This is information on a product in full production.
March 2014 DocID2143 Rev 32 1/58
L78
Positive voltage regulator ICs
Datasheet
-
production data
Features
Output current up to 1.5 A
Output voltages of 5; 6; 8; 8.5; 9; 12; 15; 18;
24 V
Thermal overload protection
Short circuit protection
Output transition SOA protection
2 % output voltage tolerance (A version)
Guaranteed in extended temperature range
(A version)
Description
The L78 series of three-terminal positive
regulators is available in TO-220, TO-220FP,
D²PAK and DPAK packages and several fixed
output voltages, making it useful in a wide range
of applications.
These regulators can provide local on-card
regulation, eliminating the distribution problems
associated with single point regulation. Each type
embeds internal current limiting, thermal shut-
down and safe area protection, making it
essentially indestructible. If adequate heat sinking
is provided, they can deliver over 1 A output
current. Although designed primarily as fixed
voltage regulators, these devices can be used
with external components to obtain adjustable
voltage and currents.
TO-220FPTO-220
D²PAK
DPAK
www.st.com
Contents Positive voltage regulator ICs
2/58 DocI D2143 Rev 32
Contents
1 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.1 Design consideration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
7 Typical performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
9 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
10 Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
DocID2143 Rev 32 3/58
Positive voltage regulator ICs List of tables
58
List of tables
Table 1. Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 2. Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 3. Electrical characteristics of L7805A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Table 4. Electrical characteristics of L7806A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Table 5. Electrical characteristics of L7808A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Table 6. Electrical characteristics of L7809A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Table 7. Electrical characteristics of L7812A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 8. Electrical characteristics of L7815A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Table 9. Electrical characteristics of L7824A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Table 10. Electrical characteristics of L7805C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Table 11. Electrical characteristics of L7806C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Table 12. Electrical characteristics of L7808C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Table 13. Electrical characteristics of L7885C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Table 14. Electrical characteristics of L7809C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Table 15. Electrical characteristics of L7812C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Table 16. Electrical characteristics of L7815C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Table 17. Electrical characteristics of L7818C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Table 18. Electrical characteristics of L7824C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Table 19. TO-220 (dual gauge) mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Table 20. TO-220 SG (single gauge) mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Table 21. TO-220FP mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Table 22. DPAK mechanical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Table 23. PAK (SMD 2L STD-ST) mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Table 24. D²PAK (SMD 2L Wooseok-subcon.) mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Table 25. DPAK and D²PAK tape and reel mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Table 26. Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Table 27. Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
List of figures Positive voltage regulator ICs
4/58 DocI D2143 Rev 32
List of figures
Figure 1. Block diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Figure 2. Pin connections (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Figure 3. Schematic diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Figure 4. Application circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Figure 5. DC parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 6. Load regulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 7. Ripple rejection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 8. Fixed output regulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Figure 9. Current regulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Figure 10. Circuit for increasing output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Figure 11. Adjustable output regulator (7 to 30 V). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Figure 12. 0.5 to 10 V regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Figure 13. High current voltage regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Figure 14. High output current with short circuit protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Figure 15. Tracking voltage regulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Figure 16. Split power supply (± 15 V - 1 A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Figure 17. Negative output voltage circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Figure 18. Switching regulator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Figure 19. High input voltage circuit (configuration 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Figure 20. High input voltage circuit (configuration 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Figure 21. High input and output voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Figure 22. Reducing power dissipation with dropping resistor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Figure 23. Remote shutdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Figure 24. Power AM modulator (unity voltage gain, I
O
£ 0.5). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Figure 25. Adjustable output voltage with temperature compensation . . . . . . . . . . . . . . . . . . . . . . . . 33
Figure 26. Light controllers (V
O(min)
= V
XX
+ V
BE
). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Figure 27. Protection against input short-circuit with high capacitance loads . . . . . . . . . . . . . . . . . . . 34
Figure 28. Dropout voltage vs. junction temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Figure 29. Peak output current vs. input/output differential voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Figure 30. Supply voltage rejection vs. frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Figure 31. Output voltage vs. junction temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Figure 32. Output impedance vs. frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure 33. Quiescent current vs. junction temp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure 34. Load transient response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure 35. Line transient response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure 36. Quiescent current vs. input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Figure 37. TO-220 (dual gauge) drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Figure 38. TO-220 SG (single gauge) drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Figure 39. TO-220FP drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Figure 40. DPAK drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Figure 41. DPAK footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Figure 42. D²PAK (SMD 2L STD-ST) type A drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Figure 43. D²PAK (SMD 2L Wooseok-subcon.) drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Figure 44. D²PAK (SMD 2L Wooseok-subcon.) footprint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Figure 45. Tube for TO-220 (dual gauge) (mm.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Figure 46. Tube for TO-220 (single gauge) (mm.). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Figure 47. Tap e for DPA K and D
2
PAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Figure 48. Reel for DPAK and D
2
PAK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
DocID2143 Rev 32 5/58
Positive voltage regulator ICs Diagram
58
1 Diagram
Figure 1. Block diagram
Pin configuration Positive voltage regulator ICs
6/58 DocI D2143 Rev 32
2 Pin configuration
Figure 2. Pin connections (top view)
72)3
72
'ð3$. '3$.
Figure 3. Schematic diag ram
DocID2143 Rev 32 7/58
Positive voltage regulator ICs Maximum ratings
58
3 Maximum ratings
Note: Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these condition is not implied.
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
V
I
DC input voltage for V
O
= 5 to 18 V 35 V
for V
O
= 20, 24 V 40
I
O
Output current Internally limited
P
D
Power dissipation Internally limited
T
STG
Storage temperature range -65 to 150 °C
T
OP
Operating junction temperature range for L78xxC, L78xxAC 0 to 125 °C
for L78xxAB -40 to 125
Table 2. Thermal data
Symbol Parameter D²PAK DPAK TO-220 TO-220FP Unit
R
thJC
Thermal resistance junction-case 3 8 5 5 °C/W
R
thJA
Thermal resistance junction-ambient 62.5 100 50 60 °C/W
Figure 4. Application circuits
Test circuits Positive voltage regulator ICs
8/58 DocI D2143 Rev 32
4 Test circuits
Figure 5. DC parameter
Figure 6. Load regulation
Figure 7. Ripple rejection
DocID2143 Rev 32 9/58
Positive voltage regulator ICs Electrical characteristics
58
5 Electrical characteristics
V
I
= 10 V, I
O
= 1 A, T
J
= 0 to 125 °C (L7805AC), T
J
= -40 to 125 °C (L7805AB), unl ess
otherwise specified
(a)
.
a. Minimum load current for regulation is 5 mA.
