R Short Barrel Inductive Prox E2E 2-WIRE DC Reduce Wiring to Control Devices with Short-Barrel 2-Wire DC Prox Sensors H Thick nickel-plated brass barrel has wrench flats for easy installation H Solid potted internal circuitry withstands shocks and water washdown to IP67 H High visibility indicator H Choose prewired or connector models Ordering Information WHEN ORDERING, PLEASE NOTE: Omron has added the suffix "-N" to E2E part numbers for ordering purposes only; the suffix "-N" will not appear on the product. J PREWIRED SENSORS Self-diagnostic g output function Type yp Size Yes Shielded M12 M18 M30 Unshielded M12 M18 M30 Part number Sensing g distance 3 mm 7 mm 10 mm 8 mm 14 mm 20 mm NO (Note.) NC E2E-X3D1S-N --- E2E-X7D1S-N --- E2E-X10D1S-N --- E2E-X8MD1S-N --- E2E-X14MD1S-N --- E2E-X20MD1S-N --- Note: A different oscillating frequency is available. Add a "5" to the part number (e.g., E2E-X3D15-N-N). (This table continues on the next page.) 2 E2E 2-WIRE DC E2E 2-WIRE DC Ordering Information -- continued from previous page Self-diagnostic g output function Type yp Size No Shielded M8 2 mm M12 3 mm M18 7 mm M30 Unshielded Part number Sensing g distance 10 mm M8 4 mm M12 8 mm M18 14 mm M30 20 mm NO (Notes 1, 2.) NC E2E-X2D1-N-N E2E-X2D2-N-N E2E-X3D1-N-N E2E-X3D2-N-N E2E-X7D1-N-N E2E-X7D2-N-N E2E-X10D1-N-N E2E-X10D2-N-N E2E-X4MD1-N E2E-X4MD2-N E2E-X8MD1-N E2E-X8MD2-N E2E-X14MD1-N E2E-X14MD2-N E2E-X20MD1-N E2E-X20MD2-N Note: 1. A different oscillating frequency is available. Add a "5" to the part number (e.g., E2E-X3D15-N-N). 2. E2E sensors with robotic cable are available. Add a "-R" in the part number (e.g., E2E-X3D1-R-N). J SENSORS WITH BUILT-IN CONNECTOR Connector size Self-diagnostic output function Type M12/Micro ChangeR Yes Shielded Size M12 Part number Sensing distance 3 mm M18 7 mm M30 10 mm Unshielded M12 8 mm M18 14 mm M30 No Shielded M8 M12 20 mm 2 mm 3 mm M18 7 mm M30 10 mm NO (Pins 1 and 4) NC (Pins 1 and 2) E2E-X3D1S-M1-N --- E2E-X7D1S-M1-N --- E2E-X10D1S-M1-N --- E2E-X8MD1S-M1-N --- E2E-X14MD1S-M1-N --- E2E-X20MD1S-M1-N --- E2E-X2D1-M1G-N E2E-X2D2-M1G-N E2E-X3D1-M1G-N (See Note 1.) E2E-X3D2-M1G-N E2E-X7D1-M1G-N (See Note 1.) E2E-X7D2-M1G-N E2E-X10D1-M1G-N (See Note 1.) E2E-X10D2-M1G-N Note: 1. A different oscillating frequency is available. Add a "5" to the part number (e.g., E2E-X3D15-N-N). 2. E2E sensors with a "G" in the part number denotes alternate pin arrangement. Refer to the Connections section. 3. Connector cordsets: For MicroChanger use OMRON Y96E-44jDj; for NanoChanger use Omron XS3F-M42j-40j-R. (This table continues on the next page.) 3 E2E 2-WIRE DC E2E 2-WIRE DC Ordering Information -- continued from previous page Connector size Self-diagnostic output function Type M12/Micro ChangeR No Unshielded M8 Size Part number Sensing distance 4 mm M12 8 mm M18 14 mm M30 M8/Nano ChangeR Shielded M8 20 mm 2 mm Unshielded 4 mm NO (Pins 1 and 4) NC (Pins 1 and 2) E2E-X4MD1-M1G-N E2E-X4MD2-M1G-N E2E-X8MD1-M1G-N (See Note 1.) E2E-X8MD2-M1G-N E2E-X14MD1-M1G-N (See Note 1.) E2E-X14MD2-M1G-N E2E-X20MD1-M1G-N (See Note 1.) E2E-X20MD2-M1G-N E2E-X2D1-M3G E2E-X2D2-M3G E2E-X4MD1-M3G E2E-X4MD2-M3G Note: 1. A different oscillating frequency is available. Add a "5" to the part number (e.g., E2E-X3D15-N-N). 2. E2E sensors with a "G" in the part number denotes alternate pin arrangement. Refer to the Connections section. 3. Connector cordsets: For MicroChanger use OMRON Y96E-44jDj; for NanoChanger use Omron XS3F-M42j-40j-R. J SENSOR WITH PIGTAIL CONNECTOR Type yp Size Shielded M12 Sensing g distance Polarityy Part number NO 3 mm M18 M30 Unshielded M12 M18 M30 7 mm 10 mm 8 mm 14 mm 20 mm Yes E2E-X3D1-M1GJ-N No E2E-X3D1-M1J-T-N Yes E2E-X7D1-M1GJ-N No E2E-X7D1-M1J-T-N Yes E2E-X10D1-M1GJ-N No E2E-X10D1-M1J-T-N Yes E2E-X8MD1-M1GJ-N E2E-X14MD1-M1GJ-N E2E-X20MD1-M1GJ-N Note: 1. A model with no polarity has a residual voltage of 5 V, which must be taken into consideration together with the interface condition (the PLC's ON voltage, for example) when connecting the proximity sensor to a load. 2. Connector cordsets: Use OMRON Y96E-44jDj. 4 E2E 2-WIRE DC E2E 2-WIRE DC J SENSOR WITH FOUR-PIN CONNECTOR Type yp Size Shielded M8 M12 M18 2 mm 3 mm 7 mm M30 Unshielded Part number Sensing g distance M8 10 mm 4 mm M12 8 mm M18 14 mm M30 20 mm NO (Pins 3 and 4) NC (Pins 2 and 3) E2E-X2D1-M1-N E2E-X2D2-M1-N E2E-X3D1-M1-N E2E-X3D2-M1-N E2E-X7D1-M1-N E2E-X7D2-M1-N E2E-X10D1-M1-N E2E-X10D2-M1-N E2E-X4MD1-M1-N E2E-X4MD2-M1-N E2E-X8MD1-M1-N E2E-X8MD2-M1-N E2E-X14MD1-M1-N E2E-X14MD2-M1-N E2E-X20MD1-M1-N E2E-X20MD2-M1-N J ACCESSORIES Description Mounting g brackets Silicone rubber covers for shielded sensors Connector cordsets Part number Fits M8 size sensors Y92E-B8 Fits M12 size sensors Y92E-B12 Fits M18 size sensors Y92E-B18 Fits M30 size sensors Y92E-B30 Fits M12 size sensors Y92E-E12-2 Fits M18 size sensors Y92E-E18-2 Fits M30 size sensors Y92E-E30-2 See Y96E and XS Connector Cordsets data sheets for details Note: Use OMRON Y96E-44jDj cordsets with M12 connector; use XS3F cordsets with M8 connector. J REPLACEMENT PARTS Description Mounting g hardware including g one pair p of metal nuts and d one washer h Part number Fits M8 size sensors M8-MHWS Fits M12 size sensors M12-MHWS Fits M18 size sensors M18-MHWS Fits M30 size sensors M30-MHWS 5