LXML-PM01-0100 - Lumileds - Datasheet.Directory

ILLUMINATION

No. E352519

The LUXEON Rebel Color Line has leading light output, color stability,

ux density and clear saturated colors. These color LEDs are ideal for a

wide variety of lighting, signaling, signage and entertainment applications.

Every LUXEON Rebel Color emitter has built-in quality, reliability, lumen

maintenance and the ease of manufacturing needed to create a superior,

high quality light. LUXEON Rebel Color emitters give designers an endless

palette of colors to work with, adding interest, dimension and liveliness to

all lighting projects.

LUXEON Rebel

Color Line

High ux and ecacy on industry’s most

widely used color LED platform

FEATURES AND BENEFITS PRIMARY APPLICATIONS

Full color palette for a wider spectrum range Architectural

Highest ecacy available for colors, allowing for lower power consumption Lamps

High ux and leading hot and cold performance for saturated colors Specialty Lighting

Fully developed ecosystem for LUXEON Rebel platforms – Emergency Lighting

– Entertainment

Table of Contents

General Product Information ......................................................................2

Product Test Conditions ..............................................................................2

Part Number Nomenclature ..........................................................................2

Lumen Maintenance .................................................................................2

Environmental Compliance ...........................................................................2

Performance Characteristics ......................................................................3

Product Selection Guide..............................................................................3

Electrical and Thermal Characteristics..................................................................4

Absolute Maximum Ratings .......................................................................5

Characteristic Curves .............................................................................6

Spectral Power Distribution Characteristics .............................................................6

Light Output Characteristics ..........................................................................7

Forward Current Characteristics.......................................................................9

Radiation Pattern Characteristics .....................................................................13

Product Bin and Labeling Denitions ..............................................................18

Decoding Product Bin Labeling.......................................................................18

Luminous Flux Bins .................................................................................19

Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Dominant and Peak Wavelength Bins .................................................................21

Color Bin Denitions ................................................................................22

Forward Voltage Bins ...............................................................................23

Mechanical Dimensions..........................................................................24

Reow Soldering Guidelines ......................................................................26

JEDEC Moisture Sensitivity ...........................................................................26

Solder Pad Design ..................................................................................27

Packaging Information...........................................................................28

Pocket Tape Dimensions ............................................................................28

Reel Dimensions ...................................................................................29

General Product Information

Product Test Conditions

LUXEON Rebel Color Line LEDs are tested and binned with a DC drive current and junction temperature specied below:

LUXEON Rebel Lime – 350mA, Tj=85°C

LUXEON Rebel ES Blue and LUXEON Rebel ES Royal Blue – 700mA, Tj=25°C

All other colors – 350mA, Tj=25°C

Part Number Nomenclature

Part numbers for LUXEON Rebel Color Line follow the convention below:

L X M L – P A 0 B – C C C C

L X M 2 – P A 0 B – C C C C

L X M 3 – P A 0 B – C C C C

L X M 5 – P A 0 B

Where:

A – designates color (X=Lime, M=Green, E=Cyan, B=Blue, R=Royal Blue, F=Far Red, D=Deep Red and Red,

H=Red-Orange, L=PC Amber and Amber, B=Blue, R=Royal Blue )

B – designates diode size (1=1mm2 and 2=2mm2)

C C C C – designates minimum luminous ux (lm) or radiometric power (mW) performance (see Product

Selection Guide)

Therefore, the following part number is used for a LUXEON Rebel Red, 1mm2 diode size, with a minimum luminous ux of 50:

L X M 2 – P D 0 1 – 0 0 5 0

Lumen Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel

Color Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,

namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the

following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or

polybrominated diphenyl ethers (PBDE).

Performance Characteristics

Product Selection Guide

Table 1. Product performance of LUXEON Rebel Color Line at test conditions.

COLOR

DOMINANT [1, 2] or

PEAK WAVELENGTH [2] (nm)