Table 3. Electrical characteristics of L7805A
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 4.9 5 5.1 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 7.5 to 18 V 4.8 5 5.2 V
V
O
Output voltage I
O
= 1 A, V
I
= 18 to 20 V, T
J
= 25°C 4 .8 5 5.2 V
ΔV
O (1)
Line regulation
V
I
= 7.5 to 25 V, I
O
= 500 mA, T
J
= 25°C 7 50 mV
V
I
= 8 to 12 V 10 50 mV
V
I
= 8 to 12 V, T
J
= 25°C 2 25 mV
V
I
= 7.3 to 20 V, T
J
= 25°C 7 50 mV
ΔV
O (1)
Load regulation
I
O
= 5 mA t o 1 A 25 100
mVI
O
= 5 mA to 1.5 A, T
J
= 25°C 30 100
I
O
= 250 to 750 mA 8 50
I
q
Quiescent current T
J
= 25°C 4.3 6 mA
6mA
ΔI
q
Quiescent current change
V
I
= 8 to 23 V, I
O
= 500 mA 0.8 mA
V
I
= 7.5 to 20 V, T
J
= 25°C 0.8 mA
I
O
= 5 mA to 1 A 0 .5 mA
SVR Supply voltage rejection V
I
= 8 to 18 V, f = 120 Hz, I
O
= 500 mA 68 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
eN Output noise voltage T
A
= 25°C, B =10 Hz to 100 kHz 10 µV/V
O
R
O
Output resistance f = 1 kHz 17 mΩ
I
sc
Short circuit current V
I
= 35 V, T
A
= 25°C 0.2 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
ΔV
O
/ΔT Output voltage drift -1.1 mV/°C
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
Electrical characteristics Positive voltage regulator ICs
10/58 DocID2143 Rev 32
V
I
= 11 V, I
O
= 1 A, T
J
= 0 to 125 °C (L7806AC), T
J
= -40 to 125 °C (L7806AB), unless
otherwise specified
(b)
.
b. Minimum load current for regulation is 5 mA.
Table 4. Electrical characteristics of L7806A
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 5.88 6 6.12 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 8.6 to 19 V 5.76 6 6.24 V
V
O
Output voltage I
O
= 1 A, V
I
= 19 to 21 V, T
J
= 25°C 5.76 6 6.24 V
ΔV
O (1)
Line regulation
V
I
= 8.6 to 25 V, I
O
= 500 mA, T
J
= 25°C 9 60 mV
V
I
= 9 to 13 V 11 60 mV
V
I
= 9 to 13 V, T
J
= 25°C 3 30 mV
V
I
= 8.3 to 21 V, T
J
= 25°C 9 60 mV
ΔV
O (1)
Load regulation
I
O
= 5 mA t o 1 A 25 100
mVI
O
= 5 mA to 1.5 A, T
J
= 25°C 30 100
I
O
= 250 to 750 mA 10 50
I
q
Quiescent current T
J
= 25°C 4.3 6 mA
6mA
ΔI
q
Quiescent current change
V
I
= 9 to 24 V, I
O
= 500 mA 0.8 mA
V
I
= 8.6 to 21 V, T
J
= 25°C 0.8 mA
I
O
= 5 mA to 1 A 0 .5 mA
SVR Supply voltage rejection V
I
= 9 to 19 V, f = 120 Hz, I
O
= 500 mA 65 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
eN Output noise voltage T
A
= 25°C, B =10 Hz to 100 kHz 10 µV/V
O
R
O
Output resistance f = 1 kHz 17 mΩ
I
sc
Short circuit current V
I
= 35 V, T
A
= 25°C 0.2 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
ΔV
O
/ΔT Output voltage drift -0.8 mV/°C
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
DocID2143 Rev 32 11/58
Positive voltage regulator ICs Electrical characteristics
58
V
I
= 14 V, I
O
= 1 A, T
J
= 0 to 125 °C (L7808AC), T
J
= -40 to 125 °C (L7808AB), unl ess
otherwise specified
(c)
.
c. Minimum load current for regulation is 5 mA.
Table 5. Electrical characteristics of L7808A
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 7.84 8 8.16 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 10.6 to 21 V 7.7 8 8.3 V
V
O
Output voltage I
O
= 1 A, V
I
= 21 to 23 V, T
J
= 25°C 7 .7 8 8.3 V
ΔV
O (1)
Line regulation
V
I
= 10.6 to 25 V, I
O
= 500 mA,
T
J
= 25°C 12 80 mV
V
I
= 11 to 17 V 15 80 mV
V
I
= 11 to 17 V, T
J
= 25°C 5 40 mV
V
I
= 10.4 to 23 V, T
J
= 25°C 12 80 mV
ΔV
O (1)
Load regulation
I
O
= 5 mA t o 1 A 25 100
mVI
O
= 5 mA to 1.5 A, T
J
= 25°C 30 100
I
O
= 250 to 750 mA 10 50
I
q
Quiescent current T
J
= 25°C 4.3 6 mA
6mA
ΔI
q
Quiescent current change
V
I
= 11 to 23 V, I
O
= 500 mA 0.8 mA
V
I
= 10.6 to 23 V, T
J
= 25°C 0.8 mA
I
O
= 5 mA to 1 A 0 .5 mA
SVR Supply voltage rejection V
I
= 11.5 to 21.5 V, f = 120 Hz,
I
O
= 500 mA 62 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
eN Output noise voltage T
A
= 25°C, B =10 Hz to 100 kHz 10 µV/V
O
R
O
Output resistance f = 1 kHz 18 mΩ
I
sc
Short circuit current V
I
= 35 V, T
A
= 25°C 0.2 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
ΔV
O
/ΔT Output voltage drift -0.8 mV/°C
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
Electrical characteristics Positive voltage regulator ICs
12/58 DocID2143 Rev 32
V
I
= 15 V, I
O
= 1 A, T
J
= 0 to 125 °C (L7809AC), T
J
= -40 to 125 °C (L7809AB), unl ess
otherwise specified
(d)
.
d. Minimum load current for regulation is 5 mA.
Table 6. Electrical characteristics of L7809A
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 8.82 9 9.18 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 10.6 to 22 V 8.65 9 9.35 V
V
O
Output voltage I
O
= 1 A, V
I
= 22 to 24 V, T
J
= 25°C 8.65 9 9.35 V
ΔV
O (1)
Line regulation
V
I
= 10.6 to 25 V, I
O
= 500 mA,
T
J
= 25°C 12 90 mV
V
I
= 11 to 17 V 15 90 mV
V
I
= 11 to 17 V, T
J
= 25°C 5 45 mV
V
I
= 11.4 to 23 V, T
J
= 25°C 12 90 mV
ΔV
O (1)
Load regulation
I
O
= 5 mA t o 1 A 25 100
mVI
O
= 5 mA to 1.5 A, T
J
= 25°C 30 100
I
O
= 250 to 750 mA 10 50
I
q
Quiescent current T
J
= 25°C 4.3 6 mA
6mA
ΔI
q
Quiescent current change
V
I
= 11 to 25 V, I
O
= 500 mA 0.8 mA
V
I
= 10.6 to 23 V, T
J
= 25°C 0.8 mA
I
O
= 5 mA to 1 A 0 .5 mA
SVR Supply voltage rejection V
I
= 11.5 to 21.5 V, f = 120 Hz,
I
O
= 500 mA 61 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
eN Output noise voltage T
A
= 25°C, B =10 Hz to 100 kHz 10 µV/V
O
R
O
Output resistance f = 1 kHz 18 mΩ
I
sc
Short circuit current V
I
= 35 V, T
A
= 25°C 0.2 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
ΔV
O
/ΔT Output voltage drift -0.8 mV/°C
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
DocID2143 Rev 32 13/58
Positive voltage regulator ICs Electrical characteristics
58
V
I
= 19 V, I
O
= 1 A, T
J
= 0 to 125 °C (L7812AC), T
J
= -40 to 125 °C (L7812AB), unl ess
otherwise specified
(e)
.
e. Minimum load current for regulation is 5 mA.
