Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EEE-111 –
010
Sleeve
14 min.
3 min.
L=
06.3
=L16 : L±1.0
L20 : L±2.0
Pressure relief +
–
08
0D+0.5
F±0.5
0D+0.5
fd±0.05
■ Features
● Endurance : 85 °C 2000 h
● Smaller than series SU
● RoHS directive compliant
Radial Lead Type
Series: M Type: A
■ Speci cations
Category Temp. Range –40 °C to + 85 °C –25 °C to +85 °C
Rated W.V. Range 6.3 V.DC to 10 0 V.DC 160 V.DC to 450 V.DC
Nominal Cap. Range 2.2 μF to 22000 μF 1 μF to 470 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes
(Whichever is greater) I < 0.06 CV +10 (μA) After 2 minutes
tan dPlease see the attached standard products list
Endurance
After applying rated working voltage for 2000 hours at +85°C±2 °C, when the capacitors are
restored to 20 °C, capacitors shall meet the following limits.
Capacitance change ±20 % of initial measured value
tan d<150 % of initial specifi ed value
DC leakage current <initial specifi ed value
Shelf Life After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■ Di men sions in mm (not to scale)
Body Dia. 0D5 6.3 8 1012.516 18
Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■ Frequency correction factor for ripple current
(Unit : mm)
03 Mar. 2015
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EEE-112 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
6.3
220 5 11 240 0.28 0.5 2.0 5.0 2.5 ECA0JM221( ) 200 2000
470 6.3 11.2 380 0.28 0.5 2.5 5.0 2.5 ECA0JM471( ) 200 2000
1000 8 11.5 580 0.28 0.6 3.5 5.0 ECA0JM102( ) 200 1000
2200 10 16 890 0.30 0.6 5.0 5.0 ECA0JM222( ) 200 500
3300 10 20 1020 0.32 0.6 5.0 5.0 ECA0JM332( ) 200 500
4700 12.5 20 1170 0.34 0.6 5.0 5.0 ECA0JM472( ) 200 500
6800 12.5 25 1270 0.38 0.6 5.0 5.0 ECA0JM682( ) 200 500
10000 16 25 1450 0.46 0.8 7.5 7.5 ECA0JM103( ) 100 250
15000 16 31.5 1700 0.56 0.8 7.5 ECA0JM153 100
22000 18 35.5 1900 0.70 0.8 7.5 ECA0JM223 50
10
330 6.3 11.2 330 0.24 0.5 2.5 5.0 2.5 ECA1AM331( ) 200 2000
1000 10 12.5 630 0.24 0.6 5.0 5.0 ECA1AM102( ) 200 500
2200 10 20 920 0.26 0.6 5.0 5.0 ECA1AM222( ) 200 500
3300 12.5 20 1090 0.28 0.6 5.0 5.0 ECA1AM332( ) 200 500
4700 12.5 25 1200 0.30 0.6 5.0 5.0 ECA1AM472( ) 200 500
6800 16 25 1400 0.34 0.8 7.5 7.5 ECA1AM682( ) 100 250
10000 16 31.5 1600 0.42 0.8 7.5 ECA1AM103 100
15000 18 35.5 1850 0.52 0.8 7.5 ECA1AM153 50
16
10 5 11 30 0.20 0.5 2.0 5.0 2.5 ECA1CM100( ) 200 2000
22 5 11 75 0.20 0.5 2.0 5.0 2.5 ECA1CM220( ) 200 2000
33 5 11 110 0.20 0.5 2.0 5.0 2.5 ECA1CM330( ) 200 2000
47 5 11 130 0.20 0.5 2.0 5.0 2.5 ECA1CM470( ) 200 2000
100 5 11 180 0.20 0.5 2.0 5.0 2.5 ECA1CM101( ) 200 2000
220 6.3 11.2 280 0.20 0.5 2.5 5.0 2.5 ECA1CM221( ) 200 2000
470 8 11.5 440 0.20 0.6 3.5 5.0 ECA1CM471( ) 200 1000
1000 10 16 680 0.20 0.6 5.0 5.0 ECA1CM102( ) 200 500
