NTC Disc Thermistors General Purpose: ND 06 Professional: NV 06 These multi-purpose thermistors can be used for temperature control, compensation or measurement. This standard product is available in large quantities and with a short delivery time. GENERAL PURPOSE PROFESSIONAL ND 06 NV 06 Types Finish Coated disc with phenolic resin Varnished disc Approved by NFC 93 271 Type: TN 115 A List: GAM-T1 List: LNZ Standards 4 (.157) max +10% o 0.6 (.024)-0.05 +10% o 0.6 (.024)-0.05 5.08 (0.2) m 5.08 (0.2) m Marking 3.5 (.138) max 3 (.118) max millimeters (inches) 6 (.236) max 35 (1.38) min 35 (1.38) min DIMENSIONS: 3 (.118) max 6 (.236) max Nominal resistance Tolerance for 5%, 10% Nominal resistance Tolerance - 55/125/56 - 434 Operating temperature -55C to +150C -55C to +150C Tolerance on Rn (25C) 5%, 10%, 20% 2%, 5%, 10% 0.71 W 0.69 W 7.1 mW/C 6.9 mW/C 22 s 18 s Climatic category Maximum dissipation at 25C Thermal dissipation factor Thermal time constant m On request = 2.54 HOW TO ORDER 18 ND06 P0 0103 Type Material Code P (See table page 19) Resistance 10 k TPC K -- Tolerance K (10%) Table of Values ND 06 - NV 06 Types Rn at 25C ( ) Material Code B (K) (B/B (1) 5% (2) 3% ) a at 25C (%/C) N 06 F 0 0100 N 06 F 0 0150 10 15 F 2800 (1) - 3.2 N 06 G 0 0220 N 06 G 0 0330 22 33 G 3030 (1) - 3.4 N 06 H 0 0470 N 06 H 0 0680 47 68 H 3160 (1) - 3.5 N 06 I 0 0101 100 I 3250 (1) - 3.7 N 06 J 0 0151 N 06 J 0 0221 150 220 J 3480 (1) - 3.9 N 06 K 0 0331 N 06 K 0 0471 330 470 K 3630 (1) - 4.0 N 06 L 0 0681 N 06 L 0 0102 680 1,000 L 3790 (2) - 4.2 N 06 M 0 0152 1,500 M 3950 (2) - 4.4 N 06 N 0 0222 N 06 N 0 0332 2,200 3,300 N 4080 (2) - 4.6 N 06 P 0 0472 N 06 P 0 0682 N 06 P 0 0103 4,700 6,800 10,000 P 4220 (2) - 4.7 N 06 Q 0 0153 N 06 Q 0 0223 15,000 22,000 Q 4300 (2) - 4.7 N 06 R 0 0333 33,000 R 4400 (2) - 4.8 N 06 S 0 0473 N 06 S 0 0683 47,000 68,000 S 4520 (2) - 5.0 N 06 T 0 0104 100,000 T 4630 (2) - 5.1 N 06 U 0 0154 N 06 U 0 0224 N 06 U 0 0334 150,000 220,000 330,000 U 4840 (2) - 5.3 = D for general purpose = V for professional Resistance - Temperature characteristics: pages 32 to 35. TPC 19 Resistance Temperature Characteristics T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 32 R (T) / R25 29.51 22.33 17.09 13.12 10.45 8.160 6.499 5.221 4.228 3.450 2.836 2.348 1.956 1.640 1.383 1.173 1.0000 .8570 .7381 .6386 .5550 .4844 .4245 .3734 .3297 .2922 .2598 .2318 .2074 .1861 .1676 .1513 .1369 .1242 .1130 .1030 .09417 .08625 .07917 .07282 .06711 .06197 F 2800 TF (%) 27.5 23.7 20.4 17.4 14.8 12.5 10.4 8.6 7.0 5.6 4.4 3.3 2.4 1.6 1.0 .4 0.0 .4 .9 1.4 2.0 2.7 3.3 4.0 4.7 5.5 6.3 7.1 7.9 8.7 9.5 10.4 11.2 12.1 13.0 13.9 14.7 15.6 16.5 17.4 18.3 19.2 R (T) / R25 42.35 31.48 23.63 17.91 13.70 10.58 8.232 6.460 5.110 4.072 3.268 2.641 2.148 1.759 1.449 1.200 1.000 0.8377 0.7054 0.5969 0.5076 0.4336 0.3720 0.3206 0.2774 0.2410 0.2102 0.1839 0.1616 0.1424 0.1259 0.1117 0.09938 0.08869 0.07938 0.07124 0.06410 0.05783 0.05230 0.04741 0.04308 0.03924 I 3250 TF (%) 21.9 20.0 18.1 16.3 14.6 13.1 11.6 10.1 8.8 7.5 6.3 5.1 4.0 2.9 1.9 0.9 0.0 0.9 1.8 2.6 3.5 4.3 5.1 5.9 6.6 7.4 8.1 8.8 9.5 10.2 10.9 11.5 12.2 12.8 13.4 14.0 14.6 15.2 15.7 16.3 16.8 17.4 (%/C) 5.81 5.56 5.33 5.11 4.90 4.71 4.52 4.35 4.19 4.03 3.89 3.75 3.62 3.49 3.38 3.26 3.16 3.06 2.96 2.87 2.78 2.69 2.61 2.54 2.46 2.39 2.33 2.26 2.20 2.14 2.08 2.03 1.97 1.92 1.87 1.83 1.78 1.74 1.70 1.66 1.62 1.58 Material code B (K) G 3030 R (T) / R25 