Table 7. Electrical characteristics of L7812A
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 11.75 12 12.25 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 14.8 to 25 V 11.5 12 12.5 V
V
O
Output voltage I
O
= 1 A, V
I
= 25 to 27 V, T
J
= 25°C 11.5 12 12.5 V
ΔV
O (1)
Line regulation
V
I
= 14.8 to 30 V, I
O
= 500 mA,
T
J
= 25°C 13 120 mV
V
I
= 16 to 12 V 16 120 mV
V
I
= 16 to 12 V, T
J
= 25°C 6 60 mV
V
I
= 14.5 to 27 V, T
J
= 25°C 13 120 mV
ΔV
O (1)
Load regulation
I
O
= 5 mA t o 1 A 25 100
mVI
O
= 5 mA to 1.5 A, T
J
= 25°C 30 100
I
O
= 250 to 750 mA 10 50
I
q
Quiescent current T
J
= 25°C 4.4 6 mA
6mA
ΔI
q
Quiescent current change
V
I
= 15 to 30 V, I
O
= 500 mA 0.8 mA
V
I
= 14.8 to 27 V, T
J
= 25°C 0.8 mA
I
O
= 5 mA to 1 A 0 .5 mA
SVR Supply voltage rejection V
I
= 15 to 25 V, f = 120 Hz, I
O
= 500 mA 60 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
eN Output noise voltage T
A
= 25°C, B = 10 Hz to 100 kHz 10 µV/V
O
R
O
Output resistance f = 1 kHz 18 mΩ
I
sc
Short circuit current V
I
= 35 V, T
A
= 25°C 0.2 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
ΔV
O
/ΔT Output voltage drift -1 m V/°C
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
Electrical characteristics Positive voltage regulator ICs
14/58 DocID2143 Rev 32
V
I
= 23 V, I
O
= 1 A, T
J
= 0 to 125 °C (L7815AC), T
J
= -40 to 125 °C (L7815AB), unl ess
otherwise specified
(f)
.
f. Minimum load current for regulation is 5 mA.
Table 8. Electrical characteristics of L7815A
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 14.7 15 15.3 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 17.9 to 28 V 14.4 15 15.6 V
V
O
Output voltage I
O
= 1 A, V
I
= 28 to 30 V, T
J
= 25°C 14.4 15 15.6 V
ΔV
O (1)
Line regulation
V
I
= 17.9 to 30 V, I
O
= 500 mA,
T
J
= 25°C 13 150 mV
V
I
= 20 to 26 V 16 150 mV
V
I
= 20 to 26 V, T
J
= 25°C 6 75 mV
V
I
= 17.5 to 30 V, T
J
= 25°C 13 150 mV
ΔV
O (1)
Load regulation
I
O
= 5 mA t o 1 A 25 100
mVI
O
= 5 mA to 1.5 A, T
J
= 25°C 30 100
I
O
= 250 to 750 mA 10 50
I
q
Quiescent current T
J
= 25°C 4.4 6 mA
6mA
ΔI
q
Quiescent current change
V
I
= 17.5 to 30 V, I
O
= 500 mA 0.8 mA
V
I
= 17.5 to 30 V, T
J
= 25°C 0.8 mA
I
O
= 5 mA to 1 A 0 .5 mA
SVR Supply voltage rejection V
I
= 18.5 to 28.5 V, f = 120 Hz,
I
O
= 500 mA 58 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
eN Output noise voltage T
A
= 25°C, B = 10Hz to 100 kHz 10 µV/V
O
R
O
Output resistance f = 1 kHz 19 mΩ
I
sc
Short circuit current V
I
= 35 V, T
A
= 25°C 0.2 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
ΔV
O
/ΔT Output voltage drift -1 m V/°C
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
DocID2143 Rev 32 15/58
Positive voltage regulator ICs Electrical characteristics
58
V
I
= 33 V, I
O
= 1 A, T
J
= 0 to 125 °C (L7824AC), T
J
= -40 to 125 °C (L7824AB), unl ess
otherwise specified
(g)
.
g. Minimum load current for regulation is 5 mA.
Table 9. Electrical characteristics of L7824A
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 23.5 24 24.5 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 27.3 to 37 V 23 24 25 V
V
O
Output voltage I
O
= 1 A, V
I
= 37 to 38 V, T
J
= 25°C 23 24 25 V
ΔV
O (1)
Line regulation
V
I
= 27 to 38 V, I
O
= 500 mA, T
J
= 25°C 31 240 mV
V
I
= 30 to 36 V 35 200 mV
V
I
= 30 to 36 V, T
J
= 25°C 14 120 mV
V
I
= 26.7 to 38 V, T
J
= 25°C 31 240 mV
ΔV
O (1)
Load regulation
I
O
= 5 mA t o 1 A 25 100
mVI
O
= 5 mA to 1.5 A, T
J
= 25°C 30 100
I
O
= 250 to 750 mA 10 50
I
q
Quiescent current T
J
= 25°C 4.6 6 mA
6mA
ΔI
q
Quiescent current change
V
I
= 27.3 to 38 V, I
O
= 500 mA 0.8 mA
V
I
= 27.3 to 38 V, T
J
= 25°C 0.8 mA
I
O
= 5 mA to 1 A 0 .5 mA
SVR Supply voltage rejection V
I
= 28 to 38 V, f = 120 Hz, I
O
= 500 mA 54 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
eN Output noise voltage T
A
= 25°C, B = 10 Hz to 100 kHz 10 µV/V
O
R
O
Output resistance f = 1 kHz 20 mΩ
I
sc
Short circuit current V
I
= 35 V, T
A
= 25°C 0.2 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
ΔV
O
/ΔT Output voltage drift -1.5 mV/°C
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
Electrical characteristics Positive voltage regulator ICs
16/58 DocID2143 Rev 32
Refer to the test circuits, T
J
= 0 to 125 °C, V
I
= 10 V, I
O
= 500 mA, C
I
= 0. 33 µF, C
O
= 0.1 µF
unless otherwise specified
(h)
.
h. Minimum load current for regulation is 5 mA.
