106
6
Microwave MLC’s
AQ Series
AQ
AVX Style
AQ11, AQ12,
AQ13, AQ14
11
Case Size
(See Chart)
E
Voltage
Code
5 = 50V
1 = 100V
E = 150V
2 = 200V
9 = 300V
7 = 500V
M 100 J A
Failure Rate
Code
A = Not
Applicable
1
Termination
Style Code
ME
Packaging*
Code
HOW TO ORDER
Temperature
Coefficient Code
M = +90±20ppm/°C (AQ11/12/13/14)
A = 0±30ppm/°C (AQ11/12/13/14)
C = 15% (“J” Termination only) (AQ12/14)
1 = Pd/Ag
(AQ11/13 only)
7 = Ag/Ni/Au
(AQ11/13 only)
J = Nickel Barrier
Sn/Pb (60/40) -
(AQ12/14 only)
T = 100% Tin
(AQ12/14 only)
Capacitance
Tolerance Code
B = ±.1 pF
C = ±.25 pF
D = ±.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
N = ±30%
Capacitance
EIA Capacitance Code in pF.
First two digits = significant
figures or “R” for decimal
place.
Third digit = number of zeros
or after “R” significant figures.
3A = 13" Reel
ME = 7" Reel
RE = 13" Reel
WE = Waffle
Pack
These porcelain and ceramic dielectric multilayer capacitor
(MLC) chips are best suited for RF/ Microwave applications
typically ranging from 10 MHz to 4.2 GHz. Characteristic is a
fine grained, high density, high purity dielectric material imper-
vious to moisture with heavy internal palladium electrodes.
These characteristics lend well to applications requiring:
1) high current carrying capabilities;
2) high quality factors;
3) very low equivalent series resistance;
4) very high series resonance;
5) excellent stability under stresses of changing volt-
age, frequency, time and temperature.
Case Length (L) Width (W) Thickness (T) Band Width (bw)
AQ11 .055±.015 .055±.015 .020/.057 .010 + .010 -.005
(1.40±.381) (1.40±.381) (.508/1.45) (.254 +.254 -.127)
AQ12 .055 + .015 - .010 .055±.015 .020/.057 .010 + .010 -.005
(1.40+ .381 - .254) (1.40±.381) (.508/1.45) (.254 +.254 -.127)
AQ13 .110±.020 .110±.020 .030/.102 .015±.010
(2.79±.508) (2.79±.508) (.762/2.59) (.381±.254)
AQ14 .110 + .020 - .010 .110±.010 .030/.102 .015±.010
(2.79 +.889 -.254) (2.79±.508) (.762/2.59) (.381±.254)
MECHANICAL DIMENSIONS: inches (millimeters)
L
W
T
A
101J
bw
PACKAGING
Standard Packaging = Waffle Pack (maximum quantity is 80)
TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 (equivalent to IEC 286 part 3).
Sizes SQCA through SQCB, CDR11/12 through 13/14.
—8mm carrier
—7" reel: ≤0.040" thickness = 2000 pcs
≤0.075" thickness = 2000 pcs
—13" reel: ≤0.075" thickness = 10,000 pcs
107
6
Microwave MLC’s
AQ Series
ELECTRICAL SPECIFICATIONS
AQ11, AQ12, AQ13, AQ14
M & A C
Temperature Coefficient (TCC) (M) +90 ± 20 PPM/ºC ( -55ºC to +125ºC) ±15% (-55ºC to 125ºC)
(M) +90 ± 30 PPM/ºC ( +125ºC to +175ºC)
(A) 0 ± 30 PPM/ºC
Capacitance Range (M) 0.1 pF to 1000 pF 0.001µF to 0.1µF
(A) 0.1 pF to 5100 pF
Operating Temperature 0.1 pF to 330 pF: from -55ºC to +175ºC -55°C to +125°C
