Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. 2N4401 / MMBT4401 NPN General-Purpose Amplifier Description This device is designed for use as a medium power amplifier and switch requiring collector currents up to 500 mA. C E TO-92 SOT-23 EB C Mark:2X Figure 1. 2N4401 Device Package B Figure 2. MMBT4401 Device Package Ordering Information Part Number Marking Package Packing Method 2N4401BU 2N4401 TO-92 3L Bulk 2N4401TF 2N4401 TO-92 3L Tape and Reel 2N4401TFR 2N4401 TO-92 3L Tape and Reel 2N4401TA 2N4401 TO-92 3L Ammo 2N4401TAR 2N4401 TO-92 3L Ammo MMBT4401 2X SOT-23 3L Tape and Reel (c) 2001 Fairchild Semiconductor Corporation 2N4401 / MMBT4401 Rev. 1.1.0 www.fairchildsemi.com 2N4401 / MMBT4401 -- NPN General-Purpose Amplifier November 2014 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25C unless otherwise noted. Symbol Parameter Value Unit VCEO Collector-Emitter Voltage 40 V VCBO Collector-Base Voltage 60 V VEBO Emitter-Base Voltage 6.0 V 600 mA -55 to +150 C IC TJ, TSTG Collector Current - Continuous Operating and Storage Junction Temperature Range Notes: 1. These ratings are based on a maximum junction temperature of 150C. 2. These are steady-state limits. Fairchild Semiconductor should be consulted on applications involving pulsed or low-duty cycle operations. Thermal Characteristics Values are at TA = 25C unless otherwise noted. Symbol PD Max. Parameter Total Device Dissipation Unit 2N4401(3) MMBT4401(4) 625 350 mW 2.8 mW/C Derate Above 25C 5.0 RJC Thermal Resistance, Junction to Case 83.3 RJA Thermal Resistance, Junction to Ambient 200 C/W 357 C/W Notes: 3. PCB size: FR-4, 76 mm x 114 mm x 1.57 mm (3.0 inch x 4.5 inch x 0.062 inch) with minimum land pattern size. 4. Device mounted on FR-4 PCB 1.6 inch x 1.6 inch x 0.06 inch. (c) 2001 Fairchild Semiconductor Corporation 2N4401 / MMBT4401 Rev. 1.1.0 www.fairchildsemi.com 2 2N4401 / MMBT4401 -- NPN General-Purpose Amplifier Absolute Maximum Ratings(1),(2) Values are at TA = 25C unless otherwise noted. Symbol Parameter Conditions Min. Max. Unit V(BR)CEO Collector-Emitter Breakdown Voltage(5) IC = 1.0 mA, IB = 0 40 V V(BR)CBO Collector-Base Breakdown Voltage IC = 0.1 mA, IE = 0 60 V V(BR)EBO Emitter-Base Breakdown Voltage IE = 0.1 mA, IC = 0 6.0 V Base Cut-Off Current VCE = 35 V, VEB = 0.4 V Collector Cut-Off Current VCE = 35 V, VEB = 0.4 V IBL ICEX hFE (5) DC Current Gain IC = 0.1 mA, VCE = 1.0 V 20 IC = 1.0 mA, VCE = 1.0 V 40 IC = 10 mA, VCE = 1.0 V 80 IC = 150 mA, VCE = 1.0 V 100 IC = 500 mA, VCE = 2.0 V 40 0.1 A 0.1 A 300 IC = 150 mA, IB = 15 mA 0.40 IC = 500 mA, IB = 50 mA 0.75 VCE(sat) Collector-Emitter Saturation Voltage(5) VBE(sat) Base-Emitter Saturation Voltage(5) fT Current Gain - Bandwidth Product IC = 20 mA, VCE = 10 V, f = 100 MHz Ccb Collector-Base Capacitance VCB = 5.0 V, IE = 0, f = 140 kHz 6.5 pF Ceb Emitter-Base Capacitance VBE = 0.5 V, IC = 0, f = 140 kHz 30 pF hie Input Impedance IC = 1.0 mA, VCE = 10 V, f = 1.0 kHz 1.0 15.0 k hre Voltage Feedback Ratio IC = 1.0 mA, VCE = 10 V, f = 1.0 kHz 0.1 8.0 x10-4 hfe Small-Signal Current Gain IC = 1.0 mA, VCE = 10 V, f = 1.0 kHz 