Table 10. Electrical characteristics of L7805C
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 4.8 5 5.2 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 7 to 18 V 4.75 5 5.25 V
V
O
Output voltage I
O
= 1 A, V
I
= 18 to 20V, T
J
= 25°C 4.75 5 5.25 V
ΔV
O(1)
Line regulation V
I
= 7 to 25 V, T
J
= 25°C 3 100 mV
V
I
= 8 to 12 V, T
J
= 25°C 1 50
ΔV
O(1)
Load regulation I
O
= 5 mA to 1.5 A, T
J
= 25°C 100 mV
I
O
= 250 to 750 mA, T
J
= 25°C 50
I
d
Quiescent current T
J
= 25°C 8 mA
ΔI
d
Quiescent current change I
O
= 5 mA to 1 A 0 .5 mA
V
I
= 7 to 23 V 0.8
ΔV
O
/ΔT Output voltage drift I
O
= 5 mA -1.1 mV/°C
eN Output noise voltage B = 10 Hz to 100 kHz, T
J
= 25°C 40 µV/V
O
SVR Supply voltage rejection V
I
= 8 to 18 V, f = 120 Hz 62 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
R
O
Output resistance f = 1 kHz 17 mΩ
I
sc
Short circuit current V
I
= 35 V, T
J
= 25°C 0.75 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
DocID2143 Rev 32 17/58
Positive voltage regulator ICs Electrical characteristics
58
Refer to the test circuits, T
J
= 0 to 125 °C, V
I
= 11 V, I
O
= 500 mA, C
I
= 0. 3 3 µF, C
O
= 0.1 µF
unless otherwise specified
(i)
.
i. Minimum load current for regulation is 5 mA.
Table 11. Electrical characteristics of L7806C
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 5.75 6 6.25 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 8 to 19 V 5.7 6 6.3 V
V
O
Output voltage I
O
= 1 A, V
I
= 19 to 21 V, T
J
= 25°C 5.7 6 6.3 V
ΔV
O(1)
Line regulation V
I
= 8 to 25 V, T
J
= 25°C 120 mV
V
I
= 9 to 13 V, T
J
= 25°C 60
ΔV
O(1)
Load regulation I
O
= 5 mA to 1.5 A, T
J
= 25°C 120 mV
I
O
= 250 to 750 mA, T
J
= 25°C 60
I
d
Quiescent current T
J
= 25°C 8 mA
ΔI
d
Quiescent current change I
O
= 5 mA to 1 A 0 .5 mA
V
I
= 8 to 24 V 1.3
ΔV
O
/ΔT Output voltage drift I
O
= 5 mA -0.8 mV/°C
eN Output noise voltage B = 10 Hz to 100 kHz, T
J
= 25°C 45 µV/V
O
SVR Supply voltage rejection V
I
= 9 to 19 V, f = 120 Hz 59 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
R
O
Output resistance f = 1 kHz 19 mΩ
I
sc
Short circuit current V
I
= 35 V, T
J
= 25°C 0.55 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
Electrical characteristics Positive voltage regulator ICs
18/58 DocID2143 Rev 32
Refer to the test circuits, T
J
= 0 to 125 °C, V
I
= 14 V, I
O
= 500 mA, C
I
= 0. 33 µF, C
O
= 0.1 µF
unless otherwise specified
(j)
.
j. Minimum load current for regulation is 5 mA.
Table 12. Electrical characteristics of L7808C
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 7.7 8 8.3 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 10.5 to 21 V 7.6 8 8.4 V
V
O
Output voltage I
O
= 1 A, V
I
= 21 to 25 V, T
J
= 25°C 7.6 8 8.4 V
ΔV
O(1)
Line regulation V
I
= 10.5 to 25 V, T
J
= 25°C 160 mV
V
I
= 11 to 17 V, T
J
= 25°C 80
ΔV
O(1)
Load regulation I
O
= 5 mA to 1.5 A, T
J
= 25°C 160 mV
I
O
= 250 to 750 mA, T
J
= 25°C 80
I
d
Quiescent current T
J
= 25°C 8 mA
ΔI
d
Quiescent current change I
O
= 5 mA to 1 A 0 .5 mA
V
I
= 10.5 to 25 V 1
ΔV
O
/ΔT Output voltage drift I
O
= 5 mA -0.8 mV/°C
eN Output noise voltage B = 10 Hz to 100 kHz, T
J
= 25°C 52 µV/V
O
SVR Supply voltage rejection V
I
= 11.5 to 21.5 V, f = 120 Hz 56 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
R
O
Output resistance f = 1 kHz 16 mΩ
I
sc
Short circuit current V
I
= 35 V, T
J
= 25°C 0.45 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
DocID2143 Rev 32 19/58
Positive voltage regulator ICs Electrical characteristics
58
Refer to the test circuits, T
J
= 0 to 125 °C, V
I
= 14.5 V, I
O
= 500 mA, C
I
= 0.33 µF,
C
O
= 0.1 µF unless otherwise specified
(k)
.
k. Minimum load current for regulation is 5 mA.
Table 13. Electrical characteristics of L7885C
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 8.2 8.5 8.8 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 11 to 21.5 V 8.1 8.5 8.9 V
V
O
Output voltage I
O
= 1 A, V
I
= 21.5 to 26 V, T
J
= 25°C 8.1 8.5 8.9 V
ΔV
O(1)
Line regulation V
I
= 11 to 27 V, T
J
= 25°C 160 mV
V
I
= 11.5 to 17.5 V, T
J
= 25°C 80
ΔV
O(1)
Load regulation I
O
= 5 mA to 1.5 A, T
J
= 25°C 160 mV
I
O
= 250 to 750 mA, T
J
= 25°C 80
I
d
Quiescent current T
J
= 25°C 8 mA
ΔI
d
Quiescent current change I
O
= 5 mA to 1 A 0 .5 mA
V
I
= 11 to 26 V 1
ΔV
O
/ΔT Output voltage drift I
O
= 5 mA -0.8 mV/°C
eN Output noise voltage B = 10 Hz to 100 kHz, T
J
= 25°C 55 µV/V
O
SVR Supply voltage rejection V
I
= 12 to 22 V, f = 120 Hz 56 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
R
O
Output resistance f = 1 kHz 16 mΩ
I
sc
Short circuit current V
I
= 35 V, T
J
= 25°C 0.45 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
Electrical characteristics Positive voltage regulator ICs
20/58 DocID2143 Rev 32
Refer to the test circuits, T
J
= 0 to 125 °C, V
I
= 15 V, I
O
= 500 mA, C
I
= 0. 33 µF, C
O
= 0.1 µF
unless otherwise specified
(l)
.
l. Minimum load current for regulation is 5 mA.