360 pF to 5100 pF: from -55ºC to +125ºC
Quality Factor (Q) M Dielectric A & B Case Greater than 10,000 at 1 MHz 2.5% @ 1kHz
A Dielectric B Case Greater than 10,000 at 1 MHz 0.1 - 200 pF
Greater than 2,000 at 1 MHz 220 - 1000 pF
Greater than 2,000 at 1 KHz 1100 - 5100 pF
A Dielectric A Case Greater than 10,000 at 1 MHz 0.1 - 100 pF
Greater than 2,000 at 1 MHz 110 - 1000 pF
Insulation Resistance (IR) 0.1 pF to 470 pF 104Megohms min. @ 25ºC at rated WVDC
106Megohms min. @ 25ºC at rated WVDC 103Megohms min. @ 125ºC at rated WVDC
105Megohms min. @ 125ºC at rated WVDC
510 pF to 5100 pF
105Megohms min. @ 25ºC at rated WVDC
104Megohms min. @ 125ºC at rated WVDC
Working Voltage (WVDC) See Capacitance Values table See Capacitance Values table
Dielectric Withstanding Voltage (DWV) 250% of rated WVDC for 5 secs 250% of rated WVDC for 5 secs
(for 500V rated 150% of rated voltage)
Aging Effects None <3% per decade hour
Piezoelectric Effects None None
Capacitance Drift ± (0.02% or 0.02 pF), whichever is greater Not Applicable
Themal Shock Mil-STD-202, Method 107, Condition A
Moisture Resistance Mil-STD-202, Method 106
Low Voltage Humidity Mil-STD-202, Method 103, condition A, with 1.5 VDC
applied while subjected to an environment of 85ºC with
85% relative humidity for 240 hours
Life Test Mil-STD-202, Method 108, for 2000 hours at 125ºC
Shock Mil-STD-202, Method 213, Condition J
Vibration Mil-STD-202, Method 204, Condition B
Immersion Mil-STD-202, Method 104, Condition B
Salt Spray Mil-STD-202, Method 101, Condition B
Solderability Mil-STD-202, Method 208
Terminal Strength Mil-STD-202, Method 211
Temperature Cycling Mil-STD-202, Method 102, Condition C
Barometric Pressure Mil-STD-202, Method 105, Condition B
Resistance to Solder Heat Mil-STD-202, Method 210, Condition C
ENVIRONMENTAL CHARACTERISTICS
AVX SQLB will meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123
108
6
Microwave MLC’s
AQ Series Available Capacitance/Size/WVDC/T.C.
Case Length Width Thickness Band Width Avail. Term.
11 .055±.015 (1.40±.381) .055±.015 (1.40±.381) .020/.057 (.508/1.45) .010 +.010 -.005 (.254 +.254 -.127) 1 & 7
12 .055±.025 (1.40±.635) .055±.015 (1.40±.381) .020/.057 (.508/1.45) .010 +.010 -.005 (.254 +.254 -.127) J
13 .110±.020 (2.79±.508) .110±.020 (2.79±.508) .030/.102 (.762/2.59) .015±.010 (.381±.254) 1 & 7
14 .110 +0.035 -0.020 (2.79 +.889 -.508) .110±.020 (2.79±.508) .030/.102 (.762/2.59) .015±.010 (.381±.254) J
TABLE I: TC: M (+90±20PPM/°C)
CASE SIZE 11, 12, 13 & 14 DIMENSIONS: inches (millimeters)
Cap. pF Cap. Tol. WVDC
0.1 B 150
0.2 B 150
0.3 B,C 150
0.4 B,C 150
0.5 B, C, D 150
0.6 B, C, D 150
0.7 B, C, D 150
0.8 B, C, D 150
0.9 B, C, D 150
1.0 B, C, D 150
1.1 B, C, D 150
