VWO 140 Three Phase AC Controller Modules IRMS = 3x 143 A VRRM = 1200-1600 V Preliminary data VRSM VDSM VRRM VDRM V V 1200 1400 1600 1200 1400 1600 C1 Type VWO 140-12io1 VWO 140-14io1 VWO 140-16io1 E1 C10 K1 E10 M1 S1 K10 M10 V1 S10 V10 pin configuration see outlines Symbol Conditions IRMS IRMS ITAVM TC = 85C; 50 - 400 Hz (per phase) TC = 85C; 50 - 400 Hz (per phase) for 10 sec. TC = 85C; (180 sine) ITSM TVJ = 45C VR = 0 TVJ = 125C VR = 0 2 It (di/dt)cr Maximum Ratings 101 143 46 A A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1150 1240 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 1040 1120 A A 2 TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 6610 6460 As A2 s TVJ = 125C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 5410 5270 A2s A2 s TVJ=125C repetitive, IT = 45 A f = 50 Hz, tP = 200 s VD = 2/3 VDRM IG = 0.45 A non repetitive, IT = ITAVM diG/dt = 0.45 A/s 150 A/s (dv/dt)cr TVJ=125C; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) PGM TVJ = 125C IT = ITAVM tp = 30 s tp = 300 s PGAVM 500 A/s 1000 V/s 10 5 W W 0.5 W 10 V TVJ TVJM Tstg -40...+125 150 -40...+125 C C C 3000 3600 V~ V~ VISOL 50/60 Hz, RMS IISOL < 1 mA t = 1 min t=1s Md Mounting torque (M5) Weight typ. * Thyristor controller for AC (circuit W3C acc. to IEC) for mains frequency * Package with DCB base plate * Isolation voltage 3600 V~ * Planar passivated chips * UL applied Applications * Switching and control of three phase AC circuits * Softstart AC motor controller * Solid state switches * Light and temperature control Advantages VRGM for 10 sec. Features * Easy to mount with two screws * Space and weight savings * Improved temperature and power cycling * High power density G 2-2.5 Nm. 18-22 lb.in. 80 g Data according to IEC 60747 refer to a single thyristor unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions. (c) 2008 IXYS All rights reserved 20080828a 1-2 VWO140 140 VWO Symbol Conditions Characteristic Values ID, IR TVJ = 125C; VR = VRRM; VD = VDRM < 5 mA VT IT < 1.5 V VT0 rT For power-loss calculations only 0.85 5.2 V m VGT VD = 6 V; IGT VD = 6 V; VGD IGD TVJ=125C; IL = 140 A; TVJ = 25C 25C -40C 25C -40C < < < < 1.5 1.6 100 200 V V mA mA VD = 2/3 VDRM < < 0.2 5 V mA TVJ = 25C; tP = 10 s IG = 0.45 A; diG/dt = 0.45 A/s < 450 mA IH TVJ = 25C; VD = 6 V; RGK = < 200 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.45 A; diG/dt = 0.45 A/s < 2 s tq TVJ=125C; IT = 20 A, tP = 200 s; di/dt = -10 A/s typ. VR = 100 V; dv/dt = 15 V/s; VD = 2/3 VDRM 150 s RthJC per per per per thyristor; sine 180el module thyristor; sine 180el module 0.6 0.1 0.7 0.117 K/W K/W K/W K/W Creeping distance on surface Creepage distance in air Max. allowable acceleration 12.7 9.4 50 mm mm m/s2 RthJK dS dA a TVJ TVJ TVJ TVJ = = = = Detail Y Dimensions in mm (1 mm = 0.0394") Detail Z M 2:1 O1.5 (DIN 46 431) O 6.1 0.50.2 1.5 +0.6-0.3 6.0 (4) 1.5 O 2.5 M 5:1 Y 4.50.5 O 2.1 Z 0.25 65 93 38 40.4 2 13 17 0.25 G 78.50.3 25.0 0.3 18.0 0.3 3.50.3 4x45 32 0.2 4 5 6 7 1 2 3 4 5 6 7 R A B C D E F G H I K L M N O P R S T U V W R 5.5 15.2 0.3 15.2 0.3 1 2 3 A B C D E F G H I K L M N O P R S T U V W R1 8 9 10 8 9 10 40 0.15 0.5 IXYS reserves the right to change limits, test conditions and dimensions. (c) 2008 IXYS All rights reserved 800.3 Aufdruck der Typenbezeichnung (Klebeetikett) 20080828a 2-2