To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
©1993
DATA SHEET
ZENER DIODES
RD4.7UJ to RD39UJ
LOW NOISE SHARP BREAKDOWN CHARACTERISTICS
ZENER DIODES
2PIN ULTRA SUPER MINI MOLD
Document No. D13938EJ3V0DS00 (3rd edition)
(Previous No. DC-2135)
Date Published March 1999 N CP(K)
Printed in Japan
DESCRIPTION
Type RD4.7UJ to RD39UJ Series are 2PIN Ultra Super Mini
Mold Package zener diodes possessing an allowable power
dissipation of 150 mW featuring low noise and sharp break-
down characteristic. They are intended for use in audio equip-
ment, instrument equipment.
FEATURES
Low Noise
Sharp Breakdown characteristics
•Vz; Applied E24 standard
APPLICATIONS
Circuits for Constant Voltage, Constant Current, Waveform
clipper, Surge absorber, etc.
MAXIMUM RATINGS (TA = 25 °C)
Power Dissipation P 150 mW
Forward Current IF100 mA
Reverse Surge Power PRSM 2.2 W
(at t = 10
µ
s/1 pulse)
Show Fig. 6
Junction Temperature Tj150 °C
Storage Temperature Tstg –55 to +150 °C
2.1±0.1
0.11+0.05
–0.01
1.3±0.1
0.3±0.05
0.8±0.1
Cathode
Indication
0.7±0.1
0.15
0±0.05
PACKAGE DIMENSIONS
(Unit: mm)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability
and additional information.
RD4.7UJ to RD39UJ
2Data Sheet D13938EJ3V0DS00
ELECTRICAL CHARACTERISTICS (TA = 25 ± 2 °C)
Zener Voltage Reverse Current
Type Number Class Vz (V)Note 1 IR (
µ
A)
MIN. MAX. Iz (mA) MAX. Iz (mA) MAX. VR (V)
N 4.39 4.91
RD4.7UJ N1 4.39 4.62 0.5 800 0.5 2 1.0
N2 4.52 4.76
N3 4.66 4.91
N 4.81 5.36
RD5.1UJ N1 4.81 5.05 0.5 500 0.5 2 1.5
N2 4.95 5.20
N3 5.10 5.36
N 5.26 5.91
RD5.6UJ N1 5.26 5.54 0.5 200 0.5 1 2.5
N2 5.44 5.73
N3 5.63 5.91
N 5.81 6.53
RD6.2UJ N1 5.81 6.11 0.5 100 0.5 1 3.0
N2 6.01 6.32
N3 6.21 6.53
N 6.41 7.14
RD6.8UJ N1 6.41 6.74 0.5 60 0.5 0.5 3.5
N2 6.60 6.94
N3 6.80 7.14
N 7.00 7.83
RD7.5UJ N1 7.00 7.35 0.5 60 0.5 0.5 4.0
N2 7.21 7.60
N3 7.46 7.83
N 7.69 8.61
RD8.2UJ N1 7.69 8.08 0.5 60 0.5 0.5 5.0
N2 7.94 8.34
N3 8.20 8.61
N 8.47 9.51
RD9.1UJ N1 8.47 8.91 0.5 60 0.5 0.5 6.0
N2 8.76 9.21
N3 9.06 9.51
N 9.35 10.51
RD10UJ N1 9.35 9.82 0.5 60 0.5 0.1 7.0
N2 9.66 10.16
N3 10.00 10.51
N 10.32 11.50
RD11UJ N1 10.32 10.84 0.5 60 0.5 0.1 8.0
N2 10.64 11.17
N3 10.97 11.50
N 11.28 12.52
RD12UJ N1 11.28 11.83 0.5 80 0.5 0.1 9.0
N2 11.59 12.17
N3 11.93 12.52
N 12.29 13.86
RD13UJ N1 12.29 12.95 0.5 80 0.5 0.1 10.0
N2 12.72 13.40
N3 13.17 13.86
Dynamic
Impedance
Zz ()Note 2
RD4.7UJ to RD39UJ
3Data Sheet D13938EJ3V0DS00
Zener Voltage Reverse Current
Type Number Class Vz (V)Note 1 IR (
µ
A)
MIN. MAX. Iz (mA) MAX. Iz (mA) MAX. VR (V)
N 13.63 15.38
RD15UJ N1 13.63 14.35 0.5 80 0.5 0.1 11
N2 14.12 14.85
N3 14.62 15.38
N 15.13 16.91
RD16UJ N1 15.13 15.87 0.5 80 0.5 0.1 12
N2 15.58 16.36
N3 16.07 16.91
N 16.63 18.81
RD18UJ N1 16.63 17.52 0.5 80 0.5 0.1 13
N2 17.24 18.15
N3 17.87 18.81
N 18.51 20.79
RD20UJ N1 18.51 19.42 0.5 100 0.5 0.1 15
N2 19.14 20.12
N3 19.80 20.79
N 20.46 22.82
RD22UJ N1 20.46 21.47 0.5 100 0.5 0.1 17
N2 21.09 22.15
N3 21.76 22.82
N 22.42 25.17
RD24UJ N1 22.42 23.59 0.5 120 0.5 0.1 19
N2 23.19 24.38
N3 23.98 25.17
N 24.75 27.95
RD27UJ N1 24.75 26.04 0.5 150 0.5 0.1 21
N2 25.56 26.96