TF (%) (%/C) 33.43 29.7 5.81 25.27 25.7 5.59 19.29 22.1 5.39 14.87 18.9 5.20 11.56 16.0 5.02 9.069 13.5 4.84 7.171 11.3 4.68 5.715 9.3 4.52 4.589 7.6 4.37 3.711 6.1 4.22 3.021 4.7 4.09 2.476 3.6 3.96 2.042 2.6 3.83 1.694 1.8 3.71 1.413 1.1 3.60 1.186 .5 3.49 1.0000 0.0 3.38 .8476 .5 3.28 .7220 1.0 3.18 .6178 1.6 3.09 .5310 2.2 3.00 .4584 2.9 2.92 .3973 3.6 2.83 .3458 4.3 2.76 .3021 5.1 2.68 .2648 5.9 2.61 .2330 6.8 2.54 .2057 7.6 2.47 .1822 3.5 2.40 .1619 9.4 2.34 .1443 10.3 2.38 .1290 11.2 2.22 .1156 12.2 2.17 .1039 13.1 2.11 .09365 14.0 2.06 .08461 15.0 2.01 .07663 15.9 1.96 .06957 16.9 1.92 .06330 17.9 1.87 .05772 18.8 1.83 .05275 19.8 1.78 .04831 20.7 1.74 R (T) / R25 38.50 28.80 21.76 16.60 12.78 9.930 7.779 6.143 4.889 3.919 3.164 2.572 2.104 1.732 1.434 1.194 1.0000 .8417 .7121 .6053 .5169 .4434 .3820 .3305 .2870 .2502 .2189 .1923 .1694 .1498 .1328 .1181 .1054 .09430 .08460 .07610 .06863 .06204 .05623 .05107 .04649 .04242 H 3160 TF (%) 31.0 26.8 23.0 19.7 16.7 14.1 11.8 9.7 7.9 6.3 4.9 3.7 2.7 1.8 1.1 .5 0.0 .5 1.0 1.6 2.3 3.0 3.7 4.5 5.3 6.2 7.1 8.0 8.9 9.8 10.8 11.7 12.7 13.7 14.6 15.6 16.6 17.6 18.6 19.6 20.6 21.6 (%/C) 6.03 5.81 5.60 5.41 5.22 5.04 4.87 4.70 4.55 4.40 4.26 4.12 3.99 3.87 3.75 3.63 3.53 3.42 3.32 3.22 3.13 3.04 2.96 2.87 2.80 2.72 2.65 2.58 2.51 2.44 2.38 2.32 2.26 2.21 2.15 2.10 2.05 2.00 1.95 1.91 1.86 1.82 T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 (%/C) 5.98 5.78 5.59 5.41 5.23 5.06 4.90 4.74 4.59 4.45 4.31 4.18 4.05 3.92 3.81 3.69 3.58 3.48 3.38 3.28 3.19 3.10 3.01 2.93 2.85 2.77 2.70 2.63 2.56 2.49 2.43 2.36 2.30 2.25 2.19 2.14 2.08 2.03 1.98 1.94 1.89 1.85 Material code B (K) J-J5 3480 R (T) / R25 TF (%) (%/C) 51.74 34.1 6.43 37.97 29.5 6.21 28.15 25.3 6.01 21.07 21.7 5.81 15.91 18.4 5.62 12.13 15.5 5.44 9.320 12.9 5.26 7.221 10.7 5.10 5.640 8.7 4.94 4.438 7.0 4.78 3.517 5.4 4.64 2.807 4.1 4.50 2.255 3.0 4.36 1.824 2.0 4.23 1.484 1.2 4.10 1.215 .5 3.98 1.0000 0.0 3.87 .8278 .5 3.76 .6889 1.1 3.65 .5763 1.8 3.55 .4845 2.5 3.45 .4092 3.3 3.35 .3473 4.1 3.26 .2960 5.0 3.17 .2534 5.9 3.09 .2178 6.8 3.01 .1879 7.8 2.93 .1628 8.8 2.85 .1415 9.8 2.78 .1235 10.8 2.70 .1081 11.8 2.64 .09500 12.9 2.57 .08373 14.0 2.50 .07403 15.0 2.44 .06565 16.1 2.38 .05838 17.2 2.33 .05207 18.3 2.27 .04567 19.4 2.22 .04175 20.5 2.16 .03753 21.6 2.11 .03382 22.7 2.06 .03055 23.8 2.02 R (T) / R25 56.26 41.21 30.47 22.73 17.11 12.98 9.930 7.654 5.945 4.650 3.663 2.905 2.319 1.862 1.505 1.223 1.0000 .8219 .6792 .5641 .4708 .3949 .3327 .2816 .2393 .2043 .1751 .1507 .1301 .1128 .09812 .08565 .07502 .06592 .05810 .05137 .04555 .04050 .03611 .03229 .02894 .02600 K 3630 TF (%) 35.6 30.8 26.4 22.6 19.2 16.2 13.5 11.2 9.1 7.3 5.7 4.3 3.1 2.1 1.3 .6 0.0 .6 1.2 1.9 2.6 3.4 4.3 5.2 6.1 7.1 8.1 9.1 10.2 11.3 12.4 13.5 14.6 15.7 16.8 18.0 19.1 20.3 21.4 22.5 23.7 24.9 (%/C) 6.46 6.26 6.06 5.88 5.70 5.53 5.36 5.21 5.05 4.91 4.76 4.63 4.50 4.37 4.25 4.13 4.01 3.90 3.80 3.69 3.59 3.50 3.41 3.32 3.23 3.14 3.06 2.99 2.91 2.84 2.77 2.70 2.63 2.57 2.50 2.44 2.39 2.33 2.27 2.22 2.17 2.12 T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 TPC Resistance Temperature Characteristics T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 R (T) / R25 82.52 58.01 41.30 29.75 21.67 15.96 11.88 8.930 6.776 5.188 4.007 3.120 2.449 1.937 1.543 1.238 1.0000 .8129 .6648 .5409 .4525 .3765 .3148 .2646 .2235 .1896 .1616 .1383 .1189 .1026 .08889 .07729 .06745 .05906 .05189 .04573 .04043 .03585 .03188 .02843 .02543 .02279 L 3790 TF (%) 22.3 19.3 16.6 14.2 12.0 10.1 8.5 7.0 5.7 4.5 3.6 2.7 2.0 1.3 .8 .4 0.0 .3 .7 1.2 1.6 2.2 2.7 3.3 3.8 4.5 5.1 5.7 6.4 7.1 7.7 8.4 9.1 9.8 10.5 11.3 12.0 12.7 13.4 14.1 14.8 15.6 R (T) / R25 121.3 83.32 57.91 40.71 28.95 20.80 15.10 11.07 8.196 6.123 4.615 3.507 2.688 2.078 1.616 1.267 1.0000 .7949 .6360 .5120 .4148 .3380 .2769 .2282 .1890 .1573 .1316 .1106 .09338 .07919 .06744 .05767 .04951 .04267 .03691 .03204 .02791 .02440 .02139 .01882 .01660 .01469 P 4220 TF (%) 24.8 21.4 18.4 15.8 13.4 11.3 9.4 7.8 6.3 5.1 4.0 3.0 2.2 1.5 .9 .4 0.0 .4 .8 1.3 1.8 2.4 3.0 3.6 4.3 5.0 5.7 6.4 7.1 7.9 8.6 9.4 10.2 10.9 11.7 12.5 13.3 14.1 14.9 15.7 16.5 17.3 (%/C) 7.38 7.11 6.84 6.60 6.36 6.13 5.92 5.72 5.32 5.34 5.16 4.99 4.83 4.68 4.53 4.39 4.25 4.12 4.00 3.88 3.77 3.66 3.55 3.45 3.36 3.26 3.17 3.09 3.00 2.92 2.85 2.77 2.70 2.63 2.57 2.50 2.44 2.38 2.33 2.27 2.22 2.17 Material code B (K) M 3950 R (T) / R25 TF (%) (%/C) 99.56 23.2 7.71 68.95 20.1 7.42 48.38 17.3 7.15 34.37 14.8 6.89 24.71 12.5 6.64 17.96 10.6 6.41 13.20 8.8 6.18 9.803 7.3 5.97 7.351 5.9 5.77 5.585 4.7 5.57 4.251 3.7 5.39 3.275 2.8 5.21 2.544 2.0 5.04 1.992 1.4 4.88 1.572 .8 4.73 1.249 .4 4.58 1.0000 0.0 4.44 .8057 .4 4.30 .6534 .8 4.17 .5331 1.2 4.05 .4376 1.7 3.93 .3612 2.2 3.81 .2998 2.8 3.71 .2501 3.4 3.60 .2097 4.0 3.50 .1767 4.6 3.40 .1496 5.3 3.31 .1272 6.0 3.22 .1087 6.7 3.13 .09321 7.4 3.05 .08027 8.1 2.97 .06939 8.8 2.89 .06020 9.5 2.82 .05243 10.2 2.75 .04581 11.0 2.68 .04017 11.7 2.61 .03533 12.5 2.55 .03117 13.2 2.48 .02759 14.0 2.42 .02449 14.7 2.37 .02180 15.5 2.31 .01945 16.2 2.26 R (T) / R25 110.1 75.90 52.98 37.43 26.75 19.33 14.12 10.41 7.758 5.834 4.426 3.387 2.614 2.033 1.593 1.258 1.0000 .8004 .6448 .5228 .4264 .3497 .2885 .2392 .1994 .1671 .1406 .1189 .1010 .08617 .07381 .06347 .05480 .04148 .04129 .03603 .03155 .02771 .02442 .02158 .01913 .01700 N 4080 TF (%) 24.0 20.7 17.8 15.2 12.9 10.9 9.1 7.5 6.1 4.9 3.8 2.9 2.1 1.4 .9 .4 0.0 .4 .8 1.3 1.8 2.3 2.9 3.5 4.1 4.8 5.5 6.2 6.9 7.6 8.3 9.1 9.8 10.6 11.3 12.1 12.9 13.7 14.4 15.2 16.0 16.8 (%/C) 7.81 7.53 7.26 7.01 6.77 6.54 6.32 6.10 5.90 5.71 5.53 5.35 5.18 5.02 4.87 4.72 4.57 4.44 4.31 4.18 4.06 3.94 3.83 3.72 3.62 3.52 3.42 3.33 3.24 3.16 3.07 2.99 2.92 2.84 2.77 2.70 2.64 2.57 2.51 2.45 2.39 2.34 T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 (%/C) 7.88 7.61 7.36 7.11 6.88 6.66 6.44 6.24 6.04 5.85 5.67 5.49 5.33 5.16 5.01 4.86 4.72 4.58 4.45 4.32 4.20 4.06 3.96 3.86 3.75 3.65 3.55 3.45 3.36 3.28 3.19 3.11 3.03 2.95 2.88 2.81 2.74 2.67 2.61 2.55 2.49 2.43 Material code B (K) Q 4300 R (T) / R25 TF (%) (%/C) 98.02 25.5 7.14 69.51 22.0 6.95 49.72 18.9 6.77 35.86 16.2 6.59 26.08 13.7 6.42 19.12 11.6 6.26 14.12 9.7 6.10 10.51 8.0 5.94 7.876 6.5 5.79 5.946 5.2 5.64 4.520 4.1 5.50 3.460 3.1 5.36 2.666 2.2 5.23 2.067 1.5 5.09 1.613 .9 4.96 1.266 .4 4.84 1.0000 0.0 4.72 .7944 .4 4.60 .6347 .8 4.48 .5099 1.3 4.37 .4119 1.9 4.26 .3345 2.5 4.15 .2730 3.1 4.05 .2239 3.7 3.95 .1846 4.4 3.85 .1529 5.1 3.75 .1272 5.8 3.66 .1063 6.5 3.57 .08928 7.3 3.48 .07527 8.1 3.39 .06373 8.8 3.31 .05417 9.6 3.23 .04623 10.4 3.15 .03961 11.2 3.07 .03405 12.0 3.00 .02939 12.9 2.93 .02545 13.7 2.86 .02211 14.5 2.79 .01928 15.3 2.72 .01686 16.1 2.66 .01479 17.0 2.60 .01302 17.8 2.54 R (T) / R25 113.9 79.69 56.29 40.12 28.85 20.92 15.29 11.27 8.367 6.260 4.719 3.583 2.739 2.108 1.634 1.274 1.0000 .7897 .6273 .5012 .4026 .3255 .2644 .2159 .1772 .1462 .1212 .1009 .08441 .07093 .05985 .05072 .04315 .03686 .03160 .02720 .02349 .02036 .01771 .01545 .01353 .01188 R 4400 TF (%) 25.9 22.4 19.2 16.4 14.0 11.8 9.8 8.1 6.6 5.3 4.1 3.1 2.3 1.5 .9 .4 0.0 .4 .9 1.4 1.9 2.5 3.1 3.8 4.5 5.2 5.9 6.7 7.4 8.2 9.0 9.8 10.6 11.4 12.2 13.1 13.9 14.7 15.6 16.4 17.2 18.1 (%/C) 7.42 7.22 7.03 6.84 6.66 6.48 6.31 6.14 5.98 5.83 5.67 5.53 5.38 5.24 5.11 4.97 4.84 4.72 4.60 4.48 4.36 4.25 4.14 4.04 3.03 3.83 3.74 3.64 3.55 3.46 3.38 3.29 3.21 3.13 3.06 2.98 2.91 2.84 2.77 2.71 2.64 2.58 T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 TPC 33 Resistance Temperature Characteristics T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 T (C) -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 34 R (T) / R25 126.1 87.73 61.59 43.62 31.17 22.45 16.31 11.94 8.808 6.548 4.904 3.699 2.810 2.149 1.654 1.282 1.0000 .7848 .6196 .4922 .3932 .3158 .2551 .2072 .1691 .1387 .1144 .09477 .07888 .06595 .05539 .04671 .03956 .03364 .02872 .02461 .02117 .01828 .01584 .01376 .01201 .01050 S 4520 TF (%) 26.6 23.0 19.8 16.9 14.3 12.1 10.1 8.3 6.8 5.4 4.2 3.2 2.3 1.6 1.0 .4 0.0 .4 .9 1.4 2.0 2.6 3.2 3.9 4.6 5.3 6.1 6.8 7.6 8.4 9.2 10.1 10.9 11.7 12.6 13.4 14.3 15.1 16.0 16.8 17.7 18.6 R (T) / R25 60.08 43.19 31.42 23.13 17.22 12.95 9.842 7.550 5.845 4.564 3.594 2.853 2.281 1.838 1.491 1.217 1.0000 0.8267 0.6873 0.5747 0.4830 0.4081 0.3465 0.2955 0.2532 0.2179 0.1883 0.1634 0.1423 0.12441 0.10915 0.09608 0.08486 0.07519 0.06683 0.05957 0.05325 0.04774 0.04290 0.03866 0.03492 0.03162 KC 3470 TF (%) 34.0 29.4 25.3 21.6 18.4 15.5 12.9 10.7 8.7 6.9 5.4 4.1 3.0 2.0 1.2 0.5 0.0 0.5 1.1 1.8 2.5 3.3 4.1 5.0 5.9 6.8 7.8 8.7 9.7 10.8 11.8 12.9 13.9 15.0 16.1 17.2 18.3 19.4 20.5 21.6 22.7 23.8 (%/C) 7.55 7.35 7.16 6.97 6.79 6.62 6.45 6.28 6.12 5.96 5.81 5.66 5.52 5.38 5.24 5.10 4.97 4.85 4.72 4.60 4.48 4.37 4.26 4.15 4.05 3.94 3.84 3.75 3.65 3.56 3.47 3.39 3.30 3.22 3.14 3.07 2.99 2.92 2.85 2.78 2.72 2.65 Material code B (K) T 4630 R (T) / R25 TF (%) (%/C) 137.0 27.2 7.64 94.92 23.5 7.45 66.34 20.2 7.26 46.77 17.3 7.09 33.25 14.7 6.90 23.83 12.4 6.72 17.22 10.3 6.56 12.54 8.5 6.39 9.205 6.9 6.23 6.806 5.6 6.08 5.069 4.3 5.92 3.803 3.3 5.78 2.873 2.4 5.63 2.185 1.6 5.49 1.673 1.0 5.35 1.289 .4 5.22 1.0000 0.0 5.09 .7805 .4 4.96 .6129 .9 4.83 .4842 1.4 4.71 .3847 2.0 4.59 .3074 2.6 4.48 .2470 3.3 4.37 .1996 4.0 4.26 .1621 4.7 4.15 .1323 5.4 4.04 .1086 6.2 3.94 .08953 7.0 3.84 .07417 7.8 3.75 .06173 8.6 3.65 .05161 9.5 3.56 .04334 10.3 3.47 .03655 11.2 3.39 .03095 12.0 3.31 .02632 12.9 3.22 .02247 13.7 3.15 .01925 14.6 3.07 .01656 15.5 2.99 .01429 16.4 2.92 .01238 17.3 2.85 .01076 18.1 2.78 .00938 19.0 2.72 R (T) / R25 173.7 118.2 81.16 56.25 39.33 27.74 19.73 14.15 10.23 7.456 5.475 4.051 3.019 2.267 1.714 1.305 1.0000 .7715 .5991 .4681 .3681 .2911 .2316 .1853 .1491 .1207 .09813 .08023 .06592 .05443 .04515 .03763 .03151 .02650 .02237 .01897 .01615 .01381 .01185 .01020 .00882 .00765 U 4840 TF (%) 28.5 24.6 21.2 18.1 15.4 12.9 10.8 8.9 7.3 5.8 4.5 3.4 2.5 1.7 1.0 .5 0.0 .4 .9 1.5 2.1 2.8 3.4 4.2 4.9 5.7 6.5 7.3 8.2 9.0 9.9 10.8 11.7 12.6 13.5 14.4 15.3 16.2 17.1 18.0 19.0 19.9 (%/C) 8.04 7.83 7.63 7.44 7.25 7.07 6.89 6.71 6.54 6.38 6.22 6.06 5.91 5.76 5.61 5.47 5.33 5.20 5.06 4.94 4.81 4.69 4.57 4.45 4.34 4.23 4.12 4.02 3.91 3.82 3.72 3.63 3.54 3.45 3.38 3.28 3.20 3.12 3.04 2.97 2.90 2.83 T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 (%/C) 