Alle Rechte vorbehalten/ Ald rights reserved 1 | 2 3 4 5 6 Maxi. 32,3 Panel cutting 25,2 25,2 A 3 M2,5 _ 3] 18,4 20,1 > 1g 0.1 = a ? Elo ) a / \ so] Ge - { _ Axis X \ os S | - rc _ _ -4 =| 4 $ at =| ry | CROSS SECTION A-A 15.7 max. | =~ in| oO in eo =: eT a A <n { z Is sy vox 18 | = | 13.240,2 | { Le : | after screwing 3.6 Ln max. RI / | [A} ~ HEC 0603-7 | | | < modular jac | ( J | | | ; ( WAzzz7, | | ay 7 | : . . 1 | <td \ | flat seal Recommended | eh - -2 washer Connector pitchs on panel: Recommended according fo Axis X- 27mm and Axis Y = 21m | titan fot | eceptacle mating face acc. to 600076-3-106 IEC - variant 4 | 4 \ NO AIR GAP RJ45 jack mat ing references A and B | 14. 13 20,15 according to [EC 606037 PCB _ ONLY VALID IF_NO AIR GAP (1) Screwing torque = 0.3 N.m | BETWEEN RJ45 VERTICAL JACK panel | | 09 45 551 1103 AND f L_ ~] L STOP AREA OF HOUSING J Pp Area for Harting jacks Dat. Name Push pull RJ Industrial black thermoplastic Mafsteh/ Detail. |28/10/08] AB IP6? receptacle with overmolded seal M2.5 screw (1) Insp. ALL Din. in am wit Pos fon dimensions A aceon to Stend, Orig. Size DIN A 4 or P/N 09-45 554 1103 1,5:1 or ISO 4762 35413 |17/11/08] AB Blatt/ Page ane! 35400 |26/10/08| ab) HARTING EURL TB 09 45 545 00 2? P F-95972 Paris 1 Mod, Dat. Nome Sub.