Integrated Communications Processors MPC8309 PowerQUICC II Pro Processor Overview The MPC8309 processor is part of the entry MPC8309 Block Diagram level MPC830x communications portfolio based on the e300 core architecture. It addresses e300 Core Complex the requirements of networking applications, 16/32-bit DDR2 Controller including I/O cards for low-end base stations, 16 KB D-Cache low-end Ethernet switches, residential gateways, modem/routers, industrial control, factory automation and test and measurement applications. The MPC830x portfolio extends 16 KB I-Cache Local Bus QUICC Engine Coherent System Bus current PowerQUICC processor offerings, delivering an impressive 1.99 DMIPS/MHz in CPU performance, additional functionality and faster interfaces while maintaining code compatibility with PowerQUICC I and PowerQUICC II processors. MPC830x processors also provide sub-$10, low power Up to 2 x HDLC 3 x RMII/MII /TDM or 2 x with IEEE(R) 1588 eSDHC 8-bit consumption, a compact board footprint and a 4x CAN 8-bit USB 2.0 DMA PCI 2 x DUART I2C, SPI GPIO, Interrupt Controller Or 16-bit GPIO time to market advantage through cost-effective evaluation kits with optimized BSP and drivers. Core Complex The MPC8309 incorporates the e300c3 (MPC603e-based) core, built on Power Architecture(R) technology, which includes 16 KB of L1 instruction and data caches, dual integer units and on-chip memory management units (MMUs). QUICC Engine Technology A communications complex based on QUICC Engine technology forms the heart of the networking capability of the MPC830x portfolio. The QUICC Engine block contains several peripheral controllers and a 32-bit RISC controller. Protocol support is provided by the main workhorses of the device--the unified communication controllers (UCCs). Each of the five UCCs can support a variety of communication protocols, including 10/100 Mbps Ethernet and high-level data link control (HDLC). Two of the UCCs can also support IEEE(R) 1588 version-2 time stamping. System Interface Unit The MPC8309 processor also includes a 16/32bit double data rate (DDR2) memory controller Core Accelerators I/O with ECC support, 4 x CAN, 4 x UARTs, MPC8309 Features High-Speed USB 2.0 controller, enhanced * Excellent performance, low-power, sub-$10 SDHC controller, a 32-bit peripheral component interconnect (PCI) controller, a 16-bit local bus and two direct memory access controllers (DMAC). In summary, the MPC8309 provides users with a highly integrated, fully programmable communications processor helping to ensure that a cost-effective system solution can be quickly developed while offering the flexibility to accommodate new standards and evolving system requirements. communications processor * The e300 core, built on Power Architecture technology, with dual integer units enables more efficient operations to be conducted in parallel, resulting in a significant performance improvement * The single-RISC QUICC Engine communications module offers a futureproof solution for next-generation designs by supporting programmable protocol termination and network interface termination to meet evolving protocol standards * DDR2 memory controller--one 16/32-bit interface at up to 333 MHz with ECC support * Peripheral interfaces such as 32-bit, 66 MHz PCI, 16-bit, 66 MHz local bus interface and High-Speed USB 2.0, 4 x CAN, 4 x UARTs, enhanced SDHC controller * High degree of software compatibility with previous generation PowerQUICC - PROFIBUS protocol support This same carrier card can be used for the - Asynchronous HDLC (bit rate up to MPC8306 processor SOM card. processor-based designs for backward The MPC830x-KIT board support package 2 Mbps) compatibility and easier software migration - Two TDM interfaces supporting up to 128 channels, each running at 64 Kbps QUICC Engine Technology * Single 32-bit RISC controller for flexible support of communications peripherals * Serial DMA channel for receive and transmit on all serial channels * Five UCCs supporting the following interfaces (not all simultaneously) - 10/100 Mbps Ethernet/IEEE Std. 802.3 through MII and RMII interfaces - IEEE 1588 version-2 support - HDLC/transparent (bit rate up to QUICC Engine operating frequency divided by eight) - HDLC bus (bit rate up to 10 Mbps) The UCCs are similar to the PowerQUICC II peripherals in that the serial communications (BSP) can be customized per project and combined with off-the-shelf software for product development. The BSP components provide the tools, device drivers and additional features needed for embedded controller (SCC) supports the UART and Linux(R) OS projects. HDLC bus and fast serial communications MPC8309-KIT Contents controller (FCC) supports fast Ethernet and HDLC. * MPC8309 SOM board * MPC830x carrier card Enablement * BSP The MPC8309-KIT is a cost-optimized * UART cable reference development kit for the MPC8309 processor. The kit consists of a carrier * Ethernet cable * Power adaptor (12V-5A) and cable card and processor-specific system on module (SOM) card. The SOM interfaces with peripherals through the carrier card. MPC830x PowerQUICC II Pro Processor Portfolio MPC8308 MPC8309 MPC8306 MPC8306S Core e300 e300 e300 e300 I-Cache/D-Cache 16K/16K 16K/16K 16K/16K 16K/16K Floating Point Unit Yes Yes Yes Yes Core Frequency 266/333/400 266/333/400/417 133/200/266 133/200/266 QUICC Engine Subsystem No 32-bit RISC 32-bit RISC 32-bit RISC Memory Controller 16/32-bit DDR2 with ECC 16/32-bit DDR2 with ECC 16-bit DDR2 16-bit DDR2 Local Bus 8/16-bit up to 66 MHz 8/16-bit up to 66 MHz 8/16-bit up to 66 MHz 8/16-bit up to 66 MHz PCI Interface No (1 x PCI Express) 32-bit up to 66 MHz No No Ethernet 2 x 10/100/1000 MII/RGMII 3 x 10/100 MII/RMII or 2 x 10/100 with IEEE 1588 V2 3 x 10/100 MII / RMII or 2 x 10/100 with IEEE 1588 V2 3 x 10/100 MII/RMII USB 2.0 Yes Yes Yes Yes UART Yes (2 x) Yes (4 x) Yes (4 x) Yes (4 x) I C Controller Dual Dual Dual Dual SPI Yes Yes Yes Yes 2 Interrupt Controller IPIC IPIC IPIC IPIC IEEE(R) 1588 Support Yes Yes Yes No eSDHC Yes Yes Yes No FlexCAN No Yes Yes No Package 473-pin MAPBGA 489-pin MAPBGA 369-pin MAPBGA 369-pin MAPBGA Learn More: Freescale, the Freescale logo and PowerQUICC are trademarks of Freescale Semiconductor, Inc. Reg. U.S. Pat. & Tm.Off. QUICC Engine is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power. org logos and related marks are trademarks and service marks licensed by Power.org. (c) 2010-2011 Freescale Semiconductor, Inc. Document Number: MPC8309FS REV 2 For current information about Freescale products and documentation, please visit freescale.com/PowerQUICC.