Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC340ALP5 / 340ALP5E v00.0710 Mixers - SINGLE & DOUBLE BALANCED - SMT 10 GaAs MMIC SMT Double-Balanced DUAL Mixer, 1.7 - 4.5 GHz Typical Applications Features The HMC340ALP5 / HMC340ALP5E Dual Mixer is ideal for: Conversion Loss: 8.0 dB * Wireless Infrastructure LO/IF Isolation: 33 dB * Wireless Local Loop Input IP3: +20 dBm * Image Reject Mixer Conversion Gain Balance: 0.1 dB * I/Q Modulator 32 Lead 5x5mm SMT Package: 25mm2 LO/RF Isolation: 45 dB * SSB Modulator Functional Diagram General Description The HMC340ALP5(E) is a double balanced dual mixer covering 1.7 - 4.5 GHz RF/LO range. This passive MMIC mixer is constructed of GaAs Schottky diodes and on-chip baluns. The device can be used as an upconverter, downconverter, bi-phase (de)modulator, or phase comparator. The mixer symmetry of the HMC340ALP5(E) make it ideal for combining with external hybrids to implement a single sideband upconverter or image reject downconverter assembly. The consistent MMIC performance will improve system operation and assure regulatory compliance. A RoHS compliant, leadless 5x5 mm QFN surface mount package (LP5) houses the dual MMIC mixer IC. Electrical Specifications, TA = +25 C, As a Function of LO Drive LO = +13 dBm IF = 100 MHz Parameter Min. Typ. Max. Min. Units Typ. Max. Frequency Range, RF & LO 1.7 - 4.5 3.4 - 3.8 GHz Frequency Range, IF DC - 1.5 DC - 1.5 GHz Conversion Loss Conversion Gain Amplitude Balance Noise Figure (SSB) 8 10 8 10 dB 0.10 0.25 0.10 0.25 dB 8 10 8 10 dB LO to RF Isolation 30 45 40 47 LO to IF Isolation 25 33 33 dB 38 dB IP3 (Input) 20 23 dBm 1 dB Gain Compression (Input) 12 13 dBm * Unless otherwise noted, all measurements performed as single channel downconverter. 10 - 1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-Balanced DUAL Mixer, 1.7 - 4.5 GHz Single Channel: Conversion Gain vs. Temperature @ LO = +13 dBm Single Channel: Isolation @ LO = +13 dBm 0 RF TO IF LO TO RF LO TO IF -15 -10 +25 C +85 C - 40 C -15 -45 -20 -60 1 1.5 2 2.5 3 3.5 4 4.5 5 1 1.5 2 RF FREQUENCY (GHz) 2.5 3 3.5 4 4.5 5 4 4.5 5 4.5 5 FREQUENCY (GHz) Single Channel: Conversion Gain vs. LO Drive Single Channel: Return Loss @ LO = +13 dBm 0 0 LO= +9 dBm LO= +11 dBm LO= +13 dBm LO= +15 dBm -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 10 -30 -10 -15 -5 -10 LO RF -15 -20 -20 1 1.5 2 2.5 3 3.5 4 4.5 1 5 1.5 2 2.5 3 3.5 FREQUENCY (GHz) RF FREQUENCY (GHz) Single Channel: Input P1dB vs. Temperature @ LO = +13 dBm Single Channel: IF Bandwidth @ LO = +13 dBm 15 0 14 13 P1dB (dBm) RESPONSE (dB) -5 -10 11 10 RETURN LOSS CONVERSION GAIN -15 12 Mixers - SINGLE & DOUBLE BALANCED - SMT -5 ISOLATION (dB) CONVERSION GAIN (dB) 0 +25 C +85 C - 40 C 9 8 -20 0 0.5 1 IF FREQUENCY (GHz) 1.5 2 1 1.5 2 2.5 3 3.5 4 RF FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-Balanced DUAL Mixer, 1.7 - 4.5 GHz Single Channel: Input IP3 vs. Temperature @ LO = +13 dBm 30 25 25 IP3 (dBm) 30 20 LO= +11 dBm LO= +13 dBm LO= +15 dBm 15 10 1.5 2 2.5 3 3.5 +25C +85C -40C 15 4 4.5 10 1.5 5 2 3 3.5 4.5 5 60 65 LO= +11 dBm LO= +13 dBm LO= +15 dBm 60 55 50 IP2 (dBm) 55 50 45 45 +25C +85C -40C 40 40 35 35 30 1.5 4 Single Channel: Input IP2 vs. Temperature @ LO = +13 dBm 70 IP2 (dBm) 2.5 RF FREQUENCY (GHz) Single Channel: Input IP2 vs. LO Drive 2 2.5 3 3.5 4 4.5 30 1.5 5 2 RF FREQUENCY (GHz) 2.5 3 3.5 4 4.5 5 4.5 5 RF FREQUENCY (GHz) Single Channel: Upconverter Conversion Gain vs. LO Drive Single Channel: Upconverter IP3 vs. LO Drive 30 0 25 IP3 (dBm) -5 -10 LO= +9 dBm LO= +11 dBm LO= +13 dBm LO= +15 dBm -15 -20 1.5 2 2.5 3 3.5 RF FREQUENCY (GHz) 10 - 3 20 RF FREQUENCY (GHz) CONVERSION