UPD24TP Series
• SIP SSR
• 3 Output Channels in one Package with common control input
• Rati ngs per channel of 15 A @ 280 VAC
• PCB Mount Package or Panel Mount quick connect terminals (F option)
• SCR output for heavy industrial loads
• Zero-crossing (resistive loads) or random-fire (inductive loads) output
• Low Leakage (snubberless) output
PRODUCT SELECTION
Control Voltage 15A 15A
4.5-8 VDC UPD2415TP UPD2415TP-10
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description (Per Channel) UPD2415TP UPD2415TP-10
Operating Voltage (47-440Hz) [Vrms] 24-280 24-280
Maximum Load Current [Arms](3) 15 15
Minimum Load Current [mArms] 150 150
Transient Overvoltage [Vpk] 600 600
Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 239/250 239/250
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6
Thermal Resistance Junction to Case [°C/W] 1.02 1.02
Maximum I² t for fusing (50/60Hz, 1/2 cycle) [A² sec] 285/259 285/259
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500
Minimum Power Factor (with Maximum Load) 0.5 0.5
INPUT SPECIFICATIONS (1)
Description UPD2415TP UPD2415TP-10
Control Voltage Range 4.5-8 VDC 4.5-8 VDC
Must Turn On Voltage 4.5 VDC 4.5 VDC
Must Turn Off Voltage 1.0 VDC 1.0 VDC
Typical Input Current @ 5 VDC 14 mAdc 14 mAdc
Nominal Input Impedance 100 Ohm 100 Ohm
Maximum Turn-On Time [msec] 1/2 Cycle 0.02
Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 2500 Vrms
Minimum Insulation Resistance (@ 500 VDC) 109 Ohm
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -40 to 80°C
Ambient Storage Temperature Range -40 to 125°C
Weight (typical) 1.53 oz. (43.4g)
GENERAL NOTES
1) All p ar am et ers at 25°C an d per s ect i on unl es s oth erwis e sp ecif i ed.
2) Off-state dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Heat sinking required, see following pages for derating curves.
MECHANICAL SPECIFICATIONS
WIRING DIAGRAM
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
Rev. 041713
ANNEX - ENVIROMENTAL INFORMATION