40 | 9 | 8 | 7 6 5 4 3 2 4 ASSEMBLY KAPTON TAPE PACKAGING 33,69 20.5 87713-1005 NO TRAY _ E= 2.11 +#0.10 F [010A 87713-1006 YES TAPE & REEL 4.45 0.05 (2X) | ee CIRCUIT #541 W78 CIRCUIT #PI\\ - 41.90 20.05 a -| /- [1905 CIRCUIT #P15 [@[0.15|D|BJA] NOTES: __} ~0,90+0.10(22x) [7.02] A 1-4 OF DATUM B | 4, MATERIAL: LCP, GLASS FILLED, UL 94V-0, COLOR: BLACK | L [ 1.15 TERMINAL: COPPER ALLOY ; ir SS re 2. PLATING: at Tt Pp | CONTACT: 0.764m MIN. SELECTIVE GOLD OVER 1.27km MIN. NICKEL UNDERPLATE E |} R0.30(4x) t SOLDERTAIL: 2.544 MIN. TIN OVER 1.27 bm MIN. NICKEL UNDERPLATE i 3. MOLEX LOGO LOCATED APPROXIMATELY AS SHOWN VK KAPTON TAPE | - 4, MAXIMUM WARPAGE OF 0.13 mm OVER THE LENGTH OF THE CONNECTOR IN ANY 0,40+0.05 (22x) (4x) DIRECTION BEFORE AND AFTER EXPOSURE TO MAX, 260C FOR 10 SECONDS [{o.20p/ab) 0.3040.05x 45 (12) =\[-3 5. PRODUCT SPECIFICATION: PS-87713-016 APPLIES 6. PACKAGING 30 CONNECTORS PER TRAY 36.19 20.15 D Slo201AlB 7. KAPTON TAPE : 11.00mm X 400mm, KAPTON TAPE LOCATION IS CENTERED ALONG THE PART AS SHOWN. TOP SURFACE OF TAPE TO BE FLAT FOR THE PURPOSE OF PICK & PLACE. = (} 60 +0.08 40.43 20.5 [0.20/48 eio.1s lab 38.05 20.15 ~| tm 350 :0.08 b~ 0.50 +0.05x 60 (2X) [@{0.20[D]a/B| [0.15 /D]A/B C 0,35+005x 45 (4X) | | . (4.00) | | 1 1.70 +0.08 KAPTON a nae } TAPE _ an olex \peratz so oq oC qo 81500 J} [& LTT LTTE ml DETAIL? _ = + LAH 1.05 20.06 | 6.00 Rev. F 2009/06/18 3 = = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE w SSS! |sympots) (UNLESS SPECIFIED) MM ONLY NTS METRIC ola PROJECTION < = = = mm INCH DRAWN BY DATE TITLE F 88 8/2/G/-0 [cPLAcES|2---_[4--- HLIM 2005/03/07 SERIAL ATA BACKPLANE Lu S F 3 PLACES [+ --- +--- CHECKED BY DATE SIL WITH 1.05 PEGS Ee &I\G/=0 [2 PLACES[+ 0.20 |[+--- KCLING 2005/04/14 STD HEIGHT, RECEPT., SMT a oO wie WwW 41 PLACE J--- +--- APPROVED BY DATE A q oN Ss \G/=0 ANGULAR + 3 ISKTOH 2005/04/14 Kole MOLEX INCORPORATED in Sg San MATERIAL NO, DOCUMENT NO. SHEET NO. OEE DRAFT WHERE APPLICABLE] SEE TABLE SD-87713-029 10F 5 BOG + WITHIN DIMENSIONS SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B4 |# VA SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 3 7 6 | 5 | 4 | 3 | 2 10 9 8 7 6 5 4 3 2 1 F ( ) 0.05MAX. | TYP. 0.10 MAX. -- TYP, 0.10 MAX. E T (BETWEEN HIGHEST AND LOWEST LEADS) TYP. DETAIL1 DETAIL4 42.73 | 38.73 F } 17.78 [| D 0.45 20.08 (22X) $2.09 +0.08 2,400.08 aoa 2.40 20.08 PCB SITTING PLANE | PCB SITTING PLANE =| 5.20+0.15 140 2008 NS | | S { { 4.92(22X) Cee eee \ 145, MIN | C OF DATUM a G OF LOCATING PEG 99.015 (20x) (14x) 3.49] /- 1.40 #0.15 (2X) CIRCUIT #P4 AND #P12 GROUNDS ONLY ___| SECTION A-A B 2 = = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE w SSS) ay) UNLESS SPECIED) MM ONLY NTS | METRIC |CleRovECTION 4 & S = = mm INCH DRAWN BY DATE TITLE ES RRR|2G7-0 [CPLACESE---_[2-__KHLIN 2005/03/07 SERIAL ATA BACKPLANE eS) 3 PLACES |[t--- | t--~ [CHECKED BY DATE SIL WITH 1.05 PEGS Eo ug \/=0 2 PLACES[+0.20 [+--- _ |KCLING 2005/04/14 STD HEIGHT, RECEPT., SMT aouyyys +PLACE [---. [4+--- APPROVED BY DATE A & 2 SS\"\G/-0 ANGULAR + 3 SKTOH 2005/04/14 Kole MOLEX INCORPORATED ne 3 a a MATERIAL NO. DOCUMENT NO. SHEET NO. Goze DRAFT WHERE APPLICABLE| SEE TABLE SD-87713-029 2.05 5 Mii Oo <I WITHIN bee Ns SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B4 B /\ SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 | 1 Rev. F 