30
VENKEL CORP
4807 SPICEWOOD SPRINGS ROAD
BUILDING No. 3
AUSTIN, TX 78759
Phone: 512 / 794-0081
Fax: 512 / 794-0087
Toll Free: 800 / 950-8365
e-mail: sales@venkel.com
www.venkel.com
Chip Resistors
Specifications
Features •Flat Chip Resistors for surface mount applications.
•Excellent mechanical strength and electrical stability due to
special electrode construction.
•Free from troubles at placement due to accurate and uniform
physical dimensions.
L
wt
CCCC
% OF RATED POWER
AMBIENT TEMP. DEG. CENTIGRADE
DERATING CURVE
120
100
80
60
40
20
030 50 70 90 110 130 150 170
Environmental Seal
Thick Film
Resistor Element
Alumina Ceramic Substrate
Thick Film Electrode
Nickel, Tinned Outer Electrode
Structure
Operating Temp. Range is -55°C to +175°C • DC Resistance Value of zero ohm is 50m ohms max.
Power Max. Zero (ohm) Resistance L (Length) W (Width) t (Thickness) C (End Band)
Series Rating Working Current Range Inches Inches Inches Inches
at 70°C Voltage Rating (mm) (mm) (mm) (mm)
CR0201-20W 0.050W 25V 0.5A 10 - 1M ohms 0.024 ± .002 0.012 ± .001 0.010 ± .002 0.006 ± .002
(0.6 ± 0.05) (0.3 ± 0.02) (0.25 ± 0.05) (0.15 ± 0.05)
CR0402-16W 0.063W 50V 1A Zero - 10M ohms 0.040 ± .002 0.020 ± .001 0.014 ± .002 0.008 ± .004
(1.0 ± 0.05) (0.5 ± 0.02) (0.35 ± .05) (0.2 ± 0.1)
CR0603-16W 0.063W 50V 1A Zero - 20M ohms 0.063 ± .004 0.031 ± .004 0.018 ± .004 0.012 ± .006
(1.6 ± 0.1) (0.8 ± 0.1) (0.45 ± 0.1) (0.30 ± 0.15)
CR0603-10W 0.10W 50V 1A Zero - 20M ohms 0.063 ± .004 0.031 ± .004 0.018 ± .004 0.012 ± .006
(1.6 ± 0.1) (0.8 ± 0.1) (0.45 ± 0.1) (0.30 ± 0.15)
CR0805-10W 0.10W 150V 2A Zero - 22M ohms 0.079 ± .006 0.050 ± .006 0.018 ± .006 0.014 ± .006
(2.0 ± 0.15) (1.25 ± 0.15) (0.45 ± 0.15) (0.35 ± 0.15)
CR0805-8W 0.125W 150V 2A Zero - 22M ohms 0.079 ± .006 0.050 ± .006 0.018 ± .006 0.014 ± .006
(2.0 ± 0.15) (1.25 ± 0.15) (0.45 ± 0.15) (0.35 ± 0.15)
CR1206-8W 0.125W 200V 2A Zero - 22M ohms 0.126 ± .006 0.063 ± .006 0.022 ± .006 0.020 ± .008
(3.2 ± 0.15) (1.6 ± 0.15) (0.56 ± 0.15) (0.50 ± 0.20)
CR1206-4W 0.25W 200V 2A Zero - 22M ohms 0.126 ± .006 0.063 ± .006 0.022 ± .006 0.020 ± .008
(3.2 ± 0.15) (1.6 ± 0.15) (0.56 ± 0.15) (0.50 ± 0.20)
CR1210-4W 0.25W 200V 4A Zero - 3.3M ohms 0.126 ± .006 0.098 ± .006 0.022 ± .006 0.020 ± .008
(3.2 ± 0.15) (2.50 ± 0.15) (0.56 ± 0.15) (0.50 ± 0.20)
CR1210-2W 0.50W 200V 4A Zero - 3.3M ohms 0.126 ± .006 0.098 ± .006 0.022 ± .006 0.024 ± .008
(3.2 ± 0.15) (2.50 ± 0.15) (0.56 ± 0.15) (0.60 ± 0.20)
CR2010-2W 0.50W 200V 5A Zero - 2.2M ohms 0.197 ± .006 0.098 ± .006 0.022 ± .006 0.024 ± .008
(5.0 ± 0.15) (2.50 ± 0.15) (0.56 ± 0.15) (0.60 ± 0.20)