7.00 6.71 6.44 6.18 5.94 5.71 5.49 5.29 5.10 4.91 4.74 4.58 4.42 4.27 4.13 4.00 3.90 3.74 3.63 3.52 3.41 3.31 3.21 3.12 3.03 2.94 2.86 2.78 2.71 2.63 2.56 2.50 2.43 2.37 2.31 2.25 2.20 2.14 2.09 2.04 1.99 1.95 Material code B (K) MC 3910 R (T) / R25 TF (%) (%/C) 100.6 38.3 7.88 69.29 33.1 7.55 48.41 28.5 7.24 34.27 24.3 6.96 24.57 20.7 6.68 17.83 17.4 6.42 13.09 14.5 6.18 9.714 12.0 5.95 7.283 9.8 5.73 5.515 7.8 5.53 4.215 6.1 5.33 3.251 4.6 5.15 2.528 3.4 4.97 1.983 2.3 4.80 1.567 1.4 4.65 1.247 0.6 4.49 1.0000 0.0 4.40 0.8072 0.6 4.21 0.6558 1.3 4.08 0.5361 2.0 3.96 0.4409 2.8 3.84 0.3647 3.7 3.72 0.3033 4.6 3.61 0.2535 5.6 3.51 0.2130 6.6 3.41 0.1798 7.7 3.31 0.1525 8.7 3.22 0.1299 9.9 3.13 0.1112 11.0 3.05 0.09551 12.1 2.97 0.08238 13.3 2.89 0.07132 14.5 2.81 0.06198 15.7 2.74 0.05405 16.9 2.67 0.04730 18.1 2.60 0.04153 19.3 2.54 0.03657 20.6 2.48 0.03231 21.8 2.42 0.02863 23.0 2.36 0.02544 24.3 2.30 0.02267 25.5 2.25 0.02025 26.8 2.20 R (T) / R25 115.8 79.70 55.53 39.14 27.90 20.11 14.64 10.77 7.995 5.991 4.529 3.453 2.655 2.057 1.606 1.263 1.0000 .7973 .6398 .5167 .4198 .3430 .2819 .2329 .1934 .1615 .1354 .1141 .09660 .08212 .07011 .06010 .05172 .04467 .03873 .03370 .02942 .02576 .02264 .01995 .01764 .01564 N5 TF (%) 16.3 14.1 12.1 10.4 8.8 7.4 6.2 5.1 4.2 3.3 2.6 2.0 1.4 1.0 .6 .3 0.0 .3 .5 .9 1.2 1.6 2.0 2.4 2.8 3.3 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2 8.8 9.3 9.8 10.3 10.9 11.4 (%/C) 7.83 7.56 7.30 7.06 6.82 6.60 6.38 6.17 5.97 5.78 5.60 5.43 5.26 5.10 4.95 4.80 4.65 4.52 4.39 4.26 4.14 4.02 3.91 3.80 3.69 3.59 3.50 3.40 3.31 3.23 3.14 3.06 2.98 2.91 2.83 2.76 2.70 2.63 2.57 2.51 2.45 2.39 T (C) -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 TPC Resistance Temperature Characteristics T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 R (T) / R25 61.21 44.24 32.33 23.88 17.81 13.41 10.19 7.814 6.040 4.707 3.696 2.923 2.329 1.867 1.507 1.224 1.0000 .8217 .6788 .5638 .4707 .3948 .3328 .2818 .2396 .2046 .1754 .1510 .1305 .1131 .09846 .08597 .07531 .06618 .05834 .05158 .04573 .04066 .03625 .03240 .02903 .02608 KA 3625 TF (%) 7.1 6.1 5.3 4.5 3.8 3.2 2.7 2.2 1.8 1.5 1.1 .9 .6 .4 .3 .1 0.0 .1 .2 .4 .5 .7 .9 1.0 1.2 1.4 1.6 1.8 2.0 2.3 2.5 2.7 2.9 3.1 3.4 3.6 3.8 4.0 4.3 4.5 4.7 5.0 R (T) / R25 123.3 84.31 58.37 40.92 29.03 20.83 15.10 11.07 8.189 6.117 4.610 3.504 2.686 2.075 1.615 1.266 1.0000 .7949 .6359 .5119 .4145 .3376 .2765 .2276 .1883 .1566 .1308 .1098 .09258 .07838 .06662 .05686 .04871 .04189 .03614 .03130 .02719 .02370 .02072 .01817 .01598 .01410 PA 4235 TF (%) 8.3 7.2 6.2 5.3 4.5 3.8 3.2 2.6 2.1 1.7 1.3 1.0 .7 .5 .3 .1 0.0 .1 .3 .4 .6 .8 1.0 1.2 1.4 1.7 1.9 2.1 2.4 2.6 2.9 3.1 3.4 3.7 3.9 4.2 4.5 4.7 5.0 5.3 5.5 5.8 (%/C) 6.77 6.53 6.30 6.08 5.88 5.68 5.49 5.31 5.14 4.98 4.83 4.68 4.53 4.40 4.27 4.14 4.02 3.91 3.80 3.69 3.59 3.49 3.40 3.31 3.22 3.14 3.06 2.98 2.90 2.83 2.76 2.69 2.63 2.56 2.50 2.44 2.39 2.33 2.28 2.23 2.18 2.13 Material code B (K) MA 3960 R (T) / R25 TF (%) (%/C) 104.2 3.9 7.89 71.63 3.4 7.57 49.94 2.9 7.28 35.28 2.5 7.00 25.25 2.1 6.73 18.28 1.8 6.48 13.39 1.5 6.25 9.917 1.2 6.02 7.419 1.0 5.81 5.605 .8 5.61 4.275 .6 5.42 3.289 .5 5.24 2.552 .3 5.06 1.997 .2 4.90 1.574 .1 4.74 1.250 .1 4.59 1.0000 0.0 4.45 .8053 .1 4.31 .6527 .1 4.18 .5323 .2 4.06 .4367 .3 3.94 .3604 .4 3.82 .2990 .5 3.71 .2493 .6 3.61 .2090 .7 3.51 .1760 .8 3.41 .1489 .9 3.32 .1266 1.0 3.23 .1081 1.1 3.14 .09262 1.2 3.06 .07970 1.3 2.98 .06885 1.5 2.91 .05969 1.6 2.83 .05194 1.7 2.76 .04535 1.8 2.69 .03973 2.0 2.63 .03491 2.1 2.56 .03077 2.2 2.50 .02721 2.3 2.44 .02412 2.5 2.39 .02145 2.6 2.33 .01912 2.7 2.28 R (T) / R25 109.5 75.42 52.63 37.18 26.58 19.22 14.04 10.37 7.730 5.817 4.416 3.382 2.611 2.032 1.593 1.258 1.0000 .8004 .6446 .5224 .4258 .3491 .2877 .2383 .1984 .1660 .1396 .1178 .09991 .08507 .07273 .06241 .05376 .04648 .04032 .03510 .03065 .02685 .02359 .02079 .01838 .01629 NA 4100 TF (%) 8.0 6.9 6.0 5.1 4.3 3.7 3.1 2.5 2.1 1.6 1.3 1.0 .7 .5 .3 .1 0.0 .1 .3 .4 .6 .8 1.0 1.2 1.4 1.6 1.8 2.1 2.3 2.5 2.8 3.0 3.3 3.5 3.8 4.1 4.3 4.6 4.8 5.1 5.4 5.6 (%/C) 7.83 7.54 7.27 7.01 6.76 6.52 6.30 6.09 5.89 5.70 5.51 5.34 5.17 5.01 4.86 4.71 4.57 4.44 4.31 4.19 4.07 3.96 3.85 3.74 3.64 3.55 3.45 3.36 3.28 3.20 3.12 3.04 2.96 2.89 2.82 2.76 2.69 2.63 2.57 2.51 2.45 2.40 T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 (%/C) 8.00 7.71 7.43 7.17 6.92 6.69 6.46 6.25 6.05 5.85 5.67 5.49 5.32 5.16 5.01 4.86 4.72 4.58 4.45 4.32 4.20 4.09 3.98 3.87 3.77 3.67 3.58 3.48 3.40 3.31 3.23 3.15 3.07 3.00 2.93 2.86 2.79 2.73 2.67 2.61 2.55 2.49 Material code B (K) QA 4250 R (T) / R25 TF (%) (%/C) 101.8 8.3 7.36 71.33 7.2 7.13 50.51 6.2 6.91 36.14 5.3 6.70 26.11 4.5 6.50 19.05 3.8 6.31 14.02 3.2 6.12 10.41 2.6 5.85 7.791 2.1 5.78 5.879 1.7 5.62 4.470 1.3 5.46 3.424 1.0 5.31 2.642 .7 5.17 2.052 .5 5.03 1.605 .3 4.90 1.263 .1 4.77 1.0000 0.0 4.65 .7965 .1 4.53 .6380 .3 4.42 .5139 .4 4.31 .4162 .6 4.20 .3388 .8 4.10 .2771 1.0 4.00 .2278 1.2 3.90 .1881 1.4 3.81 .1560 1.7 3.72 .1300 1.9 3.63 .1088 2.1 3.55 .0914 2.4 3.47 .07708 2.6 3.39 .06527 2.9 3.31 .05547 3.2 3.24 .04731 3.4 3.17 .04049 3.7 3.10 .03478 3.9 3.03 .02996 4.2 2.96 .02590 4.5 2.90 .02246 4.7 2.84 .01953 5.0 2.78 .01704 5.3 2.72 .01490 5.5 2.67 .01307 5.8 2.61 R (T) / R25 110.7 77.22 54.43 38.76 27.86 20.22 14.81 10.94 8.143 6.112 4.622 3.522 2.702 2.087 1.623 1.270 1.0000 .7920 .6308 .5052 .4068 .3292 .2678 .2189 .1797 .1483 .1228 .1022 .08537 .07160 .06029 .05095 .04322 .03679 .03143 .02693 .02316 .01997 .01728 .01499 .01305 .01138 RA 4380 TF (%) 8.6 7.4 6.4 5.5 4.6 3.9 3.3 2.7 2.2 1.8 1.4 1.0 .8 .5 .3 .1 0.0 .1 .3 .5 .6 .8 1.0 1.3 1.5 1.7 2.0 2.2 2.5 2.7 3.0 3.2 3.5 3.8 4.1 4.3 4.6 4.9 5.2 5.4 5.7 6.0 (%/C) 7.53 7.29 7.07 6.85 6.65 6.46 6.27 6.09 5.92 5.76 5.60 5.45 5.31 5.17 5.03 4.91 4.78 4.66 4.55 4.43 4.33 4.22 4.12 4.02 3.93 3.84 3.75 3.67 3.58 3.50 3.42 3.35 3.28 3.21 3.14 3.07 3.01 2.94 2.88 2.82 2.77 2.71 T (C) - 55 - 50 - 45 - 40 - 35 - 30 - 25 - 20 - 15 - 10 -5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 TPC 35 NTC Thermistors Ordering Code HOW TO ORDER NC20 Type NC 12 NC 20 NB 12 NB 20 NB 21 NJ 28 NI 28 NK 20 ND 03 ND 06 ND 09 NR .. K 0 0103 Material NJ, NK Types: A Code NB, NC Types: C or O or 5 F Other Types: 0 G H I J K L M N P Q R S T U (See tables pages 32 to 35) M Resistance at 25C (EIA Code) Tolerance on Resistance at 25C F: 1% G: 2% H: 3% J: 5% K: 10% L: 15% M: 20% X: 25% - - Suffix NM 06 1. Resistance expressed by two significant figures 1st digit: 0 (zero) 2nd and 3rd digits: the first two significant figures of the resistance value at 25C. 4th digit: - for values 10 : the number of ZEROS to be added to the resistance value - for values 1 and 9.9 : the numerical 9 signifying that the resistance value is to be multiplied by 0.1 - for values < 1 : the numerical 8 signifying that the resistance value is to be multiplied by 0.01 Examples: 1000 : 0102 8.2 : 0829 0.47 : 0478 2. Resistance expressed by three significant figures 1st, 2nd and 3rd digits: the first three significant figures of the resistance value at 25C. 4th digit: - for values > 100 : the number of ZEROS to be added to the resistance value - for values > 10 and < 100 : the numerical 9 signifying that the resistance value is to be multiplied by 0.01 - for values > 1 and < 10 : the numerical 8 signifying that the capacitance value is to be multiplied by 0.01 Examples : 196 : 1960 47.2 : 4729 For leadless discs (types NR) see specification and ordering code on pages 22 and 23. TPC 9 Packaging IDENTIFICATION - TRACEABILITY On the packaging of all shipped thermistors, you will find a bar code label. This label gives systematic information on the type of product, part number, lot number, manufacturing date and quantity. An example is given below: This information allows complete traceability of the entire manufacturing process, from raw materials to final inspection. This is extremely useful for any information request, customer complaint or product return. BULK PACKAGING Type NC 12/20 NB 12/20/21 NJ 28 NK 20 NM 06 NV 21 NV 03 NV 06 NV 09 NR 52 Qty / Box 1000 1000 2000 5000 according to P/N Type ND 03 Qty / Box 3000 ND 06 ND 09 NF 08 NF 10 NF 13 NF 15 NF 20 1500 1500 450 450 400 250 150 TPC PE PE PE PE PE PE PE Type 04 06 08 10 12 16 20 Qty / Box 1000 1000 1000 800 500 400 250 Packaging for Automatic Insertion NTC Chip Thermistors / NC Series AUTOMATIC INSERTION 5.5 (.217) 0.2 (.008) Max 3 30 5 T K Designation Tape width Tape thickness Pitch of the sprocket holes Diameter of the sprocket holes Symbol W T P0 D0 Distance Distance (center to center) Distance (center to center) Sizes of the NC 12 (0805) E F P2 A0 B0 K Value 8 0.4 max. 4 1.5 -0 1.75 3.5 2 1.5 2.4 1.4 max. NC 20 (1206) A0 B0 K 1.95 3.55 1.5 max. A1 B1 B0 F R = 0.3 (.012) Max. The mechanical and dimensional reel characteristics are in accordance with the IEC publication 286-3. (.008) Hole [1 (.039) +0.2 -0 Cover Tape Max 3 Super 8 plastic tape packaging D0 P2 W E P0 Max 3 Max 3 A0 Direction of unreeling Tolerance 0.2 0.1 0.1 0.1 0.05 0.1 0.1 0.1 K 0.1 (size is adjustable) (K = t1 +0.2) 0.1 0.1 K 0.1 (size is adjustable) (K = t1 +0.2) +0 o180 (7.09) - 2 (.079) + 0.15 (.006) Reel o 62 (2.44) 1.5 (.059) Direction of unreeling o 12.75 (.502) - 0 Reel according to ISO/DIS 3639-2 8.4 (.331) 14.4 (.567) max. +0.15 (.006) Upper side Bottom side + 0.5 (.020) o 20.5 (.087) - 0 QUANTITY PER REEL Type NC - NB 12 NB 21 NC 20 - NB 20 Suffix BA BE BA BE TPC Qty Per Reel 4000 2000 3000 1500 53 Packaging for Automatic Insertion NTC/PTC Disc Thermistors PACKAGING AND KINK SUFFIXES Tables below indicate the suffixes to specify when ordering to get the required kink and packaging. For devices on tape, it is necessary to specify the height (H or Ho) which is the distance between the tape axis (sprocket holes axis) and the seating plane on the printed circuit board. The following types can be ordered on tape either in AMMOPACK (fan folder) or on REEL in accordance with IEC 286-2. - Straight leads: H represents the distance between the sprocket holes axis and the bottom plane of component body (base of resin or base of stand off). - Kinked leads and flat leads: Ho represents the distance between the sprocket holes axis and the base on the knee (kinked leads) or the bottom of the flat part (flat leads). millimeters (inches) NTC Suffix H 16 (0.630 16 (0.630 19.5 (0.768 19.5 (0.768 CA H Type ND 03 CB CC CD 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) Leads Packaging Straight AMMOPACK Straight REEL Straight AMMOPACK Straight REEL Leads Packaging Straight AMMOPACK Straight REEL Straight AMMOPACK Straight REEL Kinked AMMOPACK Kinked REEL Kinked AMMOPACK Kinked REEL Leads Packaging Kinked REEL Kinked REEL Kinked AMMOPACK Kinked AMMOPACK 2.54 (0.10) millimeters (inches) Suffix H or Ho 16 (0.630 16 (0.630 19.5 (0.768 19.5 (0.768 16 (0.630 16 (0.630 19.5 (0.768 19.5 (0.768 DA NTC DB Types NS ND NV 06/09 H Ho DC DD DL DM 5.08 (0.20) DN DP PTC 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5) 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) 0.5 0.020) millimeters (inches) Suffix Types PE 04 PE 06 PE 08 PE 10 Ho 16 (0.630 19.5 (0.768 16 (0.630 19.5 (0.768 D5 Ho D6 D7 D8 PACKAGING QUANTITIES Product NTC PTC 54 Quantity Per Size Type AMMOPACK ND 03 3000 ND - NV 06 1500 ND - NV 09 1500 PE 04 - 06 - 08 - 10 1500 TPC REEL 3000 1500 1500 1500 Packaging for Automatic Insertion NTC Disc Thermistors / NF Series PACKAGING AND KINK SUFFIXES The following types can be ordered on tape either in AMMOPACK (fan folder) or on REEL in accordance with IEC 286-2. Types Leads NF08 Internal Kink Straight D "Y" Kink e 3mm max. Notes H H1 H1 DIMENSIONS: millimeters (inches) I LS 0.6 (.024) d Packaging Ho = 16 Ho = 19.5 AMMOPACK DA DC Types Leads 5.08 (0.20) REEL DB DD AMMOPACK DQ DS NF08 / 10 / 13 Internal Kink Straight D REEL DR DT AMMOPACK D7 D8 REEL D5 D6 "Y" Kink e 3mm max. H DIMENSIONS: H1 Notes H1 millimeters (inches) I LS 0.8 (0.31) d Packaging Ho = 16 Ho = 19.5 AMMOPACK EA EB 7.62 (0.30) REEL EN ED AMMOPACK EC REEL EF AMMOPACK EQ REEL ER PACKAGING QUANTITIES Type NF08* (5.08) NF08 (7.62) NF10* (5.08) NF10 (7.62) NF13 (7.62) NF15 (7.62) NF20 (7.62) AMMOPACK 1000 750 - 750 750 - - TPC REEL 1000 750 - 750 750 - - 55 Automatic Insertion NTC/PTC Disc Thermistors TAPING CHARACTERISTICS Missing components A maximum of 3 consecutive components may be missing from the bandolier, surrounded by at least 6 filled positions. The number of missing components may not exceed 0.5% of the total per packing module. DIMENSIONS: The beginning and the end of tape exhibit 8 or 9 blank positions. millimeters (inches) REEL AMMOPACK 30 (1.18) Interlayer Paper [ 8 (.315) H L 42 (1.66) Inside I L 330 (13.0) h [ 31 (1.22) H 46 (1.81) I 290 (11.4) 48(1.99) Outside [ 360 (14.2) P h p p Marking on this side Reference plane H1 P1 W2 H1 E A B H W0 H0 W1 W Adhesive tape I2 d D0 P0 Direction of unreeling Cross section t A-B E Value 18 6 9 3 max. Tolerance +1 / -0.5 0.3 +0.75 / -0.5 4 16/19.5 0.2 0.5 W W0 W1 W2 D0 H0 H1 56 Dimensions Characteristics Leading tape width Adhesive tape width Sprocket hole position Distance between the top of the tape and the adhesive Diameter of sprocket hole Distance between the tape axis and the seating plane of the component Distance between the tape axis and the top of component body Value 12.7 254 Tolerance 0.2 1 0.7 0.2 +0.6 -0.1 2.54 5.08 5.08 P0 - t F 3.85 0.7 P1 12.7 0.5 0.6 0 0 1.0 5% 1.3 2 P d 3P 3h TPC Dimensions Characteristics Sprocket holes pitch Distance between 21 consecutive holes 20 pitches Total thickness of tape Lead spacing Distance between the sprocket hole axis and the lead axis Spacing of components Lead diameter Verticality of components Alignment of components