GAIN (dB) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 IP3 (dBm) Single Channel: Input IP3 vs. LO Drive 4 20 15 LO= +11 dBm LO= +13 dBm LO= +15 dBm 10 4.5 5 5 1.5 2 2.5 3 3.5 4 RF FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-Balanced DUAL Mixer, 1.7 - 4.5 GHz Dual Channel: Channel to Channel Isolation -70 0.5 -80 0 RF1 TO IF2 RF2 TO IF1 -100 -0.5 -1 1 2 3 4 5 -110 1.5 2 2.5 FREQUENCY (GHz) 3.5 4 4.5 5 4.5 5 Dual Channel: RF1 to RF2 Isolation -20 -20 -30 -30 ISOLATION (dB) ISOLATION (dB) 3 RF FREQUENCY (GHz) Dual Channel: LO1 to LO2 Isolation -40 -50 -60 -40 -50 -60 -70 1.5 2 2.5 3 3.5 4 4.5 5 -70 1.5 2 LO FREQUENCY (GHz) 2.5 3 LO Freq. (GHz) 1.5 -40 -60 -80 -100 0.5 4 Harmonics of LO -20 0 3.5 RF FREQUENCY (GHz) Dual Channel: IF1 to IF2 Isolation ISOLATION (dB) 10 -90 1 IF FREQUENCY (GHz) 1.5 2 nLO Spur at RF Port 1 2 3 4 39 29 57 68 2.0 40 26 63 68 2.5 43 28 41 63 3.0 44 38 63 67 3.5 44 48 66 70 4.0 42 49 63 67 4.5 38 49 63 83 5.0 36 53 59 89 Mixers - SINGLE & DOUBLE BALANCED - SMT 1 ISOLATION (dB) AMPLITUDE BALANCE (dB) Dual Channel: Conversion Gain Amplitude Balance LO = +13 dBm Values in dBc below input LO level measured at RF Port. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 4 HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-Balanced DUAL Mixer, 1.7 - 4.5 GHz Absolute Maximum Ratings Mixers - SINGLE & DOUBLE BALANCED - SMT 10 RF / IF Input +13 dBm LO Drive +27 dBm Channel Temperature 150C Continuous Pdiss (T = 85C) (derate 16.55 mW/C above 85C) 1.07 W Thermal Resistance (RTH) (junction to package base) 60.4 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 deg C MxN Spurious Outputs nLO mRF 0 1 2 3 4 0 xx 11 20 36 45 1 19 0 26 37 41 2 71 67 67 68 71 3 86 86 85 78 78 4 86 86 86 86 86 RF = 3.5 GHz @ -10 dBm LO = 3.6 GHz @ +13 dBm All values in dBc below IF power level ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED Package Information LAND PATTERN. Part Number Package Body Material Lead Finish MSL Rating HMC340ALP5 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC340ALP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] H340A XXXX H340A XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 10 - 5 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-Balanced DUAL Mixer, 1.7 - 4.5 GHz Pin Descriptions Function Description N/C No Connection. These pins may be connected to RF ground without affecting performance. 3, 6 LO1, LO2 LO Port: This pin is DC coupled and matched to 50 Ohms. 12, 29 IF2, IF1 IF Port: This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose values has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result. 19, 22 RF2, RF1 RF Port: This pin is DC coupled and matched to 50 Ohms. Package Bottom GND Package bottom must be connect to RF/DC ground. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 Mixers - SINGLE & DOUBLE BALANCED - SMT Pin Number 1, 2, 4, 5, 7-11, 13-18, 20, 21, 23-28, 30-32 10 - 6 HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-Balanced DUAL Mixer, 1.7 - 4.5 GHz Application Circuit for use as an I/Q Modulator Mixers - SINGLE & DOUBLE BALANCED - SMT 10 10 - 7 Application Circuit for use as an IRM Mixer For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC340ALP5 / 340ALP5E v00.0710 GaAs MMIC SMT Double-Balanced DUAL Mixer, 1.7 - 4.5 GHz Evaluation PCB List of Materials for Evaluation PCB 107482 Item Description J1 - J6 PCB Mount SMA RF Connector U1 HMC340ALP5(E) Dual Mixer PCB [2] 107467 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - SINGLE & DOUBLE BALANCED - SMT 10 10 - 8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC340ALP5ETR HMC340ALP5E 107482-HMC340ALP5