HVQ CONNECTOR 2.5mm Board-to-board connectors pitch Features ------------------------ * Superior folded beam construction (1) This sturdy construction withstands repeated stress, resists permanent deformation, and offers a very long service life. (2) This contact design has a large tolerance for variations in mating post thickness and resists deformation when pried. * Wide, sturdy post The post has a large cross-sectional area to resist prying during insertion into printed circuit boards and mating with connector housings. * Molded-in header The posts are molded into the insulator to provide stability when mounted on printed circuit boards. This also prevents flux from entering the connector during soldering. This 2.5 mm pitch connector is used to interconnect printed circuit boards in parallel, vertically or horizontally. Specifications ------------------- * Current rating: 3 A AC, DC * Voltage rating: 250 V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. * Insulation resistance: 500 M min. * Withstanding voltage: 1,500 VAC/minute * Applicable PC board thickness: 1.6 mm * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. Standards ---------------------- 0 1 Recognized E60389 Certified LR20812 1 HVQ CONNECTOR Receptacle --------------------------------------------------------------- with lock Side entry type 8.2 B A (3.5) 3 4.8 3.6 4.8 5 2.5 Top entry type 1.6 without lock 1.9 Side entry type 8.2 (3.5) without lock 8.2 B A 1.6 1.9 3.4 3.4 4.8 3.6 B A 5 2.5 4.8 1.9 3.4 3.4 1.6 1.6 5 2.5 1.9 Model No. Circuits Top entry type Side entry type 5 2.5 Dimensions (mm) Q'ty/box With lock Without lock With lock Without lock A B With lock Without lock 3 - F 3P-HVQ - F 3P-SHVQ 5.0 12.0 - 500 4 - F 4P-HVQ - F 4P-SHVQ 7.5 14.5 - 500 5 5P-HVQ F 5P-HVQ 5P-SHVQ F 5P-SHVQ 10.0 17.0 250 250 6 6P-HVQ F 6P-HVQ 6P-SHVQ F 6P-SHVQ 12.5 19.5 250 250 7 7P-HVQ F 7P-HVQ 7P-SHVQ F 7P-SHVQ 15.0 22.0 200 250 8 8P-HVQ F 8P-HVQ 8P-SHVQ F 8P-SHVQ 17.5 24.5 200 200 9 9P-HVQ F 9P-HVQ 9P-SHVQ F 9P-SHVQ 20.0 27.0 200 200 10 10P-HVQ F10P-HVQ 10P-SHVQ F10P-SHVQ 22.5 29.5 100 200 11 11P-HVQ F11P-HVQ 11P-SHVQ F11P-SHVQ 25.0 32.0 100 150 12 12P-HVQ F12P-HVQ 12P-SHVQ F12P-SHVQ 27.5 34.5 100 150 13 - F13P-HVQ - F13P-SHVQ 30.0 37.0 - 100 14 - F14P-HVQ - F14P-SHVQ 32.5 39.5 - 100 15 - F15P-HVQ - F15P-SHVQ 35.0 42.0 - 100 16 - F16P-HVQ - F16P-SHVQ 37.5 44.5 - 100 17 - F17P-HVQ - F17P-SHVQ 40.0 47.0 - 100 18 - F18P-HVQ - F18P-SHVQ 42.5 49.5 - 100 19 - F19P-HVQ - F19P-SHVQ 45.0 52.0 - 100 20 - F20P-HVQ - F20P-SHVQ 47.5 54.5 - 100 21 - F21P-HVQ - F21P-SHVQ 50.0 57.0 - 100 22 - F22P-HVQ - F22P-SHVQ 52.5 59.5 - 100 23 - F23P-HVQ - F23P-SHVQ 55.0 62.0 - 100 24 - F24P-HVQ - F24P-SHVQ 57.5 64.5 - 100 25 - F25P-HVQ - F25P-SHVQ 60.0 67.0 - 100 Material and Finish Contact: Brass, tin-plated (reflow treatment) Housing: PA 66, UL94V-2, natural RoHS compliance 2 8.2 1.7 1.7 3 (3) B A with lock (3) Top entry type HVQ CONNECTOR Shrouded header --------------------------------------------------------- Circuits Top entry type 3 0.64 1 2.5 4 5 6 6 7 8 3.2 9 10 3.4 11 12 0.64 13 3.5 A 14 5.6 15 16 17 18 Side entry type 19 1 6 20 21 3.5 5.6 22 23 24 3 25 Q'ty/reel Dimensions (mm) A Top entry type Side entry type Model No. Top entry type Side entry type B 3P-SHF-1AA BS 3P-SHF-1AA B 4P-SHF-1AA BS 4P-SHF-1AA B 5P-SHF-1AA BS 5P-SHF-1AA B 6P-SHF-1AA BS 6P-SHF-1AA B 7P-SHF-1AA BS 7P-SHF-1AA B 8P-SHF-1AA BS 8P-SHF-1AA B 9P-SHF-1AA BS 9P-SHF-1AA B10P-SHF-1AA BS10P-SHF-1AA B11P-SHF-1AA BS11P-SHF-1AA B12P-SHF-1AA BS12P-SHF-1AA B13P-SHF-1AA BS13P-SHF-1AA B14P-SHF-1AA BS14P-SHF-1AA B15P-SHF-1AA BS15P-SHF-1AA B16P-SHF-1AA BS16P-SHF-1AA B17P-SHF-1AA BS17P-SHF-1AA B18P-SHF-1AA BS18P-SHF-1AA B19P-SHF-1AA BS19P-SHF-1AA B20P-SHF-1AA BS20P-SHF-1AA B21P-SHF-1AA BS21P-SHF-1AA B22P-SHF-1AA BS22P-SHF-1AA B23P-SHF-1AA BS23P-SHF-1AA B24P-SHF-1AA BS24P-SHF-1AA B25P-SHF-1AA BS25P-SHF-1AA 5.0 1,000 1,000 7.5 1,000 1,000 10.0 1,000 500 12.5 500 500 15.0 500 500 17.5 500 500 20.0 500 500 22.5 250 250 25.0 250 250 27.5 250 200 30.0 250 200 32.5 250 200 35.0 250 200 37.5 250 200 40.0 250 200 42.5 200 200 45.0 250 200 47.5 250 200 50.0 250 200 52.5 250 200 55.0 250 200 57.5 250 200 60.0 250 200 Material and Finish 0.64 0.64 2.5 5.5 A Post: Brass copper-undercoated, tin-plated (reflow treatment) Base: PA 66, UL94V-0, natural 3 RoHS compliance This product displays (LF)(SN) on a label. PC board layout (viewed from soldering side) -------------------------------------- Top entry type Side entry type 2.5 0.05 2.50.05 3.1min. 3.1min. Receptacle: 6.4 Header: 3 Header: 3.5min. Receptacle: 1.0 +0.15 -0.05 Header: 0.9 +0.1 0 Receptacle: 1.0 +0.15 -0.05 Header: 0.9 +0.1 0 Note: 1. Tolerances are non-cumulative: 0.05 mm for all centers. 2. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. Assembly layout ---------------------------------------------------------- Top entry type receptacle and top entry type shrouded header 6.5 Side entry type receptacle and top entry type shrouded header Side entry type receptacle and side entry type shrouded header 3.4 6.5 1.2 3.2 11.4 11.4 6.5 6.4 14.2 3 (8.8) 3.5 3.5 3