/ INDEX Scope of Sumida products, General stipulations for coil use Measurement condition, Product list NORMAL MODE CHOKES AC COMMON MODE CHOKES AC DC COMMON MODE CHOKES DC / / PAGE 4 5 / BM27 6 SLF0912 6 PFN0716 7 PFN1316 7 PFN0818 7 PFN1318 7 PFN1025 8 PFN1825 8 PFN1329 8 PFN2029 8 PFN2028 9 LF1290 10 LF2020 10 LF2115 10 PLF2117 11 LF2020B 11 LF2429 11 UU9LF 12 UU9LFH 12 UU9LFB 12 UU9LFBH 12 UU10LF 13 UU16LF 13 UU10LFB 14 UU16LFB 14 PFC1816 15 PFC1816B 15 PFC2225B 16 LF2420 16 LF2628 17 LF2823 17 UU9TF 18 UU9TFH 18 BM1012LF 18 CPFC11D60 19 CPFC6D36 19 CPFC805 19 CSLF4D17 20 CSLF4D25 20 CRR32 21 CLP42B 21 CPFC75 22 CPFC74 22 CPFC85 23 CBM43 23 SFC68 24 SFC1015 24 SFC99 25 CBM42 25 26 CBM64B Dimensions for embossed tape and reel packing with packed QTY / 27 Specifications in this catalog are subject to change without notice. It is requested you confirm the specifications when ordering. Any dimensions without tolerance are typical values. Sumida declares that no ozone depleting substances are used in the coil manufacturing process. 3 / Scope of Sumida products 1. Sumida components are manufactured and promoted for use in general electronics devices such as audiovideo equipment, home electric appliance,office automation equipment, in-car equipment,communication equipment, measurement hardware,machine accessory and medical equipment. 2. In case of using the product for the purpose other than general electronics devices, please do not fail to consult with our business headquarters, branch or business office. When the suggested recommendations are not heeded, Sumida Group shall not be held liable for any dysfunctious in or damage to the equipment with which the product is used. 3. In the event a problem occurs which may affect industrial property and any other rights of Sumida Group (or a third party) during the use of the product and information described in this catalog, Sumida Group shall not be held liable for any such problem, nor grant any license to the offending party. General stipulations for coil use 1. The specification is subject to change without prior notice as it deems necessary to reflect improvements or changes. 2. Products should not be kept in unsuitable storage conditions, such as areas susceptible to high temperatures, high humidity, dust or corrosion. 3. Don't use products in a place where dew condenses. Since dew condensation may be caused by temperature change, please pay special attantien when using products in a sealed condition. 4. Always handle products with care. 5. Don't touch electrodes directly with bare hands as oil secretions may inhibit soldering. Always ensure optimum conditions for soldering. 6. Don't bend the terminals or subject them to excessive stress. 7. Please ensure that all terminals and case lugs are completely fixed with solder onto PCB. 8. Ensure the tuning slug or cap is not fixed by solder flux during the production process. 9. Refrain from rinsing coils. If necessary, please consult with our company. 10. Avoid placing coils near the edge of the PCB. 11. Our SMD coils are designed for automatic mounting. Please be careful if soldering by hand. 12. Don't touch any exposed winding part and avoid coming into contact with the guide of electrode in automatic mounting. 13. Our specification limits the quality of the component as a single unit. Please ensure the component is thoroughly evaluated in your application circuit. 14. When using our high voltage inverter transformers, place 2mm away from the electric conductor. 15. Products under development : * A product with "PROVISIONAL" mark is under development at the moment. * The specification is subject to change without prior notice as it deems necessary to reflect improvements or changes. * Please contact us for our mass production schedule. Response to RoHS directive Sumida products are RoHS compliance. 1. AVOA 2. 3. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. -2mm PROVISIONAL RoHS RoHS 4 / Rated current D.C.R. / Impedance Characteristics / Under the condition of T= 40C Under the condition of Ta = 20C T=40 Ta= 20 Common mode Normal mode HP4291A HP4291A Noise mode Type Name Core shape Core direction Base SMD Normal Mode Common Mode / Note For Signal / BM27 Troidal / Vertical / For Power SLF0912 Troidal / Vertical / PFN0716 Troidal / Vertical / PFN1316 Troidal / Vertical / PFN0818 Troidal / Vertical / PFN1318 Troidal / Vertical / PFN1025 Troidal / Vertical / PFN1825 Troidal / Vertical / PFN1329 Troidal / Vertical / PFN2029 Troidal / Vertical / Dust Core / Dust Core / PFN2028 Troidal / Vertical / Amorphous core / For AC Line AC LF1290 Shape / Horizontal / LF2020 Shape / Vertical / LF2115 Shape / Horizontal / PLF2117 Shape / Horizontal / LF2020B Shape / Vertical / LF2429 DC Dust Core / Dust Core / Dust Core / Dust Core / Dust Core / Dust Core / Low profile product of LF2020 / LF2020 Shape / Vertical / UU9LF