The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 2mm Pitch Connector Directly Mounted on Board DF4 Series Features 1. Cost Saving for Header Thanks to the insertion/extraction socket and the harness product at the both connector edges, one of two headers necessary at both edge sockets can be saved without losing the function to separate individual boards. 2. Miniature and Multiple Contacts The miniature connector has broad variations in contact number. Board mounting height : Maximum contact number : 4.3mm (Crimping Single row ) 32 contacts (Crimping Double row ) 3. Board Pre-fixed Mechanism The insertion state to the board is a light crimping, which enables the pre-fixed process to the board. Height 4.3mm Applications Note PC, Small business equipment Board pre-fixed mechanism B202 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales DF4 Series2mm Pitch Connector Directly Mounted on representative. Board Product Specifications Current rating Crimping Cable Size (Note 1) Rating Voltage rating Crimping Item AWG 24 : 3A Operating Temperature Range -30 to +85c(Note 1) AWG 26 : 2A Operating Moisture Range -40 to 80% AWG 28 : 1A Storage Temperature Range -10 to +60c(Note 2) Storage Moisture Range -40 to 70% 250V AC Specification Condition 1. Insulation Resistance 1000M ohms Min 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Crimping Area Resistance 30m ohms Max. 100mA 4. Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 No damage, cracks, or parts looseness. hours in each of the 3 directions. 5. Humidity (Steady state) Contact resistance: 30m ohms Max Insulation resistance:500M ohms Min 96 hours at temperature of 40c and humidity of 90% to 95% Contact resistance: 30m ohms Max Insulation resistance: 1000M ohms Min Temperature -55 5 to 35 +85 -5 to 35c 6. Temperature Cycle -30 5 to 15 30 time -5 to 15 min under 5 cycles. 7. Resistance to Soldering heat No deformation of components affecting performance. Manual soldering: 300c for 3 seconds Flow: 250c for 10 seconds Note 1: The rated current will be changed according to cable sizes for use. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Product Part Material Finish Remarks Crimping Plug Insulator Polyamide Black UL94V-0 Crimping Contact for Plug Contact Brass Tin plating ------- Ordering Information Connector DF4 q - * P - 2 C w e r t q Series Name: DF4 r Contact Pitch: 2mm w Number of Contact: 2 to 15, 4 to 32 t Connection Type e Connector Type C: Crimping socket P: Single row plug DP: Double row plug Contact DF4 - 2428- PCF q q Applicable cable size 2428 : AWG24 to 28 w w Packaging Type PCF: Plug contact/Reel PC: Plug contact/Bag B203 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.Mounted Please check on the products DF4 Series2mm Pitch Connector Directly Board status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Single Row Crimping Plug Photo: Contact insertion state. Applicable Through-hole Diameter : O0.8+0.1 +0 Unit:mm Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A B DF4- 2P-2C 544-0003-4 2 04.5 02.0 RoHS DF4- 9P-2C 544-0010-0 09 18.5 16.0 DF4- 3P-2C 544-0004-7 3 06.5 04.0 DF4-10P-2C 544-0011-2 10 20.5 18.0 DF4- 4P-2C 544-0005-0 4 08.5 06.0 DF4-11P-2C 544-0012-5 11 22.5 20.0 DF4- 5P-2C 544-0006-2 5 10.5 08.0 DF4-12P-2C 544-0013-8 12 24.5 22.0 DF4- 6P-2C 544-0007-5 6 12.5 10.0 DF4-13P-2C 544-0014-0 13 26.5 24.0 DF4- 7P-2C 544-0008-8 7 14.5 12.0 DF4-14P-2C 544-0015-3 14 28.5 26.0 DF4- 8P-2C 544-0009-0 8 16.5 14.0 DF4-15P-2C 544-0016-6 15 30.5 28.0 Yes RoHS Yes Note 1.The quantity at the specific No. "None" is delivered per bag (100pcs.). If needed, please order the products per bag. Crimping Contact Part Number CL No. Packaging Type Quantity Finish DF4-2428PCF(05) 