Bulletin I27293 12/06 IRKCS201/045P SCHOTTKY RECTIFIER 200 Amp Description/ Features (1) The IRKCS201.. Schottky rectifier Common Cathode has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175C junction temperature. Typical applications are in high current switching power supplies, plating power supplies, UPS systems, converters, free-wheeling diodes, welding, and reverse battery protection. + (2) 175C TJ operation Low forward voltage drop High frequency operation (3) Guard ring for enhanced ruggedness and long term reliability UL pending TOTALLY LEAD-FREE, RoHS Compliant Mechanical Description The Generation V of Add-A-pak module combine the excellent thermal performance obtained by the usage of Direct Bonded Copper substrate with superior mechanical ruggedness, thanks to the insertion of a solid Copper baseplate at the bottom side of the device. The Cu baseplate allow an easier mounting on the majority of heatsink with increased tolerance of surface roughness and improve thermal spread. The Generation V of AAP module is manufactured without hard mold, eliminating in this way any possible direct stress on the leads. The electrical terminals are secured against axial pull-out: they are fixed to the module housing via a click-stop feature already tested and proved as reliable on other IR modules. Major Ratings and Characteristics Characteristics Values Units IF(AV) Rectangular 200 A VRRM 45 V IFSM @ tp = 5 s sine 8600 A VF @ 100Apk, TJ=125C 0.65 V TJ range - 55 to 175 C waveform Document Number: 94429 Outline TO-240AA www.vishay.com 1 IRKCS201/ 045P Bulletin I27293 12/06 Voltage Ratings Parameters VR IRKCS201/045P Max. DC Reverse Voltage (V) 45 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Values Units Per Module Current 200 A Per Leg 100 Max. Peak One Cycle Non-Repetitive 8600 Surge Current 1850 EAS Non-Repetitive Avalanche Energy 270 mJ IAR Repetitive Avalanche Current (Per Leg) 20 A IFSM A Conditions 50% duty cycle @ TC = 120 C, rectangular wave form 5s Sine or 3s Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied TJ = 25 C, IAS = 24 Amps, L = 1mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM Values Units Max. Forward Voltage Drop (1) Max. Reverse Leakage Current (1) Conditions 0.7 0.92 V V @ 100A @ 200A 0.65 V @ 100A 0.86 V @ 200A 10 mA TJ = 25 C 90 mA TJ = 125 C TJ = 25 C TJ = 125 C VR = rated VR CT Max. Junction Capacitance 5200 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25C LS Typical Series Inductance 7.0 nH From top of terminal hole to mounting plane dv/dt Max. Voltage Rate of Change VINS 10000 RMS isolation voltage (1 sec) 3500 V/ s (Rated VR) V 50 Hz, circuit to base, all terminals shorted (1) Pulse Width < 500s Thermal-Mechanical Specifications Parameters Values Units TJ Max. Junction Temperature Range -55 to 175 Tstg Max. Storage Temperature Range -55 to 175 Conditions C C RthJC Max. Thermal Resistance, Junction to Case (Per Leg) 0.6 C/W DC operation RthCS Max. Thermal Resistance, case to Heatsink 0.1 C/W Mounting Surface, smooth and greased wt T Approximate Weight Mounting Torque 10% Case Style Document Number: 94429 to heatsink busbar 110 (4) gr (oz) 5 Nm 4 TO - 240AA JEDEC www.vishay.com 2 IRKCS201/ 045P Bulletin I27293 12/06 1000 1000 Reverse Current - IR (mA) 175C 100 125C 10 1 0.1 25C 0.01 0.001 5 10 15 20 25 30 35 40 45 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 10000 10 Junction Capacitance - CT (pF) Instantaneous Forward Current - IF (A) Tj = 175C 100 Tj = 125C Tj = 25C 1 Tj = 25C 1000 0.0 0.5 1.0 1.5 2.0 2.5 Forward Voltage Drop - VFM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics 0 10 20 30 40 50 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedance ZthJC (C/W) 1 D = 0.75 D = 0.5 D = 0.33 D = 0.25 0.1 D = 0.2 Single Pulse (Thermal Resistance) 0.01 1E-05 Document Number: 94429 1E-04 1E-03 1E-02 1E-01 1E+00 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics 1E+01 www.vishay.com 3 IRKCS201/ 045P Bulletin I27293 12/06 100 Square wave (D=0.50) 80% rated Vr applied 160 Average Power Loss - (Watts) Allowable Case Temperature (C) 180 140 120 100 DC 80 60 40 see note (2) 20 0 180 120 90 60 30 80 60 DC RMS Limit 40 20 0 0 50 100 150 200 250 300 0 Average Forward Current - IF(AV) (A) 60 90 120 150 Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Non-Repetitive Surge Current - IFSM (A) 30 Fig. 6 - Forward Power Loss Characteristics 10000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 1000 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Max. Non-Repetitive Surge Current L IRFP460 DUT Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR Document Number: 94429 www.vishay.com 4 IRKCS201/ 045P Bulletin I27293 12/06 Outline Table Dimensions are in millimeters and [inches] Ordering Information Table Device Code IR KC S 20 1 1 2 3 4 5 / 045 P 6 7 1 - International Rectifier 2 - Circuit Configuration 3 - S = Schottky Diode 4 - Average Rating (x10) 5 - Product Silicon Identification 6 - Voltage Rating (045 = 45V) 7 - Lead-Free KC = Add-A-Pak - 2 diodes/common cathode Document Number: 94429 www.vishay.com 5 IRKCS201/ 045P Bulletin I27293 12/06 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 12/06 Document Number: 94429 www.vishay.com 6 Legal Disclaimer Notice Vishay Notice The products described herein were acquired by Vishay Intertechnology, Inc., as part of its acquisition of International Rectifier's Power Control Systems (PCS) business, which closed in April 2007. Specifications of the products displayed herein are pending review by Vishay and are subject to the terms and conditions shown below. Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. International Rectifier(R), IR(R), the IR logo, HEXFET(R), HEXSense(R), HEXDIP(R), DOL(R), INTERO(R), and POWIRTRAIN(R) are registered trademarks of International Rectifier Corporation in the U.S. and other countries. All other product names noted herein may be trademarks of their respective owners. Document Number: 99901 Revision: 12-Mar-07 www.vishay.com 1