0.8mm pitch connector Right-angle through hole type female connector for PCB HDRA-E68W( )LFDT1EC-( )+ For PCB Right-angle Through hole ANSI/SFF8441 Configuration of product Part No. HDRA- E 68 W ( ) LFD T1 E C -( )+ Series name Earth lock pin (provided with No. of contacts: 136 (682) board lock mechanism) No. of stacks: 2 Provided with shell connection Length of contact, through hole reinforcement 1: 2.08 (PCB: 1.6 mm thick) Provided with protection cover 2: 3.4 (PCB: 2.4 mm thick) for contacts and bends Type of contact Lock screw LFD: Right-angle through hole type, Blank: None SL : Provided (Thickness of panel: 1.12 mm) female 25 32.35 2.02 1.15 1.2 1.15 5.08 1.15 1.20.03 5.08 1.2 1.15 0.05 0.03 0.03 3.5 1.2 Components Bracket 37.70.1 Contacts -0 34.7 0.1 2.40.08 1.15 5.3 11.84 0.3 2.28 2.02 2.08 5.84 3.46 POS.#68 (CN2) Insulator R 5.840.05 -0 10.720.1 Shell Recommended panel cut-out dimensions Square nuts Lock screw Select the connector according to panel thickness. For the application without panel, use washers or special lock screw (P/N: HDRA-E68LFD-7C). Mating connector: HDRA series IDC type male cable connector, or straddle SMT type male connector SMT 1.15 Recommended PCB layout t=1.6mm or 2.4mm POS.#2 (CN2) POS.#1 (CN2) Through hole 0.05 6-o1.2 (P.T.H.) PAD o2.250.1 Edge of PCB POS.#68 (CN1) 28.3 0.833=26.1 0.40.03 0.80.03 0.833=26.4 0.05 32.350.1 POS.#68 (CN2) 37.7 31.65 POS. #1 (CN1) POS. #2 (CN1) POS.#1(CN2) POS.#2(CN2) 1.15 POS.#1 (CN1) 6.3MAX (Four lock screws are supplied with a connector.) 42.7 PAD o10.1 POS.#67(CN1) POS.#68(CN1) 0.03 5.2 2.250.05 HONDA J A PA N 19.1 18.1 0.03 0.03 0.05 2.78 1.6 136-o0.65 (P.T.H.) 1.60.03 0.833=26.40.05 0.03 0.03 0.03 1.15 0.03 2.02 2.98 Press-in IDC Wire Soldering Crimping wrapping Others Board lock pin Shell connector Protection covers