544-0020-3-05 Reel 10,000 Tin plating DF4-2428PC(05) 544-0021-6-05 Bag 100 Tin plating RoHS Yes Applicable Cable (Tin plating Annealed copper wire) Conductor Size Recommended Cable AWG24 (11 cores./0.16mm) AWG 26 (7cores./0.16mm) AWG 28 (7cores./0.127mm) UL1061 Jacket Diameter O0.75 to O1.2mm UL1061/1007 Note:If other cables are used instead of the applicable cable, contact Hirose sales department. Strip Length: 1.3 to 1.9mm BApplicable Crimping Tool Type Applicator Press Main Unit Manual Crimping Tool Extraction Tool CL No. Applicable Contact AP105-DF4-2428P Part Number 901-4539-0 DF4-2428PCF(05) CM-105 901-0005-4 ------- DF4-TA2428HC 550-0173-6 DF4-2428PC(05) DF-C-PO (B) 550-0179-2 DF4-2428PCF(05) Note: If any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products. B204 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales DF4 Series2mm Pitch Connector Directly Mounted on representative. Board Double Row Crimping Plug Photo: Contact insertion state Applicable Through-hole Diameter O0.90.05 Note:The dip side may be deviated according to the cable thickness and the crimping contact bent up/down. Unit:mm Part Number CL No. Number of Contacts A B DF4-04DP-2C 544-0078-3 04 04.8 02.0 DF4-06DP-2C 544-0079-6 06 06.8 04.0 DF4-08DP-2C 544-0080-5 08 08.8 06.0 DF4-10DP-2C 544-0081-8 10 10.8 08.0 DF4-12DP-2C 544-0082-0 12 12.8 10.0 DF4-14DP-2C 544-0083-3 14 14.8 12.0 DF4-16DP-2C 544-0084-6 16 16.8 14.0 DF4-18DP-2C 544-0085-9 18 18.8 16.0 18.0 DF4-20DP-2C 544-0086-1 20 20.8 DF4-22DP-2C 544-0087-4 22 22.8 20.0 DF4-24DP-2C 544-0088-7 24 24.8 22.0 DF4-26DP-2C 544-0089-0 26 26.8 24.0 DF4-28DP-2C 544-0090-9 28 28.8 26.0 DF4-30DP-2C 544-0091-1 30 30.8 28.0 DF4-32DP-2C 544-0092-4 32 32.8 30.0 RoHS YES Note 1.The quantity at the specific No. "None" is delivered per bag (100pcs.). If needed, please order the products per bag. B205 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon.Mounted Please check on the products DF4 Series2mm Pitch Connector Directly Board status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BPrecautions 1. Recommended Flow: 250c for 3 seconds 1. Soldering Condition Manual soldering: 29010c for 2 seconds If the cable neighboring the connector is bent and unstraightened, secure a large bending radius because the Jacket will be broken by the solder heat and the contact wire will be exposed.The Jacket in this part will be tore. After the soldering process. If a stress is applied to the cable in the state where the connector and the cable has heat inside, the Jacket hold area will be loosen. Therefore, carry out the post-soldering operation after the connector has returned to the room temperature.. 2. Cleaning Condition Refer to Nylon Connector Use Hand book. Don't use a solvent such ass trichloroethylene which invades the cable Jacket. In addition, avoid heat cleaning by a solvent. 3. Connection Condition B206 Refer to the Nylon Connector Use Hand book. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: DF4-TA2428HC AP105-DF4-2428P DF4-11P-2R26 DF4-11P-2R28 DF4-11PA-2R26 DF4-11PA-2R28 DF4-12P2R26 DF4-12P-2R28 DF4-12PA-2R26 DF4-12PA-2R28 DF4-13P-2R26 DF4-13P-2R28 DF4-13PA-2R26 DF4-14P2R28 DF4-14PA-2R26 DF4-15PA-2R28 DF4-2P-2R28 DF4-3P-2R28 DF4-4P-2R28 DF4-5P-2R26 DF4-5P-2R28 DF4-5PA-2R28 DF4-6P-2R26 DF4-7P-2R26 DF4-7P-2R28 DF4-7PA-2R28 DF4-8PA-2R26 DF4-8PA-2R28 DF49P-2R26 DF4-9P-2R28 DF4-9PA-2R26 DF4-2428PC(05) DF4-2PA-2R26 DF4-3PA-2R26 DF4-4PA-2R26 DF45PA-2R26 DF4-6PA-2R26 DF4-7PA-2R26 DF4-10PA-2R26 DF4-15PA-2R26 DF4-2PA-2R28 DF4-3PA-2R28 DF46PA-2R28 DF4-9PA-2R28 DF4-10PA-2R28 DF4-13PA-2R28 DF4-14PA-2R28 DF4-3P-2R26 DF4-4P-2R26 DF48P-2R26 DF4-10P-2R26 DF4-14P-2R26 DF4-15P-2R26 DF4-6P-2R28 DF4-8P-2R28 DF4-10P-2R28 DF4-15P2R28