E96 Qualified Ohmic Value Range CECC 40-201-006 Limiting Element Voltage, Umax. AC/DC Critical Resistance Revision: 19-Dec-2018 Please consult Vishay Sfernice 1 to 470 0.2 to 1.78 k 0.1 to 3.57 k 0.1 to 12.1 k 0.1 to 40.2 k 50 V 120 V 200 V 300 V 720 V 17 800 W 51 100 W Out of nominal ohmic range Document Number: 50009 1 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RLP www.vishay.com Vishay Sfernice STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RANGE RATED POWER P25 C W TOLERANCE % RLP1 0.05 to 2K 1 0.1, 0.2, 0.5, 1, 2, 5 RLP2 0.025 to 6.8K 2 0.1, 0.2, 0.5, 1, 2, 5 RLP3 0.01 to 15K 3 0.1, 0.2, 0.5, 1, 2, 5 RLP6 0.02 to 59K 6 0.1, 0.2, 0.5, 1, 2, 5 RLP10 0.06 to 150K 10 0.1, 0.2, 0.5, 1, 2, 5 MODEL MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Series and Style Temperature Range Encapsulant RLP1, RLP2 High temperature mold compound RLP3, RLP6, RLP10 High temperature silicone coating Resistive Element CuNi or NiCr Ceramic Substrate Alumina or steatite Termination Climatic Category (LCT/UCT/days) -55 C to +275 C 55/200/56 Pure matte tin or Sn/Ag/Cu PERFORMANCE TESTS Short Time Overload Load Life CONDITIONS REQUIREMENTS (R/R OR INDICATED PARAMETER) IEC 60115-1 6.25 PrExtended Sfernice Power or U = 2 Umax./5 s for RLP1, RLP2, RLP3 12 PrExtended Sfernice Power or U = 2 Umax./5 s for RLP6, RLP10 (0.25 % + 0.05 ) IEC 60115-1 90'/30' cycles (0.5 % + 0.05 ) Insulation R 1 G 1000 h PrExtended Sfernice Power + 25 C Dielectric w/s Voltage Rapid Change of Temperature Climatic Sequence Humidity (Steady State) Shock Vibration Load Life at Upper Category Temperature Revision: 19-Dec-2018 IEC 60115-1 URMS = 500 V/60 s No flashover or breakdown Leakage current < 10 A IEC 60115-1 IEC 60068-2-14 Test Na 5 cycles (30' at LCT/30' at UCT) -55 C / +200 C (0.25 % + 0.05 ) IEC 60115-1 -55 C / +200 C/56 days (0.5 % + 0.05 ) IEC 60115-1 IEC 60068-2-3 Test Ca 95 % HR/40 C 56 days (0.5 % + 0.05 ) Insulation R 100 M IEC 60115-1 IEC 60068-2-27 Test Ea 50 g's/half sine/ 3 times by direction (i.e. 18 shocks) (0.25 % + 0.05 ) IEC 60115-1 IEC 60068-2-6 Test Fc 10 Hz / 55 Hz (0.25 % + 0.05 ) IEC 60115-1 90' / 30' cycles (0.5 % + 0.05 ) Insulation R 1 G 1000 h PrExtended Sfernice Power +200 C Document Number: 50009 2 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RLP www.vishay.com Vishay Sfernice TEMPERATURE COEFFICIENT in the range -55 C to +200 C OHMIC RANGE REQUIREMENT <1 100 ppm/C 1 to < 10 50 ppm/C 10 25 ppm/C STABILITY AND POWER RATING Stability changes slightly according to power rating and ambient temperature. This fact is especially important for users needing a life drift lower than the initial resistance tolerance. Typical drifts, after 2000 h life test made under the 90' / 30' conditions and at an ambient temperature of 25 C, are: OHMIC RANGE Pr 0.5 Pr RLP1 RLP2 RLP3 RLP6 RLP10 R %/R % 1W 2W 3W 5W 10 W 0.3 0.5 W 1W 1.5 W 2.5 W 5W 0.15 POWER RATING TEMPERATURE RISE 75 50 37 25 0 0 50 100 150 200 100 50 AMBIENT TEMPERATURE IN C 3.0 4.5 6.0 7.5 10.0 PACKAGING (see datasheet 50032 and 50033) Non inductive (Ayrton Perry) winding available. Please consult Vishay Sfernice. Reel of 1000 units for RLP1, RLP2, RLP3 Ammopack of 500 units for RLP1, RLP2, RLP3 Bag of 100 units for RLP1, RLP2 Blister of 20 units for RLP3 Box of 50 units for RLP6, RLP10 INDUCTANCE (Example) INDUCTANCE IN H 1.5 RATED POWER IN W NON INDUCTIVE WINDING (NI) 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 RL P6 150 0 0 250 275 300 350 0 P1 RL RL P3 200 RLP 1 HOT SPOT TEMPERATURE IN C RATED POWER IN % 100 RLP 2 250 125 RLP3 100 W MARKING Vishay Sfernice trademark, series, style, CECC style (if applicable) nominal resistance (in , k), tolerance (in %), manufacturing date. RLP3 NI 100 W 0.1 1 10 FREQUENCY IN MHz Revision: 19-Dec-2018 Document Number: 50009 3 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RLP www.vishay.com Vishay Sfernice ORDERING INFORMATION RLP 01 5R500 J R15 MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING GLOBAL PART NUMBER INFORMATION R GLOBAL MODEL RLP L P 0 6 1 5 0 R 0 J B 0 0 SIZE OPTION OHMIC VALUE TOLERANCE PACKAGING SPECIAL 01 02 03 06 10 N = non inductive winding The first four digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. B = 0.1 % C = 0.2 % D = 0.5 % F=1% G=2% J=5% Standard packaging: Size 01 and 02: S14 = bag, 100 pieces size 03: B15 = bulk, 20 pieces size 06 and 10: B25 = box, 50 pieces As applicable Ex = MEX 680R0 = 680 20301 = 20.3 k 88R88 = 88.88 ... Revision: 19-Dec-2018 Document Number: 50009 4 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000