CR2010-1W 1.00W 200V 5A Zero - 2.2M ohms 0.197 ± .006 0.098 ± .006 0.022 ± .006 0.024 ± .008
(5.0 ± 0.15) (2.50 ± 0.15) (0.56 ± 0.15) (0.60 ± 0.20)
CR2512-1W 1.00W 200V 5A Zero - 2.2M ohms 0.248 ± .006 0.126 ± .006 0.022 ± .006 0.024 ± .008
(6.3 ± 0.15) (3.2 ± 0.15) (0.56 ± 0.15) (0.60 ± 0.20)
CR2512-2W 2.00W 200V 5A Zero - 2.2M ohms 0.248 ± .006 0.126 ± .006 0.022 ± .006 0.024 ± .008
(6.3 ± 0.15) (3.2 ± 0.15) (0.56 ± 0.15) (0.60 ± 0.20)
VENKEL CORP
4807 SPICEWOOD SPRINGS ROAD
BUILDING No. 3
AUSTIN, TX 78759
Phone: 512 / 794-0081
Fax: 512 / 794-0087
Toll Free: 800 / 950-8365
e-mail: sales@venkel.com
www.venkel.com 31
3 DIGIT
(G&J TOL.)
Jumper 3 zero’s
E24 Series
e.g. 2R2=2.2Ω
103=10KΩ
4 DIGIT
(F TOL.) E96 Series
e.g. 10R2=10.2Ω
1002=10kΩ
103=10KΩ
103
PACKAGING
B: BULK
T: TAPE
Add only if
13" Reel required
TCR1206-8W
SERIES
G
TOLERANCE AT 25°C
F: ± 1%
G: ± 2%
J: ± 5%
For Palladium Silver Termination
add (P) above
(P): PdAg Termination
—
13
—
How To Order
Characteristics
Item Test Basis: EIA J-RC-2690A Specification Requirements Typical
Short-time Overload 2.5 x rated voltage for 5 sec. ±1% +0.5Ω, no arc evidence within ±0.4%
Load Life 70°C, rated voltage for 1.5 hrs. <1 meg. ±3% +0.1Ω, > 1 meg. ±5% —
on/0.5 hr. for 1000 hrs.
Dielectric Withstanding Voltage 500V for 1 minute No insulation breakdown above 900-950V
Resistance to Soldering Heat 270°C for 10 seconds ±1% +0.05Ω, no mechanical damage —
Temperature Cycling EIA STD. 575, Para. 3.5 ± 1.0% —
-55 ~ +125° C, 5 cycles.
Solderability 230°C, 3 seconds, flux applied 95% minimum coverage more than 97-98%
Curing Heat Resistance +150°C for 10 minutes ±1% +0.05Ωwithin ±0.3%
Dry Heat Resistance -125°C for 1,000 hours ±3% +0.1Ω, no mechanical damage within ±0.5%
Pull Terminal Strength 500G load for 30 seconds ±1% +0.05Ω, no mechanical damage within ±0.2%
PCB Terminal Strength 1/45mm bend for 10 seconds ±1% +0.05Ω, no mechanical damage within ±0.2%
Moisture Resistance, -55°C to +125°C, 5 cycles ±1% +0.05Ω, no mechanical damage within ±0.2%
Thermal Shock
Moisture Load Life 40°C, 95% R.H., 1.5 hr. on, <1 meg ±3% +0.1Ω, > 1 meg. ±5% —
0.5 hr. off, 1,000 hours
Insulation Resistance 500V, 1 minute 1,000 meg. minimum more than 10 Meg.
Voltage Coefficient Rated voltage and +0/-100ppm/v: above 1K ± within - 90ppm/V
1/10 times rated voltage
Low Temperature Exposure -55°C for 1,000 hours ±3% +0.1Ω, no mechanical damage within ±0.5%
Temp. Coefficient (PPM/°C) J Tol.: ± 200; F Tol.: ± 100 Under 10 ohm & over 1 Meg ohm,
F Tol.: ± 350 0201 and 0402 case sizes, the T.C.R. is ±250 for J and F Tol.