LUMINIOUS FLUX [1, 3] (lm) or

RADIOMETRIC POWER [3] (mW) TEST CURRENT

(mA) PART NUMBER

MINIMUM MAXIMUM MINIMUM TYPICAL

Far Red 720 750 210 260 350 LXML-PF01

Deep Red 650 670 270 360 350 LXM3-PD01

Red

620 645 60 62 350 LXM2-PD01-0060

620 645 50 53 350 LXM2-PD01-0050

620 645 40 48 350 LXM2-PD01-0040

620 645 50 52 350 LXML-PD01-0050

620 645 40 46 350 LXML-PD01-0040

620 645 30 38 350 LXML-PD01-0030

620 645 50 64 350 LXM5-PD01

Red-Orange

610 620 70 72 350 LXM2-PH01-0070

610 620 60 67 350 LXM2-PH01-0060

610 620 60 62 350 LXML-PH01-0060

610 620 50 56 350 LXML-PH01-0050

610 620 50 90 350 LXM5-PH01

PC Amber 594 604 80 110 350 LXM2-PL01-0000

Amber

585 595 60 61 350 LXML-PL01-0060

585 595 50 54 350 LXML-PL01-0050

585 595 40 48 350 LXML-PL01-0040

585 595 30 38 350 LXML-PL01-0030

585 595 50 74 350 LXM5-PL01

Lime 566 569 140 184 350 LXML-PX02-0000

Green

520 540 100 102 350 LXML-PM01-0100

520 540 90 95 350 LXML-PM01-0090

520 540 80 88 350 LXML-PM01-0080

520 540 70 79 350 LXML-PM01-0070

Cyan

490 515 80 83 350 LXML-PE01-0080

490 515 70 76 350 LXML-PE01-0070

490 515 60 67 350 LXML-PE01-0060

Blue

460 485 40 41 350 LXML-PB01-0040

460 485 30 35 350 LXML-PB01-0030

460 485 23 28 350 LXML-PB01-0023

460 485 18 22 350 LXML-PB01-0018

460 485 50 74 700 LXML-PB02

Royal Blue

440 460 500 520 350 LXML-PR01-0500

440 460 1100 1120 700 LXML-PR02-1100

440 460 1050 1070 700 LXML-PR02-1050

440 460 1000 1030 700 LXML-PR02-1000

440 460 950 970 700 LXML-PR02-0950

440 460 900 940 700 LXML-PR02-0900

440 460 800 890 700 LXML-PR02-0800

440 460 900 1030 700 LXML-PR02-A900 [4]

Notes for Table 1:

1. Lumileds maintains a tolerance of ±0.5nm for dominant wavelength and ±6.5% on luminous ux measurements..

2. Far Red, Deep Red and Royal Blue are binned by peak wavelength and all other colors by dominant wavelength.

3. Far Red, Deep Red and Royal Blue are binned by radiometric power and all other colors by luminous ux.

4. LXML-PR02-A900 is a selection of color bins 4 and 5 only.

Table 2. Optical characteristics for LUXEON Rebel Color Line at test conditions.

COLOR PART NUMBER

TYPICAL SPECTRAL

HALF-WIDTH [1]

(nm)

TYPICAL TEMPERATURE

COEFFICIENT OF DOMINANT

or PEAK WAVELENGTH

(nm/°C)

TYPICAL TOTAL

INCLUDED

ANGLE [2]

TYPICAL

VIEWING

ANGLE [3]

Far Red LXML-PF01 [4] 30 0.17 145° 125°

Deep Red LXM3-PD01 [4] 20 0.05 145° 125°

Red

LXM2-PD01 [4, 6] 20 0.05 145° 125°

LXML-PD01 [4, 6] 20 0.05 145° 125°

LXM5-PD01 [4, 6] 20 0.05 145° 125°

Red-Orange

LXM2-PH01 [4, 6] 20 0.08 145° 125°

LXML-PH01 [4, 6] 20 0.08 145° 125°

LXM5-PH01 [4, 6] 20 0.08 145° 125°

PC Amber LXM2-PL01 [5] 80 -0.01 140° 120°

Amber LXML-PL01 [4, 6] 20 0.10 145° 125°

LXM5-PL01 [4, 6] 20 0.10 145° 125°

Lime LXML-PX02 [5] 100 0.01 145° 125°

Green LXML-PM01 [5] 30 0.05 145° 125°

Cyan LXML-PE01 [5] 30 0.04 145° 125°

Blue LXML-PB01 [5] 20 0.05 145° 125°

LXML-PB02 [5] 20 0.05 145° 125°

Royal Blue LXML-PR01 [5] 20 0.04 145° 125°

LXML-PR02 [5] 20 0.04 145° 125°

Notes for Table 2:

1. Spectral width at ½ of the peak intensity.

2. Total angle at which 90% of total luminous ux is captured.

3. Viewing angle is the o axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

4. Far Red, Deep Red, Red, Red-Orange and Amber products are built with aluminum indium gallium phosphide (AlInGaP).

5. PC Amber, Lime, Green, Cyan, Blue and Royal Blue products are built with Indium Gallium Nitride (InGaN).

6. Wavelength ranges for hot tested Red, Red-Orange and Amber have been dened to align with typical changes in spectral output at increased temperature.