40 500 hoe Output Admittance IC = 1.0 mA, VCE = 10 V, f = 1.0 kHz 1.0 30 mhos VCC = 30 V, VEB = 2 V, IC = 150 mA, IB1 = 15 mA 15 ns 20 ns VCC = 30 V, IC = 150 mA, IB1 = IB2 = 15 mA 225 ns 30 ns td Delay Time tr Rise Time ts Storage Time tf Fall Time IC = 150 mA, IB = 15 mA 0.75 IC = 500 mA, IB = 50 mA 0.95 1.20 250 V V MHz Note: 5. Pulse test: pulse width 300 s, duty cycle 2.0%. (c) 2001 Fairchild Semiconductor Corporation 2N4401 / MMBT4401 Rev. 1.1.0 www.fairchildsemi.com 3 2N4401 / MMBT4401 -- NPN General-Purpose Amplifier Electrical Characteristics V CESAT - COLLECTOR-EMITTER VOLTAGE (V) h FE - TYPICAL PULSED CURRENT GAIN 500 V CE = 5V 400 125 C 300 200 25 C 100 - 40 C 0 0.1 0.3 1 3 10 30 100 I C - COLLECTOR CURRENT (mA) 300 V BE(ON) - BASE-EMITTER ON VOLTAGE (V) V BESAT - BASE-EMITTER VOLTAGE (V) = 10 - 40 C 0.8 25 C 125 C 0.6 0.4 1 I C 10 100 - COLLECTOR CURRENT (mA) = 10 0.3 25 C 0.1 - 40 C 1 10 100 I C - COLLECTOR CURRENT (mA) 500 500 1 VCE = 5V 0.8 - 40 C 25 C 0.6 125 C 0.4 0.2 0.1 1 10 I C - COLLECTOR CURRENT (mA) 25 Figure 6. Base-Emitter On Voltage vs. Collector Current Figure 5. Base-Emitter Saturation Voltage vs. Collector Current 500 100 V CB 20 = 40V CAPACITANCE (pF) I CBO - COLLECTOR CURRENT (nA) 125 C 0.2 Figure 4. Collector-Emitter Saturation Voltage vs. Collector Current Figure 3. Typical Pulsed Current Gain vs. Collector Current 1 0.4 10 1 0.1 16 12 C te 8 4 25 50 75 100 125 T A - AMBIENT TEMPERATURE ( C) 150 0.1 C ob 1 10 REVERSE BIAS VOLTAGE (V) 100 Figure 8. Emitter Transition and Output Capacitance vs. Reverse Bias Voltage Figure 7. Collector Cut-Off Current vs. Ambient Temperature (c) 2001 Fairchild Semiconductor Corporation 2N4401 / MMBT4401 Rev. 1.1.0 f = 1 MHz www.fairchildsemi.com 4 2N4401 / MMBT4401 -- NPN General-Purpose Amplifier Typical Performance Characteristics 400 I B1 = I B2 = 320 400 Ic TIME (nS) TIME (nS) V cc = 25 V 240 160 240 tr td 100 I C - COLLECTOR CURRENT (mA) 0 10 1000 CHAR. RELATIVE TO VALUES AT I C= 10mA PD - POWER DISSIPATION (W) 1 SOT-223 TO-92 0.5 SOT-23 0.25 25 50 75 100 o TEMPERATURE ( C) 125 150 V CE = 10 V I C = 10 mA 2 h re h ie h fe 1.2 hoe 0.8 0.4 0 20 40 60 80 T A - AMBIENT TEMPERATURE ( o C) 100 Figure 13. Common Emitter Characteristics (c) 2001 Fairchild Semiconductor Corporation 2N4401 / MMBT4401 Rev. 1.1.0 1000 V CE = 10 V T A = 25oC 6 hoe 4 h re 2 h fe 0 h ie 0 10 20 30 40 50 I C - COLLECTOR CURRENT (mA) 60 Figure 12. Common Emitter Characteristics 1.6 0 8 CHAR. RELATIVE TO VALUES AT VCE = 10V CHAR. RELATIVE TO VALUES AT TA = 25oC Figure 11. Power Dissipation vs. Ambient Temperature 2.4 100 I C - COLLECTOR CURRENT (mA) Figure 10. Switching Times vs.Collector Current Figure 9. Turn-On and Turn-Off Times vs. Collector Current 0 tf 80 t on 0 ts 160 t off 80 0.75 10 320 V cc = 25 V 0 10 Ic I B1 = I B2 = 10 1.3 I C = 10 mA T A = 25oC 1.25 1.2 h fe 1.15 h ie 1.1 1.05 1 h re 0.95 0.9 0.85 hoe 0.8 0.75 0 5 10 15 20 25 30 VCE - COLLECTOR VOLTAGE (V) 35 Figure 14. Common Emitter Characteristics www.fairchildsemi.com 5 2N4401 / MMBT4401 -- NPN General-Purpose Amplifier Typical Performance Characteristics (Continued) 2N4401 / MMBT4401 -- NPN General-Purpose Amplifier Physical Dimensions D Figure 15. 