Specifications are subject to change without notice (06.09.99) 1
• 8-channel receiver
• Optoisolated NPN (sink) or PNP (source)
transistor outputs
• Load: 8 x 0.7 A/60 VDC
• Reverse-polarity protection
• H4-housing
• For mounting on DIN-rail (EN 50022)
• LED-indications for supply and Dupline carrier
• AC or DC power supply
• Channel coding by GAP 1605
Product Description Ordering Key
Type: Dupline
H4-housing
Receiver
No. of channels
Output type
Power supply
Dupline®Field- and Installationbus
Receiver for Digital Signals
Types G 3430 5511, G 3430 5521
Dupline receiver.
Open collector NPN or PNP
Type Selection
Supply Ordering no. Ordering no.
8 channels 8 channels
0.7 A/60 VDC 0.7 A/60 VDC
NPN transistor PNP transistor
24 VAC G 3430 5511 024 G 3430 5521 024
115 VAC G 3430 5511 115 G 3430 5521 115
230 VAC G 3430 5511 230 G 3430 5521 230
10 to 30 VDC G 3430 5511 800 G 3430 5521 800
transistor outputs for control
of loads up to 60 VDC/0.7 A.
Output Specifications
G 3430 5511 ... G 3430 5521 ...
(8 channels) (8 channels)
Outputs
8 NPN transistors 8 PNP transistors
Isolated in groups of 1 x 8 1 x 8
Output voltage range VBB 6 to 60 VDC 6 to 60 VDC
Reverse-polarity protection Yes Yes
Current per output (25°C) ≤0.7 A ≤0.7 A
Total load capability (25°C) 51% 51%
Short-circuit protection None None
Built-in protective diodes None None
Off-state leakage current ≤100 µA ≤100 µA
Output voltage drop ≤1.5 VDC ≤1.5 VDC
Dielectric voltage
Outputs - Dupline ≥4 kVAC (rms) ≥4 kVAC (rms)
G 3430 5521 024
2Specifications are subject to change without notice (06.09.99)
Power ON delay Typ. 2 s
Power OFF delay ≤1 s
Output OFF delay
upon loss of Dupline carrier ≤20 ms
Indication for
Supply ON LED, green
Dupline carrier LED, yellow
Environment
Degree of protection IP 20
Pollution degree 3 (IEC 60664)
Operating temperature -20° to +50°C (-4° to +122°F)
Storage temperature
-50° to +85°C (-58° to +185°F)
Humidity (non-condensing) 20 to 80%
Mechanical resistance
Shock 15 G (11 ms)
Vibration 2 G (6 to 55 Hz)
Dimensions
Material
(see Technical information) 4H-housing
Weight
AC types 250 g
DC types 200 g
G 3430 5511, G 3430 5521
Supply Specifications
Power supply AC types
Overvoltage cat. III (IEC 60664)
Rated operational voltage
terminals 21 & 22 230 230 VAC ± 15% (IEC 60038)
115 115 VAC ± 15% (IEC 60038)
024 24 VAC ± 15%
Frequency 45 to 65 Hz
Voltage interruption ≤40 ms
Rated operational power Typ. 3.5 VA
Rated impulse withstand
voltage 230 4 kV
115 2.5 kV
024 800 V
Dielectric voltage
Supply - Dupline ≥4 kVAC (rms)
Supply - Outputs ≥4 kVAC (rms)
General Specifications Mode of Operation
G 3430 55.1 ...
8-channel receivers with 8
open collector NPN or PNP
outputs
Each output may be coded
individually by means of the
code programmer GAP 1605.
See separate data sheet.
The outputs are normally off.
When a transmitter coded to
the selected channel is acti-
vated, the output turns on
and remains on until the
respective channel becomes
deactivated (interruption or
short-circuiting of Dupline
carrier).
Power supply DC types
Overvoltage cat. III (IEC 60664)
Rated operational voltage
terminals 21 & 22 800 10 to 30 VDC
(ripple included)
Ripple ≤3 V
Reverse-polarity protection Yes
Rated operational current ≤150 mA
Inrush current ≤1 A
Rated impulse withstand
voltage 800 V
Dielectric voltage
Supply - Dupline ≥200 VAC (rms)
Supply - Outputs ≥4 kVAC (rms)
Operation Diagram
Dupline carrier
Transmission on channel for output 1
Output 1 (terminal 25)
Transm. on chan. for output 2
Power supply
Output 2 (terminal 26)
Specifications are subject to change without notice (06.09.99) 3
(+) (-)
G 3430 5511, G 3430 5521
Derating Curve
The curve shows the current
allowed per output at differ-
ent temperatures. The dotted
line indicates the total load
capability per receiver at dif-
ferent temperatures.
Wiring Diagrams
G 3430 5521 ... 8 channels
Open collector PNP transistor ouput
G 3430 5511 ... 8 channels
Open collector NPN transistor output
VBB
VBB
(+) (-)
VBB
VBB
Ch. 1, 2, 3, 4Ch. 1, 2, 3, 4
Ch. 5, 6, 7, 8
Ch. 5, 6, 7, 8
Power
supply
Power
supply
S: Signal wire S: Signal wire
Accessories
DIN-rail FMD 411
For further information, see "Accessories".