Electrical and Thermal Characteristics

Table 3. Electrical and thermal characteristics for LUXEON Rebel Color Line at test conditions.

COLOR PART NUMBER

FORWARD VOLTAGE [1] (Vf)TYPICAL TEMPERATURE

COEFFICIENT OF FORWARD

VOLTAGE [2] (mV/°C)

TYPICAL THERMAL

RESISTANCE—JUNCTION

TO SOLDER PAD (°C/W)

MINIMUM TYPICAL MAXIMUM

Far Red LXML-PF01 1.60 1.80 2.40 -2.0 to -4.0 5.50

Deep Red LXM3-PD01 1.80 2.10 2.80 -2.0 to -4.0 8.00

Red

LXM2-PD01 1.80 2.10 2.80 -2.0 to -4.0 8.00

LXML-PD01 2.31 2.90 3.51 -2.0 to -4.0 12.00

LXM5-PD01 1.80 2.10 2.60 -2.0 to -4.0 7.00

Red-Orange

LXM2-PH01 1.80 2.10 2.80 -2.0 to -4.0 8.00

LXML-PH01 2.31 2.90 3.51 -2.0 to -4.0 12.00

LXM5-PH01 1.80 2.10 2.60 -2.0 to -4.0 7.00

PC Amber LXM2-PL01 2.55 3.05 3.51 -2.0 to -4.0 10.00

Amber LXML-PL01 2.31 2.90 3.51 -2.0 to -4.0 12.00

LXM5-PL01 1.80 2.10 2.60 -2.0 to -4.0 7.00

Lime LXML-PX02 2.60 2.75 3.00 -2.0 to -4.0 6.00

Green LXML-PM01 2.55 3.21 3.51 -2.0 to -4.0 10.00

Cyan LXML-PE01 2.55 3.17 3.51 -2.0 to -4.0 10.00

Blue LXML-PB01 2.55 2.95 3.51 -2.0 to -4.0 10.00

LXML-PB02 2.50 2.95 3.50 -2.0 to -4.0 6.00

Royal Blue LXML-PR01 2.55 2.95 3.51 -2.0 to -4.0 10.00

LXML-PR02 2.50 2.90 3.50 -2.0 to -4.0 6.00

Notes for Table 3:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

2. Measured between 25°C and 110°C.

Absolute Maximum Ratings

Table 4a. Absolute maximum ratings for LUXEON Rebel Color Line at Tj=25°C.

PARAMETER GREEN/CYAN/

BLUE/ROYAL BLUE

ES BLUE/

ES ROYAL BLUE

FAR RED/

DEEP RED/RED/

RED-ORANGE/AMBER

PC AMBER

DC Forward Current [1, 2] 1000mA 1000 700mA 700mA

Peak Pulsed Forward Current [1, 3] 1000mA 1200 700mA 700mA

LED Junction Temperature [1] (DC & Pulse) 150°C 150°C 135°C 130°C

ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3A Class 3A Class 3A Class 3A

Operating Case Temperature [1] -40°C to 135°C -40°C to 135°C -40°C to 120°C -40°C to 110°C

LED Storage Temperature -40°C to 135°C -40°C to 135°C -40°C to 135°C -40°C to 135°C

Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C

Allowable Reow Cycles 3333

Autoclave Conditions -121°C at 2 ATM

100% Relative Humidity for 96 Hours Maximum

Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias

Notes for Table 4a:

1. Proper current derating must be observed to maintain the junction temperature below the maximum.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum

allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding

maximum junction temperature.

3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.

Table 4b. Absolute maximum ratings for LUXEON Rebel Color Line at Tj=85°C.

PARAMETER LIME

DC Forward Current [1, 2] 1000

Peak Pulsed Forward Current [1, 3] 1200

LED Junction Temperature [1] (DC & Pulse) 150°C

ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3A

Operating Case Temperature [1] -40°C to 135°C

LED Storage Temperature -40°C to 135°C

Soldering Temperature JEDEC 020c 260°C

Allowable Reow Cycles 3

Autoclave Conditions 100% Relative Humidity for 96 Hours Maximum

Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias

Notes for Table 4b:

1. Proper current derating must be observed to maintain the junction temperature below the maximum.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” with frequencies ≥100Hz and amplitude ≤15% of the maximum

allowable DC forward current are acceptable, assuming the average current throughout each cycle does not exceed the maximum allowable DC forward current at the corresponding

maximum junction temperature.

3. Pulsed operation with a peak drive current equal to the stated peak pulsed forward current is acceptable if the pulse on-time is ≤5ms per cycle and the duty cycle is ≤50%.

Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1a. Typical normalized power vs. wavelength for LUXEON Rebel Far Red, Deep Red, Red, Red-Orange,

PC Amber, Amber, Green, Cyan, Blue and Royal Blue at test current, Tj=25°C.

Figure 1b. Typical normalized power vs. wavelength for LUXEON Rebel PC Amber and Lime at 350mA, test temperature.

Light Output Characteristics

Figure 2b. Typical normalized light output vs. junction temperature for LXML-PF01, LXM3-PD01,

LXM2-PD01, LXML-PD01, LXM2-PH01, LXML-PH01, LXM2-PL01, LXML-PL01 at test current.

Figure 2a. Typical normalized light output vs. junction temperature for LXML-PM01,

LXML-PE01, LXML-PB01, LXML-PB02, LXML-PR01 and LXML-PR02 at test current.

0.8

0.9

1.0

1.1

1.2

e Luminous/Radiant Flux

LUXEON Rebel ES Blue (LXML-PB02)

& Blue (LXML-PB01) Photometric

0.5

0.6

0.7

-20 0 20 40 60 80 100 120 140

Relati

Thermal Pad Temperature (°C)

Green (LXML-PM01) & Cyan (LXML-

PE01) Photometric

LUXEON Rebel ES Royal-Blue (LXML-

PR02) & Royal-Blue (LXML-PR01)

Radiometric

0.00

0.25

0.50

0.75

1.00

1.25

1.50

1.75

-20 020 40 60 80 100

Relative Luminous Flux Output

Thermal Pad Temperature (°C)

Red (LXML-PD01 & LXM2-PD01)

Red-Orange (LXML-PH01 & LXM2-PH01)

Amber (LXML-PL01)

PC Amber (LXM2-PL01)

Far Red (LXML-PF01)

Deep Red (LXM3-PD01

Figure 2d. Typical normalized light output vs. junction temperature for

LXM5-PD01, LXM5-PH01 and LXM5-PL01 at test current.

0.2

0.4

0.6

0.8

1.2

0 20 40 60 80 100 120 140

Relative Luminous Flux

Junction Temperature (°C)

Red (LXM5-PD01)

Red Orange (LXM5-PH01)

Amber (LXM5-PL01)

Figure 2c. Typical normalized light output vs. junction temperature for LXML-PF01 at test current.

0.00

0.25

0.50

0.75

1.00

1.25

1.50

1.75

020 40 60 80 100 120 140

Relative Luminous Flux Output

Junction Temperature (

Far Red (LXML-PF01)

Figure 2e. Typical normalized light output vs. junction temperature for LXML-PX02 at test current.

0.7

0.8

0.9

1.0

1.1

1.2

25 50 75 100 125 150

Relative Luminous Flux

Thermal Pad Temperature (°C)

Lime (LXML-PX02)

Forward Current Characteristics

Figure 3a. Typical forward current vs. forward voltage for LXML-PX02, LXML-Px01 and LXML-Px02 at test temperature.

200

400

600

800

1000

2.3 2.5 2.7 2.9 3.1 3.3

Forward Current (mA)

Forward Voltage (V)

ES Royal Blue and ES Blue (LXML-

Px02)

Green, Cyan, Blue and Royal Blue

(LXML-Px01)

Lime (LXML-PX02)

Figure 3b. Typical forward current vs. forward voltage for LXML-PF01, LXM3-PD01, LXM2-PD01, LXM5-PD01,

LXML-PD01, LXM2-PH01, LXM5-PH01, LXML-PH01, LXM2-PL01, LXM5-PL01 and LXML-PL01 at test temperature.

100

200

300

400

500

600

700

800

900

1000

1.6 2.1 2.6 3.1 3.6

Forward Current (mA)

Forward Voltage (V)

Red (LXM5-PD01), Red-Orange (LXM5-PH01) & Amber (LXM5-PL01)

Red (LXML2-PD01) & Red Orange (LXM2-PH01)

Red (LXML-PD01), Red-Orange (LXML-PH01) & Amber (LXML-PL01)

PC Amber (LXM2-PL01)

Far Red (LXML-PF01)

Deep Red (LXM3-PD01)

Figure 3c. Relative luminous ux or radiometric power vs. forward current

for LXML-PB02 and LXML-PR02 at test temperature.