Table 14. Electrical characteristics of L7809C
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 8.64 9 9.36 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 11.5 to 22 V 8.55 9 9.45 V
V
O
Output voltage I
O
= 1 A, V
I
= 22 to 26 V, T
J
= 25°C 8.55 9 9.45 V
ΔV
O(1)
Line regulation V
I
= 11.5 to 26 V, T
J
= 25°C 18 0 mV
V
I
= 12 to 18 V, T
J
= 25°C 90
ΔV
O(1)
Load regulation I
O
= 5 mA to 1.5 A, T
J
= 25°C 180 mV
I
O
= 250 to 750 mA, T
J
= 25°C 90
I
d
Quiescent current T
J
= 25°C 8 mA
ΔI
d
Quiescent current change I
O
= 5 mA to 1 A 0 .5 mA
V
I
= 11.5 to 26 V 1
ΔV
O
/ΔT Output voltage drift I
O
= 5 mA -1 mV/°C
eN Output noise voltage B = 10 Hz to 100 kHz, T
J
= 25°C 70 µV/V
O
SVR Supply voltage rejection V
I
= 12 to 23 V, f = 120 Hz 55 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
R
O
Output resistance f = 1 kHz 17 mΩ
I
sc
Short circuit current V
I
= 35 V, T
J
= 25°C 0.40 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
DocID2143 Rev 32 21/58
Positive voltage regulator ICs Electrical characteristics
58
Refer to the test circuits, T
J
= 0 to 125 °C, V
I
= 19 V, I
O
= 500 mA, C
I
= 0. 33 µF, C
O
= 0.1 µF
unless otherwise specified
(m)
.
m. Minimum load current for regulation is 5 mA.
Table 15. Electrical characteristics of L7812C
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 11.5 12 12.5 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 14.5 to 25 V 11.4 12 12.6 V
V
O
Output voltage I
O
= 1 A, V
I
= 25 to 27 V, T
J
= 25°C 11.4 12 12.6 V
ΔV
O(1)
Line regulation V
I
= 14.5 to 30 V, T
J
= 25°C 240 mV
V
I
= 16 to 22 V, T
J
= 25°C 120
ΔV
O(1)
Load regulation I
O
= 5 mA to 1.5 A, T
J
= 25°C 240 mV
I
O
= 250 to 750 mA, T
J
= 25°C 120
I
d
Quiescent current T
J
= 25°C 8 mA
ΔI
d
Quiescent current change I
O
= 5 mA to 1 A 0 .5 mA
V
I
= 14.5 to 30 V 1
ΔV
O
/ΔT Output voltage drift I
O
= 5 mA -1 mV/°C
eN Output noise voltage B = 10 Hz to 100 kHz, T
J
= 25°C 75 µV/V
O
SVR Supply voltage rejection V
I
= 15 to 25 V, f = 120 Hz 55 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
R
O
Output resistance f = 1 kHz 18 mΩ
I
sc
Short circuit current V
I
= 35 V, T
J
= 25°C 0.35 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
Electrical characteristics Positive voltage regulator ICs
22/58 DocID2143 Rev 32
Refer to the test circuits, T
J
= 0 to 125 °C, V
I
= 23 V, I
O
= 500 mA, C
I
= 0. 33 µF, C
O
= 0.1 µF
unless otherwise specified
(n)
.
n. Minimum load current for regulation is 5 mA.
Table 16. Electrical characteristics of L7815C
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 14.4 15 15.6 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 17.5 to 28 V 14.25 15 15.75 V
V
O
Output voltage I
O
= 1 A, V
I
= 28 to 30 V, T
J
= 25°C 14.25 15 15.75 V
ΔV
O(1)
Line regulation V
I
= 17.5 to 30 V, T
J
= 25°C 300 mV
V
I
= 20 to 26 V, T
J
= 25°C 150
ΔV
O(1)
Load regulation I
O
= 5 mA to 1.5 A, T
J
= 25°C 300 mV
I
O
= 250 to 750 mA, T
J
= 25°C 150
I
d
Quiescent current T
J
= 25°C 8 mA
ΔI
d
Quiescent current change I
O
= 5 mA to 1A 0.5 mA
V
I
= 17.5 to 30 V 1
ΔV
O
/ΔT Output voltage drift I
O
= 5 mA -1 mV/°C
eN Output noise voltage B = 10 Hz to 100kHz, T
J
= 25°C 90 µV/V
O
SVR Supply voltage rejection V
I
= 18.5 to 28.5 V, f = 120 Hz 54 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
R
O
Output resistance f = 1 kHz 19 mΩ
I
sc
Short circuit current V
I
= 35 V, T
J
= 25°C 0.23 A
I
scp
Short circuit peak current T
J
= 25°C 2.2 A
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
DocID2143 Rev 32 23/58
Positive voltage regulator ICs Electrical characteristics
58
Refer to the test circuits, T
J
= 0 to 125 °C, V
I
= 26 V, I
O
= 500 mA, C
I
= 0. 33 µF, C
O
= 0.1 µF
unless otherwise specified
(o)
.
o. Minimum load current for regulation is 5 mA.
Table 17. Electrical characteristics of L7818C
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 17.3 18 18.7 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 21 to 31 V 17.1 18 18.9 V
V
O
Output voltage I
O
= 1 A, V
I
= 31 to 33 V, T
J
= 25°C 17.1 18 18.9 V
ΔV
O(1)
Line regulation V
I
= 21 to 33 V, T
J
= 25°C 360 mV
V
I
= 24 to 30 V, T
J
= 25°C 180
ΔV
O(1)
Load regulation I
O
= 5 mA to 1.5 A, T
J
= 25°C 360 mV
I
O
= 250 to 750 mA, T
J
= 25°C 180
I
d
Quiescent current T
J
= 25°C 8 mA
ΔI
d
Quiescent current change I
O
= 5 mA to 1 A 0 .5 mA
V
I
= 21 to 33 V 1
ΔV
O
/ΔT Output voltage drift I
O
= 5 mA -1 mV/°C
eN Output noise voltage B = 10 Hz to 100 kHz, T
J
= 25°C 110 µV/V
O
SVR Supply voltage rejection V
I
= 22 to 32 V, f = 120 Hz 53 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
R
O
Output resistance f = 1 kHz 22 mΩ
I
sc
Short circuit current V
I
= 35 V, T
J
= 25°C 0.20 A
I
scp
Short circuit peak current T
J
= 25°C 2.1 A
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
Electrical characteristics Positive voltage regulator ICs
24/58 DocID2143 Rev 32
Refer to the test circuits, T
J
= 0 to 125 °C, V
I
= 33 V, I
O
= 500 mA, C
I
= 0. 33 µF, C
O
= 0.1 µF
unless otherwise specified
(p)
.
p. Minimum load current for regulation is 5 mA.
