NOT FOR NEW
DESIGNS
VH SERIES
FEATURES
UL, CSA recognized TV-10 rated
1 Form A (SPST-NO) contact
Heavy duty 16 A small power relay with tab-terminals
(#250)
High inrush current and high surge voltage
—Inrush Current 55 A
—Surge Strength 7,000 V
Small package meets high density mounting requirement
Environmentally friendly cadmium free contact type is
available
ORDERING INFORMATION
VH 12
[Example] (a) (*) (b)
POWER RELAY
1 POLE—16 A (CADMIUM FREE CONTACTS TYPE)
(a) Series Name VH: VH Series
(b) Nominal Voltage Refer to the COIL DATA CHART
Actual marking omits the hyphen (-) of (*)
SAFETY STANDARD AND FILE NUMBERS
UL508, 873 (File No. E56140,E108658)
C22.2 No. 1, No. 14 (File No. LR35579)
Please note that UL/CSA rating may differ from the standard rating.
Please request when the approval markings are required on the cover.
Type Nominal voltage Contact rating
TV-10 120 VAC
VH 5 to 60 VDC 1 HP 125 VAC/250 VAC
16 A 125 VAC resistive
Pilot duty A 150
1
2
VH SERIES
NOT FOR NEW
DESIGNS
SPECIFICATIONS
Item VH
Contact Arrangement 1 form A (SPST-NO)
Material Silver-alloy
Style Single
Resistance (initial) Maximum 30 m (at 1 A 6 VDC)
Ratings (resistive) 16 A 250 VAC
Maximum Carrying Current 20 A
Maximum Switching Power 4,000 VA
Maximum Switching Voltage 380 VAC
Maximum Switching Current 16 A
Minimum Switching Load*1100 mA 5 VDC
Coil Nominal Power (at 20°C) 0.9 to 1.0 W
Operate Power (at 20°C) 0.45 to 0.5 W
Operating Temperature –30°C to +70°C (no frost)
Time Value Operate (at nominal voltage) Maximum 15 ms
Release (at nominal voltage) Maximum 5 ms
Insulation Resistance (at 500 VDC) Minimum 1,000 M
Dielectric between open contacts 1,000 VAC 1 minute
Strength
between coil and contacts 4,000 VAC 1 minute
Surge Strength 7,000 V (at 1.2 × 50 µs)
Life Mechanical 5 × 106 operations minimum
Electrical 2 × 105 operations minimum (contact rating)
Other Vibration Misoperation 10 to 55 Hz (double amplitude of 3 mm)
Resistance Endurance 10 to 55 Hz (double amplitude of 3 mm)
Shock Misoperation 200 m/s2 (11 ±1 ms)
Resistance Endurance 1,000 m/s2 ( 6 ±1 ms)
Unit Mass Approximately 35 g
*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load
before production since reference values may vary according to switching frequencies, environmental conditions and
expected reliability levels.
3
VH SERIES
NOT FOR NEW
DESIGNS
CHARACTERISTIC DATA
Nominal Coil resistance Must operate Must release Nominal
MODEL voltage (±10%) voltage voltage power
VH- 5 5 VDC 28 3.5 VDC 0.25 VDC 0.9 W
VH- 6 6 VDC 40 4.2 VDC 0.3 VDC 0.9 W
VH- 9 9 VDC 90 6.3 VDC 0.45 VDC 0.9 W
VH-12 12 VDC 160 8.4 VDC 0.6 VDC 0.9 W
VH-18 18 VDC 36012.6 VDC 0.9 VDC 0.9 W
VH-24 24 VDC 64016.8 VDC 1.2 VDC 0.9 W
VH-48 48 VDC 2,30033.6 VDC 2.4 VDC 1.0 W
VH-60 60 VDC 3,60042.0 VDC 3.0 VDC 1.0 W
COIL DATA CHART
Note: All values in the table are measured at 20°C
4
VH SERIES
NOT FOR NEW
DESIGNS
REFERENCE DATA
DIMENSIONS
Dimensions Schematics
(BOTTOM VIEW) PC board mounting
hole layout
Unit: mm
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks
of their respective owners. Rev. 03/2002
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices