E2E2-WIREDC E2E2-WIREDC
3
Ordering Information -- continued from previous page
Self-diagnostic Type Size Sensing distance Part number
output function
NO (Notes 1, 2.) NC
No Shielded M8 2mm E2E-X2D1-N-N E2E-X2D2-N-N
M12 3mm E2E-X3D1-N-N E2E-X3D2-N-N
M18 7mm E2E-X7D1-N-N E2E-X7D2-N-N
M30 10 mm E2E-X10D1-N-N E2E-X10D2-N-N
Unshielded M8
4mm
E2E-X4MD1-N E2E-X4MD2-N
M12 8mm E2E-X8MD1-N E2E-X8MD2-N
M18
14 mm
E2E-X14MD1-N E2E-X14MD2-N
M30
20 mm
E2E-X20MD1-N E2E-X20MD2-N
Note: 1. A different oscillating frequency is available. Add a “5” to the part number (e.g., E2E-X3D15-N-N).
2. E2E sensors with robotic cable are available. Add a “-R” in the part number (e.g., E2E-X3D1-R-N).
JSENSORS WITH BUILT-IN CONNECTOR
Connector
Self-diag-
Type Size Sensing distance Part number
size nostic output
function NO (Pins 1 and 4) NC (Pins 1 and 2)
M12/Micro
ChangeR
Yes Shielded M12 3mm E2E-X3D1S-M1-N ---
M18 7mm E2E-X7D1S-M1-N ---
M30 10 mm E2E-X10D1S-M1-N ---
Unshielded M12 8mm E2E-X8MD1S-M1-N ---
M18 14 mm E2E-X14MD1S-M1-N ---
M30 20 mm E2E-X20MD1S-M1-N ---
No Shielded M8 2mm E2E-X2D1-M1G-N E2E-X2D2-M1G-N
M12 3mm E2E-X3D1-M1G-N
(See Note 1.)
E2E-X3D2-M1G-N
M18 7mm E2E-X7D1-M1G-N
(See Note 1.)
E2E-X7D2-M1G-N
M30 10 mm E2E-X10D1-M1G-N
(See Note 1.)
E2E-X10D2-M1G-N
Note: 1. A different oscillating frequency is available. Add a “5” to the part number (e.g., E2E-X3D15-N-N).
2. E2E sensors with a “G” in the part number denotes alternate pin arrangement. Refer to the Connections section.
3. Connector cordsets: For MicroChangeruse OMRON Y96E-44jDj; for NanoChangeruse Omron XS3F-M42j-40j-R.
(This table continues on the next page.)