1.6

1.8

1.2

1.4

iant Flux

0.8

ative Rad

0.6

Rel

LUXEON Rebel ES Royal Blue (LXML-PR02)

and ES Blue (LXML-PB02)

0.2

0 200 400 600 800 1000 1200 1400 1600

Forward Current (mA)

Figure 3d. Relative luminous ux vs. forward current for LXML-PX02,

LXML-PM01, LXML-PB01 and LXML-PR01 at test temperature.

0.0

0.3

0.6

0.9

1.2

1.5

1.8

2.1

2.4

2.7

0 200 400 600 800 1000

Relative Luminous Flux

Forward Current (mA)

Blue (LXML-PB01)

Royal Blue (LXML-PR01)

Green (LXML-PM01)

Lime (LXML-PX02)

Figure 3e. Normalized luminous ux or radiometric power vs. forward current for LXML-PF01, LXM3-PD01, LXM2-PD01,

LXM5-PD01, LXML-PD01, LXM2-PH01, LXM5-PH01, LXML-PH01, LXM5-PL01 and LXML-PL01 at test temperature.

0.00

0.25

0.50

0.75

1.00

1.25

1.50

1.75

2.00

0100 200 300 400 500 600 700 800

Normalized Luminous Flux

Forward Current (mA)

Red (LXM2-PD01) & Red-Orange (LXM2-PH01)

Red (LXML-PD01), Red-Orange (LXML-PH01) & Amber (LXML-PL01)

Far Red (LXML-PF01)

Deep Red (LXM3-PD01)

Figure 3f. Relative luminous ux vs. forward current for LXM2-PL01 at test temperature.

2.00

1.50

1.75

1.25

ious Flux

0.75

1.00

ve Lumin

0.50

0.75

Relat

PC Amber (LXM2-PL01)

0 00

0.25

0 100 200 300 400 500 600 700

Forward Current (mA)

Radiation Pattern Characteristics

Figure 4a. Typical radiation pattern for LXML-PM01, LXML-PE01, LXML-PB01,

LXML-PB02, LXML-PR01 and LXML-PR02 at test conditions.

Figure 5a. Typical polar radiation pattern for LXML-PM01, LXML-PE01,

LXML-PB01, LXML-PB02, LXML-PR01 and LXML-PR02 at test conditions.

90%

100%

70%

80%

60%

70%

sity %

40%

50%

ative Inte

LUXEON Rebel ES Royal Blue (LXML-PR02)

and ES Blue (LXML-PB02)

20%

30%

Rel

green LXML-PM01, cyan LXML-PE01, blue

LXML-PB01 & royal blue LXML-PR01

10%

20%

-90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90

Angular Displacement (deg)

0°

30°-30°

60°

-60°

-1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0

LUXEON Rebel ES Royal Blue LXML-PR02

and ES Blue LXML-PB02

green LXML-PM01, cyan LXML-PE01, blue

LXML-PB01 & royal blue LXML-PR01

Figure 4b. Typical radiation pattern for LXM2-PD01, LXM5-PD01, LXML-PD01, LXM2-PH01,

LXM5-PH01, LXML-PH01, LXM5-PL01 and LXML-PL01 at test conditions.

Figure 5b. Typical polar radiation pattern for LXM2-PD01, LXML-PD01,

LXM2-PH01, LXML-PH01 and LXML-PL01 at test conditions.

40%

50%

60%

70%

80%

90%

100%

elative Intensity %

10%

20%

30%

-90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90

Angular Displacement deg

Red (LXM2-PD01, LXM5-PD01), Red-Orange

(LXM2-PH01, LXM5-PH01) & Amber (LXM5-PL01)

red LXML-PD01, red-orange

LXML-PH01 & amber LXML-PL01

0°

‐30

‐60°

‐1.0 ‐0.8 ‐0.6 ‐0.4 ‐0.2 0.0 0.2 0.4 0.6 0.8 1.0

redLXM2‐PD01&red‐orangeLXM2‐PH01

redLXML‐PD01,red‐orange

LXML‐PH01&amberLXML‐PL01

Figure 4c. Typical radiation pattern for LXML-PF01 at test conditions.

Figure 5c. Typical polar radiation pattern for LXML-PF01 at test conditions.

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

-90 -75 -60 -45 -30 -15 015 30 45 60 75 90

Relative Intensity %

Angular Displacement deg

Far Red (LXML-PF01)

-1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0

0°

30°-30°

60°

-60°

Far Red (LXML-PF01)

Figure 4d. Typical radiation pattern for LXM3-PD01 at test conditions.

