DC/DC Converters TEN 25WI Series, 25/30 Watt Features Ultra wide 4:1 input voltage range Adjustable output voltage Remote On/Off Continuous short circuit protection Over voltage protection Over temperature protection I/O isolation 1500 VDC Input filter meets EN 55032, class A and UL 60950-1 FCC, level A without external components Fully RoHS compliant 3-year product warranty The TEN 25WI series is a family of high performance dc-dc converter modules up to 30 Watt featuring ultra wide 4:1 input voltage ranges in a compact low profile case with industry standard footprint. Standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout, over temperature and short circuit protection. An other features is the internal EMI-filter to meet EN 55032, class A. Typical applications for these converter modules are industrial electronics, communication systems, battery operated equipment and distributed power systems. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 25-2410WI 3.3 VDC 5'500 mA 82 % TEN 25-2411WI 5 VDC 5`000 mA 85 % TEN 25-2412WI 10 - 40 VDC 12 VDC 2`500 mA 89 % TEN 25-2413WI (24 VDC nominal) 15 VDC 2`000 mA 89 % TEN 25-2422WI 12 VDC 1`250 mA 89 % TEN 25-2423WI 15 VDC 1`000 mA 89 % TEN 25-4810WI 3,3 VDC 5'500 mA 82 % TEN 25-4811WI 5 VDC 5`000 mA 85 % TEN 25-4812WI 18 - 75 VDC 12 VDC 2`500 mA 89 % TEN 25-4813WI (48 VDC nominal) 15 VDC 2`000 mA 89 % TEN 25-4822WI 12 VDC 1`250 mA 89 % TEN 25-4823WI 15 VDC 1`000 mA 89 % http://www.tracopower.com Page 1 of 4 DC/DC Converters TEN 25WI Series, 25/30W Input Specifications Input current no load 24 V models: 20 mA max. 48 V models: 10 mA max. Input current full load 24 V; 3.3 VDC 24 V; 5.0 VDC 24 V; other output 48 V; 3.3 VDC 48 V; 5.0 VDC 48 V; other output Surge voltage (100 ms max.) models: models: models: models: models: models: 920 mA typ. 1220 mA typ. 1400 mA typ. 460 mA typ. 610 mA typ. 700 mA typ. 24 V models: 50 V max. 48 V models: 100 V max. Reverse polarity 2 A max. Reflected input ripple current 24 V models: 50 mA typ. 48 V models: 25 mA typ. Conducted noise (input) EN 55032 level A, FCC part 15, level A Start-up voltage / under voltage shut down 24 V models: 9.7 VDC / 9.3 VDC typ. 48 V models: 17.5 VDC / 16.5 VDC typ. Output Specifications Voltage set accuracy 1 % Output voltage adj. range 10 % with external resistor (see page 4) Regulation - Input variation Vin min. to Vin max. 0.5 % max. - Load variation 10 - 100 % single output models: 1.0 % max. dual output models balanced load: 2.0 % max. Minimum load 10 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Temperature coefficient 0.02 %/C max. Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max. Transient response (25 % load step change) 150 s typ. Output current limitation >120 % of Iout max. Short circuit protection indefinite, automatic recovery Thermal shutdown at 115C typ. Capacitive load 3.3 & 5 VDC models: 10'000 F 12 &15 VDC models: 1'000 F dual output models: 330 F General Specifications Temperature ranges - Operating -40C to +85C (with derating) - Casing +105C max. - Storage -50C to +125C Load derating - without heatsink 2 %/K above 55C - with heatsink 2.5 %/K above 65C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >550'000 h Isolation voltage (60 s) - Input/Output 1`500 VDC Isolation capacitance - Input/Output (100 kHz, 1 V) 1200 pF typ. Isolation resistance - Input/Output (500 VDC) >1'000 MOhm Switching frequency (fixed) 330 kHz typ. (puls width modulation) http://www.tracopower.com Page 2 of 4 DC/DC Converters TEN 25WI Series, 25/30W General Specifications Remote On/Off: - On: 2.5 to 100 VDC or open circuit. - Off: -1.0 to +1.0 VDC or short circuit pin 3 and 2 - Standby current: 5 mA max. Safety standards UL/cUL 60950-1, IEC/EN 60950-1 Safety approvals - UL/cUL www.ul.com -> certifications -> File e188913 Physical Specifications Casing material copper, nickel plated Baseplate non conductive FR4 Potting material silicon (UL 94 V-0 rated) Weight 56 g (1.98 oz) Soldering temperature 265C / 10 s max. Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU Output Voltage Adjustments Trim down +Vout +Vout Trim up Trim Rx Trim 10K Pot. -Vout Rx = Rx Trim -Vout 36.667 x Vo -- 33 x Vn Vn -- Vo Rx = 33 x Vn -- 30 x Vo Vo -- Vn Vo = adjusted output voltage [VDC] Vn = nominal output voltage [VDC] Rx = trim resistor [Kohm] Nominal output voltage at open Trim input. Application note: www.tracopower.com/overview/ten25wi All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TEN 25WI Series, 25/30W (0.4) 45.72 2.5 (1.8) (0.1) 6 10.2 50.8 (0.24) (0.40) (2.0) (0.5) (0.2) 4 12.7 5 2 1 5.08 (0.4) Bottom view Pin-Out 10.16 (0.4) 3 6 (0.4) 10.16 10.16 10.16 5.1 7 (0.2) (1.6) 40.6 Outline Dimensions Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) 3 Remote On/Off 4 No pin + Vout 5 + Vout Common 6 -Vout 7 -Vout Trim Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.02 0.002) Pin pitch tolerances: 0.35 (0.014) Case tolerances: 0.5 (0.02) *Optional versions: * without remote and trim pins add suffix -B (e.g.TEN 25-2412WI-B) * without remote pin add suffix -B1 (e.g. TEN 25-2413WI-B1) * without trim pin add suffix -B2 (e.g. TEN-25-4811WI-B2) Heat-Sink (Option) Heat-sink TEN-HS5 (optional) 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter Order code: TEN-HS5 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 15 g (0.53oz) (without converter) 23.0 (0.9) 17.2 (0.68) max. Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heat-sinks already mounted. Please contact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. March 14. 2018 Page 4 of 4