ACT53T- 4 (TCXO)
ACT53T-4 (TCXO)
Slope Polarity
Linearity
TABLE 1
TABLE 2 STABILITY Vs OPERATING TEMPERATURE
±1.0ppm ±1.5ppm ±2.0ppm ±2.5ppm
Issue 4 B3
Date 11-10-05
See table 1
Positive
10% max
10MHz,12.8MHz,13.0MHz,14.4MHz, 15.36MHz, 19.2MHz, 19.68MHz,
20MHz, 26MHz
-135dBc/Hz max @ 1KHz offset
±1ppm / year max @25°C
SSB Phase Noise (Typical)
Iop Supply Current (max)
Vcont Control Voltage Range
±0.3ppm max for 10% change
±0.3ppm max for 5% change
±1.0ppm T
y
pical
@
25°C ±2.0°C
Vin
Supply Voltage
Temp Storage Range
Initial Calibration Tolerance
Frequency Stability
Vcc
fo
Topr
Tstg
Specification
3.0VDC ±5%
Temp Operating Range
Parameter Symbol
Frequency Range
Specification
See table 2
1.5V ±1.0
±12ppm Typical
2mA max
See table below for available stabilities
Clipped Sine : 0.8V p~p, 10KΩ//10pf Load
vs Operating Temp
Conditions
-40 to +85°C
vs Load Fa Aging
vs Input Voltage
Δf/fo
Δf/fo
Tel : 0044 (0)118 979 1238
Fax : 0044 (0)118 979 1283
email : info@actcrystals.com
ACT53VT- 4 (VCTCXO)
2ms max Start-up Time Tosc
Please specify
Please specify
Please specify
Please specify
Frequency Tuning Range N/CL Output Load
-30~75
VCTCXO Only ( VT53 )
VCTCXO Only ( VT53 )
VCTCXO Only ( VT53 )
VCTCXO Only ( VT53 )
±3.0ppm
0~50
Deg C
The ACT53VT family is a range of VCTCXOs housed in a ceramic package with a metal lid and is
seam welded for good longer term stability The pads are gold plated and the lid is grounded via the
package to assist with EMI reduction.
Applications include Networking, Ethernet, Audio & Modem Clocks, Set Top Boxes, Phase Locked
Loops, Telecomms, Video Games, WIFI, GPS & many Consumer Applications.
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
(For 13.0Mhz Device)
Please note that all parameters can not necessarily be specified in the same device
Customer to specify : Frequency, Supply Voltage, Frequency Stability, Operating Temperature Range, Output Type & 53T or 53VT
ISO9001:2000 Registered
-10~60
-20~70
53L is low height option - available
to custom order.
Pad surface
material Au.
Tel : 0044 (0)118 979 1238
Fax : 0044 (0)118 979 1283
email : info@actcrystals.com
Tape Dimensions ( Units in mm )
SOLDERING CONDITIONS
Issue 4 B3
Date 11-10-05
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
ACT53T / VT -4 TAPE & REEL SPECIFICATIONS