SDK CONNECTOR Reverse Type Specifications ------------------- * Current rating: 0.5A AC, DC * Voltage rating: 5V AC, DC * Temperature range: 25C to +85C (including temperature rise in applying electrical current) * Recommended PC board thickness: 0.6 to 1.0mm When it is mounted on the FPC, recommendable reinforcing layer thickness is 0.6mm min. * Contact resistance: (Signal part) Initial value/30m max. After environmental testing/60m max. (Switch part) Initial value/100m max. After environmental testing/100m max. * Insulation resistance: 1,000M min. at 500V DC * Withstanding voltage: 500V AC/minute * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. This connector is designed for SD Card & MMC (Multi media card), complying with the SD Card Association standard, and is with the switch for Write-protection & Carddetection. And due to Push-push mechanism design, its card can be easily ejected by push-push operation. * Space saving design, 27.1mm(W)x 30.1mm(D)x 2.8mm(H) * The enough amount of card ejection (8.4mm) * 10,000 mating cycles is guaranteed. * Prevention of reverse card insertion PC board layout (viewed from component side) and Assembly layout 13.2250.05 9.9250.05 9.0750.05 8.3250.05 7.0750.05 6.7250.05 5.4750.05 5.1250.05 1.20.05 10.05 13.4250.05 23.10.05 26.10.05 1.20.05 10.05 0.90.05 0.90.05 14.6750.05 2.5 0.80.05 2.10.05 4.50.05 Circuit No.7 Circuit No.8 Circuit No.5 Circuit No.6 Circuit No.4 Circuit No.3 Circuit No.1 Circuit No.9 1.450.05 1.2 0.05 18.2MAX 8.80.05 0.6250.05 1.20.05 Card detection switch 1 Card detection switch 2 [GND] Write protect switch 2 GND GND 0.1 30.5MIN 26.10.05 Circuit No.2 3.8750.05 3.1250.05 1.8750.05 11-1.10.05 Write protect switch 1 [GND] 2.50.1 GND Connector outline GND 1.60.05 9.7MAX 14.4750.05 1.60.05 9.7MAX 13.2250.05 Pattern prohibition area 1.3 22.3 25.3 1 3.7 SDK CONNECTOR Reverse Type Connector 9.925 9.075 8.325 7.075 6.725 5.475 5.125 450 Card detection switch 2 Housing, Guide: Heat resisting resin, UL94V-0 Contact: Copper alloy, nickel-undercoated, selective gold-plated Card detection switch: Copper alloy, nickel-undercoated, gold-plated Write protect switch: Copper alloy, nickel-undercoated, selective gold-plated, selective tin-plated (reflow treatment) Card lock, Joint rod, Spring: Stainless Shell: Stainless, nickel-undercoated, selective tin-plated (reflow treatment) 0.4 Circuit No.7 Circuit No.8 Circuit No.4 Circuit No.5 Circuit No.6 Circuit No.2 Circuit No.3 3.125 0.625 Circuit No.9 Circuit No.1 Q'ty / reel Material and Finish 3.875 1.875 Card detection switch 1 Model No. SDKR-9BRS-K13-G-TB 43.7 when releasing a card 35.3 when putting in a card 25.3 8 29.7 34.3 when pushing in a card RoHS compliance This product displays (LF)(SN) on a label. Card center (8.4) 2.8 14.175 27.1 2