Table 18. Electrical characteristics of L7824C
Symbol Parameter Test conditions Min. Typ. Max. Unit
V
O
Output voltage T
J
= 25°C 23 24 25 V
V
O
Output voltage I
O
= 5 mA to 1 A, V
I
= 27 to 37 V 22.8 24 25.2 V
V
O
Output voltage I
O
= 1 A, V
I
= 37 to 38 V, T
J
= 25°C 22.8 24 25.2 V
ΔV
O(1)
Line regulation V
I
= 27 to 38 V, T
J
= 25°C 480 mV
V
I
= 30 to 36 V, T
J
= 25°C 240
ΔV
O(1)
Load regulation I
O
= 5 mA to 1.5 A, T
J
= 25°C 480 mV
I
O
= 250 to 750 mA, T
J
= 25°C 240
I
d
Quiescent current T
J
= 25°C 8 mA
ΔI
d
Quiescent current change I
O
= 5 mA to 1 A 0 .5 mA
V
I
= 27 to 38 V 1
ΔV
O
/ΔT Output voltage drift I
O
= 5 mA -1.5 mV/°C
eN Output noise voltage B = 10 Hz to 100 kHz, T
J
= 25°C 170 µV/V
O
SVR Supply voltage rejection V
I
= 28 to 38 V, f = 120 Hz 50 dB
V
d
Dropout voltage I
O
= 1 A, T
J
= 25°C 2 V
R
O
Output resistance f = 1 kHz 28 mΩ
I
sc
Short circuit current V
I
= 35 V, T
J
= 25°C 0.15 A
I
scp
Short circuit peak current T
J
= 25°C 2.1 A
1. Load and line regulation are specified at const ant junction temperature. Changes in V
O
due to heating effects must be
taken into account separately. Pulse testing with low duty cycle is used.
DocID2143 Rev 32 25/58
Positive voltage regulator ICs Application information
58
6 Application information
6.1 Design consideration
The L78 Series of fixed voltage regulators are designed with thermal overload protection
that shuts down the circuit when subjected to an excessive power overload condition,
internal short-circuit protection that limits the maximum current the circuit will pass, and
output transistor safe-area compensation that reduces the output short-circuit current as the
voltage across the pass transistor is increased. In many low current applications,
compensation capacitors are not required. However, it is recommended that the regulator
input be bypassed with capacitor if the regulator is connected to the power supply filter with
long lengths, or if the output load capacitance is large. An input bypass capacitor should be
selected to provide good high frequency characteristics to insure stable operation under all
load conditions. A 0.33 µF or larger tantalum, mylar or other capacitor having low internal
impedance at high frequencies should be chosen. The bypass capacitor should be mounted
with the shortest possible leads directly across the regulators input terminals. Normally good
construction techniques should be used to minimize ground loops and lead resistance drops
since the regulator has no external sense lead.
The addition of an operational amplifier allows adjustment to higher or intermediate values
while retaining regulation characteristics. The minimum voltage obtained with the
arrangement is 2 V greater than the regulator voltage.
The circuit of Figure 13 can be modified to provide supply protection against short circuit by
adding a short circuit sense resistor, RSC, and an additional PNP transistor. The current
sensing PNP must be able to handle the short circuit current of the three terminal regulator
Therefore a four ampere plastic power transistor is specified.
Figure 8. Fixed output regulator
1. Although no output capacitor is need for stability, it does improve transient response.
2. Required if regulator is located an appreciable distance from power supply filter.
Application information Positive voltage regulator ICs
26/58 DocID2143 Rev 32
Figure 9. Current regulator
,29;;;;5,G
Figure 10. Circuit for increasing output voltage
,5 ,G
929;;;;555,G5
Ż
DocID2143 Rev 32 27/58
Positive voltage regulator ICs Application information
58
Figure 11. Adjustable output regulator (7 to 30 V)
Figure 12. 0.5 to 10 V regulator
V
O
=V
XX
R
4
/R
1
Application information Positive voltage regulator ICs
28/58 DocID2143 Rev 32
Figure 13. High current voltage regulator
5
,2 ,5(*4,5(*B
9
BBBB
%(4
B
9%(4
5 BBBBBBBBBBBBBB
,5(4,4E4
Figure 14. High output current with short circuit protection
56&6& 9%(%(44,6&6&
DocID2143 Rev 32 29/58
Positive voltage regulator ICs Application information
58
* Against potential latch-up problems.
Figure 15. Tracking voltage regulator
Figure 16. Split power supply (± 15 V - 1 A)
Application information Positive voltage regulator ICs
30/58 DocID2143 Rev 32
Figure 17. Negative output voltage circuit
Figure 18. Switching regulator
Figure 19. High input voltage circuit (configuration 1)
9,1 9,99=9%(%(
DocID2143 Rev 32 31/58
Positive voltage regulator ICs Application information
58
Figure 20. High input voltage circuit (configuration 2)
Figure 21. High input and output voltage
92 9;;;;9=
Figure 22. Reducing power dissipation with dropping resistor
9999 9
5 BB,PL,PL
BBBBB
QQ
BBBBBBB
;;;;
BBBBB
'52
BBBBBBB
3PD[PD[
BBBBBB
,2PD[[,GPD[PD[
Application information Positive voltage regulator ICs
32/58 DocID2143 Rev 32
Note: The circuit performs well up to 100 kHz.
Figure 23. Remote shutdown
Figure 24. Power AM modulator (unity voltage gain, I
O
0.5)
DocID2143 Rev 32 33/58
Positive voltage regulator ICs Application information
58
Note: Q
2
is connected as a diode in order to compensate the variation of the Q
1
V
BE
with the
temperature. C allows a slow rise time of the V
O
.
Figure 25. Adjustable output voltage with temperature compensation
92 9;;559%(
Figure 26. Light controllers (V
O(min)
= V
XX
+ V
BE
)
92ULVHVZKHQWKHOLJKWJRHVXS
92IDOOVZKHQWKHOLJKWJRHVXS
Application information Positive voltage regulator ICs
34/58 DocID2143 Rev 32
Note: Application with high capacitance loads and an output voltage greater than 6 volts need an
external diode (see Figure 22 on page 31) to protect the device against input short circuit. In
this case the input voltage falls rapidly while the output voltage decrease slowly. The
capacitance discharges by means of the base-emitter junction of the series pass transistor
in the regulator. If the energy is sufficiently high, the transistor may be destroyed. The
external diode by-passes the current from the IC to ground.
Figure 27. Protection against input short-cir cuit with high capacitance loads
DocID2143 Rev 32 35/58
Positive voltage regulator ICs Typical performance
58
7 Typical performance
Figure 28. Dropout voltage vs. junction
temperature Figure 29. Peak output current vs. input/output
differential voltage
Figure 30. Supply voltage rejection vs.
frequency Figure 31. Output voltage vs. junction
temperature
Typical performanc e Positive voltage regulator ICs
36/58 DocID2143 Rev 32
Figure 32. Output impedance vs. frequency Figure 33. Quiescent current vs. junction temp.