2200 12.5 20 1000 0.22 0.6 5.0 5.0 ECA1CM222( ) 200 500
3300 12.5 25 1200 0.24 0.6 5.0 5.0 ECA1CM332( ) 200 500
4700 16 25 1360 0.26 0.8 7.5 7.5 ECA1CM472( ) 100 250
6800 16 31.5 1600 0.30 0.8 7.5 ECA1CM682 100
10000 18 35.5 1800 0.38 0.8 7.5 ECA1CM103 50
25
100 6.3 11.2 180 0.16 0.5 2.5 5.0 2.5 ECA1EM101( ) 200 2000
330 8 11.5 390 0.16 0.6 3.5 5.0 ECA1EM331( ) 200 1000
470 10 12.5 480 0.16 0.6 5.0 5.0 ECA1EM471( ) 200 500
1000 10 20 850 0.16 0.6 5.0 5.0 ECA1EM102( ) 200 500
2200 12.5 25 1200 0.18 0.6 5.0 5.0 ECA1EM222( ) 200 500
3300 16 25 1300 0.20 0.8 7.5 7.5 ECA1EM332( ) 100 250
4700 16 31.5 1500 0.22 0.8 7.5 ECA1EM472 100
6800 18 35.5 1750 0.26 0.8 7.5 ECA1EM682 50
35
47 5 11 130 0.14 0.5 2.0 5.0 2.5 ECA1VM470( ) 200 2000
100 6.3 11.2 210 0.14 0.5 2.5 5.0 2.5 ECA1VM101( ) 200 2000
220 8 11.5 350 0.14 0.6 3.5 5.0 ECA1VM221( ) 200 1000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 85 °C 2000 h
03 Mar. 2015
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EEE-113 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
35
330 10 12.5 440 0.14 0.6 5.0 5.0 ECA1VM331( ) 200 500
470 10 16 550 0.14 0.6 5.0 5.0 ECA1VM471( ) 200 500
1000 12.5 20 900 0.14 0.6 5.0 5.0 ECA1VM102( ) 200 500
2200 16 25 1250 0.16 0.8 7.5 7.5 ECA1VM222( ) 100 250
3300 16 31.5 1400 0.18 0.8 7.5 ECA1VM332 100
4700 18 35.5 1600 0.20 0.8 7.5 ECA1VM472 50
50
2.2 5 11 20 0.12 0.5 2.0 5.0 2.5 ECA1HM2R2( ) 200 2000
3.3 5 11 35 0.12 0.5 2.0 5.0 2.5 ECA1HM3R3( ) 200 2000
4.7 5 11 45 0.12 0.5 2.0 5.0 2.5 ECA1HM4R7( ) 200 2000
10 5 11 65 0.12 0.5 2.0 5.0 2.5 ECA1HM100( ) 200 2000
22 5 11 100 0.12 0.5 2.0 5.0 2.5 ECA1HM220( ) 200 2000
33 5 11 110 0.12 0.5 2.0 5.0 2.5 ECA1HM330( ) 200 2000
47 6.3 11.2 130 0.12 0.5 2.5 5.0 2.5 ECA1HM470( ) 200 2000
100 8 11.5 250 0.12 0.6 3.5 5.0 ECA1HM101( ) 200 1000
220 10 12.5 400 0.12 0.6 5.0 5.0 ECA1HM221( ) 200 500
330 10 16 500 0.12 0.6 5.0 5.0 ECA1HM331( ) 200 500
470 10 20 650 0.12 0.6 5.0 5.0 ECA1HM471( ) 200 500
1000 12.5 25 1050 0.12 0.6 5.0 5.0 ECA1HM102( ) 200 500
2200 16 31.5 1300 0.14 0.8 7.5 ECA1HM222 100
3300 18 35.5 1500 0.16 0.8 7.5 ECA1HM332 50
63
10 5 11 70 0.11 0.5 2.0 5.0 2.5 ECA1JM100( ) 200 2000
22 5 11 105 0.11 0.5 2.0 5.0 2.5 ECA1JM220( ) 200 2000
33 6.3 11.2 130 0.11 0.5 2.5 5.0 2.5 ECA1JM330( ) 200 2000
47 6.3 11.2 160 0.11 0.5 2.5 5.0 2.5 ECA1JM470( ) 200 2000
100 8 11.5 270 0.11 0.6 3.5 5.0 ECA1JM101( ) 200 1000
220 10 16 450 0.11 0.6 5.0 5.0 ECA1JM221( ) 200 500
330 10 20 550 0.11 0.6 5.0 5.0 ECA1JM331( ) 200 500
470 12.5 20 750 0.11 0.6 5.0 5.0 ECA1JM471( ) 200 500
1000 16 25 1100 0.11 0.8 7.5 7.5 ECA1JM102( ) 100 250
2200 18 35.5 1400 0.13 0.8 7.5 ECA1JM222 50
100
2.2 5 11 30 0.10 0.5 2.0 5.0 2.5 ECA2AM2R2( ) 200 2000
3.3 5 11 40 0.10 0.5 2.0 5.0 2.5 ECA2AM3R3( ) 200 2000
4.7 5 11 50 0.10 0.5 2.0 5.0 2.5 ECA2AM4R7( ) 200 2000
10 5 11 70 0.10 0.5 2.0 5.0 2.5 ECA2AM100( ) 200 2000
22 6.3 11.2 115 0.10 0.5 2.5 5.0 2.5 ECA2AM220( ) 200 2000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 85 °C 2000 h
03 Mar. 2015
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EEE-114 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
100
33 8 11.5 145 0.10 0.6 3.5 5.0 ECA2AM330( ) 200 1000
47 8 11.5 180 0.10 0.6 3.5 5.0 ECA2AM470( ) 200 1000
100 10 16 350 0.10 0.6 5.0 5.0 ECA2AM101( ) 200 500
220 12.5 20 550 0.10 0.6 5.0 5.0 ECA2AM221( ) 200 500
330 12.5 25 700 0.10 0.6 5.0 5.0 ECA2AM331( ) 200 500
470 16 25 900 0.10 0.8 7.5 7.5 ECA2AM471( ) 100 250
1000 18 35.5 1300 0.10 0.8 7.5 ECA2AM102 50
160
1 6.3 11.2 36 0.16 0.5 2.5 5.0 2.5 ECA2CM010( ) 200 2000
2.2 6.3 11.2 53 0.16 0.5 2.5 5.0 2.5 ECA2CM2R2( ) 200 2000
3.3 6.3 11.2 66 0.16 0.5 2.5 5.0 2.5 ECA2CM3R3( ) 200 2000
4.7 6.3 11.2 78 0.16 0.5 2.5 5.0 2.5 ECA2CM4R7( ) 200 2000
10 10 12.5 105 0.16 0.6 5.0 5.0 ECA2CM100( ) 200 500
22 10 16 175 0.16 0.6 5.0 5.0 ECA2CM220( ) 200 500
33 10 20 235 0.16 0.6 5.0 5.0 ECA2CM330( ) 200 500
47 12.5 20 320 0.16 0.6 5.0 5.0 ECA2CM470( ) 200 500
100 12.5 25 515 0.16 0.6 5.0 5.0 ECA2CM101( ) 200 500
220 16 31.5 830 0.16 0.8 7.5 ECA2CM221 100
330 18 31.5 1090 0.16 0.8 7.5 ECA2CM331 50
470 18 40 1440 0.16 0.8 7.5 ECA2CM471 50
200
1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2DM010( ) 200 2000
2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 2.5 ECA2DM2R2( ) 200 2000
3.3 6.3 11.2 62 0.18 0.5 2.5 5.0 2.5 ECA2DM3R3( ) 200 2000
4.7 8 11.5 86 0.18 0.6 3.5 5.0 ECA2DM4R7( ) 200 1000
10 10 12.5 100 0.18 0.6 5.0 5.0 ECA2DM100( ) 200 500
22 10 20 180 0.18 0.6 5.0 5.0 ECA2DM220( ) 200 500
33 10 20 220 0.18 0.6 5.0 5.0 ECA2DM330( ) 200 500
47 12.5 20 300 0.18 0.6 5.0 5.0 ECA2DM470( ) 200 500
100 16 25 475 0.18 0.8 7.5 7.5 ECA2DM101( ) 100 250
220 18 31.5 835 0.18 0.8 7.5 ECA2DM221 50
330 18 40 1140 0.18 0.8 7.5 ECA2DM331 50
250
1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2EM010( ) 200 2000
2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 2.5 ECA2EM2R2( ) 200 2000
3.3 8 11.5 72 0.18 0.6 3.5 5.0 ECA2EM3R3( ) 200 1000
4.7 8 11.5 86 0.18 0.6 3.5 5.0 ECA2EM4R7( ) 200 1000
10 10 16 110 0.18 0.6 5.0 5.0 ECA2EM100( ) 200 500
22 10 20 180 0.18 0.6 5.0 5.0 ECA2EM220( ) 200 500
33 12.5 20 250 0.18 0.6 5.0 5.0 ECA2EM330( ) 200 500
47 12.5 25 330 0.18 0.6 5.0 5.0 ECA2EM470( ) 200 500
100 16 31.5 530 0.18 0.8 7.5 ECA2EM101 100
220 18 40 930 0.18 0.8 7.5 ECA2EM221 50
350 1 6.3 11.2 32 0.20 0.5 2.5 5.0 2.5 ECA2VM010( ) 200 2000
2.2 8 11.5 55 0.20 0.6 3.5 5.0 ECA2VM2R2( ) 200 1000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 85 °C 2000 h
