VPD-45B 45W 1~3 Output Switching Supply
V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258
CH1 CH2
DC output voltage 5V 24V
Output V. tolerance ±4% ±7%
Output rated current 3.2A 1.2A
Output current range 0.4-5A 0.2-1.8A
Ripple & noise 50mVp-p 150mVp-p
Line regulation ±1% ±2%
Load regulation ±3% ±4%
DC output power 65.5W
Maximum output power Rated output power for convection; 72W with 18 CFM min.
Efficiency 78%
DC voltage adj. CH1:+10,-5%
Input voltage range 90~264VAC 47~440Hz ; 120~370VDC
AC current 1A/115V 0.7A/230V
Inrush current cold start 20A/115V 40A/230V
Leakage current <0.5mA
Overload protection 53~75W output power
type: Hiccup mode, recovers automatically after fault condition is removed
Temperature coefficient ±0.04% / ºC (0~50ºC) ON +5V output
Set up, rise, hold up time 800ms, 20ms, 20ms
Vibration 10~500Hz, 2G 10 min./1 cycle, period of 60 min. each axes
Withstand voltage I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min.
Isolation resistance I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms min.
Working temp., humidity -10°C~+60% (refer to output derating curve), 20%-90% RH
Storage temp., humidity -20°C~+85°C, 10%-95% RH
Dimensions 5x3 x1.1 inches (127x76.2x28 mm)
Weight 0.44 lb. (0.2 Kgs)
Safety standards UL1950, TUV EN60950
EMC standards CISPR22 (EN55022), IEC1000-4-2,3,4,5 IEC1000-3-2,3
Notes: 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient
2. Tolerance includes set up tolerance, line regulation, load regulation
3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor
4. Line regulation is measured from low line to high line at rated load
5. Output provided up to maximum current, but related to maximum output power
6. Each output provide up to maximum current, but total load cannot exceed max. output power
7. Mounting holes M1 and M2 should be grounded for purposes
*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise cus-
tomers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for cus-
tomer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s pub-
lished specifications. Nothing will be covered outside of standard product warranty.
Features
·Universal AC input/Full range
·Low leakage current<0.5mA
·Protections:Short circuit/Over load/Over voltage
·Cooling by free air convection
·100% full load burn-in test
·Fixed switching frequency at 65KHz
·2 year warranty