1.2 B, C, D 150
1.3 B, C, D 150
1.4 B, C, D 150
1.5 B, C, D 150
1.6 B, C, D 150
1.7 B, C, D 150
1.8 B, C, D 150
1.9 B, C, D 150
2.0 B, C, D 150
2.2 B, C, D 150
2.4 B, C, D 150
2.7 B, C, D 150
3.0 B, C, D 150
3.3 B, C, D 150
3.6 B, C, D 150
3.9 B, C, D 150
4.3 B, C, D 150
4.7 B, C, D 150
5.1 B, C, D 150
5.6 B, C, D 150
6.2 B, C, D 150
6.8 B, C, J, K, M 150
7.5 B, C, J, K, M 150
8.2 B, C, J, K, M 150
9.1 B, C, J, K, M 150
10 F, G, J, K, M 150
11 F, G, J, K, M 150
12 F, G, J, K, M 150
13 F, G, J, K, M 150
15 F, G, J, K, M 150
16 F, G, J, K, M 150
18 F, G, J, K, M 150
20 F, G, J, K, M 150
22 F, G, J, K, M 150
24 F, G, J, K, M 150
27 F, G, J, K, M 150
30 F, G, J, K, M 150
33 F, G, J, K, M 150
36 F, G, J, K, M 150
39 F, G, J, K, M 150
43 F, G, J, K, M 150
47 F, G, J, K, M 150
51 F, G, J, K, M 150
56 F, G, J, K, M 150
62 F, G, J, K, M 150
68 F, G, J, K, M 150
75 F, G, J, K, M 150
82 F, G, J, K, M 150
91 F, G, J, K, M 150
100 F, G, J, K, M 150
Case: AQ11, AQ12 Case: AQ13, AQ14
Cap. pF Cap. Tol. WVDC
0.1 B 500
0.2 B 500
0.3 B,C 500
0.4 B,C 500
0.5 B, C, D 500
0.6 B, C, D 500
0.7 B, C, D 500
0.8 B, C, D 500
0.9 B, C, D 500
1.0 B, C, D 500
1.1 B, C, D 500
1.2 B, C, D 500
1.3 B, C, D 500
1.4 B, C, D 500
1.5 B, C, D 500
1.6 B, C, D 500
1.7 B, C, D 500
1.8 B, C, D 500
1.9 B, C, D 500
2.0 B, C, D 500
2.2 B, C, D 500
2.4 B, C, D 500
2.7 B, C, D 500
3.0 B, C, D 500
3.3 B, C, D 500
3.6 B, C, D 500
3.9 B, C, D 500
4.3 B, C, D 500
4.7 B, C, D 500
5.1 B, C, D 500
5.6 B, C, D 500
6.2 B, C, D 500
6.8 B, C, J, K, M 500
7.5 B, C, J, K, M 500
8.2 B, C, J, K, M 500
9.1 B, C, J, K, M 500
10 F, G, J, K, M 500
11 F, G, J, K, M 500
12 F, G, J, K, M 500
13 F, G, J, K, M 500
15 F, G, J, K, M 500
16 F, G, J, K, M 500
18 F, G, J, K, M 500
20 F, G, J, K, M 500
22 F, G, J, K, M 500
24 F, G, J, K, M 500
27 F, G, J, K, M 500
30 F, G, J, K, M 500
33 F, G, J, K, M 500
36 F, G, J, K, M 500
39 F, G, J, K, M 500
43 F, G, J, K, M 500
47 F, G, J, K, M 500
51 F, G, J, K, M 500
56 F, G, J, K, M 500
62 F, G, J, K, M 500
68 F, G, J, K, M 500
75 F, G, J, K, M 500
82 F, G, J, K, M 500
91 F, G, J, K, M 500
Cap. pF Cap. Tol. WVDC
100 F, G, J, K, M 500
110 F, G, J, K, M 300
120 F, G, J, K, M 300
130 F, G, J, K, M 300
150 F, G, J, K, M 300
160 F, G, J, K, M 300
180 F, G, J, K, M 300
200 F, G, J, K, M 300
220 F, G, J, K, M 200
240 F, G, J, K, M 200
270 F, G, J, K, M 200
300 F, G, J, K, M 200
330 F, G, J, K, M 200
360 F, G, J, K, M 200
390 F, G, J, K, M 200
430 F, G, J, K, M 200
470 F, G, J, K, M 200
510 F, G, J, K, M 150
560 F, G, J, K, M 150
620 F, G, J, K, M 150
680 F, G, J, K, M 150
750 F, G, J, K, M 150
820 F, G, J, K, M 150
910 F, G, J, K, M 150
1000 F, G, J, K, M 150
109
6
Microwave MLC’s
AQ Series Available Capacitance/Size/WVDC/T.C.