Figure 5d. Typical polar radiation pattern for LXM3-PD01 at test conditions.

120%

80%

100%

)

60%

80%

tensity (

40%

Relative I

20%

Deep Red (LXM3

PD01)

-90 -60 -30 0 30 60 90

Angular Displacement (deg)

Deep Red (LXM3

PD01)

Angular Displacement (deg)

100

0°

-30°

090°-90°

120

-120°Deep Red (LXM3-PD01)

150

180

150

Figure 4e. Typical radiation pattern for LXM2-PL01 at test conditions.

Figure 5e. Typical polar radiation pattern for LXM2-PL01 at test conditions.

1.0

1.2

0.4

0.6

0.8

1.0

1.2

ative Intensity

0.0

0.2

0.4

0.6

0.8

1.0

1.2

-100 -80 -60 -40 -20 0 20 40 60 80 100

Relative Intensity

0.0

0.2

0.4

0.6

0.8

1.0

1.2

-100 -80 -60 -40 -20 0 20 40 60 80 100

Relative Intensity

Angular Displacement (degrees)

Product Bin and Labeling Denitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ux or radiometric power, color point, peak or

dominant wavelength and forward voltage.

Reels of LUXEON Rebel Far Red, Deep Red, Red, Red-Orange, PC Amber, Amber, Green, Cyan, Blue and Royal Blue are labeled

using a 3-digit alphanumeric CAT code following the format below:

A B C

Where:

A – designates luminous ux or radiometric power bin (example: Deep Red D=300 to 350 lumens,

Green K=70 to 80 lumens)

B – designates peak or dominant wavelength bin (example: Green 2=525 to 530nm, Cyan 2=495 to 500nm)

C – designates forward voltage bin (example: Far Red U=1.60 to 1.80V, Green B=2.55 to 2.79V)

Therefore, LUXEON Rebel Green with a lumen range of 70 to 80, a dominant wavelength of 525 to 530nm and a forward voltage

range of 2.55 to 2.79V has the following CAT code:

K 2 B

Reels of LUXEON Rebel Lime are labeled using a 4-digit alphanumeric CAT code following the format below:

A B C D

Where:

A – designates luminous ux bin (example: F=150 to 160 lumens, J=180 to 190 lumens, M=210 to 220 lumens)

B C – designates color bin (example: A0)

D – designates forward voltage bin (example: P=2.60 to 2.75V, R=2.75 to 3.00V)

Therefore, LUXEON Rebel Lime with a lumen range of 180 to 190, color bin A0 and a forward voltage range of 2.75 to 3.00V has

the following CAT code:

J A 0 R

Luminous Flux Bins

Tables 5a and 5b list the standard luminous ux bins for LUXEON Rebel Color Line emitters. Although several bins are outlined,

product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 5a. Luminous ux bin denitions for LUXEON Rebel Red, Red-Orange, PC Amber, Amber, Green, Cyan and Blue.

BIN LUMINOUS FLUX [1] (lm)

MINIMUM MAXIMUM

D 18 24

E 24 30

F 30 40

G 40 50

H 50 60

J 60 70

K 70 80

L 80 90

M 90 100

N 100 110

X 110 120

P 120 130

Y 130 140

Q 140 160

R 160 180

S 180 200

Notes for Table 5a:

1. Lumileds maintains a tolerance of ±6.5% on luminous ux measurements.

2. Tested and binned at test conditions.

Table 5b. Luminous ux bin denitions for LUXEON Rebel Lime.

BIN LUMINOUS FLUX [1] (lm)

MINIMUM MAXIMUM

E 140 150

F 150 160

G 160 170

H 170 180

J 180 190

K 190 200

L 200 210

M 210 220

Notes for Table 5b:

1. Lumileds maintains a tolerance of ±6.5% on luminous ux measurements.

2. Tested and binned at test conditions.

Radiometric Power Bins

Table 6a. Radiometric power bin denitions for LUXEON Rebel Royal Blue.

BIN RADIOMETRIC POWER [1] (mW)

MINIMUM MAXIMUM

D 350 425

E 425 500

F 500 600

G 600 700

H 700 800

J 800 900

K 900 950

Y 950 1000

A 1000 1050

B 1050 1100

M 1100 1200

N 1200 1300

P 1300 1400

Notes for Table 6a:

1. Lumileds maintains a tolerance of ±6.5% for radiometric power measurements.

2. Tested and binned at test conditions.

Table 6b. Radiometric power bin denitions for LUXEON Rebel Far Red and Deep Red.

