www.ti.com
FEATURES
SN54HC04...JORWPACKAGE
SN74HC04...D,DB,N,NS,ORPWPACKAGE
(TOP VIEW)
1A
VCC
114
1B 4B
213
1Y 4A
312
2A 4Y
411
2B 3B
510
2Y 3A
6 9
GND 3Y
78
SN54HC04...FKPACKAGE
(TOP VIEW)
NC Nointernalconnection
4
5
6
7
18
17
16
15
4A
NC
4Y
NC
3B
14
1Y
NC
2A
NC
2B 8
120
219
NC
VCC
1A
4B
1B
3
13
912
3A
2Y
3Y
GND
NC
10 11
DESCRIPTION/ORDERING INFORMATION
Y = A B or Y = A +B
in positive logic.
SN54HC08, SN74HC08QUADRUPLE 2-INPUT POSITIVE-AND GATES
SCLS081F DECEMBER 1982 REVISED JANUARY 2007
Wide Operating Voltage Range of 2 V to 6 V Typical t
pd
= 8 nsOutputs Can Drive Up To 10 LSTTL Loads ± 4-mA Output Drive at 5 VLow Power Consumption, 20- µA Max I
CC
Low Input Current of 1 µA Max
The ’HC08 devices contain four independent 2-input AND gates. They perform the Boolean function
ORDERING INFORMATION
T
A
PACKAGE
(1)
ODERABLE PART NUMBER TOP-SIDE MARKING
PDIP N Reel of 1000 SN74HC08N SN74HC08NReel of 1000 SN74HC08DE4SOIC D Reel of 2500 SN74HC08DR HC08Tube of 250 SN74HC08DT
SN74HC08NSRSOP NS Reel of 2000 HC08–40 °C to 85 °C SN74HC08NSRG4
SN74HC08DBRSSOP DB Reel of 2000 HC08SN74HC08DBRE4Tube of 90 SN74HC08PWTSSOP PW Reel of 2000 SN74HC08PWR HC08Tube of 250 SN74HC08PWTCDIP J Reel of 1000 SNJ54HC08J SNJ54HC08J–55 °C to 125 °C CFP W Reel of 900 SNJ54HC08W SNJ54HC08WLCCC –FK Reel of 2200 SNJ54HC08FK SNJ54HC08JFK
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available atwww.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 1982–2007, Texas Instruments IncorporatedProducts conform to specifications per the terms of the TexasInstruments standard warranty. Production processing does notnecessarily include testing of all parameters.
www.ti.com
A
B
Y
Absolute Maximum Ratings
(1)
SN54HC08, SN74HC08QUADRUPLE 2-INPUT POSITIVE-AND GATES
SCLS081F DECEMBER 1982 REVISED JANUARY 2007
FUNCTION TABLE(EACH INVERTER)
INPUTS OUTPUT
YA B
H H HL X LX L L
LOGIC DIAGRAM (POSITIVE LOGIC)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V
CC
Supply voltage range –0.5 7 VI
IK
Input clamp current
(2)
V
I
< 0 or V
I
> V
CC
±20 mAI
OK
Output clamp current
(2)
V
O
< 0 ±20 mAI
O
Continuous output current V
O
= 0 to V
CC
±25 mAContinuous current through V
CC
or GND ±50 mAD package 86DB package 96θ
JA
Package thermal impedance
(3)
N package 80 °C/WNS package 76PW package 113T
stg
Storage temperature range –60 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratingsonly, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operatingconditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.(2) The input and output voltage ratings may be exceeded if the input and output current ratings are observed.(3) The package thermal impedance is calculated in accordance with JESD 51-7.