UU Vertical / UU9LFH UU Horizontal / UU9LFB UU Vertical / UU9LFBH UU Horizontal / UU10LF UU Vertical / UU16LF UU Vertical / UU10LFB UU Vertical / Revised high frequency characteristics of UU10L / UU10L UU16LFB UU Vertical / Revised high frequency characteristics of UU16L / UU16L PFC1816 Troidal / Vertical / PFC1816B Troidal / Vertical / PFC2225B Troidal / Vertical / LF2420 Shape / Horizontal / LF2628 Shape / Vertical / LF2823 For Signal and DC Line Radial taping / Radial taping / Dust Core / Low profile product of UU9LF / UU9LF Low profile product of UU9LFB / UU9LFB Shape / Horizontal / UU9TF UU Vertical / UU9TFH UU Horizontal / BM1012LF Troidal / Vertical / Low profile product of UU9TF / UU9TF Low profile CPFC11D60 Shape / Horizontal / Small size CPFC6D36 Shape / Horizontal / Small size CPFC805 Shape / Horizontal / Small size CSLF4D17 Shape / Vertical / CSLF4D25 Drum Ring / Vertical / Low profile CRR32 Drum+Square Pot / +POT Horizontal / For MD, DSC Signal / MDDSC CLP42B Troidal / Horizontal / Low profile CPFC75 Troidal / Horizontal / CPFC74 Troidal / Horizontal / CPFC85 Troidal / Horizontal / CBM43 Troidal / Horizontal / SFC68 Troidal / Vertical / SFC1015 Troidal / Vertical / SFC99 Troidal / Vertical / CBM42 Balun / Horizontal / Available 3 line / 3 CBM64B Balun / Horizontal / Available 3 line / 3 Large type for SFC68 / SFC68 5 OUTLINE / Removal of high frequency noise of data lines for various kinds of digital equipments. DIMENSIONS (mm) Impedance Characteristics / Max. 7.5 Max. 2.5 2000 25.5 IMPEDANCE () Max. 8.7 1600 5.0 1200 BM27-300-6A 800 400 o0.5 0 0.1M Specifications / Parts No. Impedance (@10MHz 0.1V) Min. 450 Max. 50m BM27-300-6A Min. 620 Max. 60m BM27-400-6A Min. 860 Max. 70m 1M 10M 100M 500M FREQUENCY (Hz) APPLICATION / / Normal mode chokes. * Data communication equipment. * Hard disk drive. * Image scanner. 1. Low cost type. 2. Using ferrite core which enables high impedance in high frequency band. 3. High impedance for normal mode noise. 4. Automatic mounting is possible by delivery of radial tape. 1. 2. 3. 4. OUTLINE BM27-200-6A D.C.R. BM27-200-6A FEATURES BM27-400-6A / Normal mode chokes. DIMENSIONS (mm) Impedance Characteristics / Max. 9.5 Max. 6.3 3.0 560N 2.7 3.5 Max. 12.7 IMPEDANCE (k) 2.5 390N 2.2 2.0 270N 1.7 1.4 180N 1.2 0.9 (5.0) o0.5 0.7 0.5 2M Specifications / Parts No. D.C.R. Rated current @100kHz SLF0912-180N 18H Max. 77m 1.8A SLF0912-270N 27H Max. 100m 1.3A SLF0912-390N 39H Max. 150m 1.1A SLF0912-560N 56H Max. 260m 800mA FEATURES / 1. Using iron dust core. 2. Effective high noise absorption. 3. Automatic mounting is possible by delivery of radial tape. 1. 2. 3. 6 5M 10M 20M 30M 40M FREQUENCY (Hz) Inductance APPLICATION / 1. PC, microcomputer application equipments, IC application, household electric appliance equipments. 1. IC / Normal mode chokes. DIMENSIONS (mm) Impedance Characteristics / Max. 16.5 7000 (10.0) Max. 1.5 Non Solderdip Max. 8.0 Solder IMPEDANCE () OUTLINE NM39A 3500 NM29A Max. o0.65 0 1M DIMENSIONS (mm) 10M 100M FREQUENCY (Hz) Max. 16.5 (10.0) Max. 20.5 Specifications / Parts No. Inductance D.C.R. Rated current PFN0716/PFN1316-NM29A Min. 21H Max. 43m 5.4A PFN0716/PFN1316-NM39A Min. 37H Max. 58m 2.9A (10.5) Max. 18.5 Max. 14.5 DIMENSIONS (mm) Impedance Characteristics / Max. o19.0 7000 Solder NM51A IMPEDANCE () (10.0) Max. 1.5 Non Solderdip Max. 9.5 NM41A 3500 NM30A Max. o0.7 0 1M DIMENSIONS (mm) 10M 100M FREQUENCY (Hz) Max. o19.0 (10.0) Max. 22.5 Specifications / Max. 16.0 (10.5) Parts No. Inductance D.C.R. Rated current PFN0818/PFN1318-NM30A Min. 21H Max. 41m 3.7A PFN0818/PFN1318-NM41A Min. 39H Max. 57m 3.1A PFN0818/PFN1318-NM51A Min. 60H Max. 71m 2.6A Max. 14.5 FEATURES / 1. The DC satulation characteristic is good and the noise absorption effect is high, due to the iron dust core. 2. Less leakage magnetic flux and core groan by using troidal core. 1. 2. APPLICATION / EMI for power line and signal line for verious kinds of electric equipments. * Line filters for input of swiching power supply. * Noise prevention used in thyristors such as SCR and triac. * Countermeasures for DC spike noise. * Immunity for automotive related electric device. * Immunity for home electric device with microcomputer. EMI SCR DC 7 / Normal mode chokes. DIMENSIONS (mm) Impedance Characteristics / Max. o26.0 7000 (10.0) Max. 1.5 Non Solderdip Max. 12.0 Solder NM56A IMPEDANCE () OUTLINE NM46A 3500 NM34A Max. o0.9 0 100k DIMENSIONS (mm) 1M 10M 50M FREQUENCY (Hz) Max. o26.0 (10.0) Max. 29.0 Specifications / Inductance D.C.R. Rated current PFN1025/PFN1825-NM34A Min. 32H Max. 31m 4.9A PFN1025/PFN1825-NM46A Min. 59H Max. 43m 4.3A PFN1025/PFN1825-NM56A Min. 88H Max. 53m 3.7A (15.0) Max. 24.0 Max. 19.0 DIMENSIONS (mm) Impedance Characteristics / Max. o30.0 7000 Solder NM53A IMPEDANCE () (10.0) Max. 1.5 Non Solderdip Max. 13.0 Parts No. NM42A 3500 Max. o1.1 0 100k DIMENSIONS (mm) 1M 10M 50M FREQUENCY (Hz) Max. o30.0 10.0 Max. 35.5 Specifications / Max. 24.0 FEATURES 16.0 Max. 21.0 Parts No. Inductance D.C.R. Rated current PFN1329/PFN2029-NM42A Min. 52H Max. 30m 6.1A PFN1329/PFN2029-NM53A Min. 83H Max. 38m 5.4A o1.1 / 1. The DC satulation characteristic is good and the noise absorption effect is high, due to the iron dust core. 2. Less leakage magnetic flux and core groan by using troidal core. 1. 