2N4401-TAP-E3 - VISHAY - Datasheet.Directory

To learn more about ON Semiconductor, please visit our website at

www.onsemi.com

Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers

will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor

product management systems do not have the ability to manage part nomenclature that utilizes an underscore

(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain

device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated

device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please

email any questions regarding the system integration to Fairchild_questions@onsemi.com.

Is Now Part of

ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number

of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right

to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and speciﬁcally disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON

Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON

Semiconductor data sheets and/or speciﬁcations can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s

technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA

Class 3 medical devices or medical devices with a same or similar classiﬁcation in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended

or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its ofﬁcers, employees, subsidiaries, afﬁliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out

of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor

is an Equal Opportunity/Afﬁrmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

2N4401 / MMBT4401 — NPN General-Purpose Amplifier

2N4401 / MMBT4401 Rev. 1.1.0

November 2014

2N4401 / MMBT4401

NPN General-Purpose Amplifier

Ordering Information

Figure 1. 2N4401 Device Package Figure 2. MMBT4401 Device Package

Part Number Marking Package Packing Method

2N4401BU 2N4401 TO- 92 3L Bulk

2N4401TF 2N4401 TO-92 3L Tape and Reel

2N4401TFR 2N4401 TO-92 3L Tape and Reel

2N4401TA 2N4401 TO-92 3L Ammo

2N4401TAR 2N4401 TO- 92 3L Ammo

MMBT4401 2X SOT-23 3L Tape and Reel

EBC TO-92

SOT-23

Mark:2X

Description

This device is designed for use as a medium power

amplifier and switch requiring collector currents up to

500 mA.

2N4401 / MMBT4401 — NPN General-Purpose Amplifier

2N4401 / MMBT4401 Rev. 1.1.0 2

Absolute Maximum Ratings(1),(2)

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-

ble above the re co mmen ded operating conditions and s tres si ng the parts to these level s i s not recommended. In addi-

tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The

absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.

Notes:

1. These ratings are based on a maximum junction temperature of 150°C.

2. These are steady-state limits. Fairchild Semiconductor should be consulted on applic ations involving pulsed or

low-duty cycle operations.

Thermal Characteristics

Values are at TA = 25°C unless otherwise noted.

Notes:

3. PCB size: FR-4, 76 mm x 114 mm x 1.57 mm (3.0 inch x 4.5 inch x 0.062 inch) with minimum land pattern size.

4. Device mounted on FR-4 PCB 1.6 inc h x 1.6 inch x 0.06 inch.

Symbol Parameter Value Unit

VCEO Collector-Emitter Voltage 40 V

VCBO Collector-Base Voltage 60 V

VEBO Emitter -Base Voltage 6.0 V

ICCollector Current - Continuous 600 mA

TJ, TSTG Operating and Storage Junction Temperature Range -55 to +150 °C

Symbol Parameter Max. Unit

2N4401(3) MMBT4401(4)

PDTotal Device Dissipation 625 350 mW

Derate Above 25°C 5.0 2.8 mW/°C

RθJC Thermal Resistance, Junction to Case 83.3 °C/W

RθJA Thermal Resistance, Junction to Ambient 200 357 °C/W

2N4401 / MMBT4401 — NPN General-Purpose Amplifier

2N4401 / MMBT4401 Rev. 1.1.0 3

Electrical Characteristics

Values are at TA = 25°C unless otherwise noted.

Note:

5. Pulse test: pulse width ≤ 300 μs, duty cycle ≤ 2.0%.

Symbol Parameter Conditions Min. Max. Unit

V(BR)CEO Collector-Emitter Breakdown

Voltage(5) IC = 1.0 mA, IB = 0 40 V

V(BR)CBO Collector-Base Breakdown

Voltage IC = 0.1 mA, IE = 0 60 V

V(BR)EBO Emitter-Base Breakdown Voltage IE = 0.1 mA, IC = 0 6.0 V

IBL Base Cut-Off Current VCE = 35 V, VEB = 0.4 V 0.1 μA

ICEX Collector Cut-Off Curren t VCE = 35 V, VEB = 0.4 V 0.1 μA

hFE DC Current Gain(5)