2009/06/1840 9 8 7 6 | 5 4 3 | 2 | % 2,60*38 38.73 Le 17.46 @ 2.309% _ \-[3.29 _ Slorola-cB ] 0.10)A[B-c i 7 [ 1.00 { HELE HELELEE CELE a) VA) f f ] 127) yp ee 0.85 20.05 (22x) (6x) (14x) Slo oc /-|7.62}| L To ot UTA ! PCB THICKNESS: 1600.10 mm RECOMMENDED PCB LAYOUT S = = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD NGLE w SSS) ceAy) UNLESS SPECIE) MM ONLY nts | metRIC (OCIA RAIN a = = = mm INCH DRAWN BY DATE TITLE Fo SRR iZIG/7-0 [ZPLACES|E--- _[E- HLIM 2005/03/07 SERIAL ATA BACKPLANE We a 3 PLACES|+ --- _|--~ _ [CHECKED BY DATE SIL_WITH 1.05 PEGS Ee &I\E/=0 [2 PLACES|#0.20 |[+--- CLING 2005/04/14 STD HEIGHT, RECEPT., SMT aowyy| 7 PLACE |t--- |--- [APPROVED BY DATE aa 2s \&/=0 ANGULAR + 3 ISKTOH 2005/04/14 fold MOLEX INCORPORATED in Sg 2A MATERIAL NO. DOCUMENT NO. SHEET NO. TOR Te DRAFT WHERE APPLICABLE] SEE TABLE SD-87713-029 3 0F 5 Bnoo <I WT RE Es SZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B4 |g JA SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 3 7 | 6 | 5 | 4 | 3 | 2 4 Rev. F 2009/06/1810 8 7 6 5 4 3 2 1 S = = QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE w S55) |symgors| (UNLESS SPECIFIED) MM ONLY NTS METRIC |OC] PROJECTION < = = = mm INCH DRAWN BY DATE TITLE Fo RS /2/G/-0 [c PLACESE--- _[---__KHLIM 2005/03/07 SERIAL ATA BACKPLANE tt 3 a 3 PLACES |/+--- +--- CHECKED BY DATE SIL WITH 1.05 PEGS ra &I\G/=0 [2 PLACES|+0.20 [+--- KCLING 2005/04/14 STD HEIGHT, RECEPT,, SMT Bouyy|W 1 PLACE [E--- |E--- [APPROVED BY DATE Bese ING7-0 ANGULAR 3 @ SKTOH 2005/04/44 iKoldx MOLEX INCORPORATED wi gS Sav MATERIAL NO, DOCUMENT NO. SHEET NO. Porro DRAFT WHERE APPLICABLE] SEE TABLE SD-87713-029 40F 5 BS =< WTR Dees | BE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX B4_ |e INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 8 7 | 6 | 5 | 4 | 3 | 2 1 Rev. F 2009/06/1810 9 8 7 6 5 4 | 3 2 1 TAPE AND REEL PACKAGING -| --2.00 0.15 % 1.50 0 +010 t= 4.00 +0.10 1.75 0.10 PILOT HOLE {PO 0 O OTGG-O 0 0 0 O O-F-O-B-F5 26.20 20.15 43.1520.10 56.00 20.30 | | | | 1 | 52.40 40.10 | | | ! ee oe Ln een oo a mT 00000000000000 64 _ NOTES: , : R3.00 LEADER AND TRAILER TAPE 160 MIN. TOP TAPE TRAILER el 0.8020.05 _| 72" PULL OUT DIRECTION SECTION Z-Z 160 MIN. 230 MIN. TAIL PART LEADER PART DETAIL 3 (EMPTY) (EMPTY) 390 MIN TOP TAPE NON BONDED TAPE 2. PEELING OFF FORCE OF THE TOP TAPE: 80gf MAX. (PEELING DIRECTION AS SHOWN IN FOLLOWING FIGURE) S==] Jouausy) GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS THIRD ANGLE w SS5| naos| UNLESS sPecrieo MM ONLY Nts | METRIC |OCIERERAIN PEEL OFF DIRECTION SSS INCH | DRAWN BY DATE TITLE 1s E228) 2/\67-0 [CPLACESIE=-[E== KLIN 2005/03/07 SERIAL ATA BACKPLANE Se B + + MAX. OO S 3 PLACES|+--- |+--~ [CHECKED BY DATE SIL WITH 1.05 PEGS PULL OUT DIRECTION Ea &IN/=0 [2 PLACES|+ 0.20 |+--- KCLING 2005/04/14 STD HEIGHT, RECEPT., SMT aowey|l TPLACE [E--- |t--- APPROVED BY DATE 3. TAPE AND REEL SPECIFICATION IS AS PER EIA-481. a BSS |\/=0 ANGULAR 32 SKTOH 2005/04/14 Kole MOLEX INCORPORATED 4, TAPE AND REEL QUANTITY : 400 PCS/ REEL. wSSge MATERIAL NO. DOCUMENT NO. SHEET NO, 5. THE TAPE IS TREATED FOR ANTI-STATIC, OES DRAFT RR ATR CABLE SEE TABLE SD-87713-029 5 0F 5 HUSu< WITHIN DIMENSIONS SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX /A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 Rev. F 2009/06/18 +W IN REV 6 | 5 | 4 | 3 | 2 1