TABLE II: TC: A (0±30PPM/°C)
CASE SIZE 11, 12, 13 & 14 DIMENSIONS: inches (millimeters)
Cap. pF Cap. Tol. WVDC
0.1 B 150
0.2 B 150
0.3 B,C 150
0.4 B,C 150
0.5 B, C, D 150
0.6 B, C, D 150
0.7 B, C, D 150
0.8 B, C, D 150
0.9 B, C, D 150
1.0 B, C, D 150
1.1 B, C, D 150
1.2 B, C, D 150
1.3 B, C, D 150
1.4 B, C, D 150
1.5 B, C, D 150
1.6 B, C, D 150
1.7 B, C, D 150
1.8 B, C, D 150
1.9 B, C, D 150
2.0 B, C, D 150
2.2 B, C, D 150
2.4 B, C, D 150
2.7 B, C, D 150
3.0 B, C, D 150
3.3 B, C, D 150
3.6 B, C, D 150
3.9 B, C, D 150
4.3 B, C, D 150
4.7 B, C, D 150
5.1 B, C, D 150
5.6 B, C, D 150
6.2 B, C, D 150
6.8 B, C, J, K, M 150
7.5 B, C, J, K, M 150
8.2 B, C, J, K, M 150
9.1 B, C, J, K, M 150
10 F, G, J, K, M 150
11 F, G, J, K, M 150
12 F, G, J, K, M 150
13 F, G, J, K, M 150
15 F, G, J, K, M 150
16 F, G, J, K, M 150
18 F, G, J, K, M 150
20 F, G, J, K, M 150
22 F, G, J, K, M 150
Case: AQ11, AQ12
Cap. pF Cap. Tol. WVDC
24 F, G, J, K, M 150
27 F, G, J, K, M 150
30 F, G, J, K, M 150
33 F, G, J, K, M 150
36 F, G, J, K, M 150
39 F, G, J, K, M 150
43 F, G, J, K, M 150
47 F, G, J, K, M 150
51 F, G, J, K, M 150
56 F, G, J, K, M 150
62 F, G, J, K, M 150
68 F, G, J, K, M 150
75 F, G, J, K, M 150
82 F, G, J, K, M 150
91 F, G, J, K, M 150
100 F, G, J, K, M 150
110 F, G, J, K, M 50
120 F, G, J, K, M 50
130 F, G, J, K, M 50
150 F, G, J, K, M 50
160 F, G, J, K, M 50
180 F, G, J, K, M 50
200 F, G, J, K, M 50
220 F, G, J, K, M 50
240 F, G, J, K, M 50
270 F, G, J, K, M 50
300 F, G, J, K, M 50
330 F, G, J, K, M 50
360 F, G, J, K, M 50
390 F, G, J, K, M 50
430 F, G, J, K, M 50
470 F, G, J, K, M 50
510 F, G, J, K, M 50
560 F, G, J, K, M 50
620 F, G, J, K, M 50
680 F, G, J, K, M 50
750 F, G, J, K, M 50
820 F, G, J, K, M 50
910 F, G, J, K, M 50
1000 F, G, J, K, M 50
Case: AQ13, AQ14
Cap. pF Cap. Tol. WVDC
0.1 B 500
0.2 B 500
0.3 B,C 500
0.4 B,C 500
0.5 B, C, D 500
0.6 B, C, D 500
0.7 B, C, D 500
0.8 B, C, D 500
0.9 B, C, D 500
1.0 B, C, D 500
1.1 B, C, D 500
1.2 B, C, D 500
1.3 B, C, D 500
1.4 B, C, D 500
1.5 B, C, D 500
1.6 B, C, D 500
1.7 B, C, D 500
1.8 B, C, D 500
1.9 B, C, D 500
2.0 B, C, D 500
2.2 B, C, D 500
2.4 B, C, D 500
2.7 B, C, D 500
3.0 B, C, D 500
3.3 B, C, D 500
3.6 B, C, D 500
3.9 B, C, D 500
4.3 B, C, D 500
4.7 B, C, D 500
5.1 B, C, D 500
5.6 B, C, D 500
6.2 B, C, D 500
6.8 B, C, J, K, M 500
7.5 B, C, J, K, M 500
8.2 B, C, J, K, M 500
9.1 B, C, J, K, M 500
10 F, G, J, K, M 500
11 F, G, J, K, M 500
12 F, G, J, K, M 500
13 F, G, J, K, M 500
15 F, G, J, K, M 500
16 F, G, J, K, M 500
18 F, G, J, K, M 500
20 F, G, J, K, M 500
22 F, G, J, K, M 500
24 F, G, J, K, M 500
27 F, G, J, K, M 500
30 F, G, J, K, M 500
33 F, G, J, K, M 500
36 F, G, J, K, M 500
39 F, G, J, K, M 500
43 F, G, J, K, M 500
47 F, G, J, K, M 500
Cap. pF Cap. Tol. WVDC
51 F, G, J, K, M 500