BIN RADIOMETRIC POWER [1] (mW)

MINIMUM MAXIMUM

B 210 260

C 260 300

D 300 350

E 350 400

Notes for Table 6b:

1. Lumileds maintains a tolerance of ±6.5% for radiometric power measurements.

2. Tested and binned at test conditions.

Dominant and Peak Wavelength Bins

Table 7a. Dominant wavelength bin denitions for LUXEON Rebel Red, Red-Orange, Amber, Green, Cyan and Blue.

COLOR PART NUMBER BIN DOMINANT WAVELENGTH [1] (nm)

MINIMUM MAXIMUM

Red LXM2-PD01, LXM5-PD01

and LXML-PD01

4 620 630

5 630 645

Red-Orange LXM2-PH01, LXM5-PH01

and LXML-PH01 2 610 620

Amber LXM5-PL01

and LXML-PL01

1 585 587

2 587 590

4 590 592

6 592 595

Green LXML-PM01

1 520 525

2 525 530

3 530 535

4 535 540

Cyan LXML-PE01

1 490 495

2 495 500

3 500 505

4 505 510

5 510 515

Blue LXML-PB01

and LXML-PB02

1 460 465

2 465 470

3 470 475

4 475 480

5 480 485

Notes for Table 7a:

1. Lumileds maintains a tolerane of ±0.5nm for dominant wavelength measurements.

Table 7b. Peak wavelength bin denitions for LUXEON Rebel Far Red, Deep Red and Royal Blue.

COLOR PART NUMBER BIN PEAK WAVELENGTH [1] (nm)

MINIMUM MAXIMUM

Far Red LXML-PF01

1 720 730

2 730 740

3 740 750

Deep Red LXM3-PD01 6 650 660

7 660 670

Royal Blue

LXML-PR01

and

LXML-PR02

3 440 445

4 445 450

5 450 455

6 455 460

Notes for Table 7b:

1. Lumileds maintains a tolerane of ±2nm for peak wavelength measurements.

Color Bin Denitions

Table 8. Peak wavelength bin denitions for LUXEON Rebel PC Amber and Lime.

COLOR PART NUMBER BIN x y

PC Amber LXM2-PL01 2

0.5622 0.4372

0.5576 0.4326

0.5775 0.4132

0.5843 0.4151

Lime LXML-PX02 A0

0.3819 0.5055

0.4191 0.5790

0.4327 0.5655

0.3972 0.4986

Notes for Table 8:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Figure 6. Color bin structure for LUXEON Rebel PC Amber and Lime for Table 8.

0.4

0.45

0.5

0.55

0.6

0.36 0.41 0.46 0.51 0.56 0.61

ES Lime PC Amber

Forward Voltage Bins

Table 9. Forward voltage bin denitions for LUXEON Rebel Color Line at test conditions.

PART NUMBER BIN FORWARD VOLTAGE [1] (Vf)

MINIMUM MAXIMUM

Far Red - LXML-PF01

Deep Red - LXM3-PD01

Red - LXM2-PD01

Red - LXM5-PD01

Red-Orange - LXM2-PH01

Red-Orange - LXM5-PH01

Amber - LXM5-PL01

U 1.60 1.80

V 1.80 2.00

W2.00 2.20

X 2.20 2.40

Y 2.40 2.60

Z 2.60 2.80

Lime - LXML-PX02

P 2.60 2.75

R 2.75 3.00

Red - LXML-PD01

Red-Orange - LXML-PH01

PC Amber - LXM2-PL01

Amber - LXML-PL01

Green - LXML-PM01

Cyan - LXML-PE01

Blue - LXML-PB01

Royal Blue - LXML-PR01

A 2.31 2.55

B 2.55 2.79

C 2.79 3.03

D 3.03 3.27

E 3.27 3.51

ES Blue - LXML-PB02

ES Royal Blue - LXML-PR02

P 2.50 2.75

R 2.75 3.00

S 3.00 3.25

T 3.25 3.50

Notes for Table 9:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

Mechanical Dimensions

Notes for Figure 7a:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 7a. Mechanical dimensions for LUXEON Rebel Color Line.