2. APPLICATION / EMI for power line and signal line for verious kinds of electric equipments. * Line filters for input of swiching power supply. * Noise prevention used in thyristors such as SCR and triac. * Countermeasures for DC spike noise. * Immunity for automotive related electric device. * Immunity for home electric device with microcomputer. EMI SCR DC 8 OUTLINE / Normal mode chokes. DIMENSIONS (mm) Impedance Characteristics / Max. 26.0 15k (10.0) IMPEDANCE () Max. 31.0 30k Max. 24.0 (16.0) Max. 21.0 0 100k 1M 10M FREQUENCY (Hz) FEATURES / 1. Toroidal gapless core minimizes the leakage of magnetic flux. 2. Easy mounting on PCB because of having pin base. 1. 2. Specifications / Parts No. Inductance D.C.R. Rated current PFN2028-NM42A Min. 52H Max. 20m 6.4A PFN2028-NM53A Min. 83H Max. 26m 5.4A APPLICATION / 1. Elimination of alternator noise in car audio device. 2. Elimination for normal mode noise. 3. Elimination for impulse noise. 4. For immunity. 5. Additional dummy pin available for automotive application. 1. 2. 3. 4. 5. 9 OUTLINE / Common mode chokes for effective AC line noise prevention. AC DIMENSIONS (mm) Impedance Characteristics / Max. 17.0 Max. 9.5 3.5 100k 14.0 9.0 4-o0.6 Max. 13.0 103 682 IMPEDANCE () 472 Schematics 10k 392 222 471 1k 681 102 S 2 3 S 2 3 1 4 S S or 1 FEATURES 4 100 10k 1M 10M 40M FREQUENCY (Hz) Specifications / / D.C.R. Inductance Balance Rated current (1-2) (4-3) (1-2) (4-3) @20C (50/60Hz) LF1290-471 Min. 470H Max. 50H Max. 150m 1.10Arms LF1290-681 Min. 680H Max. 50H Max. 250m 850mArms APPLICATION / 1. Noise prevention for TV, VCR, AV, OA equipments. LF1290-102 Min. 1.0mH Max. 150H Max. 350m 650mArms LF1290-222 Min. 2.2mH Max. 150H Max. 700m 450mArms 1. AVOA LF1290-392 Min. 3.9mH Max. 200H Max. 1.20 360mArms LF1290-472 Min. 4.7mH Max. 300H Max. 1.60 340mArms LF1290-682 Min. 6.8mH Max. 400H Max. 2.50 250mArms LF1290-103 Min. 10.0mH Max. 550H Max. 4.00 200mArms 1. Large inductance type in spite of its small size. 2. Exellent attenuation characteristics in low frequency. Schematics 2 13.0 4-o0.8 10.0 DIMENSIONS (mm) 3 1M 1 4 100k S S S 2 3 1 4 FEATURES(LF2115) / LF2115 1. Low profile type of LF2020. 1. LF2020 APPLICATION / 1. Noise prevention for TV, VCR, AV, OA equipments. 1. AVOA 183 10k 103 392 1k 222 100 13.0 10 17.0 Max. 22.0 o0.8 Max. 17.0 3.5 Max. 22.0 333 223 or S Impedance Characteristics / IMPEDANCE () 4.5 Max. 22.0 Max. 22.5 DIMENSIONS (mm) Max. 17.2 Inductance Parts No. 1. 2. 10 100k 1 1k 10k 100k 1M 10M 40M FREQUENCY (Hz) Specifications / Inductance Balance Rated current (1-2) (4-3) @1kHz (1-2) (4-3) @20C (50/60Hz) LF2020/LF2115-222 Min. 2.2mH Max. 150H Max. 240m 1.3Arms LF2020/LF2115-392 Min. 3.9mH Max. 150H Max. 410m 1.0Arms LF2020/LF2115-103 Min. 10.0mH Max. 550H Max. 1.00 600mArms LF2020/LF2115-183 Min. 18.0mH Max. 600H Max. 1.63 500mArms LF2020/LF2115-223 Min. 22.0mH Max. 800H Max. 2.04 400mArms LF2020/LF2115-333 Min. 33.0mH Max. 800H Max. 3.42 300mArms Inductance Parts No. D.C.R. OUTLINE / Common mode chokes for effective AC line noise prevention. AC DIMENSIONS (mm) Schematics Max. 18.1 3.8 o0.8 Max. 21.2 Max. 21.2 1 2 4 3 10.0 NEW 13.0 S S Specifications / Parts No. PLF2117 (50/60Hz) Min. 2.7mH Max. 225m 1.2A Schematics 5.0 10.0 2 3 13.0 o0.8 Max. 22.0 Rated current (4-1) (3-2) Max. 23.0 (4-1) (3-2) @20C DIMENSIONS (mm) Max. 16.0 D.C.R. Inductance 1 4 S S Specifications / Parts No. LF2020B (50/60Hz) Min. 5.0mH Max. 280m 1.5A Schematics 10.0 2 3 1 4 S S 13.0 4.0 o0.8 Max. 25.6 Rated current (1-2) (4-3) Max. 30.1 (1-2) (4-3) @20C DIMENSIONS (mm) Max. 18.4 D.C.R. Inductance Specifications / Parts No. LF2429 FEATURES Inductance D.C.R. Rated current (1-2) (4-3) (1-2) (4-3) @20C (50/60Hz) Min. 4.5mH Max. 110m 2.5A / 1. AC common mode choke coil which has excellent attenuation characteristics in low frequency band. 1. AC APPLICATION / 1. Noise prevention for TV, VCR, AV, OA equipments. 1. AVOA 11 / Common mode chokes for effective AC line noise prevention. AC DIMENSIONS (mm) Schematics Max. 11.0 Max. 3.5 3.5 1M 7.0 2 3 1 4 S S DIMENSIONS (mm) B682 B472 7.0 B471 100 10k 100k 1M 10M 8.0 FREQUENCY (Hz) Specifications / / Inductance 1. Small size and inexpensive type. 1. APPLICATION / 1. Multi-function telephone. AC adapter,FAX,Small size fluorescent light, VCR, TV. 1. ACFAX DIMENSIONS (mm) Schematics Max. 11.0 Max. 3.4 Max.16.5 2.8 Inductance Balance (1-2) (4-3) @1kHz (1-2) (4-3) @20C UU9LF(H)-B471 Min. 470H Max. 25H Max. 150m 1.0A UU9LF(H)-B681 Min. 680H Max. 25H Max. 250m 850mA UU9LF(H)-B102 Min. 1.0mH Max. 50H Max. 350m 700mA UU9LF(H)-B222 Min. 2.2mH Max. 50H Max. 700m 500mA UU9LF(H)-B392 Min. 3.9mH Max. 100H Max. 1.2 380mA UU9LF(H)-B472 Min. 4.7mH Max. 100H Max. 1.6 340mA UU9LF(H)-B682 Min. 6.8mH Max. 150H Max. 2.5 250mA UU9LF(H)-B103 Min. 10.0mH Max. 200H Max. 4.0 200mA 300 270 3 8.0 o0.6 Max. 16.5 Rated current Impedance Characteristics / 7.0 2 S 1 4 S DIMENSIONS (mm) B283 240 210 180 B163 150 120 B902 90 B502 60 B322 30 Max. 12.5 3.5 Max. 3.4 Max. 15.5 D.C.R. Parts No. IMPEDANCE (k) FEATURES B222 B102 B681 1k 3.5 o0.6 Max. 16.5 Max. 15.5 B392 10k Max. 12.5 Max. 3.5 B103 100k 8.0 o0.6 Max. 16.5 Max. 16.5 Impedance Characteristics / IMPEDANCE () OUTLINE 0 7.0 4K 10K 100K 1M 10M FEATURES 8.0 o0.6 Max. 16.5 FREQUENCY (Hz) / Inductance D.C.R. Inductance Balance (1-2) (4-3) @1kHz (1-2) (4-3) @20C UU9LFB(H)-B332 Min. 3.2mH Max. 150H Max. 1.7 360mA APPLICATION / UU9LFB(H)-B502 Min. 5.0mH Max. 200H Max. 2.81 260mA 1. Common mode noise filter for TV, VCR, Swiching power supply, NC machine, PC & PC related device, measurement equipment and control unit. UU9LFB(H)-B902 Min. 9.0mH Max. 360H Max. 5.0 180mA UU9LFB(H)-B163 Min. 16.5mH Max. 440H Max. 7.0 160mA 1. SWNC UU9LFB(H)-B283 Min. 28.0mH Max. 700H Max. 13.0 130mA 1. In the same dimensions as UU9LF, impedance characteristic in high frequency range is improved by split bobbin. 1. UU9LF 12 Specifications / Parts No. Rated current OUTLINE / Common mode chokes for effective AC line noise prevention. AC DIMENSIONS (mm) Impedance Characteristics / Max. 17.0 Max. 5.7 4.0 Max. 23.0 500k 10.0 B513 B333 B223 13.0 IMPEDANCE () o0.7 Max. 18.5 100k Schematics 2 3 1 4 S S 10k B123 B682 B332 1k 100 FEATURES 20k 100k 1M 10M 30M FREQUENCY (Hz) Specifications / / Inductance D.C.R. Inductance Balance Rated current (1-2) (4-3) @1kHz (1-2) (4-3) @20C (50/60Hz) UU10LF-B332 Min. 3.3mH Max. 100H Max. 710m 650mArms UU10LF-B682 Min. 6.8mH Max. 200H Max. 1.26 430mArms 1. VCR, TV. UU10LF-B123 Min. 12.0mH Max. 360H Max. 2.20 340mArms 1. UU10LF-B223 Min. 22.0mH Max. 440H Max. 3.64 250mArms UU10LF-B333 Min. 33.0mH Max. 660H Max. 5.74 200mArms UU10LF-B513 Min. 51.0mH Max. 1mH Max. 9.12 150mArms 1. Small size and inexpensive type. Parts No. 1. APPLICATION / DIMENSIONS (mm) Max. 28.5 Impedance Characteristics / Max. 20.0 Max. 6.6 4.5 10.0 200k 100k Schematics IMPEDANCE () 13.0 o0.7 Max. 22.0 303 203 802 10k 402 1k 152 2 3 S 2 3 S 100 10k 100k 1M 10M or S FEATURES 1 4 S 1 4 / 1. AC common mode choke coil which has excellent attenuation characteristics in low frequency band. 1. AC APPLICATION / 1. VCR, TV. 1. 20M FREQUENCY (Hz) Specifications / Inductance D.C.R. Inductance Balance Rated current (1-2) (4-3) @1kHz (1-2) (4-3) @20C (50/60Hz) UU16LF-152 Min. 1.5mH Max. 40H Max. 125m 1.9Arms UU16LF-402 Min. 4.0mH Max. 60H Max. 270m 1.2Arms UU16LF-802 Min. 8.0mH Max. 80H Max. 460m 900mArms UU16LF-203 Min. 20mH Max. 150H Max. 1.6 500mArms UU16LF-303 Min. 30mH Max. 200H Max. 2.5 400mArms Parts No. 13 / Common mode chokes for effective AC line noise prevention. AC DIMENSIONS (mm) Impedance Characteristics / Max. 17.0 Max. 5.7 500k 10.0 4.0 Max. 23.0 13.0 o0.7 Max. 18.5 100k Schematics IMPEDANCE () OUTLINE B513 B333 B223 B123 10k B682 B332 1k 2 100 3 20k 100k 1M 10M 30M FREQUENCY (Hz) S FEATURES S 4 1 Specifications / / 1. Same dimension of UU10LF and impedance characteristic in high frequency range is improved by split bobbin. 1. UU10LF APPLICATION / 1. Common mode noise filter for TV, VCR, Switching power supply, NC machine, PC & PC related device, measurement equipment and control unit. 1. SWNC DIMENSIONS (mm) Max. 28.5 D.C.R. Inductance Balance Rated current (1-2) (4-3) @20C (50/60Hz) UU10LFB-B332 Min. 3.3mH Max. 100H Max. 729m 650mArms UU10LFB-B682 Min. 6.8mH Max. 200H Max. 1.31 430mArms UU10LFB-B123 Min. 12mH Max. 360H Max. 2.23 340mArms UU10LFB-B223 Min. 22mH Max. 440H Max. 3.8 250mArms UU10LFB-B333 Min. 33mH Max. 660H Max. 5.82 200mArms UU10LFB-B513 Min. 51mH Max. 1mH Max. 9.51 150mArms (1-2) (4-3) @1kHz Impedance Characteristics / Max. 20.0 Max. 6.6 Inductance Parts No. 4.5 10.0 200k 100k Schematics IMPEDANCE () 13.0 o0.7 Max. 22.0 303 203 802 10k 402 1k 152 2 3 S 2 3 S 100 10k 100k 1M 10M or S FEATURES 1 4 S 1 4 / 1. Same dimension of UU10LF and impedance characteristic in high frequency range is improved by split bobbin. 1. UU16LF APPLICATION / 1. Common mode noise filter for TV, VCR, Switching power supply, NC machine, PC & PC related device, measurement equipment and control unit. 1. SWNC 14 20M FREQUENCY (Hz) Specifications / Inductance D.C.R. Inductance Balance Rated current (1-2) (4-3) @1kHz (1-2) (4-3) @20C (50/60Hz) UU16LFB-152 Min. 1.5mH Max. 40H Max. 200m 1.75Arms UU16LFB-402 Min. 4.0mH Max. 60H Max. 350m 1.00Arms UU16LFB-802 Min. 8.0mH Max. 80H Max. 600m 800mArms UU16LFB-203 Min. 20mH Max. 200H Max. 1.50 450mArms UU16LFB-303 Min. 30mH Max. 300H Max. 2.50 350mArms Parts No. OUTLINE / Common mode chokes for effective AC line noise prevention. AC DIMENSIONS (mm) Impedance Characteristics / Max. 18.0 12.0mH SAMPLE Max. 14.5 Max. 16.0 35.0 (10) (16) IMPENDANCE (k) Max. 1.0 15 2 30.0 Schematics s 1 25.0 20.0 15.0 10.0 5.0 0.0 4 s 100k 2 Inductance Parts No. 1. UL APPLICATION / 1. TV, VCRs, OA devices. 1. OA DIMENSIONS (mm) Max. 17.0 (Tpy.) PFC1816-123 12.0mH 180m 1.5A PFC1816-093 9.0mH 130m 2.0A PFC1816-063 6.0mH 90m 2.3A PFC1816-033 3.0mH 50m 2.5A Max. 16.0 35.0 Max. 1.0 15 2 30.0 25.0 20.0 15.0 10.0 Schematics 1 5.0 0.0 4 s 100k 2 1. Safety standard conformance such as UL. APPLICATION / 1. TV, VCRs, OA devices. Rated current (Tpy.) @100kHz,0.1V Max. 13.0 (16) / D.C.R. 12.0mH SAMPLE (10) s Impedance Characteristics / 1. UL 2M 3M 10M FREQUENCY (Hz) Specifications / / 1. Safety standard conformance such as UL. FEATURES 1M 3 IMPENDANCE (k) FEATURES 200k 300k 200k 300k 1M 2M 3M 10M FREQUENCY (Hz) 3 Specifications / Inductance Parts No. D.C.R. Rated current (Tpy.) @100kHz,0.1V (Tpy.) PFC1816B-093 9.0mH 125m 2.0A PFC1816B-063 6.0mH 100m 2.2A PFC1816B-033 3.0mH 45m 2.6A 1. OA 15 OUTLINE / Common mode chokes for effective AC line noise prevention. AC DIMENSIONS (mm) Impedance Characteristics / Max. 27.0 100k 702 502 402 IMPEDANCE () 10k 1k 152 801 451 100 (16.0) Max. 25.0 Max. 20.0 5.0 o0.9 (10.0) 10 10k 100k 1M 10M 100M FREQUENCY (Hz) Schematics 2 s 3 2 3 1 4 s or s 4 1 s Specifications / Inductance D.C.R. Inductance Balance Rated current (1-2) (4-3) @1kHz (1-2) (4-3) @20C (50/60Hz) PFC2225B-451 Min. 450H Max. 30H Max. 8.5m 10.0Arms PFC2225B-801 Min. 800H Max. 50H Max. 12.5m 8.0Arms PFC2225B-152 Min. 1.5mH Max. 80H Max. 26m 5.0Arms PFC2225B-402 Min. 4.0mH Max. 100H Max. 54m 4.0Arms APPLICATION / PFC2225B-502 Min. 5.0mH Max. 150H Max. 81m 3.0Arms 1. TV, VCRs, OA devices. PFC2225B-702 Min. 7.0mH Max. 200H Max. 135m 2.5Arms Parts No. FEATURES / 1. Safety standard conformance such as UL. 1. UL 1. OA DIMENSIONS (mm) Impedance Characteristics / 4.0 15.0 1M 153 IMPEDANCE () 103 Schematics S 2 3 1 4 S S 2 3 1 4 452 352 252 1k 100 / 30 1k 10k 100k 1M 10M 30M FREQUENCY (Hz) Specifications / Inductance D.C.R. Inductance Balance Rated current (1-2) (4-3) @1kHz (1-2) (4-3) @20C (50/60Hz) LF2420-252 Min. 2.5mH Max. 100H Max. 130m 2.0Arms LF2420-352 Min. 3.5mH Max. 150H Max. 180m 1.7Arms APPLICATION / LF2420-452 Min. 4.5mH Max. 200H Max. 210m 1.5Arms 1. Noise prevention for TV, VCR, AV, OA devices. LF2420-103 Min. 10mH Max. 300H Max. 470m 1.0Arms 1. AVOA LF2420-153 Min. 15mH Max. 400H Max. 730m 800mArms LF2420-203 Min. 20mH Max. 600H Max. 870m 700mArms LF2420-353 Min. 35mH Max. 800H Max. 1.58 600mArms 1. Inexpensive type. 2. Large inductance is possible with closed magnetic core. 1. 2. 16 10k S or FEATURES 353 203 100k 21.0 o0.8 Max. 21.0 Max. 25.2 Max. 25.2 Parts No. OUTLINE / Common mode chokes for effective AC line noise prevention. AC 500k DIMENSIONS (mm) 823 473 Max. 29.0 IMPEDANCE () Max. 19.5 223 100k 10.0 4.5 10k 103 752 1k 13.0 o0.8 Max. 27.0 222 100 30k 100k 1M 10M 30M FREQUENCY (Hz) 500k R104 R513 R273 100k IMPEDANCE () Schematics 2 3 10k R153 1k R822 R332 100 1 Specifications / 4 30k S 1M 10M 30M FREQUENCY (Hz) Standard Type / Inductance 100k S Hight Inductance Type / D.C.R. Rated current Temperature rise current (1-2) (4-3) (1-2) (4-3) @20C (50/60Hz) LF2628NP-222 Min. 2.2mH Max. 0.10 3.0Arms 50 LF2628NP-332 Min. 3.3mH Max. 0.15 2.5Arms LF2628NP-752 Min. 7.5mH Max. 0.25 LF2628NP-912 Min. 9.1mH LF2628NP-103 D.C.R. Inductance Rated current Temperature rise current (1-2) (4-3) (1-2) (4-3) @20C (50/60Hz) LF2628NP-R332 Min. 3.3mH Max. 0.10 3.0Arms 50 50 LF2628NP-R472 Min. 4.7mH Max. 0.15 2.5Arms 50 2.0Arms 50 LF2628NP-R822 Min. 8.2mH Max. 0.25 2.0Arms 50 Max. 0.30 1.8Arms 50 LF2628NP-R113 Min. 11.0mH Max. 0.30 1.8Arms 50 Min. 10.0mH Max. 0.40 1.5Arms 50 LF2628NP-R153 Min. 15.0mH Max. 0.40 1.5Arms 50 LF2628NP-153 Min. 15.0mH Max. 0.55 1.2Arms 50 LF2628NP-R183 Min. 18.0mH Max. 0.55 1.2Arms 50 LF2628NP-223 Min. 22.0mH Max. 0.7 1.0Arms 45 LF2628NP-R273 Min. 27.0mH Max. 0.7 1.0Arms 45 LF2628NP-333 Min. 33.0mH Max. 1.0 800mArms 45 LF2628NP-R393 Min. 39.0mH Max. 1.0 800mArms 45 LF2628NP-473 Min. 47.0mH Max. 1.4 700mArms 50 LF2628NP-R513 Min. 51.0mH Max. 1.4 700mArms 50 LF2628NP-623 Min. 62.0mH Max. 1.8 600mArms 45 LF2628NP-R753 Min. 75.0mH Max. 1.8 600mArms 45 LF2628NP-823 Min. 82.0mH Max. 2.4 500mArms 45 LF2628NP-R104 Min. 100.0mH Max. 2.4 500mArms 45 Parts No. Parts No. DIMENSIONS (mm) Impedance Characteristics / Max. 24.0 Max. 29.5 20.0 4.0 1M Schematics 223 IMPEDANCE () 24.0 o0.8 Max. 29.5 683 393 100k 10k 123 682 1k 182 2 s 3 2 3 s 100 or s FEATURES 1 4 s 10k 1 / 1. Inexpensive type. 2. Large inductance is possible with closed magnetic core. 1. 2. APPLICATION 1. Swiching power suppy, TV, PC, UPS. 1. SW 100k 1M 10M 100M FREQUENCY (Hz) 4 Specifications / Inductance D.C.R. Inductance Balance Rated current (1-2) (4-3) @1kHz (1-2) (4-3) @20C (50/60Hz) LF2823-182 Min. 1.8mH Max. 100H Max. 72m 2.6Arms LF2823-682 Min. 6.8mH Max. 200H Max. 230m 1.6Arms LF2823-123 Min. 12mH Max. 400H Max. 380m 1.2Arms LF2823-223 Min. 22mH Max. 500H Max. 650m 1.0Arms LF2823-393 Min. 39mH Max. 700H Max. 1.43 700mArms LF2823-683 Min. 68mH Max. 850H Max. 1.82 600mArms Parts No. 17 / DC commom mode chokes. DC DIMENSIONS (mm) Schematics Impedance Characteristics / 10M Max. 11.0 Max. 3.5 Max. 16.5 3.5 7.0 S 1M 3 203 153 8.0 o0.6 Max. 16.5 2 100k 1 4 S DIMENSIONS (mm) IMPEDANCE () OUTLINE 103 802 10k 1k 502 202 100 Max. 12.5 3.5 Max. 3.5 7.0 102 2 1 Max. 15.5 10 8.0 o0.6 Max. 16.5 501 100 1k 10k 100k 1M D.C.R. 3 4 Inductance FEATURES / 100M 1. Small size, inexpensive type. 2. It is effective to the noise countermeasure for DC line noise and immunity for multi-function telephone, PBX and FAX. 1. 2. PBXFAXDC APPLICATION / 1. 2. PBX 3. FAX DIMENSIONS (mm) Rated current (1-4) or (2-3) @1kHz (1-2) (4-3) @20C UU9TF(H)NP-501 Min. 0.5mH Max. 180m 1.13A UU9TF(H)NP-102 Min. 1.0mH Max. 270m 950mA UU9TF(H)NP-202 Min. 2.0mH Max. 530m 690mA UU9TF(H)NP-502 Min. 5.0mH Max. 1.09 500mA UU9TF(H)NP-802 Min. 8.0mH Max. 1.80 380mA UU9TF(H)NP-862 Min. 8.6mH Max. 1.90 370mA UU9TF(H)NP-103 Min. 10.0mH Max. 2.43 320mA UU9TF(H)NP-153 Min. 15.0mH Max. 3.77 260mA UU9TF(H)NP-203 Min. 20.0mH Max. 5.32 210mA Parts No. 1. Multi function telephone. 2. PBX. 3. FAX. 10M FREQUENCY (Hz) Specifications / Impedance Characteristics / 2000 Max. 10.3 4.0 Max. 12.0 7.5 1800 10.0 Schematics 2 1400 IMPEDANCE () o0.7 Max. 12.5 1600 1200 B2R7 1000 B1R9 800 B1R5 600 3 B0R8 400 B0R4 B0R2 200 S 1 4 S 0 1M 10M 100M 1G 1.8G FREQUENCY (Hz) FEATURES / 1. Effective in wide frequency band (Several MHz to several 100MHz). 2. Even if complete safty ground is impossible in circuit design, effect is expected. 3. Less influence when installing on high frequency signal line at Max. 10MHz. 1. MHz100MHz 2. 3. 10MHz APPLICATION 1. PC. 1. 18 Specifications / Inductance D.C.R. Inductance Balance Rated current (1-2) (4-3) @1kHz (1-2) (4-3) @20C (50/60Hz) BM1012LF-B0R2 Min. 0.2H Max. 150nH Max. 14.3m 3.9A BM1012LF-B0R4 Min. 0.48H Max. 180nH Max. 16.3m 3.25A BM1012LF-B0R8 Min. 0.88H Max. 200nH Max. 18.0m 3.2A BM1012LF-B1R5 Min. 1.57H Max. 230nH Max. 20.0m 3.0A BM1012LF-B1R9 Min. 1.90H Max. 250nH Max. 23.8m 2.75A BM1012LF-B2R7 Min. 2.69H Max. 280nH Max. 27.0m 2.5A Parts No. OUTLINE / DC commom mode chokes. DC DIMENSIONS (mm) Impedance Characteristics / Max. 12.8 2.1 Max. 6.5 7.5 2.1 2.45 L ONA VISI PRO 2.7 Max. 11.7 2.45 NEW Schematics Recommended land patterns(mm) 3 S 1 4 7.3 3.2 Specifications / 2.6 2.4 2.6 3.2 S 2 Parts No. CPFC11D60-100M08 DIMENSIONS (mm) 3.5 6.0A 2.1 Specifications / 2.1 4 Max. 8.0m 1.5 4.3 5.3 Recommended land patterns(mm) S 1 Min. 800 (3.1) 3 Rated current (1-2) (4-3) 5.3 Max. 3.8 Schematics S 2 D.C.R. @100MHz Impedance Characteristics / Max. 6.2 4.2 Impedance Parts No. 1.2 CPFC6D36-100M06 DIMENSIONS (mm) D.C.R. Rated current @100MHz (1-2) (4-3) Min. 600 Max. 20m 2.5A Impedance Characteristics / Max. 4.8 4.3 7.5+0.3 1.6 1.5 Max. 7.9 Impedance Schematics Recommended land patterns(mm) 3 2.3 Specifications / 2.3 3.9 S 2 Parts No. 4 1.2 S 1 FEATURES CPFC805-100M05 Impedance D.C.R. Rated current @100MHz (1-2) (4-3) Min. 500 Max. 15m 4.5A / 1. SMD type. 2. Small size. 3. High impedance at wide range frequency. 1. 2. 3. APPLICATION / 1. Effective to DC line noise for LCD TV and PC. 1. DC About CPFC11D60 / CPFC11D60 This specification might be changed without notice due to under developing and improving. Thank you for your understanding. 19 OUTLINE / Commom mode choke coil of SMD type, small size and low profile for DC line. DC DIMENSIONS (mm) Impedance vs Frequency (refrence) Max. 5.5 NEW Max. 1.9 (1.1) 1.7 (1.7) Max. 5.0 1.4 1000 CSLF4D17NP-212 CSLF4D17NP-122 1000 CSLF4D17NP-781 L ONA VISI PRO Z () CSLF4D17NP-391 0.55 Schematics Recommended land patterns(mm) 2 100 10 3.7 0.8 3 1 1 1.4 5.3 FEATURES 1 4 S S 10 100 1000 (MHz) Specifications / / Impedance Parts No. 1. High impedance at common mode (max. 210 at 100MHz). 2. Available for large current (max. 3.5A at 10MHz, Z=34). D.C.R.(Typ) Rated current @100MHz (Typ) (1-2), (3-4) 1. 100MHzMax.210 2. Max. 3.5A 100MHz Z=34 CSLF4D17NP-212 2100 70m 900mA CSLF4D17NP-122 1200 60m 950mA APPLICATION / 1. I/O of DC power supply line. 2. Digital video camera, DVD recorder, notebook PC, battery charger, PDA and other. CSLF4D17NP-781 780 50m 1000mA CSLF4D17NP-391 390 40m 1200mA 1. DC 2. DVD PCPDA About CSLF4D17 / CSLF4D17 This specification might be changed without notice due to under developing and improving. Thank you for your understanding. OUTLINE / Commom mode choke coil of SMD type, small size and low profile for DC line. DC DIMENSIONS (mm) Impedance vs Frequency (refrence) Max. 5.0 4.7 2.5 Max. 2.5 10000 Schematics Recommended land patterns(mm) 3 55 34 100 Normal 10 5.1 2.3 1.4 1.1 5.3 10 FEATURES 1 4 S / 1. High impedance at common mode (max. 210 at 10MHz). 2. Available for large current (max. 3.5A at 10MHz, Z=34). 1. 10MHzMax.210 2. Max. 3.5A 10MHz Z=34 APPLICATION / 1. I/O of DC power supply line. 2. Digital video camera, DVD recorder, notebook PC, battery charger, PDA and other. 1. DC 2. DVD PCPDA 20 01 03 05 1 1 S 02 04 2.1 2 Common 1000 IMPEDANCE () 1.38 4.2 Max. 5.4 210 132 100 100 1000 FREQUENCY (MHz) Specifications / Impedance D.C.R.(Typ) Rated current @10MHz (Typ) (1-2), (3-4) (Max) CSLF4D25-34 34 13m 3.5A CSLF4D25-55 55 17m 3.0A CSLF4D25-100 100 22m 2.5A CSLF4D25-132 132 28m 2.0A CSLF4D25-210 210 40m 1.5A Parts No. OUTLINE / Common mode noise filter for the digital equipment. DIMENSIONS (mm) FEATURES Schematics Recommended land patterns(mm) / 1. Small and low profile type. 2. Correspondence to the large current due to low D.C.R. 3. High Impedance at wide frequency band. 4. Carrier tape delivery is possible. 1. 2. 3. 4. OUTLINE APPLICATION / D.C. common mode line filter. * Digital AV equipment. * Digital still camera. * Digital video camera. D.C. AV Impedance Characteristics / Specifications / Parts No. Impedance D.C.R. Rated current @100MHz CRR32-02A Min. 800 Max. 500m 400mA CRR32-05A Min. 650 Max. 300m 460mA CRR32-07A Min. 500 Max. 200m 580mA CRR32-10A Min. 350 Max. 200m 800mA / Ultra low profile SMD type pulse transformer which is built in PCMCIA card. DIMENSIONS (mm) FEATURES Schematics Recommended land patterns(mm) / 1. One common mode choke or pulse transformer is stored in it. 1. 1 APPLICATION / 1. Common mode choke or pulse transformer for PCMCIA card. PCMCIASMD Impedance Characteristics / Specifications / Impedance D.C.R. Rated current @100MHz (Typ.) @20C CLP42B-PM11 1200 0.17 500mA CLP42B-PM09 800 0.14 500mA CLP42B-PM07 460 0.11 500mA Parts No. 1. PCMCIA 21 / DC common mode chokes. DC DIMENSIONS (mm) Impedance Characteristics / 30k Max. 5.2 1.9 2.5 Max. 6.0 0.6 Max. 9.4 IMPEDANCE () OUTLINE 3 S 1 4 (4.5) 2.85 2.5 2 10.2 IMPEDANCE () Recommended land patterns(mm) 1.2 Schematics S 102c 10k 222c 5k 100k 472c 100M FREQUENCY (Hz) 3.0k 050c 250s 1.5k 1.0k 500 0 100k 510s 1M 1. High performance. 2. Suitable for reflow soldering and conductive adhesion. 3. Operation up to 125C. Wide Inductance range. 1. 2. 3. 125 1. 2. 10M 100M 1000M FREQUENCY (Hz) Specifications / Inductance Parts No. / APPLICATION / 1. Digital communication equipment. 2. Signal line. 10M 2.5k 2.0k D.C.R. Rated current (H) CPFC75-050C 5 30% 100m 1.0A CPFC75-110C 11 30% 120m 500mA CPFC75-250C 25 30% 130m 500mA CPFC75-250S 25 30% 130m 500mA CPFC75-510C 51 30% 160m 500mA CPFC75-510S 51 30% 160m 500mA CPFC75-471C 470 30% 200m 500mA CPFC75-102C 1K - 30 / + 50% 200m 500mA CPFC75-222C 2.2K - 30 / + 50% 400m 400mA CPFC75-472C 4.7K - 30 / + 50% 550m 200mA FEATURES 1M 3.5k Max. 7.1 PR 471c 15k 0 10k NAL IO OVIS 25k 20k About CPFC75 / CPFC75 This specification might be changed without notice due to under developing and improving. Thank you for your understanding. OUTLINE / DC common mode chokes. DC DIMENSIONS (mm) Impedance Characteristics / 10k Max. 9.5 7.0 CPFC74-CB08M6 CPFC74-CB10M4 6.4 CPFC74-PS10H2A15 IMPEDANCE () 1k 2.54 Max. 5.7 1.3 Max. 5.08 0.15 CPFC74-PS02H2A20 100 CPFC74-PS02H2A25 CPFC74-PS01H2A30 10 Schematics Recommended land patterns(mm) 2 3 S 2 3 S 1 4 or S 1 4 For can bus For power supply Insulation Withstanding Impedance Resistance Voltage (10-100MHz) 9.9 FEATURES / 1. Standard product for CAN Bus. 1. CAN BUS 1. CANAVOA 500M D.C.R. (1-4) (2-3) Rated current CPFC74-CB10M4 Min. 1000 Min.100M DC200V Max. 300m 0.5A CPFC74-CB08M6 Min. 800 Min.100M DC200V Max. 250m 0.5A Specifications (For Power supply) / Withstanding Voltage D.C.R. Parts No. Impedance (coil-coil) (5sec) (1-2) (3-4 tie) CPFC74-PS10H2A15 Min. 700@100MHz Rated current DC125V Max. 120m 1.5A CPFC74-PS02H2A20 Min. 200@20-300MHz DC125V Max. 120m 2.0A CPFC74-PS03H2A25 DC125V Max. 120m 2.5A DC125V Max. 60m 3.0A Min. 300160MHz CPFC74-PS01H2A30 Min. 100@100-300MHz 22 (coil-coil) (coil-coil) (DC80V,1min) (5sec) APPLICATION / 1. CANBUS,AV,OA equipment. 100M Specifications (For CAN bus) / CAN bus Parts No. 6.7 10M FREQUENCY (Hz) 2.54 S 1 1M 1.8 1.6 OUTLINE / DC common mode chokes. DC DIMENSIONS (mm) Impedance Characteristics / Max. 5.5 7.2 IMPEDANCE () 3.4 Max. 8.2 10k 0.9 1.8 0.5 6.9 Max. 9.3 0.05 Schematics Recommended land patterns(mm) S 3 1 4 WH04 10 1.5 1 1M 2.0 2 2.5 2.8 2.5 S 6.5 WH07 100 3.0 1.5 1k 10M 100M 1G FREQUENCY (Hz) * In order to prevent short-circuiting, a solder resist is recommended. * Solder Resist FEATURES Specifications / / 1. EMI filter of 15k Ohm at 1.0 MHz. 2. Small size. 3. SMD type & Reflow soldering is available. Impedance D.C.R. (1-4) (2-3) (1-4) (2-3) CPFC85-WH07 1k(@100MHz) Max. 20m 4.00A CPFC85-WH04 300(@100MHz) Max. 20m 5.65A Parts No. 1. 1.0MHz15kEMI 2. 3. SMD & Rated current APPLICATION / 1. ADSL modem,EMI filter for telephone line. 1. ADSLEMI OUTLINE / DC common mode chokes. DC DIMENSIONS (mm) Impedance Characteristics / Max. 4.8 0.75 Max. 3.2 4000 Common Mode Impedance () 1.1 1.0 Max. 3.8 510S NAL IO OVIS Schematics PR Recommended land patterns(mm) 1.85 2 FEATURES 4 / 1. High performance. 2. Suitable for reflow soldering and conductive adhesion. 3. Operation up to 150C (for LR < 500H). 1. 2. 3. 150C APPLICATION / 1. CAN-BUS Chokes for data and signal line. 330S 220S 2000 1500 221C 1000 0 100 0.6 1 471C 2500 110C 1.70 S 3000 500 3 4.0 S 2.2 3500 1000 10000 101C 100000 1000000 Frequency (kHz) Specifications / Parts No. Inductance D.C.R. Rated current (H) CBM43-110 11 30% Max. 160m 300mA CBM43-220 22 30% Max. 220m 250mA CBM43-330 33 30% Max. 270m 200mA CBM43-510 51 30% Max. 310m 200mA CBM43-101 100 - 30 / + 50% Max. 180m 300mA CBM43-221 220 - 30 / + 50% Max. 250m 200mA CBM43-471 470 - 30 / + 50% Max. 410m 200mA 1. CAN-BUS About CBM43 / CBM43 This specification might be changed without notice due to under developing and improving. Thank you for your understanding. 23 OUTLINE / Common mode chokes for signal application. DIMENSIONS (mm) Impedance Characteristics / 6400 Max. 8.2 1.0 2.54 4.5 o0.6 Max. 6.2 PN-14 5600 IMPEDANCE () 5.08 Max. 7.5 4800 Schematics PN-12 4000 3200 PN-10 2400 PN-08 1600 800 S 2 3 S 1 4 0 100k FEATURES 400k 1M 4M 10M 40M 100M 500M FREQUENCY (Hz) Specifications / / Inductance 1. Without exerting bad influence to the video signal, common mode noise countermeasure is possible. 2. Effective in high frequency. 3. Inch pitch, pin layout. Parts No. 1. 2. 3. Impedance Rated current D.C.R. (1-4) (2-3) @1kHz (80-100MHz) SFC68-PN08 Min. 5.3H Min. 1100 67.5m 1.05A SFC68-PN10 Min. 8.0H Min. 1200 82.5m 820mA SFC68-PN12 Min. 11.5H Min. 1050 101m 680mA SFC68-PN14 Min. 15.7H Min. 650 114m 600mA APPLICATION / 1. EMI solution for PC, micro-computer applications and micro-computer related terminal equipment. 1. EMI OUTLINE / Common mode chokes for signal application. DIMENSIONS (mm) Impedance Characteristics / Max. 20.0 Max. 11.5 3.0 80k 5.08 70k Schematics s IMPEDANCE () 7.62 o0.7 Max. 16.0 302 60k 50k 202 40k 30k 20k 102 10k s 0 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) FEATURES / 1. Effective in high frequency. 1. APPLICATION / 1. Noise filter for primary power supply circuit of FAX. 2. Copy machine. 1. FAX(2) 2. 24 Specifications / Parts No. Inductance D.C.R. Rated current SFC1015-102 Min. 1.0mH Max. 0.06 3.4A SFC1015-202 Min. 2.0mH Max. 0.25 2.0A SFC1015-302 Min. 3.0mH Max. 0.28 1.35A OUTLINE / Common mode chokes for signal application. DIMENSIONS (mm) Impedance Characteristics / Schematics FEATURES Specifications / / 1. Without the influence on the signal, common mode measurement is possibility. 2. Inexpensive type. 1. 2. APPLICATION / 1. Noise filter for I/O port of the electric music equipment (Keyboard, Electric piano). 2. Various digital equipment. Inductance D.C.R. Parts No. (1-6) @100kHz (1-6) @20C SFC99-01 Min. 30H Max. 51m 2.1A SFC99-02 Min. 1.7H Max. 81m 1.25A Rated current 1. I/O 2. OUTLINE / Common mode chokes for USB2.0 (for 3 lines). USB2.0(3LINE) DIMENSIONS (mm) Impedance Characteristics / Schematics APPLICATION / 1. Printer, PC, DVC/DSC. 1. Specifications / Impedance Insulation Resistance D.C.R. Rated current Rated DC Voltage (1-6) (2-5) (3-4) (1-6) (2-5) (3-4) @20C (1-6) (2-5) (3-4) (1-6) (2-5) (3-4) Min. 100m Max. 0.1 500mA Max. 50V (1-6) (2-5) (3-4) @150MHz Min. 1k 25 OUTLINE / Line filter available for 3 line (reduce 70-120MHz) 3 70120 DIMENSIONS (mm) Impedance Characteristics / NEW NAL VISIO PRO FEATURES Schematics Recommended land patterns(mm) / 1. Small size and high efficiency 2. Correspondence to the large current 1. 2. Specifications / Inductance Parts No. Rated current (1-6) (2-5)(3-4) (1-6)(2-5)(3-4) CBM64B 3.8H(Typ) 170m(Typ) Max. 200mA APPLICATION / 1. DC/DC 2. About CBM64B / CBM64B This specification might be changed without notice due to under developing and improving. Thank you for your understanding. 26 D.C.R. 1. Line filter for DC/DC converter unit in High Brid Car. 2. Common mode choke and Balun transformer for various equipments. (1-6) (2-5)(3-4) @1MHz / 4.0 DIMENSIONS (mm) 2.0 o1.5 D A E F H C G B DIMENSIONS (mm) / TYPE QTY (PCS/REEL) A B C D E F G H CLP42B 16.0 8.0 5.2 9.8 7.5 1.75 2.6 0.4 500 CPFC74 16.0 8.0 5.9 9.5 7.5 1.75 4.6 0.4 1000 CPFC85 16.0 12.0 8.3 9.3 7.5 1.75 5.5 0.4 1000 CRR32 12.0 8.0 3.5 4.9 5.5 1.75 2.9 0.4 1000 CBM42 12.0 8.0 4.8 5.8 5.5 1.75 3.0 0.4 500 CSLF4D17 12.0 8.0 4.0 5.2 5.5 1.8 2.1 0.4 2000 CSLF4D25 12.0 8.0 4.0 6.2 5.5 1.75 2.6 0.4 2000 CPFC75 16.0 8.0 5.9 9.5 7.5 1.75 4.6 0.4 1000 CBM43 12.0 8.0 3.5 4.9 7.5 1.75 3.1 0.4 1000 CPFC11D60 24.0 20.0 12.2 13.2 11.5 1.8 6.9 0.5 500 CBM64B 16.0 12.0 8.8 6.5 7.5 1.8 5.3 0.5 1000 27