2
Submit Documentation Feedback
www.ti.com
Recommended Operating Conditions
(1)
SN54HC08, SN74HC08QUADRUPLE 2-INPUT POSITIVE-AND GATES
SCLS081F DECEMBER 1982 REVISED JANUARY 2007
SN54HC08 SN74HC08
UNITMIN NOM MAX MIN NOM MAX
V
CC
Supply voltage 2 5 6 2 5 6 VV
CC
= 2 V 1.5 1.5V
IH
High-level input voltage V
CC
= 4.5 V 3.15 3.15 VV
CC
= 6 V 4.2 4.2V
CC
= 2 V 0.5 0.5V
IL
Low-level input voltage V
CC
= 4.5 V 1.35 1.35 VV
CC
= 6 V 1.8 1.8V
I
Input voltage 0 V
CC
0 V
CC
VV
O
Output voltage 0 V
CC
0 V
CC
VV
CC
= 2 V 1000 1000t/ v Input transition rise or fall rate V
CC
= 4.5 V 500 500 nsV
CC
= 6 V 400 400T
A
Operating free-air temperature –55 125 –40 85 °C
(1) All unused inputs of the device must be held at V
CC
or GND to ensure proper device operation. Refer to the TI application report,Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
3Submit Documentation Feedback
www.ti.com
Electrical Characteristics
Switching Characteristics
Operating Characteristics
SN54HC08, SN74HC08QUADRUPLE 2-INPUT POSITIVE-AND GATES
SCLS081F DECEMBER 1982 REVISED JANUARY 2007
over operating free-air temperature range (unless otherwise noted)
T
A
= 25 °C SN54HC08 SN74HC08PARAMETER TEST CONDITIONS V
CC
UNITMIN TYP MAX MIN MAX MIN MAX
2 V 1.9 1.998 1.9 1.9I
OH
= –20 µA 4.5 V 4.4 4.499 4.4 4.4V
OH
V
I
= V
IH
or V
IL
6 V 5.9 5.999 5.9 5.9 VI
OH
= –4 mA 4.5 V 3.98 4.3 3.7 3.84I
OH
= –5.2 mA 6 V 5.48 5.8 5.2 5.342 V 0.002 0.1 0.1 0.1I
OL
= 20 µA 4.5 V 0.001 0.1 0.1 0.1V
OL
V
I
= V
IH
or V
IL
6 V 0.001 0.1 0.1 0.1 VI
OL
= 4 mA 4.5 V 0.17 0.26 0.4 0.33I
OL
= 5.2 mA 6 V 0.15 0.26 0.4 0.33I
I
V
I
= V
CC
or 0 6 V ±0.1 ±100 ±1000 ±1000 nAI
CC
V
I
= V
CC
or 0, I
O
= 0 6 V 2 40 20 µAC
i
2 V to 6 V 3 10 10 10 pF
over operating free-air temperature range, C
L
= 50 pF (unless otherwise noted) (see Figure 1 )
T
A
= 25 °C SN54HC08 SN74HC08FROM TOPARAMETER V
CC
UNIT(INPUT) (OUTPUT)
MIN TYP MAX MIN MAX MIN MAX
2 V 50 100 150 125t
pd
A Y 4.5 V 10 20 30 25 ns6 V 8 17 25 242 V 38 75 110 95t
t
Y 4.5 V 8 15 22 19 ns6 V 6 13 19 16
T
A
= 25 °C
PARAMETER TEST CONDITIONS TYP UNIT
C
pd
Power dissipation capacitance per inverter No load 20 pF
4
Submit Documentation Feedback
www.ti.com
PARAMETER MEASURMENT INFORMATION
NOTES: A. C includesprobeandtest-fixturecapacitance.
B. Phaserelationshipsbetweenwaveformswerechosenarbitrarily. Allinputpulsesaresuppliedbygeneratorshavingthefollowing
characteristics:PRR 1MHz,Z =50 ,t =6ns,t =6ns.
C. Theoutputsaremeasuredoneatatimewithoneinputtransitionpermeasurement.
D.t andt arethesameast .