3.17

2.93

1.67

1.38

1.67

1.38

4.61

4.37

2.10

1.85

0.68

0.52

0.11

0.05

2.61

2.49

0.14

0.06

1.26

1.14

0.73

0.61

1.83

1.71

2.86

2.74

1.86

1.74

0.46

0.34

Notes for Figure 7b:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 7b. Mechanical dimensions for LUXEON Rebel ES Blue and LUXEON Rebel ES Royal Blue.

0.73

0.61

1.26

1.14

1.83

1.71

2.86

2.74

0.46

0.34

1.86

1.74

0.21

0.09

0.14

0.06

0.14

0.06

2.61

2.49

0.83

0.54

0.86

0.74

0.84

0.72

4.61

4.37

3.17

2.93

1.67

1.38

1.67

1.38 2.31

2.25

0.88

0.72

0.68

0.52

2.10

1.85

0.11

0.05

∅

Reow Soldering Guidelines

Table 10. Reow prole characteristics for LUXEON Rebel Color Line.

PROFILE FEATURE LEAD-FREE ASSEMBLY

Preheat Minimum Temperature (Tsmin) 150°C

Preheat Maximum Temperature (Tsmax) 200°C

Preheat Time (tsmin to tsmax) 60 to 180 seconds

Ramp-Up Rate (TL to Tp)3°C / second maximum

Liquidus Temperature (TL) 217°C

Time Maintained Above Temperature TL (tL) 60 to 150 seconds

Peak / Classication Temperature (Tp) 260°C

Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds

Ramp-Down Rate (Tp to TL)6°C / second maximum

Time 25°C to Peak Temperature 8 minutes maximum

JEDEC Moisture Sensitivity

Table 11. Moisture sensitivity levels for LUXEON Rebel Color Line.

LEVEL FLOOR LIFE SOAK REQUIREMENTS STANDARD

TIME CONDITIONS TIME CONDITIONS

1 Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH

Time 25ºC to Peak

JEDEC J-STD-020D

Critical Zone

TL to Tp

Ramp-up

Ramp-down

Temperature

Time

Preheat Area

Tsmax

Tsmin

Figure 8. Visualization of the acceptable reow temperature prole as specied in Table 10.

Solder Pad Design

Notes for Figure 9a:

1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.

2. Drawings are not to scale.

Notes for Figure 9b:

3. The photograph shows the recommended LUXEON Rebel Color Portfolio layout on printed circuit board (PCB). This design easily achieves a thermal resistance of 7K/W.

4. Drawings are not to scale.

Figure 9a. LUXEON Rebel Color Line pad conguration.

TOP

BOTTOM 3THERMAL

2ANODE

1CATHODE

PA DFUNCTION

Figure 9b. LUXEON Rebel Color Line solder pad design.

Packaging Information

Pocket Tape Dimensions

Notes for Figure 10:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 10. Pocket tape dimensions for LUXEON Rebel Color Line.

1000

Reel Dimensions

Notes for Figure 11:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 11. Reel dimensions for LUXEON Rebel Color Line.

DS68 LUXEON Rebel Color Line

Product Datasheet 20171106

LUXEON is a registered trademark of the Lumileds

Holding B.V. in the United States and other countries.

lumileds.com

Neither Lumileds Holding B.V. nor its aliates shall be liable for any kind of loss of data or any other damages,

direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds

Holding B.V. and/or its aliates have attempted to provide the most accurate information and data, the materials

and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its aliates

warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding

B.V. and its aliates reserve the right to make changes without notice. You as user agree to this disclaimer and

user agreement with the download or use of the provided materials, information and data. A listing of Lumileds

product/patent coverage may be accessed at lumileds.com/patents.

About Lumileds

Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with

them to push the boundaries of light. With over 100 years of inventions and industry rsts, Lumileds is a global lighting solutions

company that helps customers around the world deliver dierentiated solutions to gain and maintain a competitive edge. As the

inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,

quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is

making the world safer, better and more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Lumileds:

LXM3-PD01 LXML-PR02-A900 LXML-PL01-0040 LXML-PE01-0060 LXML-PE01-0080 LXML-PB01-0030 LXML-

PB01-0040 LXML-PB02 LXML-PR01-0500 LXML-PM01-0090 LXML-PM01-0100 LXML-PE01-0070 LXM2-PD01-

0040 LXM2-PD01-0050 LXM2-PH01-0060 LXM2-PH01-0070 LXML-PL01-0050 LXML-PL01-0060 LXML-PX02-0000

LXML-PR01-0275 LXML-PR01-0425 LXM2-PL01-0000 LXML-PH01-0050 LXM5-PD01 LXM5-PH01 LXM5-PL01