Series 40-5 Wedge Lok
nVent.com/SCHROFF 1-800-854-7086
SERIES 40-5 WEDGE-LOK DSCC 89064 & CID 59789
RECOMMENDED GAP WIDTH
PCB + 7.62 (.300)
RECOMMENDED TORQUE
80 N-cm (7 in-lbs)
WEIGHT
1.16 g/cm (.104 oz/in)
MATERIALS AND FINISH
WEDGES
Material: Aluminum Alloy
6061-T6 per QQ-A-200/8
Finish: See nish table on
opposite page
SCREW
.09-in. or 2.5-mm hex. socket head
cap screw, depending on mounting
conguration
Material: 300 series stainless steel per
QQ-S-763 ASTM A-582 A286 per FF-S-86
with dry lm lube per MIL-L-46010 for
“TLC” option
Finish: Passivated per AMS2700
ALIGNMENT SPRINGS
Material: 301 stainless steel half hard
per AMS 5518
Finish: Passivated per AMS2700
OPTIONAL LOCK AND FLAT WASHER
Material: 300 series stainless steel
per QQ-S-763 and ASTM A-582
Finish: Passivated per AMS2700
OPTIONAL LOCKNUT
Material: Type A286 stainless steel per
ASTM AMS 5525
Finish: Silver plate per AMS 2410
80 - m in-lb
SERIES 40-5 WEDGE LOK
nVent may modify standard parts without prior notice to or approval from customers. These modications may change product appearance, but will not have a
detrimental effect on form, t or function. ©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its aliates. All other trademarks
are the property of their respective owners. nVent reserves the right to change specications without notice.
T - L
*
[Blank]
B
[Blank]
LN
[Blank]
[Blank]
L
[Blank]
FINISH TABLE
TABLE
,
VI OPTION LF OPTION
Provides addional
LN OPTION
wedge when
L OPTION
Provides addional
and vibraon
RED AREA
EX ED
L ED RED AREA
EALED
L ED
L
A ER
LA
A ER
L
A A LE A EL EX A D
RELAXED
EX A DED
