3 Linerless Label Tape 3341 Temporary Data Sheet* Technical Information Revision 1 Scotch(R) Linerless Label Tape 3341 is a high quality, bright white, linerless label tape used in combination with any of the Scotch(R) Thermal Transfer Ribbons and the 3M-MaticTM Case Labeling Systems Applicators to produce high quality labels. Sharp, scanable bar codes, text and graphics imaged on the white polypropylene film backing and adhered with the pressure sensitive hot-melt adhesive withstand the rigorous shipping conditions encountered by many corrugated shipping containers. When used with the 3M-MaticTM SA2000 side/top applicator, the linerless label tape provides high quality compliance labels. Features Advantages Benefits Thermal Transfer printable Easy to print Saves time and reduces need for pre-cut labels Polypropylene backing Strong reliable backing means fewer breaks Saves valuable time in the printing and application processes Pressure sensitive hot-melt rubber-resin adhesive Adheres well to a wide variety of surfaces Ensures good adhesion of labels to corrugated shipping cases. Secure ink bond to backing Provides excellent scuff and rub resistance High quality barcode scanning at all distribution points Applications / Performance Mainly used for labeling corrugated shipping cases. Application of Linerless Label Tape 3341 is most easily accomplished at room temperature. Once applied, Linerless Label Tape 3341 performs well throughout the normal temperature ranges typically encountered by packaged products in shipping and storage environments. Recommended Print Engines and Dispensers Print engines: Sato 8485 SE, & Sato 8490 SE, Etipack Applicators: SA2000 Side/Top Labeler Scotch(R) Linerless Label Tape 3341 Typical Physical Properties (Not recommended of specification purposes) ASTM Test Method Adhesion to Steel: 52oz./in. width (57 N/100mm width) D-3330 Tensile Strength: Machine Direction: Cross Direction: 31 lbs./in. width (543 N/100 mm width) 31 lbs./in. width (543 N/100 mm width) D-3759 D-3759 Elongation at Break: 100 % D-3759 Thickness Backing: Total: 1.6 mil (0.041 mm) 2.6 mil (0.066 mm) D-3652 D-3652 Opacity: Holding Power to Fiberboard: 93 3,000 + minutes LABSCAN 6000 D-3654 Available Sizes / Colors Width (in.): Length (Meters): Core: Colors : 2", 3", 4" 914 3" (76 mm) White Storage Conditions Store in clean dry place. Temperature of 18 - 21 C and 40 to 50 percent relative humidity are recommended. * Based on limited production. As sufficient production data is gathered, a permanent data sheet will be issued. Technical Data: All physical properties, statements, and recommendations are based either on tests we believe to be reliable or our experience, but they are not guaranteed. 3M recommends each user determine the suitability of the product for the intended use. Warranty and Limited Remedy: THE FOLLOWING WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE: 3M warrants its tapes will be free from defects in material and manufacture. If a tape is proved to be defective, then the exclusive remedy, and 3M's and seller's sole obligation shall be, at 3M's option, to replace the quantity of the tape which is proved to be defective or to refund the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. The foregoing Warranty and Limited Remedy and Limitation of Liability may be changed only by a written agreement signed by authorized officers of 3M and seller. 3 Packaging Systems Division 3M Center, Building 230-1S-10 St. Paul, MN 55144-1000 USA 1- 800-722-5463 Printed in U.S.A. (c) 3M 2002