Diode Fast Features: * * * * * High efficiency, Low VF High current capability High reliability High surge current capability Low power loss Specifications: Mechanical Data: Cases : Moulded plastic Lead : Pure tin plated, lead free, solderable per MIL-STD-202, Method 208 guaranteed Polarity : Colour band denotes cathode end High temperature soldering guaranteed : 260C/10 seconds/0.375, (9.5mm) lead lengths at 5lbs., (2.3kg) tension Weight : 0.4g Maximum Ratings and Electrical Characteristics: Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Type Number Symbol FR203 FR205 FR207 Maximum Recurrent Peak Reverse Voltage Vrrm 200 600 1,000 Maximum RMS Voltage Vrms 140 420 700 Maximum DC Blocking Voltage Vdc 200 600 1,000 Maximum Average Forward Rectified Current 0.375 (9.5mm) Lead Length at Ta = 55C I(av) Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Ifsm 60 Maximum Instantaneous Forward Voltage at 1A Vf 1.2 Maximum DC Reverse Current at Ta = 25C at Rated DC Blocking Voltage at Ta = 125C Ir Units V 2 A 5 150 V 10 400 A A www.element14.com www.farnell.com www.newark.com Page <1> 08/02/13 V1.0 Diode Fast Type Number Symbol FR203 FR205 FR207 Units Maximum Reverse Recovery Time (Note 1) Trr 150 250 500 nS Typical Junction Capacitance (Note 2) Cj Typical Thermal Resistance 30 pF 60 18 5 C/W -65 to +150 C RJA RJL RJC Operating Temperature Range Storage Temperature Range Tj Tstg Note: 1. Reverse Recovery Test Conditions: IF = 0.5A, IR = 1A, IRR = 0.25A. Note: 2. Measured at 1MHz and Applied Reverse Voltage of 4V DC. Note: 3. Mount on Cu-Pad Size 10mm x 10mm on PCB. Ratings and Characteristic Curves (FR203, FR205 and FR207) www.element14.com www.farnell.com www.newark.com Page <2> 08/02/13 V1.0 Diode Fast www.element14.com www.farnell.com www.newark.com Page <3> 08/02/13 V1.0 Diode Fast Note: 1. Rise Time = 7ns Maximum. Input Impedance = 1M 22pf Note: 2. Rise Time = 10ns Maximum Source Impedance = 50 Part Number Table Dimensions : Inches (Millimetres) Description Part Number Diode, Fast, 2A, 200V FR203 Diode, Fast, 2A, 600V FR205 Diode, Fast, 2A, 1,000V FR207 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <4> 08/02/13 V1.0