3-Lead, TO-92, JEDEC TO-92 Compliant Straight Lead Configuration, Bulk Type (c) 2001 Fairchild Semiconductor Corporation 2N4401 / MMBT4401 Rev. 1.1.0 www.fairchildsemi.com 6 2N4401 / MMBT4401 -- NPN General-Purpose Amplifier Physical Dimensions (Continued) Figure 16. 3-Lead, TO-92, Molded, 0.2 In Line Spacing Lead Form, Ammo, Tape and Reel Type (c) 2001 Fairchild Semiconductor Corporation 2N4401 / MMBT4401 Rev. 1.1.0 www.fairchildsemi.com 7 2N4401 / MMBT4401 -- NPN General-Purpose Amplifier Physical Dimensions (Continued) 0.95 2.920.20 3 1.40 1.30+0.20 -0.15 1 2.20 2 0.60 0.37 (0.29) 0.95 0.20 1.00 A B 1.90 1.90 LAND PATTERN RECOMMENDATION SEE DETAIL A 1.20 MAX 0.10 0.00 (0.93) 0.10 C C 2.400.30 NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE 0.23 0.08 A) REFERENCE JEDEC REGISTRATION TO-236, VARIATION AB, ISSUE H. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS ARE INCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR EXTRUSIONS. D) DIMENSIONING AND TOLERANCING PER ASME Y14.5M - 1994. E) DRAWING FILE NAME: MA03DREV10 0.25 0.20 MIN (0.55) SEATING PLANE SCALE: 2X Figure 17. 3-LEAD, SOT23, JEDEC TO-236, LOW PROFILE (c) 2001 Fairchild Semiconductor Corporation 2N4401 / MMBT4401 Rev. 1.1.0 www.fairchildsemi.com 8 TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. F-PFS FRFET(R) SM Global Power Resource GreenBridge Green FPS Green FPS e-Series Gmax GTO IntelliMAX ISOPLANAR Making Small Speakers Sound Louder and BetterTM MegaBuck MICROCOUPLER MicroFET MicroPak MicroPak2 MillerDrive MotionMax MotionGrid(R) MTi(R) MTx(R) MVN(R) mWSaver(R) OptoHiT OPTOLOGIC(R) AccuPower Awinda(R) AX-CAP(R)* BitSiC Build it Now CorePLUS CorePOWER CROSSVOLT CTL Current Transfer Logic DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMax ESBC (R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet Series FACT(R) FAST(R) FastvCore FETBench FPS OPTOPLANAR(R) (R) PowerTrench(R) PowerXSTM Programmable Active Droop QFET(R) QS Quiet Series RapidConfigure Saving our world, 1mW/W/kW at a timeTM SignalWise SmartMax SMART START Solutions for Your Success SPM(R) STEALTH SuperFET(R) SuperSOT-3 SuperSOT-6 SuperSOT-8 SupreMOS(R) SyncFET Sync-LockTM (R)* (R) TinyBoost TinyBuck(R) TinyCalc TinyLogic(R) TINYOPTO TinyPower TinyPWM TinyWire TranSiC TriFault Detect TRUECURRENT(R)* SerDes UHC(R) Ultra FRFET UniFET VCX VisualMax VoltagePlus XSTM XsensTM TM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. TO OBTAIN THE LATEST, MOST UP-TO-DATE DATASHEET AND PRODUCT INFORMATION, VISIT OUR WEBSITE AT HTTP://WWW.FAIRCHILDSEMI.COM. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in cause the failure of the life support device or system, or to affect its accordance with instructions for use provided in the labeling, can be safety or effectiveness. reasonably expected to result in a significant injury of the user. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I72 (c) Fairchild Semiconductor Corporation www.fairchildsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com