56 F, G, J, K, M 500
62 F, G, J, K, M 500
68 F, G, J, K, M 500
75 F, G, J, K, M 500
82 F, G, J, K, M 500
91 F, G, J, K, M 500
100 F, G, J, K, M 500
110 F, G, J, K, M 300
120 F, G, J, K, M 300
130 F, G, J, K, M 300
150 F, G, J, K, M 300
160 F, G, J, K, M 300
180 F, G, J, K, M 300
200 F, G, J, K, M 300
220 F, G, J, K, M 200
240 F, G, J, K, M 200
270 F, G, J, K, M 200
300 F, G, J, K, M 200
330 F, G, J, K, M 200
360 F, G, J, K, M 200
390 F, G, J, K, M 200
430 F, G, J, K, M 200
470 F, G, J, K, M 200
510 F, G, J, K, M 150
560 F, G, J, K, M 150
620 F, G, J, K, M 150
680 F, G, J, K, M 150
750 F, G, J, K, M 150
820 F, G, J, K, M 150
910 F, G, J, K, M 150
1000 F, G, J, K, M 150
1100 F, G, J, K, M 50
1200 F, G, J, K, M 50
1300 F, G, J, K, M 50
1500 F, G, J, K, M 50
1600 F, G, J, K, M 50
1800 F, G, J, K, M 50
2000 F, G, J, K, M 50
2200 F, G, J, K, M 50
2400 F, G, J, K, M 50
2700 F, G, J, K, M 50
3000 F, G, J, K, M 50
3300 F, G, J, K, M 50
3600 F, G, J, K, M 50
3900 F, G, J, K, M 50
4300 F, G, J, K, M 50
4700 F, G, J, K, M 50
5000 F, G, J, K, M 50
5100 F, G, J, K, M 50
TABLE III: TC: C (±15%) CASE SIZE 12 & 14
Cap. pF Cap. Tol. WVDC
1000 K, M, N 50
1200
K, M, N
50
1500
K, M, N
50
1800
K, M, N
50
2000
K, M, N
50
Cap. pF Cap. Tol. WVDC
2200
K, M, N
50
2700
K, M, N
50
3300
K, M, N
50
3900
K, M, N
50
4700
K, M, N
50
Cap. pF Cap. Tol. WVDC
5100
K, M, N
50
5600
K, M, N
50
6800
K, M, N
50
8200
K, M, N
50
10000
K, M, N
50
Case: AQ12
Cap. pF Cap. Tol. WVDC
5000 K, M, N 50
6800 K, M, N 50
8200 K, M, N 50
10000 K, M, N 50
12000 K, M, N 50
Case: AQ14
Cap. pF Cap. Tol. WVDC
15000 K, M, N 50
18000 K, M, N 50
27000 K, M, N 50
33000 K, M, N 50
39000 K, M, N 50
Cap. pF Cap. Tol. WVDC
47000 K, M, N 50
68000 K, M, N 50
82000 K, M, N 50
100000 K, M, N 50
Case Length Width Thickness Band Width Avail. Term.
11 .055±.015 (1.40±.381) .055±.015 (1.40±.381) .020/.057 (.508/1.45) .010 +.010 -.005 (.254 +.254 -.127) 1 & 7
12 .055±.025 (1.40±.635) .055±.015 (1.40±.381) .020/.057 (.508/1.45) .010 +.010 -.005 (.254 +.254 -.127) J
13 .110±.020 (2.79±.508) .110±.020 (2.79±.508) .030/.102 (.762/2.59) .015±.010 (.381±.254) 1 & 7
14 .110 +0.035 -0.020 (2.79 +.889 -.508) .110±.020 (2.79±.508) .030/.102 (.762/2.59) .015±.010 (.381±.254) J
113
6
Microwave MLC’s
Performance Curves
AVX CORPORATION
100 1000
Frequency (MHz)
1 Picofarad 10 Picofarad 100 Picofarad
1000
100
10
Q
10000
TYPICAL Q vs. FREQUENCY
AQ11/12
MIL-PRF-55681E - BG
STANDARD - M
AVX CORPORATION
1 10 100
Capacitance (pF)
250 MHz 500 MHz 1000 MHz
0.1
0.01
ESR (ohms)
1
TYPICAL ESR vs. CAPACITANCE
AQ11/12
MIL-PRF-55681E - BG
STANDARD - M
AVX CORPORATION
1 10 100
Capacitance (pF)
250 MHz 500 MHz 1000 MHz
1000
100
10
Q
10000
TYPICAL Q vs. CAPACITANCE
AQ11/12
MIL-PRF-55681E - BG
STANDARD - M
AVX CORPORATION