03 Mar. 2015
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EEE-115 –
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
350
3.3 8 11.5 60 0.20 0.6 3.5 5.0 ECA2VM3R3( ) 200 1000
4.7 10 12.5 65 0.20 0.6 5.0 5.0 ECA2VM4R7( ) 200 500
10 10 20 115 0.20 0.6 5.0 5.0 ECA2VM100( ) 200 500
22 12.5 20 195 0.20 0.6 5.0 5.0 ECA2VM220( ) 200 500
33 16 25 300 0.20 0.8 7.5 7.5 ECA2VM330( ) 100 250
47 16 25 325 0.20 0.8 7.5 7.5 ECA2VM470( ) 100 250
100 18 31.5 535 0.20 0.8 7.5 ECA2VM101 50
400
1 6.3 11.2 32 0.20 0.5 2.5 5.0 2.5 ECA2GM010( ) 200 2000
2.2 8 11.5 50 0.20 0.6 3.5 5.0 ECA2GM2R2( ) 200 1000
3.3 10 12.5 54 0.20 0.6 5.0 5.0 ECA2GM3R3( ) 200 500
4.7 10 16 72 0.20 0.6 5.0 5.0 ECA2GM4R7( ) 200 500
10 10 20 115 0.20 0.6 5.0 5.0 ECA2GM100( ) 200 500
22 12.5 25 215 0.20 0.6 5.0 5.0 ECA2GM220( ) 200 500
33 16 25 275 0.20 0.8 7.5 7.5 ECA2GM330( ) 100 250
47 16 31.5 350 0.20 0.8 7.5 ECA2GM470 100
100 18 40 600 0.20 0.8 7.5 ECA2GM101 50
450
1 8 11.5 37 0.20 0.6 3.5 5.0 ECA2WM010( ) 200 1000
2.2 10 12.5 44 0.20 0.6 5.0 5.0 ECA2WM2R2( ) 200 500
3.3 10 16 60 0.20 0.6 5.0 5.0 ECA2WM3R3( ) 200 500
4.7 10 20 79 0.20 0.6 5.0 5.0 ECA2WM4R7( ) 200 500
10 12.5 20 130 0.20 0.6 5.0 5.0 ECA2WM100( ) 200 500
22 16 25 210 0.20 0.8 7.5 7.5 ECA2WM220( ) 100 250
33 16 31.5 285 0.20 0.8 7.5 ECA2WM330 100
■ Standard Prod ucts
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 85 °C 2000 h
03 Mar. 2015
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Panasonic:
ECA-1CM100I ECA-1CM102B ECA-1AM102B ECA-0JM471I ECA-0JM472B ECA-1CM470B ECA-2AM101B
ECA-1EM101B ECA-1EM101I ECA-1HM330I ECA-1HM471B ECA-1VM221B ECA-1HM100B ECA-1HM101B ECA-
1HM102B ECA-1HM221B ECA-1JM470I ECA-2EM220B ECA-2WM100B ECA-1VM471B ECA-1JM221B ECA-
1HM100I ECA-2AM221B ECA-1CM101I ECA-1CM220I ECA-1CM470I ECA-1CM471B ECA-0JM332B ECA-
0JM471B ECA-0JM682B ECA-1AM222B ECA-1AM331B ECA-1AM331I ECA-1AM332B ECA-1AM472B ECA-
1AM682B ECA-1CM100B ECA-1CM101B ECA-1CM220B ECA-1CM221B ECA-1CM221I ECA-1CM222B ECA-
1CM330B ECA-1CM330I ECA-1CM332B ECA-1CM472B ECA-1EM331B ECA-1EM332B ECA-1EM471B ECA-
1EM471E ECA-1HM220I ECA-1HM2R2B ECA-1HM2R2I ECA-1HM330B ECA-1HM331B ECA-1HM3R3B ECA-
1HM3R3I ECA-1HM470I ECA-1HM4R7B ECA-1JM100I ECA-1JM101B ECA-1JM220B ECA-1JM220I ECA-
1JM330B ECA-1JM330I ECA-1JM331B ECA-1JM470B ECA-1VM101B ECA-1VM220I ECA-1VM470B ECA-
1VM470I ECA-2AM100B ECA-2AM220B ECA-2AM220I ECA-2AM2R2B ECA-2AM2R2I ECA-2AM330B ECA-
2AM331B ECA-2AM3R3B ECA-2AM3R3I ECA-2AM471B ECA-2AM4R7I ECA-2CM010B ECA-2CM010I ECA-
2CM100B ECA-2CM101B ECA-2CM220B ECA-2CM2R2B ECA-2CM2R2I ECA-2CM330B ECA-2CM3R3B ECA-
2CM3R3I ECA-2CM4R7B ECA-2CM4R7I ECA-2DM010B ECA-2DM010I ECA-2DM100B ECA-2DM101B ECA-
2DM220B ECA-2DM2R2B