Figure 34. Load transient response Figure 35. Line transient response
Figure 36. Quiescent current vs. input voltage
DocID2143 Rev 32 37/58
Positive voltage regulator ICs Package mechanical data
58
8 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK
®
is an ST trademark.
Package mechanical data Positive voltage regulator ICs
38/58 DocID2143 Rev 32
Figure 37. TO-220 (dual gauge) drawing
BW\SH$B5HYB7
DocID2143 Rev 32 39/58
Positive voltage regulator ICs Package mechanical data
58
Table 19. TO-220 (dual gauge) mechanical data
Dim. mm
Min. Typ. Max.
A4.40 4.60
b0.61 0.88
b1 1.14 1.70
c0.48 0.70
D 15.25 15.75
D1 1.27
E 10 10.40
e2.40 2.70
e1 4.95 5.15
F1.23 1.32
H1 6.20 6.60
J1 2.40 2.72
L13 14
L1 3.50 3.93
L20 16.40
L30 28.90
P3.75 3.85
Q2.65 2.95
Package mechanical data Positive voltage regulator ICs
40/58 DocID2143 Rev 32
Figure 38. TO-220 SG (single gauge) drawing
BUHY'
DocID2143 Rev 32 41/58
Positive voltage regulator ICs Package mechanical data
58
Table 20. TO-220 SG (single gauge) mechanical data
Dim. mm
Min. Typ. Max.
A 4.40 4.60
b 0.61 0.88
b1 1.14 1.70
c 0.48 0.70
D 15.25 15.75
E 10 10.40
e 2.40 2.70
e1 4.95 5.15
F 0.51 0.60
H1 6.20 6.60
J1 2.40 2.72
L13 14
L1 3.50 3.93
L20 16.40
L30 28.90
P 3.75 3.85
Q 2.65 2.95
Package mechanical data Positive voltage regulator ICs
42/58 DocID2143 Rev 32
Figure 39. TO-220FP dra wing
7012510A-H
DocID2143 Rev 32 43/58
Positive voltage regulator ICs Package mechanical data
58
Table 21. TO-220FP mechanical data
Dim. mm.
Min. Typ. Max.
A4.40 4.60
B2.5 2.7
D 2.5 2.75
E0.45 0.70
F0.75 1
F1 1.15 1.50
F2 1.15 1.50
G 4.95 5.2
G1 2.4 2.7
H 10.0 10.40
L2 16
L3 28.6 30.6
L4 9.8 10.6
L5 2.9 3.6
L6 15.9 16.4
L7 9 9.3
DIA. 3 3.2
Package mechanical data Positive voltage regulator ICs
44/58 DocID2143 Rev 32
Figure 40. DPAK drawing
0068772_K
DocID2143 Rev 32 45/58
Positive voltage regulator ICs Package mechanical data
58
Table 22. DPAK mechanical data
Dim. mm
Min. Typ. Max.
A2.20 2.40
A1 0.90 1.10
A2 0.03 0.23
b0.64 0.90
b4 5.20 5.40
c0.45 0.60
c2 0.48 0.60
D6.00 6.20
D1 5.10
E6.40 6.60
E1 4.70
e2.28
e1 4.40 4.60
H 9.35 10.10
L1.00 1.50
(L1) 2.80
L2 0.80
L4 0.60 1.00
R0.20
V2
Package mechanical data Positive voltage regulator ICs
46/58 DocID2143 Rev 32
Figure 41. DPAK footprint
(q)
q. All dimensions are in millimeters
Footprint_REV_K
DocID2143 Rev 32 47/58
Positive voltage regulator ICs Package mechanical data
58
Figure 42. D²PAK (SMD 2L STD-ST) type A drawing
0079457_T
Package mechanical data Positive voltage regulator ICs
48/58 DocID2143 Rev 32
Table 23. D²PAK (SMD 2L STD-ST) mechanical data
Dim. mm
Min. Typ. Max.
A4.40 4.60
A1 0.03 0.23
b0.70 0.93
b2 1.14 1.70
c0.45 0.60
c2 1.23 1.36
D8.95 9.35
D1 7.50
E 10 10.40
E1 8.50
e2.54
e1 4.88 5.28
H 15 15.85
J1 2.49 2.69
L2.29 2.79
L1 1.27 1.40
L2 1.30 1.75
R0.4
V2
DocID2143 Rev 32 49/58
Positive voltage regulator ICs Package mechanical data
58
Figure 43. D²PAK (SMD 2L Wooseok-subcon.) drawing
0079457_T
Package mechanical data Positive voltage regulator ICs
50/58 DocID2143 Rev 32
Table 24. D²PAK (SMD 2L Wooseok-subcon.) mechanical data
Dim. mm
Min. Typ. Max.
A4.30 4.70
A1 0 0.20
b0.70 0.90
b2 1.17 1.37
c0.450.500.60
c2 1.25 1.30 1.40
D 9 9.20 9.40
D1 7.50
E 10 10.40
E1 8.50
e2.54
e1 4.88 5.08
H 15 15.30
J1 2.20 2.60
L1.79 2.79
L1 1 1.40
L2 1.20 1.60
R0.30
V2
DocID2143 Rev 32 51/58
Positive voltage regulator ICs Package mechanical data
58
Figure 44. D²PAK (SMD 2L Wooseok-subcon.) footprint
Packaging mechanical data Positive voltage regulator ICs
52/58 DocID2143 Rev 32
9 Packaging mechanical data
Figure 45. Tube for TO-220 (dual gauge ) (mm.)
Figure 46. Tube for TO-220 (single gauge) (mm.)
DocID2143 Rev 32 53/58
Positive voltage regulator ICs Packaging mechanical data
58
Figure 47. Tape for DPAK and D
2
PAK
Figure 48. Reel for DPAK and D
2
PAK
P1
A0 D1
P0
F
W
E
D
B0
K0
T
User direction of feed
P2
10 pitches cumulative
tolerance on tape +/- 0.2 mm
User direction of feed
R
Bending radius
B1
For machine ref. only
including draft and
radii concentric around B0
AM08852v1
Top cover
tape
A
D
B
Full radius G measured at hub
C
N
REEL DIMENSIONS
40mm min.
Access hole
At sl ot location
T
Tape slot
in core for
tape start 25 mm min.
width
AM08851v2
Packaging mechanical data Positive voltage regulator ICs
54/58 DocID2143 Rev 32
Table 25. DPAK and D²PAK tape and reel mechanical data
Tape Reel
Dim. mm Dim. mm
Min. Max. Min. Max.