100 1000
Frequency (MHz)
100 Picofarad10 Picofarad3.3 Picofarad
0.1
0.01
ESR (ohms)
1
TYPICAL ESR vs. FREQUENCY
AQ11/12
MIL-PRF-55681E - BG
STANDARD - M
114
6
Microwave MLC’s
Performance Curves
AVX CORPORATION
100 1000
Frequency (MHz)
10 Picofarad1 Picofarad 47 Picofarad 330 Picofarad
1000
100
10
Q
10000
TYPICAL Q vs. FREQUENCY
AQ13/14
MIL-PRF-55681E - BG
STANDARD - M
AVX CORPORATION
1 10 100
Capacitance (pF)
250 MHz 500 MHz 1000 MHz
0.1
0.01
ESR (ohms)
1
TYPICAL ESR vs. CAPACITANCE
AQ13/14
MIL-PRF-55681E - BG
STANDARD - M
AVX CORPORATION
1 10 100
Capacitance (pF)
250 MHz 500 MHz 1000 MHz
1000
100
10
Q
10000
TYPICAL Q vs. CAPACITANCE
AQ13/14
MIL-PRF-55681E - BG
STANDARD - M
AVX CORPORATION
100 1000
Frequency (MHz)
100 Picofarad15 Picofarad1 Picofarad
0.1
0.01
ESR (ohms)
1
TYPICAL ESR vs. FREQUENCY
AQ13/14
MIL-PRF-55681E - BG
STANDARD - M
115
6
Microwave MLC’s
Performance Curves
AVX CORPORATION
100 1000
Frequency (MHz)
1 Picofarad 15 Picofarad 100 Picofarad
1000
100
10
Q
10000
TYPICAL Q vs. FREQUENCY
AQ11/12
MIL-PRF-55681E - BP
STANDARD - A
AVX CORPORATION
1 10 100
Capacitance (pF)
250 MHz 500 MHz 1000 MHz
0.1
0.01
ESR (ohms)
1
TYPICAL ESR vs. CAPACITANCE
AQ11/12
MIL-PRF-55681E - BP
STANDARD - A
AVX CORPORATION
1 10 100
Capacitance (pF)
250 MHz 500 MHz 1000 MHz
1000
100
10
Q
10000
TYPICAL Q vs. CAPACITANCE
AQ11/12
MIL-PRF-55681E - BP
STANDARD - A
AVX CORPORATION
100 1000
Frequency (MHz)
100 Picofarad15 Picofarad1 Picofarad
0.1
0.01
ESR (ohms)
1
TYPICAL ESR vs. FREQUENCY
AQ11/12
MIL-PRF-55681E - BP
STANDARD - A
116
6
Microwave MLC’s
Performance Curves
AVX CORPORATION
100 1000
Frequency (MHz)
2 Picofarad 15 Picofarad 100 Picofarad
1000
100
10
Q
10000
TYPICAL Q vs. FREQUENCY
AQ13/14
MIL-PRF-55681E - BP
STANDARD - A
AVX CORPORATION
1 10 100
Capacitance (pF)
250 MHz 500 MHz 1000 MHz
0.1
0.01
ESR (ohms)
1
TYPICAL ESR vs. CAPACITANCE
AQ13/14
MIL-PRF-55681E - BP
STANDARD - A
AVX CORPORATION
1 10 100
Capacitance (pF)
250 MHz 500 MHz 1000 MHz
1000
100
10
Q
10000
TYPICAL Q vs. CAPACITANCE
AQ13/14
MIL-PRF-55681E - BP
STANDARD - A
AVX CORPORATION
100 1000
Frequency (MHz)
100 Picofarad47 Picofarad15 Picofarad
0.1
0.01
ESR (ohms)
1
TYPICAL ESR vs. FREQUENCY
AQ13/14
MIL-PRF-55681E - BP
STANDARD - A
117
6
Microwave MLC’s
Performance Curves
TYPICAL RESONANT FREQUENCY vs. CAPACITANCE
AVX AQ11-14 (CDR11-14)
Parallel Resonant
Frequency
Series Resonant
Frequency
AQ11/12
AQ11/12
AQ13/14
AQ13/14
10
1.0
0.11.0 10 100 1000
Capacitance (pF)
Frequency (GHz)
TYPICAL RESONANT FREQUENCY vs. CAPACITANCE
AVX 0603
10
1.0
0.1110 100 1000
Capacitance (pF)
Frequency (GHz)
Parallel Resonant
Frequency
Series Resonant
Frequency
118
6
Microwave MLC’s
Automatic Insertion Packaging
TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 (equivalent to IEC 286 part 3).
