POWER RELAY 1 POLE--16 A (CADMIUM FREE CONTACTS TYPE) VH SERIES FEATURES NO UL, CSA recognized TV-10 rated 1 Form A (SPST-NO) contact Heavy duty 16 A small power relay with tab-terminals (#250) High inrush current and high surge voltage --Inrush Current 55 A --Surge Strength 7,000 V Small package meets high density mounting requirement Environmentally friendly cadmium free contact type is available TF DE ORDERING INFORMATION VH - 12 (a) (*) (b) [Example] OR NE GN W S SI (a) Series Name VH : VH Series (b) Nominal Voltage Refer to the COIL DATA CHART Actual marking omits the hyphen (-) of (*) SAFETY STANDARD AND FILE NUMBERS UL508, 873 (File No. E56140,E108658) C22.2 No. 1, No. 14 (File No. LR35579) Please note that UL/CSA rating may differ from the standard rating. Please request when the approval markings are required on the cover. Type VH Nominal voltage 5 to 60 VDC Contact rating TV-10 120 VAC 1 HP 125 VAC/250 VAC 16 A 125 VAC resistive Pilot duty A 150 1 VH SERIES SPECIFICATIONS Item Contact VH Arrangement 1 form A (SPST-NO) Material Silver-alloy Style Single Resistance (initial) Maximum 30 m (at 1 A 6 VDC) Ratings (resistive) 16 A 250 VAC Maximum Carrying Current 20 A NO Maximum Switching Power 4,000 VA Maximum Switching Voltage 380 VAC Maximum Switching Current 16 A Minimum Switching Coil Time Value Insulation Load*1 100 mA 5 VDC TF Nominal Power (at 20C) 0.9 to 1.0 W Operate Power (at 20C) 0.45 to 0.5 W Operating Temperature -30C to +70C (no frost) Operate (at nominal voltage) Maximum 15 ms DE OR Release (at nominal voltage) Maximum 5 ms Resistance (at 500 VDC) Minimum 1,000 M NE GN W S between open contacts 1,000 VAC 1 minute Dielectric Strength between coil and contacts 4,000 VAC 1 minute Surge Strength Life Mechanical Electrical Other Vibration Resistance Shock Resistance Unit Mass *1 SI Misoperation Endurance Misoperation Endurance 7,000 V (at 1.2 x 50 s) 5x 106 operations minimum 2x 105 operations minimum (contact rating) 10 to 55 Hz (double amplitude of 3 mm) 10 to 55 Hz (double amplitude of 3 mm) 200 m/s2 (11 1 ms) 1,000 m/s2 ( 6 1 ms) Approximately 35 g Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. 2 VH SERIES COIL DATA CHART MODEL Nominal voltage VH- 5 5 VDC VH- 6 Must operate voltage Must release voltage Nominal power 28 3.5 VDC 0.25 VDC 0.9 W 6 VDC 40 4.2 VDC 0.3 VDC 0.9 W VH- 9 9 VDC 90 6.3 VDC 0.45 VDC 0.9 W VH-12 12 VDC 160 8.4 VDC 0.6 VDC 0.9 W VH-18 18 VDC 360 12.6 VDC 0.9 VDC 0.9 W VH-24 24 VDC 640 16.8 VDC 1.2 VDC 0.9 W 48 VDC 2,300 33.6 VDC 2.4 VDC 1.0 W 60 VDC 3,600 42.0 VDC 3.0 VDC 1.0 W VH-48 VH-60 NO Coil resistance (10%) Note: All values in the table are measured at 20C TF CHARACTERISTIC DATA DE OR NE GN W S SI 3 VH SERIES REFERENCE DATA NO TF DE DIMENSIONS Dimensions OR NE GN W S SI Schematics (BOTTOM VIEW) PC board mounting hole layout Unit: mm Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 03/2002 4