A0 6.8 7 A 330
B0 10.4 10.6 B 1.5
B1 12.1 C 12.8 13.2
D 1.5 1.6 D 20.2
D1 1.5 G 16.4 18.4
E 1.65 1.85 N 50
F 7.4 7.6 T 22.4
K0 2.55 2.75
P0 3.9 4.1 Base qty. 2500
P1 7.9 8.1 Bulk qty. 2500
P2 1.9 2.1
R40
T 0.25 0.35
W 15.7 16.3
DocID2143 Rev 32 55/58
Positive voltage regulator ICs Order codes
58
10 Order codes
Table 26. Order codes
Part
numbers
Order code s
TO-220
(single gauge) TO-220
(dual gauge) DPAK D²PAK TO-220FP Output
voltages
L7805C L7805CV L7805CDT-TR L7805CD2T-TR L7805CP 5 V
L7805CV-DG 5 V
L7805AB L7805ABV L7805ABD2T-TR L7805ABP 5 V
L7805ABV-DG 5 V
L7805AC L7805ACV L7805ACD2T-TR L7805ACP 5 V
L7805ACV-DG 5 V
L7806C L7806CV L7806CD2T-TR 6 V
L7806CV-DG 6 V
L7806AB L7806ABV L7806ABD2T-TR 6 V
L7806ABV-DG 6 V
L7806AC L7806ACV 6 V
L7806ACV-DG 6 V
L7808C L7808CV L7808CD2T-TR 8 V
L7808CV-DG 8 V
L7808AB L7808ABV L7808ABD2T-TR 8 V
L7808ABV-DG 8 V
L7808AC L7808ACV 8 V
L7808ACV-DG 8 V
L7885C L7885CV 8.5 V
L7809C L7809CV L7809CD2T-TR L7809CP 9 V
L7809CV-DG 9 V
L7809AB L7809ABV L7809ABD2T-TR 9 V
L7809ABV-DG 9 V
L7809AC L7809ACV 9 V
L7812C L7812CV L7812CD2T-TR L7812CP 12 V
L7812CV-DG 12 V
L7812AB L7812ABV L7812ABD2T-TR 12 V
L7812ABV-DG 12 V
L7812AC L7812ACV L7812ACD2T-TR 12 V
L7812ACV-DG 12 V
Order codes Positive voltage regulator ICs
56/58 DocID2143 Rev 32
L7815C L7815CV L7815CD2T-TR L7815CP 15 V
L7815CV-DG 15 V
L7815AB L7815ABV L7815ABD2T-TR 15 V
L7815ABV-DG 15 V
L7815AC L7815ACV L7815ACD2T-TR 15 V
L7815ACV-DG 15 V
L7818C L7818CV 18 V
L7818CV-DG 18 V
L7824C L7824CV L7824CD2T-TR L7824CP 24 V
L7824CV-DG 24 V
L7824AB L7824ABV 24 V
L7824ABV-DG 24 V
L7824AC L7824ACV 24 V
L7824ACV-DG 24 V
Table 26. Order codes (continued)
Part
numbers
Order code s
TO-220
(single gauge) TO-220
(dual gauge) DPAK D²PAK TO-220FP Output
voltages
DocID2143 Rev 32 57/58
Positive voltage regulator ICs Revision history
58
11 Revision history
Table 27. Document revision history
Date Revision Changes
21-Jun-2004 12 Document updating.
03-Aug-2006 13 Order codes has been updated and new template.
19-Jan-2007 14 D²PAK mechanical data has been updated and add footprint data.
31-May-2007 15 Order codes has been updated.
29-Aug-2007 16 Added Table 1 in cover page.
11-Dec-2007 17 Modified: Table 26.
06-Feb-2008 18 Added: TO-220 mechanical data Figure 38 on page 38 , Figu re 39 on page 39,
and Table 23 on page 37. Modified: Tab le 26 on page 55.
18-Mar-2008 19 Added: Table 29: DPAK mechanical data on page 50, Table 30: Tape and reel
DPAK mech anical data on page 52. Modified: Table 26 on page 55.
26-Jan-2010 20 Modified Table 1 on page 1 and Table 23 on page 37, added: Figure 38 on
page 38 and Figure 39 on page 39, Figure 45 o n page 52 and Figure 46 on
page 52.
04-Mar-2010 21 Added notes Fig ure 38 on page 38.
08-Sep-2010 22 Modified Table 26 on page 55.
23-Nov-2010 23 A dded: T
J
= 25 °C test condition in ΔV
O
on Table 3, 4, 5, 6, 7, 8 and Table 9.
16-Sep-2011 24 Modified title on page 1.
30-Nov-2011 25 Added: order codes L7805CV -DG, L7806 CV -DG, L7808ABV -DG, L78 12CV -DG
and L7815CV-DG Table 26 on page 55.
08-Feb-2012 26 Added: order codes L7805ACV-DG, L7805ABV-DG, L7806ABV-DG, L7808CV-
DG, L7809CV-DG, L7812ACV-DG, L7818CV-DG, L7824CV-DG Table 26 on
page 55.
27-Mar-2012 27 Added: order codes L7812ABV-DG, L7815ABV-DG Table 26 on page 55.
27-Apr-2012 28 Modified: V
I
= 10.4 to 23 V ==> V
I
= 11.4 to 23 V test conditon value
Line regulation Table 6 on page 12.
10-May-2012 29 Added: order codes L7806ACV-DG, L7808ACV-DG, L7815ACV-DG,
L7824ABV-DG and L7824ACV-DG Table 26 on page 55.
19-Sep-2012 30 Mo dified load regulation units f rom V to mV in Table 3 to Table 9.
12-Mar-2013 31 Modified: V
O
output voltage at 25 °C min. value 14.4 V Table 16 on page 22.
04-Mar-2014 32
Part numbers L78xx, L78xxC, L78xxAB, L78xxAC changed to L78.
Removed TO-3 package.
Updated the description in cover page, Section 2: Pin confi guratio n, Section 3:
Maximum ratings, Section 4: Test circuits, Section 5: Electrical char acteri sti cs ,
Section 6: Application information, Section 8: Package mechanical data and
Table 26: Order codes.
Added Section 9: Packaging mechanical data.
Minor text changes.
Positive voltage regulator ICs
58/58 DocID2143 Rev 32
Please Read Carefully:
Informa tion in this do cument is prov ided solely in connec tion with ST products. STMic roelect ronics NV and its subsidiari es (“ST”) reser ve the
right to mak e chang es, c or recti ons , modif ic ations or improv ement s, t o th is documen t, and the prod ucts an d servic es des crib ed he rein a t any
time, without notice.
All ST produ cts are sold pursuant to ST ’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoev er relating to the choice, selection or us e of the ST products and services described herein.
No license, expres s o r implied, by estoppel or otherwise, to any intellectual propert y rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST produ cts with provis ions different f rom the statement s and/or technic al features set forth in this document shall i mmediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liabili ty of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information pre viously supplied.
The ST logo is a registered trademark of STMicroelect r onics. All other names are the property of their respective owners .
© 2014 STMicroelec tronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Phili ppines - Singapore - Spain - Sweden - Switz erland - United Kingdom - United States of America
www.st.com