Sizes SQCA through SQCB, CDR11/12 through 13/14.
—8mm carrier
—7" reel: ≤0.040" thickness = 2000 pcs
≤0.075" thickness = 2000 pcs
—13" reel: ≤0.075" thickness = 10,000 pcs
REEL DIMENSIONS:millimeters (inches)
“U” Series - 402/0603/0805/1210 Size Chips
—8mm carrier
—7" reel: 0402 = 10,000 pcs
0603 & 0805 ≤0.40" thickness = 4000 pcs
0805 . 0.040" thickness & 1210 = 2000 pcs
—13" reel: ≤0.075" thickness = 10,000 pcs
Tape A B* C D* N W1W2W3
Size(1) Max. Min. Min. Min. Max.
7.9 Min.
+1.0
8mm 8.4
-0.0
14.4 (.311)
+.060
(.331
-0.0
) (.567) 10.9 Max.
330 1.5 13.0±0.20 20.2 50 (.429)
(12.992) (.059) (.512±.008) (.795) (1.969)
11.9 Min.
+2.0
12mm 12.4
-0.0
18.4 (.469)
(.488
+.076
) (.724) 15.4 Max.
-0.0
(.607)
EMBOSSED CARRIER CONFIGURATION
8 & 12 MM TAPE ONLY
CONSTANT DIMENSIONS
Tape D0EP0P2TT1G1G2
Size Max.
+0.10
8mm 8.4
-0.0
1.75 ± 0.10 4.0 ± 0.10 2.0 ± 0.05 0.600 0.10 0.75 0.75
+.004
and (.059
-0.0
) (.069 ± .004) (.157 ± .004) (.079 ± .002) (.024) (.004) (.030) (.030)
12mm Max. Min. Min.
See See
Note 3 Note 4
Metric dimensions will govern.
English measurements rounded and for reference only.
(1) For tape sizes 16mm and 24mm (used with chip size 3640) consult EIA RS-481 latest revision.
VARIABLE DIMENSIONS
Tape Size B1D1FP1RT2WA0B0K0
Max. Min. Min.
See Note 6 See Note 5 See Note 2
+0.3
8mm 4.55 1.0 3.5 ± 0.05 4.0 ± 0.10 25 2.5 Max 8.0
-0.1
See Note 1
+.012
(.179) (.039) (.138 ± .002) (.157 ± .004) (.984) (.098) (.315
-.004
8.2 1.5 5.5 ± 0.05 4.0 ± 0.10 30 6.5 Max 12.0 ± .30
12mm (.323) (.059) (.217 ± .002) (.157 ± .004) (1.181) (.256) (.472 ± .012) See Note 1
NOTES:
1. A0, B0, and K0are determined by the max. dimensions to the ends of the
terminals extending from the component body and/or the body dimensions of
the component. The clearance between the end of the terminals or body of the
component to the sides and depth of the cavity (A0, B0, and K0) must be within
0.05 mm (.002) min. and 0.50 mm (.020) max. The clearance allowed must also
prevent rotation of the component within the cavity of not more than 20 degrees
(see sketches C & D).
2. Tape with components shall pass around radius “R” without damage. The
minimum trailer length (Note 2 Fig. 3) may require additional length to provide R
min. for 12mm embossed tape for reels with hub diameters approaching N min.
(Table 4).
3. G1dimension is the flat area from the edge of the sprocket hole to either the
outward deformation of the carrier tape between the embossed cavities or to
the edge of the cavity whichever is less.
4. G2dimension is the flat area from the edge of the carrier tape opposite the
sprocket holes to either the outward deformation of the carrier tape between the
embossed cavity or to the edge of the cavity whichever is less.
5. The embossment hole location shall be measured from the sprocket hole
controlling the location of the embossment. Dimensions of embossment
location and hole location shall be applied independent of each other.
6. B1dimension is a reference dimension for tape feeder clearance only.
)