N3 26.46 27.95
N 27.38 31.04
RD30UJ N1 27.38 29.00 0.5 200 0.5 0.1 23
N2 28.35 30.04
N3 29.37 31.04
N 30.30 33.97
RD33UJ N1 30.30 32.02 0.5 250 0.5 0.1 25
N2 31.21 32.98
N3 32.14 33.97
N 33.08 36.83
RD36UJ N1 33.08 34.92 0.5 300 0.5 0.1 27
N2 33.95 36.85
N3 34.87 36.83
N 35.78 39.67
RD39UJ N1 35.78 37.75 0.5 360 0.5 0.1 30
N2 36.63 38.69
N3 37.56 39.67
Note 1. Tested with pulse (40 ms)
2. Zz is measured at Iz by given a very small A.C. current signal
Dynamic
Impedance
Zz ()Note 2
RD4.7UJ to RD39UJ
4Data Sheet D13938EJ3V0DS00
TYPICAL CHARACTERISTICS (TA = 25 °C)
Fig. 1 P – TA RATING
Fig. 2 Iz –Vz CHARACTERISTICS (a to d)
200
150
100
50
0 50 100 150 200
10×7.5×0.75
P.C.B. (Ceramic)
10×7.5×0.75
P.C.B. (Glass Epoxy)
20×15×0.75
P.C.B. (Ceramic)
30×30×0.75
P.C.B. (Ceramic)
T
A
- Ambient Temperature - °C
P - Power Dissipation - mW
100 m
10 m
1 m
100
10
100 m
10 m
1 m
100
10
3456789 9101112131415
V
z
- Zener Voltage - V
(a) V
z
- Zener Voltage - V
(b)
I
z
- Zener Current - A
I
z
- Zener Current - A
RD4.7UJ
RD5.1UJ
RD5.6UJ
RD8.2UJ
RD7.5UJ
RD6.8UJ
RD6.2UJ
RD9.1UJ
RD15UJ
RD13UJ
RD12UJ
RD11UJ
RD10UJ
µµ
µµ
RD4.7UJ to RD39UJ
5Data Sheet D13938EJ3V0DS00
Fig. 3
γ
z – Vz CHARACTERISTICS
100 m
10 m
1 m
100
10
100 m
10 m
1 m
100
10
16 18 20 22 24 26 28 36 38 40 42
V
z
- Zener Voltage - V
(c) V
z
- Zener Voltage - V
(d)
I
z
- Zener Current - A
I
z
- Zener Current - A
28 30 32 34 44
RD39UJ
RD36UJ
RD33UJ
RD30UJ
RD27UJ
RD24UJ
RD22UJ
RD20UJ
RD18UJ
RD16UJ
µ
µ
µ
µ
0.08
0.06
0.04
0.02
0
–0.02
–0.04
32
24
16
8
0
–8
–16
4 8 12 16 20 24 28 32 36 40
%/°C
mV/°C
VZ - Zener Voltage - V
γZ -VZ - Temperature Coefficient - %/°C
γZ -VZ - Temperature Coefficient - mV/°C
RD4.7UJ to RD39UJ
6Data Sheet D13938EJ3V0DS00
Fig. 4 TRANSIENT THERMAL IMPEDANCE CHARACTERISTIC
Fig. 5 SURGE REVERSE POWER RATINGS
t – Time – s
Z
th
– Transient Thermal Impedance – °C/W
1 m 10 m 100 m 1 10 100
1000
100
10
1
833 °C/W
P.C.B. (Glass Epoxy)
(30mm×30 mm×1.6mm)
t
T
– Pulse Width – s
P
RSM
– Surge Reverse Power – W
t
T
Repetitive
P
RSM
T
A
= 25 °C
1 10 100 1 m 10 m 100 m
1000
100
10
1
µµµ
RD4.7UJ to RD39UJ
7Data Sheet D13938EJ3V0DS00
[MEMO]
RD4.7UJ to RD39UJ
[MEMO]
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in
this document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a device described herein or any other liability arising
from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights
or other intellectual property rights of NEC Corporation or others.
Descriptions of circuits, software, and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these circuits,
software, and information in the design of the customer's equipment shall be done under the full responsibility
of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third
parties arising from the use of these circuits, software, and information.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a
customer designated “quality assurance program“ for a specific application. The recommended applications of
a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device
before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
M7 98.8