IC = 0.1 mA, VCE = 1.0 V 20

IC = 1.0 mA, VCE = 1.0 V 40

IC = 10 mA, VCE = 1.0 V 80

IC = 150 mA, VCE = 1.0 V 100 300

IC = 500 mA, VCE = 2.0 V 40

VCE(sat) Collector-Emitter Saturation

Voltage(5) IC = 150 mA, IB = 15 mA 0.40 V

IC = 500 mA, IB = 50 mA 0.75

VBE(sat) Base-Emitter Saturation Voltage(5) IC = 150 mA, IB = 15 mA 0.75 0.95 V

IC = 500 mA, IB = 50 mA 1.20

fTCurrent Gain - Bandwidth Product IC = 20 mA, VCE = 10 V,

f = 100 MHz 250 MHz

Ccb Collector-Base Capacitance VCB = 5.0 V, IE = 0,

f = 140 kHz 6.5 pF

Ceb Emitter-Base Capacitance VBE = 0.5 V, IC = 0,

f = 140 kHz 30 pF

hie Input Impedance IC = 1.0 mA, VCE = 10 V,

f = 1.0 kHz 1.0 15.0 kΩ

hre Voltage Feedback Ratio IC = 1.0 mA, VCE = 10 V,

f = 1.0 kHz 0.1 8.0 x10-4

hfe Small-Signal Current Gain IC = 1.0 mA, VCE = 10 V,

f = 1.0 kHz 40 500

hoe Output Admittance IC = 1.0 mA, VCE = 10 V,

f = 1.0 kHz 1.0 30 μmhos

tdDelay Time VCC = 30 V, VEB = 2 V,

IC = 150 mA, IB1 = 15 mA 15 ns

trRise Time 20 ns

tsStorage Time VCC = 30 V, IC = 150 mA,

IB1 = IB2 = 15 mA 225 ns

tfFall Time 30 ns

2N4401 / MMBT4401 — NPN General-Purpose Amplifier

2N4401 / MMBT4401 Rev. 1.1.0 4

Typical Performance Characteristics

Figure 3. Typical Pulsed Current Gain vs.

Collector Current Figure 4. Collector-Emitter Saturation Voltage vs.

Collector Current

Figure 5. Base-Emitter Saturation Voltage

vs. Collector Current Figure 6. Base-Emitter On Voltage vs.

Collector Current

Figure 7. Collector Cut-Off Current vs.

Ambient Temperature Figure 8. Emitter Transition and Output Capacitance

vs. Reverse Bias Voltage

0.1 0.3 1 3 10 30 100 300

100

200

300

400

500

I - COLLECTOR CURRENT (mA)

h - TYPICAL PULSED CURRENT GAIN

125 °C

25 °C

- 40 °C

V = 5V

110100500

0.1

0.2

0.3

0.4

I - COLLECTOR CURRENT (mA)

V - COLLECTOR-EMITTER VOLTAGE (V)

CE S AT

25 °C

β= 10

125 °C

- 40 °C

1 10 100 500

0.4

0.6

0.8

I - COLLECTOR CURRENT (mA)

V - BASE-EMITTER VOLTAGE (V)

BESAT

β= 10

25 °C

125 °C

- 40 °C

0.1 1 10 25

0.2

0.4

0.6

0.8

I - COLLECTOR CURRENT (mA)

V - BASE-EMITTER ON VOLTAGE (V)

BE (ON )

V = 5V

25 °C

125 °C

- 40 °C

25 50 75 100 125 150

0.1

100

500

T - AMBIENT TEMPERATURE ( C)

I - COLLECTOR CURRENT (nA)

V = 40V

CBO

0.1 1 10 100

REVERSE BIAS VOLTAGE (V)

CAPACITANCE (pF)

f = 1 MHz

Cob

2N4401 / MMBT4401 — NPN General-Purpose Amplifier

2N4401 / MMBT4401 Rev. 1.1.0 5

Typical Performance Characteristics (Continued)

Figure 9. Turn-On and Turn-Off Times vs.

Collector Current Figure 10. Switching Times vs.Collector Current

Figure 11. Power Dissipation vs.

Ambient Temperature Figure 12. Common Emitter Characteristics

Figure 13. Common Emitter Characteristics Figure 14. Common Emitter Characteristics

10 100 1000

160

240

320

400

I - COLLECTOR CURRENT (mA)

TIME (nS)

I = I =

ton

off

V = 25 V

10 100 1000

160

240

320

400

I - COLLECTOR CURRENT (mA)

TIME (nS)

I = I =

V = 25 V

0 25 50 75 100 125 150

0.25

0.5

0.75

TEMPERATURE ( C)

P - POWER DISSIPATION (W)

SOT-223

TO-92

SOT-23

0 102030405060

I - COLLECTOR CURRENT (mA)

CHAR. RELATIVE TO VALU ES AT I = 10mA

V = 10 V

T = 25 C

A o

hoe

hre

hfe

hie

0 20406080100

0.4

0.8

1.2

1.6

2.4

T - AMBIENT TEMPERATURE ( C)

CHAR. RELATIVE TO VALUES AT T = 25 C

V = 10 V

I = 10 mA

hoe

hre

hfe

hie

0 5 10 15 20 25 30 35

0.75

0.8

0.85

0.9

0.95

1.05

1.1

1.15

1.2

1.25

1.3

V - COLLECTOR VOLTAGE (V)

CHAR. RELATIVE TO VALUES AT V = 10V

T = 25 C

A o

hoe

hre

hfe

h ie

I = 10 mA

2N4401 / MMBT4401 — NPN General-Purpose Amplifier

2N4401 / MMBT4401 Rev. 1.1.0 6

Physical Dimensions

Figure 15. 3-Lead, TO-92, JEDEC TO-92 Compliant Straight Lead Configuration, Bulk Type

2N4401 / MMBT4401 — NPN General-Purpose Amplifier

2N4401 / MMBT4401 Rev. 1.1.0 7

Physical Dimensions (Continued)

Figure 16. 3-Lead, TO-92, Molded, 0.2 In Line Spacing Lead Form, Ammo, Tape and Reel Type

2N4401 / MMBT4401 — NPN General-Purpose Amplifier

2N4401 / MMBT4401 Rev. 1.1.0 8

Physical Dimensions (Continued)

Figure 17. 3-LEAD, SOT23, JEDEC TO-236, LOW PROFILE

LAND PATTERN

RECOMMENDATION

NOTES: UNLESS OTHERWISE SPECIFIED

A) REFERENCE JEDEC REGISTRATION

TO-236, VARIATION AB, ISSUE H.

B) ALL DIMENSIONS ARE IN MILLIMETERS.

C) DIMENSIONS ARE INCLUSIVE OF BURRS,

MOLD FLASH AND TIE BAR EXTRUSIONS.

D) DIMENSIONING AND TOLERANCING PER

ASME Y14.5M - 1994.

E) DRAWING FILE NAME: MA03DREV10

SEE DETAIL A

SEATING

PLANE

SCALE: 2X

GAGE PLANE

(0.55)

(0.93)

1.20 MAX

0.10

0.00

0.10 C

2.40±0.30

2.92±0.20

1.30+0.20

-0.15

0.60

0.37

0.20 A B

1.90

0.95

(0.29)

0.95

1.40

2.20

1.00

1.90

0.25

0.23

0.08

0.20 MIN

TRADEMARKS

The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not

intended to be an exhaustive list of all such trademarks.

AccuPower¥

Awinda

AX-CAP

BitSiC¥

Build it Now¥

CorePLUS¥

CorePOWER¥

CROSSVOLT¥

CTL¥

Current Transfer Logic¥

DEUXPEED

Dual Cool™

EcoSPARK

EfficientMax¥

ESBC¥

Fairchild

Fairchild Semiconductor

FACT Quiet Series¥

FACT

FAST

FastvCore¥

FETBench¥

FPS¥

F-PFS¥

FRFET

Global Power Resource

GreenBridge¥

Green FPS¥

Green FPS¥ e-Series¥

Gmax¥

GTO¥

IntelliMAX¥

ISOPLANAR¥

Making Small Speakers Sound Louder

and Better™

MegaBuck¥

MICROCOUPLER¥

MicroFET¥

MicroPak¥

MicroPak2¥

MillerDrive¥

MotionMax¥

MotionGrid

MTi

MTx

MVN

mWSaver

OptoHiT¥

OPTOLOGIC

OPTOPLANAR

PowerTrench

PowerXS™

Programmable Active Droop¥

QFET

QS¥

Quiet Series¥

RapidConfigure¥

Saving our world, 1mW/W/kW at a time™

SignalWise¥

SmartMax¥

SMART START¥

Solutions for Your Success¥

SPM

STEALTH¥

SuperFET

SuperSOT¥-3

SuperSOT¥-6

SuperSOT¥-8

SupreMOS

SyncFET¥

Sync-Lock™

®*

TinyBoost

TinyBuck

TinyCalc¥

TinyLogic

TINYOPTO¥

TinyPower¥

TinyPWM¥

TinyWire¥

TranSiC¥

TriFault Detect¥

TRUECURRENT

μSerDes¥

UHC

Ultra FRFET¥

UniFET¥

VCX¥

VisualMax¥

VoltagePlus¥

XS™

Xsens™

௝❺

™

* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE

RELIABILITY, FUNCTION, OR DESIGN. T

O OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE

AT HTTP://WWW.FAIRCHILDSEMI.COM.

FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY

PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.

THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY

THEREIN, WHICH COVERS THESE PRODUCTS.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE

EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.

As used herein:

1. Life support devices or systems are devices or systems which, (a) are

intended for surgical implant into the body or (b) support or sustain

life, and (c) whose failure to perform when properly used in

accordance with instructions for use provided in the labeling, can be

reasonably expected to result in a significant injury of the user.

2. A critical component in any component of a life support, device, or

system whose failure to perform can be reasonably expected to

cause the failure of the life support device or system, or to affect its

safety or effectiveness.

ANTI-COUNTERFEITING POLICY

Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,

under Sales Support.

Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their

parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed

applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the

proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild

Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors

are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical

and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise.

Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global

problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors.

PRODUCT STATUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change

in any manner without notice.

Preliminary First Production

Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild

Semiconductor reserves the right to make changes at any time without notice to improve design.

No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make

changes at any time without notice to improve the design.

Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.

The datasheet is for reference information only.

Rev. I72

www.onsemi.com

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81−3−5817−1050

www.onsemi.com

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your local

Sales Representative