L
O r f
PLH PHL pd
Ω
FromOutput
UnderTest
C =50pF
(seeNote A)
L
LOADCIRCUIT
Test
Point
VOLTAGEWAVEFORMS
INPUTRISE ANDFALL TIMES
Input 90%
90%
50% 50%
10% 10%
tf
tr
0V
VCC
VOLTAGEWAVEFORMS
PROPAGATIONDELAY ANDOUTPUTTRANSITIONTIMES
tPLH
tPLH
tPHL
tPHL
Input
In-Phase
Output
Out-of-Phase
Output
90%
90%
90%
50%
10% 10%
10%
50%
50%
50%
50%
tf
tf
tr
90%
10%
50%
tr
VCC
VOL
VOH
VOH
0V
VOL
SN54HC08, SN74HC08QUADRUPLE 2-INPUT POSITIVE-AND GATES
SCLS081F DECEMBER 1982 REVISED JANUARY 2007
Figure 1. Load Circuit and Voltage Waveforms
5Submit Documentation Feedback
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
5962-8404701VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
5962-8404701VDA ACTIVE CFP W 14 25 TBD A42 N / A for Pkg Type
84047012A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
8404701CA ACTIVE CDIP J 14 1 TBD Call TI Call TI
8404701DA ACTIVE CFP W 14 1 TBD Call TI Call TI
JM38510/65203B2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
JM38510/65203BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
JM38510/65203BDA ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
M38510/65203B2A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
M38510/65203BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
M38510/65203BDA ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
SN54HC08J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
SN74HC08D ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08DBR ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08DBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08DBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08DE4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08DG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08DR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08DRE4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08DRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08DT ACTIVE SOIC D 14 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
SN74HC08DTE4 ACTIVE SOIC D 14 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08DTG4 ACTIVE SOIC D 14 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
SN74HC08N3 OBSOLETE PDIP N 14 TBD Call TI Call TI
SN74HC08NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
SN74HC08NSR ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08NSRE4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08NSRG4 ACTIVE SO NS 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08PW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
SN74HC08PWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08PWT ACTIVE TSSOP PW 14 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08PWTE4 ACTIVE TSSOP PW 14 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SN74HC08PWTG4 ACTIVE TSSOP PW 14 250 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
SNJ54HC08FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
SNJ54HC08J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
SNJ54HC08W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 3
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN54HC08, SN54HC08-SP, SN74HC08 :
Catalog: SN74HC08, SN54HC08
Automotive: SN74HC08-Q1, SN74HC08-Q1
Military: SN54HC08
Space: SN54HC08-SP
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
PACKAGE OPTION ADDENDUM
www.ti.com 29-Aug-2012
Addendum-Page 4
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
Military - QML certified for Military and Defense Applications
Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
SN74HC08DBR SSOP DB 14 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1
SN74HC08DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
SN74HC08DR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
SN74HC08DT SOIC D 14 250 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
SN74HC08NSR SO NS 14 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1
SN74HC08PWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
SN74HC08PWT TSSOP PW 14 250 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
SN74HC08DBR SSOP DB 14 2000 367.0 367.0 38.0
SN74HC08DR SOIC D 14 2500 367.0 367.0 38.0
SN74HC08DR SOIC D 14 2500 333.2 345.9 28.6
SN74HC08DT SOIC D 14 250 367.0 367.0 38.0
SN74HC08NSR SO NS 14 2000 367.0 367.0 38.0
SN74HC08PWR TSSOP PW 14 2000 367.0 367.0 35.0
SN74HC08PWT TSSOP PW 14 250 367.0 367.0 35.0
PACKAGE MATERIALS INFORMATION
www.ti.com 14-Jul-2012
Pack Materials-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE
4040065 /E 12/01
28 PINS SHOWN
Gage Plane
8,20
7,40
0,55
0,95
0,25
38
12,90
12,30
28
10,50
24
8,50
Seating Plane
9,907,90
30
10,50
9,90
0,38
5,60
5,00
15
0,22
14
A
28
1
2016
6,50
6,50
14
0,05 MIN
5,905,90
DIM
A MAX
A MIN
PINS **
2,00 MAX
6,90
7,50
0,65 M
0,15
0°ā8°
0,10
0,09
0,25
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All
semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time
of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated