SN54HC08, SN74HC08 QUADRUPLE 2-INPUT POSITIVE-AND GATES www.ti.com SCLS081F - DECEMBER 1982 - REVISED JANUARY 2007 FEATURES * * * Typical tpd = 8 ns 4-mA Output Drive at 5 V Low Input Current of 1 A Max 3 12 4 11 5 10 6 9 7 8 VCC 4B 4A 4Y 3B 3A 3Y 1Y NC 2A NC 2B 2 20 19 18 5 17 1 4B 3 4 6 16 7 15 14 8 4A NC 4Y NC 3B 9 10 11 12 13 3A 13 VCC 14 2 3Y 1 2Y 1A 1B 1Y 2A 2B 2Y GND 1B SN54HC04...FK PACKAGE (TOP VIEW) SN54HC04...J OR W PACKAGE SN74HC04...D, DB, N, NS, OR PW PACKAGE (TOP VIEW) 1A NC Wide Operating Voltage Range of 2 V to 6 V Outputs Can Drive Up To 10 LSTTL Loads Low Power Consumption, 20-A Max ICC GND NC * * * NC - No internal connection DESCRIPTION/ORDERING INFORMATION The 'HC08 devices contain four independent 2-input AND gates. They perform the Boolean function Y = A * B or Y = A +B in positive logic. ORDERING INFORMATION PACKAGE (1) TA PDIP - N SOIC - D -40C to 85C (1) SN74HC08N Reel of 1000 SN74HC08DE4 Reel of 2500 SN74HC08DR Tube of 250 SN74HC08DT SOP - NS Reel of 2000 SSOP - DB Reel of 2000 TOP-SIDE MARKING SN74HC08N HC08 SN74HC08NSR SN74HC08NSRG4 SN74HC08DBR SN74HC08DBRE4 HC08 HC08 Tube of 90 SN74HC08PW Reel of 2000 SN74HC08PWR Tube of 250 SN74HC08PWT CDIP - J Reel of 1000 SNJ54HC08J SNJ54HC08J CFP - W Reel of 900 SNJ54HC08W SNJ54HC08W LCCC -FK Reel of 2200 SNJ54HC08FK SNJ54HC08JFK TSSOP - PW -55C to 125C ODERABLE PART NUMBER Reel of 1000 HC08 Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1982-2007, Texas Instruments Incorporated SN54HC08, SN74HC08 QUADRUPLE 2-INPUT POSITIVE-AND GATES www.ti.com SCLS081F - DECEMBER 1982 - REVISED JANUARY 2007 FUNCTION TABLE (EACH INVERTER) INPUTS OUTPUT Y A B H H H L X L X L L LOGIC DIAGRAM (POSITIVE LOGIC) A Y B Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN -0.5 Supply voltage range IIK Input clamp current (2) VI < 0 or VI > VCC 20 mA IOK Output clamp current (2) VO < 0 20 mA IO Continuous output current VO = 0 to VCC 25 mA 50 mA JA Tstg (1) (2) (3) Package thermal impedance (3) 7 UNIT VCC Continuous current through VCCor GND 2 MAX D package 86 DB package 96 N package 80 NS package 76 PW package 113 Storage temperature range -60 150 V C/W C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback SN54HC08, SN74HC08 QUADRUPLE 2-INPUT POSITIVE-AND GATES www.ti.com SCLS081F - DECEMBER 1982 - REVISED JANUARY 2007 Recommended Operating Conditions (1) SN54HC08 VCC Supply voltage VCC = 2 V VIH High-level input voltage VCC = 4.5 V VCC = 6 V MIN NOM MAX 2 5 6 Low-level input voltage MIN NOM MAX 2 5 6 1.5 1.5 3.15 3.15 4.2 4.2 VCC = 2 V VIL SN74HC08 VCC = 4.5 V VCC = 6 V UNIT V V 0.5 0.5 1.35 1.35 1.8 1.8 V VI Input voltage 0 VCC 0 VCC V VO Output voltage 0 VCC 0 VCC V VCC = 2 V t/v Input transition rise or fall rate TA (1) Operating free-air temperature 1000 1000 VCC = 4.5 V 500 500 VCC = 6 V 400 400 -55 125 -40 85 ns C All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback 3 SN54HC08, SN74HC08 QUADRUPLE 2-INPUT POSITIVE-AND GATES www.ti.com SCLS081F - DECEMBER 1982 - REVISED JANUARY 2007 Electrical Characteristics over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS IOH = -20 A VOH VI = VIH or VIL IOH = -4 mA IOH = -5.2 mA VOL ICC VI = VCC or 0, SN54HC08 MAX MIN SN74HC08 TYP 2V 1.9 1.998 1.9 1.9 4.5 V 4.4 4.499 4.4 4.4 6V 5.9 5.999 5.9 5.9 4.5 V 3.98 4.3 3.7 3.84 6V 5.48 5.8 MAX 5.2 MIN MAX UNIT V 5.34 0.002 0.1 0.1 0.1 IOL = 20 A 4.5 V 0.001 0.1 0.1 0.1 6V 0.001 0.1 0.1 0.1 IOL = 4 mA 4.5 V 0.17 0.26 0.4 0.33 6V 0.15 0.26 0.4 0.33 6V 0.1 100 1000 1000 nA 2 40 20 A 3 10 10 10 pF IOL = 5.2 mA VI = VCC or 0 TA = 25C MIN 2V VI = VIH or VIL II VCC IO = 0 6V Ci 2 V to 6 V V Switching Characteristics over operating free-air temperature range, CL = 50 pF (unless otherwise noted) (see Figure 1) PARAMETER FROM (INPUT) TO (OUTPUT) VCC tpd A Y tt Y TA = 25C MIN SN54HC08 MIN SN74HC08 TYP MAX MAX MIN MAX 2V 50 100 150 125 4.5 V 10 20 30 25 6V 8 17 25 24 2V 38 75 110 95 4.5 V 8 15 22 19 6V 6 13 19 16 UNIT ns ns Operating Characteristics TA = 25C PARAMETER Cpd 4 Power dissipation capacitance per inverter TEST CONDITIONS No load Submit Documentation Feedback TYP 20 UNIT pF SN54HC08, SN74HC08 QUADRUPLE 2-INPUT POSITIVE-AND GATES www.ti.com SCLS081F - DECEMBER 1982 - REVISED JANUARY 2007 PARAMETER MEASURMENT INFORMATION From Output Under Test Test Point Input VCC 50% 0V CL = 50 pF (see Note A) 50% 10% 90% In-Phase Output 90% tr tPHL tPLH LOAD CIRCUIT Input 50% 50% 10% 0V tPHL 90% VOH 50% 10% Out-of-Phase Output VOL tf tPLH 50% 10% tf VOLTAGE WAVEFORMS INPUT RISE AND FALL TIMES 90% tr VCC 50% 10% 90% 50% 10% 90% tf VOH VOL tr VOLTAGE WAVEFORMS PROPAGATION DELAY AND OUTPUT TRANSITION TIMES NOTES: A. CL includes probe and test-fixture capacitance. B. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO = 50 , tr = 6 ns, tf = 6 ns. C. The outputs are measured one at a time with one input transition per measurement. D. tPLH and tPHL are the same as tpd. Figure 1. Load Circuit and Voltage Waveforms Submit Documentation Feedback 5 PACKAGE OPTION ADDENDUM www.ti.com 29-Aug-2012 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp Samples (Requires Login) 5962-8404701VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type 5962-8404701VDA ACTIVE CFP W 14 25 TBD A42 N / A for Pkg Type 84047012A ACTIVE LCCC FK 20 1 TBD Call TI Call TI 8404701CA ACTIVE CDIP J 14 1 TBD Call TI Call TI 8404701DA ACTIVE CFP W 14 1 TBD Call TI Call TI JM38510/65203B2A ACTIVE LCCC FK 20 1 TBD JM38510/65203BCA ACTIVE CDIP J 14 1 TBD JM38510/65203BDA ACTIVE CFP W 14 1 TBD M38510/65203B2A ACTIVE LCCC FK 20 1 TBD M38510/65203BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type M38510/65203BDA ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type SN54HC08J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type SN74HC08D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08DBR ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08DBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08DBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08DRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08DT ACTIVE SOIC D 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 (3) POST-PLATE N / A for Pkg Type A42 N / A for Pkg Type A42 N / A for Pkg Type POST-PLATE N / A for Pkg Type PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 29-Aug-2012 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE SOIC D 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08DTG4 ACTIVE SOIC D 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74HC08N3 OBSOLETE PDIP N 14 SN74HC08NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) SN74HC08NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08NSRE4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08NSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08PW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08PWLE OBSOLETE TSSOP PW 14 SN74HC08PWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08PWT ACTIVE TSSOP PW 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08PWTE4 ACTIVE TSSOP PW 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74HC08PWTG4 ACTIVE TSSOP PW 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SNJ54HC08FK ACTIVE LCCC FK 20 1 TBD SNJ54HC08J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type SNJ54HC08W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type TBD Addendum-Page 2 Call TI Call TI CU NIPDAU N / A for Pkg Type Call TI Samples (Requires Login) SN74HC08DTE4 TBD (3) Call TI POST-PLATE N / A for Pkg Type PACKAGE OPTION ADDENDUM www.ti.com 29-Aug-2012 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN54HC08, SN54HC08-SP, SN74HC08 : * Catalog: SN74HC08, SN54HC08 * Automotive: SN74HC08-Q1, SN74HC08-Q1 * Military: SN54HC08 * Space: SN54HC08-SP NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product Addendum-Page 3 PACKAGE OPTION ADDENDUM www.ti.com 29-Aug-2012 * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects * Military - QML certified for Military and Defense Applications * Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application Addendum-Page 4 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74HC08DBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 SN74HC08DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74HC08DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74HC08DT SOIC D 14 250 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 SN74HC08NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 SN74HC08PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 SN74HC08PWT TSSOP PW 14 250 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74HC08DBR SSOP DB 14 2000 367.0 367.0 38.0 SN74HC08DR SOIC D 14 2500 367.0 367.0 38.0 SN74HC08DR SOIC D 14 2500 333.2 345.9 28.6 SN74HC08DT SOIC D 14 250 367.0 367.0 38.0 SN74HC08NSR SO NS 14 2000 367.0 367.0 38.0 SN74HC08PWR TSSOP PW 14 2000 367.0 367.0 35.0 SN74HC08PWT TSSOP PW 14 250 367.0 367.0 35.0 Pack Materials-Page 2 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated