ILD615, ILQ615 Vishay Semiconductors Optocoupler, Phototransistor Output (Dual, Quad Channel) FEATURES * Identical channel to channel footprint Dual Channel A 1 8 C C 2 7 A 3 6 C C 4 5 E E * Dual and quad packages feature: - Reduced board space - Lower pin and parts count - Better channel to channel CTR match - Improved common mode rejection * Isolation test voltage from double molded package, 5300 VRMS Quad Channel i179012-1 A 1 16 C * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC C 2 15 E A 3 14 C AGENCY APPROVALS C 4 13 E * UL1577, file no. E52744 system code H, double protection A 5 12 C * CSA 93751 C 6 11 E A 7 10 C C 8 9 E * BSI IEC 60950; IEC 60065 * DIN EN 60747-5-2 (VDE0884)/DIN EN 60747-5-5 pending, available with option 1 i179052-2 V D E DESCRIPTION The ILD615, ILQ615 are multi-channel phototransistor optocouplers that use GaAs IRLED emitters and high gain NPN phototransistors. These devices are constructed using over/under leadframe optical coupling and double molded insulation technology resulting a withstand test voltage of 7500 VACPEAK and a working voltage of 1700 VRMS. The binned min./max. and linear CTR characteristics make these devices well suited for DC or AC voltage detection. Eliminating the phototransistor base connection provides added electrical noise immunity from the transients found in many industrial control environments. Because of guaranteed maximum non-saturated and saturated switching characteristics, the ILD615, ILQ615 can be used in medium speed data I/O and control systems. The binned min./max. CTR specification allow easy worst case interface calculations for both level detection and switching applications. Interfacing with a CMOS logic is enhanced by the guaranteed CTR at IF = 1 mA. Document Number: 83652 Rev. 1.6, 04-Mar-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 1 ILD615, ILQ615 Vishay Semiconductors Optocoupler, Phototransistor Output (Dual, Quad Channel) ORDERING INFORMATION I L x 6 1 5 - PART NUMBER # CTR BIN X 0 # # PACKAGE OPTION TAPE AND REEL x = D (Dual) or Q (Quad) DIP Option 6 7.62 mm 10.16 mm Option 7 Option 9 T > 0.1 mm > 0.7 mm DUAL CHANNEL QUAD CHANNEL AGENCY CERTIFIED/PACKAGE CTR (%) 10 mA UL, CSA, BSI, VDE 40 to 80 63 to 125 100 to 200 160 to 320 40 to 80 63 to 125 100 to 200 160 to 320 DIP-8 ILD615-1 ILD615-2 ILD615-3 ILD615-4 - - - - - - - ILD615-4X006 - - - - SMD-8, option 7 ILD615-1X007T - - - SMD-8, option 9 ILD615-1X009 ILD615-2X009T(1) ILD615-3X009T ILD615-4X009T(1) DIP-8, 400 mil, option 6 - - - - - - - - ILQ615-2 ILQ615-3 ILQ615-4 DIP-16 - - - - ILQ615-1 SMD-16, option 7 - - - - - SMD-16, option 9 - - - - ILQ615-1X009 - ILQ615-2X007 ILQ615-3X007T(1) ILQ615-4X007 ILQ615-3X009T(1) ILQ615-4X009T(1) VDE 40 to 80 63 to 125 100 to 200 160 to 320 40 to 80 63 to 125 100 to 200 160 to 320 DIP-8 - ILD615-2X001 - ILD615-4X001 - - - - DIP-8, 400 mil, option 6 - ILD615-2X016 ILD615-3X016 ILD615-4X016 - - - - SMD-8, option 7 - - ILD615-3X017T(1) - - - - - DIP-16 - - - - - - ILQ615-3X001 ILQ615-4X001 DIP-16, 400 mil, option 6 - - - - - - ILQ615-3X016 - SMD-16, option 7 - - - - - ILQ615-2X017 - - Notes * Also available in tubes; do not add T to end. * Additional options may be possible, please contact sales office. ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA Surge current IFSM 1.5 A Power dissipation Pdiss 100 mW 1.33 mW/C V Derate linearly from 25 C OUTPUT Collector emitter breakdown voltage BVCEO 70 Emitter collector breakdown voltage BVECO 7 V IC 50 mA IC 100 mA Pdiss 150 mW 2 mW/C Collector current Power dissipation t < 1 ms Derate linearly from 25 C www.vishay.com 2 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83652 Rev. 1.6, 04-Mar-11 ILD615, ILQ615 Optocoupler, Phototransistor Output Vishay Semiconductors (Dual, Quad Channel) ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT Storage temperature Tstg - 55 to + 150 C Operating temperature Tamb - 55 to + 100 C Junction temperature Tj 100 C Tsld 260 C Package power dissipation ILD615 400 mW Derate linearly from 25 C 5.33 mW/C Package power dissipation ILQ615 500 mW COUPLER Soldering temperature (1) 2 mm distance from case bottom Derate linearly from 25 C Isolation test voltage t=1s Isolation voltage Total power dissipation 6.67 mW/C VISO 5300 VRMS VIORM 890 VP Ptot 250 mW Creepage distance 7 mm Clearance distance 7 mm Isolation resistance VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTCS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. 1.3 UNIT INPUT Forward voltage IF = 10 mA VF 1 1.15 Breakdown voltage IR = 10 A VBR 6 30 VR = 6 V IR Reverse current Capacitance VR = 0 V, f = 1 MHz 0.01 V V 10 A CO 25 pF RTHJL 750 K/W VCE = 5 V, f = 1 MHz CCE 6.8 VCE = 10 V ICEO 2 50 nA 5 100 nA Thermal resistance, junction to lead OUTPUT Collector emitter capacitance Collector emitter leakage current, -1, -2 Collector emitter leakage current, -3, -4 pF VCE = 10 V ICEO Collector emitter breakdown voltage ICE = 0.5 mA BVCEO 70 V Emitter collector breakdown voltage IE = 0.1 mA BVECO 7 V Thermal resistance, junction to lead RTHJL 500 K/W PACKAGE TRANSFER CHARACTERISTICS Channel/channel CTR match IF = 10 mA, VCE = 5 V CTRX/CTRY VIO = 0 V, f = 1 MHz CIO VIO = 500 V, TA = 25 C RS 1 to 1 2 to 1 COUPLER Capacitance (input to output) Insulation resistance Channel to channel isolation 0.8 1012 500 1014 pF VAC Note * Minimum and maximum values are tested requierements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Document Number: 83652 Rev. 1.6, 04-Mar-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 3 ILD615, ILQ615 Vishay Semiconductors Optocoupler, Phototransistor Output (Dual, Quad Channel) CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL ILD615-1 ILQ615-1 ILD615-2 Current transfer ratio (collector emitter saturated) IF = 10 mA, VCE = 0.4 V ILQ615-2 ILD615-3 ILQ615-3 ILD615-4 ILQ615-4 UNIT % CTRCEsat 40 % CTRCEsat 60 % CTRCEsat 100 % ILD615-2 ILQ615-2 ILD615-3 ILQ615-3 ILD615-4 ILQ615-4 ILD615-1 ILQ615-1 ILD615-2 IF = 10 mA, VCE = 5 V MAX. 25 ILD615-1 Current transfer ratio (collector emitter) TYP. CTRCEsat ILQ615-1 IF = 1 mA, VCE = 5 V MIN. ILQ615-2 ILD615-3 ILQ615-3 ILD615-4 ILQ615-4 CTRCE 13 30 % CTRCE 22 45 % CTRCE 34 70 % CTRCE 56 90 % CTRCE 40 60 80 % CTRCE 63 80 125 % CTRCE 100 150 200 % CTRCE 160 200 320 % SAFETY AND INSULATION RATED PARAMETERS PARAMETER TEST CONDITION SYMBOL MIN. Partial discharge test voltage routine test 100 %, ttest = 1 s Vpd 1.669 kV Partial discharge test voltage lot test (sample test) tTr = 60 s, ttest = 10 s, (see figure 2) VIOTM 10 kV Vpd 1.424 kV VIO = 500 V RIO 1012 RIO 1011 RIO 109 Insulation resistance Forward current Power dissipation Rated impulse voltage Safety temperature VIO = 500 V, Tamb = 100 C VIO = 500 V, Tamb 175 C (construction test only) TYP. MAX. UNIT ISI 275 mA PSO 400 mW VIOTM 10 kV TSI 175 C Note * According to DIN EN 60747-5-2 (see figure 2). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. www.vishay.com 4 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83652 Rev. 1.6, 04-Mar-11 ILD615, ILQ615 Optocoupler, Phototransistor Output Vishay Semiconductors (Dual, Quad Channel) VIOTM 450 t1, t2 t3 , t4 ttest tstres 400 Phototransistor PSO (mW) 350 300 250 VPd 200 VIOWM VIORM 150 = 1 to 10 s =1s = 10 s = 12 s IR-Diode ISI (mA) 100 50 0 0 0 25 50 75 100 125 150 175 Tamb - Ambient Temperature (C) Fig. 1 - Derating Diagram 13930 t3 ttest t4 t1 tTr = 60 s t2 t stres t Fig. 2 - Test Pulse Diagram for Sample Test according to DIN EN 60747-5-2 (VDE0884); IEC60747-5-5 SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED Current VCC = 5 V, RL = 75 , 50 % of VPP IF 10 mA Turn-on time VCC = 5 V, RL = 75 , 50 % of VPP ton 3 s Rise time VCC = 5 V, RL = 75 , 50 % of VPP tr 2 s Turn-off time VCC = 5 V, RL = 75 , 50 % of VPP toff 2.3 s Fall time VCC = 5 V, RL = 75 , 50 % of VPP tf 2 s Propagation H to L VCC = 5 V, RL = 75 , 50 % of VPP tPHL 1.1 s Propagation L to H VCC = 5 V, RL = 75 , 50 % of VPP tPLH 2.5 s IF 20 mA IF 10 mA IF 10 mA IF 5 mA ton 3 s ton 4.3 s ton 4.3 s ton 6 s SATURATED ILD615-1 ILQ615-1 ILD615-2 Current VCC = 5 V, RL = 1 k, VTH = 1.5 V ILQ615-2 ILD615-3 ILQ615-3 ILD615-4 ILQ615-4 ILD615-1 ILQ615-1 ILD615-2 Turn-on time VCC = 5 V, RL = 1 k, VTH = 1.5 V ILQ615-2 ILD615-3 ILQ615-3 ILD615-4 ILQ615-4 Document Number: 83652 Rev. 1.6, 04-Mar-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 5 ILD615, ILQ615 Vishay Semiconductors Optocoupler, Phototransistor Output (Dual, Quad Channel) SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT SATURATED ILD615-1 ILQ1615-1 ILD615-2 VCC = 5 V, RL = 1 k, VTH = 1.5 V Rise time ILQ615-2 ILD615-3 ILQ615-3 ILD615-4 ILQ615-4 ILD615-1 ILQ615-1 ILD615-2 VCC = 5 V, RL = 1 k, VTH = 1.5 V Turn-off time ILQ615-2 ILD615-3 ILQ615-3 ILD615-4 ILQ615-4 ILD615-1 ILQ615-1 ILD615-2 VCC = 5 V, RL = 1 k, VTH = 1.5 V Fall time ILQ615-2 ILD615-3 ILQ615-3 ILD615-4 ILQ615-4 ILD615-1 ILQ615-1 ILD615-2 VCC = 5 V, RL = 1 k, VTH = 1.5 V Propagation H to L ILQ615-2 ILD615-3 ILQ615-3 ILD615-4 ILQ615-4 ILD615-1 ILQ615-1 ILD615-2 VCC = 5 V, RL = 1 k, VTH = 1.5 V Propagation L to H ILQ615-2 ILD615-3 ILQ615-3 ILD615-4 ILQ615-4 tr 2 s tr 2.8 s tr 2.8 s tr 4.6 s toff 18 s toff 25 s toff 25 s toff 25 s tf 11 s tf 14 s tf 14 s tf 15 s tPHL 1.6 s tPHL 2.6 s tPHL 2.6 s tPHL 5.4 s tPLH 8.6 s tPLH 7.2 s tPLH 7.2 s tPLH 7.4 s COMMON MODE TRANSIENT IMMUNITY (Tamb = 25 C, unless otherwise specified) TEST CONDITION SYMBOL Common mode rejection output high PARAMETER VCM = 50 VP-P, RL = 1 k, IF = 0 mA CMH 5000 V/s Common mode rejection output low VCM = 50 VP-P, RL = 1 k, IF = 0 mA CML 5000 V/s CCM 0.01 pF Common mode coupling capacitance www.vishay.com 6 MIN. For technical questions, contact: optocoupleranswers@vishay.com TYP. MAX. UNIT Document Number: 83652 Rev. 1.6, 04-Mar-11 ILD615, ILQ615 Optocoupler, Phototransistor Output Vishay Semiconductors (Dual, Quad Channel) TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) IF VCC = 5 V I F = 10 mA tD VO tR VO t PLH RL = 75 f = 10 kHz, DF = 50 % V TH = 1.5 V tF tS t PHL iild615_04 iild615_01 Fig. 6 - Saturated Switching Timing Fig. 3 - Non-Saturated Switching Timing VCC = 5 V f = 10 kHz, DF = 50 % RL VO PLED - LED Power (mW) 200 150 100 50 0 - 60 - 40 - 20 iild615_02 0 20 40 60 80 100 Tamb - Ambient Temperature (C) Fig. 7 - Maximum LED Power Dissipation Fig. 4 - Saturated Switching Timing IF 1.4 1.3 t PLH VO t PLH tS 50 % tD iild615_03 tF tR t on t off Fig. 5 - Non-Saturated Switching Timing Document Number: 83652 Rev. 1.6, 04-Mar-11 VF - Forward Voltage (V) Tamb = - 55 C 1.2 Tamb = 25 C 1.1 1.0 0.9 Tamb = 85 C 0.8 0.7 0.1 iild615_07 1 10 100 IF - Forward Current (mA) Fig. 8 - Forward Voltage vs. Forward Current For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 7 ILD615, ILQ615 Vishay Semiconductors Optocoupler, Phototransistor Output (Dual, Quad Channel) 10 000 2.0 CTRNF - Normalized CTR Factor If(pk) - Peak LED Current (mA) Duty Factor 0.005 0.01 1000 0.02 0.05 0.1 0.2 0.5 100 t DF = /t 10 10-6 10-5 10-4 iild615_08 t - LED Pulse Duration (s) NCTRce 1.0 NCTRce(sat) 0.5 TA = 25 C 1 10 100 IF - LED Current (mA) Fig. 12 - Normalization Factor for Non-Saturated and Saturated CTR vs. IF 2.0 CTRNF - Normalized CTR Factor PDET - Detector Power (mW) CTRce(sat) Vce = 0.4 V iild615_11 200 150 100 50 0 - 60 - 40 - 20 Normalized to: VCE = 10 V, IF = 5 mA 1.5 CTRce(sat) VCE = 0.4 V NCTRce 1.0 NCTRce(sat) 0.5 TA = 50 C 0.0 0 20 40 60 0.1 80 100 Tamb - Ambient Temperature (C) iild615_12 Fig. 10 - Maximum Detector Power Dissipation 1 10 100 IF - LED Current (mA) Fig. 13 - Normalization Factor for Non-Saturated and Saturated CTR vs. IF 2.0 Rth = 500 C/W 100 10 25 C 50 C 75 C 1 90 C 0.1 0.1 iild615_10 10 100 1 VCE - Collector Emitter Voltage (V) Fig. 11 - Maximum Collector Current vs. Collector Voltage www.vishay.com 8 CTRNF - Normalized CTR Factor 1000 I CE - Collector Current (mA) Vce = 10 V, IF = 5 mA, 1.5 0.0 0.1 10-3 10-2 10-1 100 101 Fig. 9 - Peak LED Current vs. Pulse Duration, iild615_09 Normalized to: Normalized to: VCE = 10 V, IF = 5 mA CTRce(sat) VCE = 0.4 V 1.5 NCTRce 1.0 NCTRce(sat) 0.5 TA = 70 C 0.0 0.1 iild615_13 1 10 100 IF - LED Current (mA) Fig. 14 - Normalization Factor for Non-Saturated and Saturated CTR vs. IF For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83652 Rev. 1.6, 04-Mar-11 ILD615, ILQ615 Optocoupler, Phototransistor Output Vishay Semiconductors (Dual, Quad Channel) 0.5 NCTRce(sat) TA = 100 C tpLH 2.5 2.0 10 tpHL 0.0 1 0.1 1 iild615_14 10 0.1 100 iild615_17 IF - LED Current (mA) Fig. 15 - Normalization Factor for Non-Saturated and Saturated CTR vs. IF 1 1.5 1.0 100 10 RL - Load Resistor (k) Fig. 18 - -1, Propagation Delay vs. Collector Load Resistor 2.5 30 25 50 C 20 15 25 C 70 C 85 C 10 5 t pLH - Propagation Low-High(s) 1000 35 ICE - Collector Current (mA) 3.0 100 0 IF = 10 mA VCC = 5 V, Vth = 1.5 V 2.0 100 tpLH 10 10 20 30 40 50 IF - LED Current (mA) iild615_15 0.1 60 iild615_18 Fig. 16 - Collector Emitter Current vs. Temperature and LED Current 1.0 100 tpLH - Propagation Low - High (s) 102 Vce = 10 V 101 Typical 100 10- 1 iild615_16 10 RL - Collector Load Resistor (k) 1000 103 10- 2 - 20 1 Fig. 19 - -2, -3, Propagation Delay vs. Collector Load Resistor 105 104 0 20 40 60 80 100 Tamb- Ambient Temperature (C) Fig. 17 - Collector Emitter Leakage vs. Temperature Document Number: 83652 Rev. 1.6, 04-Mar-11 1.5 tpHL 1 0 tpHL - Propagation High-Low (s) NCTRce 3.5 tpHL - Propagation High-Low (s) 1.0 IF = 10 mA VCC = 5 V, Vth = 1.5 V 2.5 IF = 10 mA VCC = 5 V, Vth = 1.5 V 2.0 100 tpLH 10 1.5 tpHL 1 0.1 iild615_19 1.0 1 10 100 RL - Collector Load Resistor (k) tpHL - Propagation Low - High (s) 1.5 ICEO - Collector Emittet (nA) 4.0 1000 Normalized to: VCE = 10 V, IF = 5 mA CTRce(sat) VCE = 0.4 V tpLH - Propagation Low-High (s) CTRNF - Normalized CTR Factor 2.0 Fig. 20 - -4, Propagation Delay vs. Collector Load Resistor For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 9 ILD615, ILQ615 Vishay Semiconductors Optocoupler, Phototransistor Output (Dual, Quad Channel) PACKAGE DIMENSIONS in millimeters Pin one ID 4 3 2 1 5 6 7 8 6.645 0.165 ISO method A 9.77 0.14 0.95 0.19 7.62 typ. 0.79 4 typ. 3.555 0.255 6.095 0.255 1.27 10 3.045 0.255 0.70 0.19 3 to 9 0.51 0.05 2.54 typ. 0.25 0.05 i178006 Pin one ID 8 7 6 5 4 3 2 1 6.48 6.81 9 10 11 12 13 14 15 16 ISO method A 19.77 20.07 0.76 1.14 0.79 7.62 typ. 3.30 3.81 4 0.46 0.56 0.51 0.89 2.54 typ. 1.27 10 typ. 3 to 9 2.79 3.30 5.84 6.35 0.20 0.30 i178007 www.vishay.com 10 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 83652 Rev. 1.6, 04-Mar-11 ILD615, ILQ615 Optocoupler, Phototransistor Output Vishay Semiconductors (Dual, Quad Channel) Option 6 Option 7 Option 9 7.62 typ. 7.62 typ. 10.3 max. 7.62 typ. 3.5 0.3 0.7 min. 4.3 0.3 0.1 0.1 3.6 0.3 0.1 min. 8 min. 2.55 0.25 0.6 min. 10.3 max. 0.6 min. 8 min. 10.16 typ. 0.76 0.76 20802-22 R 0.25 2.54 R 0.25 2.54 1.78 8 min. 11.05 1.78 1.52 8 min. 11.05 1.52 0.76 R 0.25 2.54 0.76 R 0.25 2.54 1.78 8 min. 11.05 1.52 1.78 8 min. 11.05 1.52 PACKAGE MARKING ILD615 V YWW H 68 21764-88 Notes * Only options 1 and 7 reflected in the package marking. * The VDE Logo is only marked on option1 parts. * Tape and reel suffix (T) is not part of the package marking. Document Number: 83652 Rev. 1.6, 04-Mar-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: ILD615-1 ILD615-2 ILD615-3 ILD615-4 ILQ615-1 ILQ615-2 ILQ615-3 ILQ615-4 ILD615-1X007 ILD615-2X009 ILD615-2X016 ILD615-3X009T ILD615-3X017 ILD615-4X006 ILD615-4X009T ILQ615-1X009 ILQ615-2X007 ILQ615-2X017 ILQ615-3X001 ILQ615-3X007 ILQ615-3X007T ILQ615-3X009 ILQ615-3X016 ILQ615-4X001 ILQ615-4X007 ILQ615-4X009 ILQ615-4X009T ILD615-3X017T ILD615-1X009 ILD615-2X009T ILD615-4X009 ILD615-4X001 ILD615-4X016 ILD615-2X001 ILD615-3X016 ILQ615-3X009T ILD615-1X007T