78
G3VM-351H
MOS FET Relays
Slim, 2.1 -mm High Rela y Incorporating a
MOS FET Optically Coupled with an
Infrared LED in a Miniature, Flat SOP
Package
• Upgraded G3VM-S3 Series.
• Continuous load current of 110 mA.
• Dielectric strength of 1,500 Vrms between I/O.
■Application Examples
• Broadband systems
• Measurement devices
• Data loggers
• Amusement machines
Note: The actual product is marked differently from the image
shown here.
■List of Models
■Dimensions
Note: All units are in millimeters unless otherwise indicated.
■Terminal Arrangement/Internal Connections (Top View)
■Actual Mounting Pad Dimensions (Recommended Value, Top View)
Contact form Terminals Load voltag e (peak value) Model Number per stick Number per tape
SPST-NO Surface-mounting
terminals 350 VAC G3VM-351H 75 ---
G3VM-351H(TR) --- 2,500
4.4±
0.25
6.3±
0.25
0.4±
0.1
2.54±
0.25
2.1 max.
0.1±
0.1
7.0±
0.4
0.6±
0.3
0.15
G3VM-351H
Note: The actu al prod uct is
marked differently from the image shown Weight: 0.13 g
654
13
2
G3VM-351H
6 to 6.3
1.2
0.8
2.542.54
G3VM-351H
Tel:0755-83003780 Fax:0755-83003794 www.andiantech.com
79
G3VM-351HG3VM-351H
■Absolute Maximum Ratings (Ta = 25°C)
■Electrical Characteristics (Ta = 25°C)
■Recommended Operating Conditions
Use the G3VM under the f ollowing conditions so that the Relay will operate properly.
■Engineering Data
Load Current vs. Ambient Temperature
G3VM-351H
■Safety Precautions
Refe r to page 6 for prec autions com mon to all G3VM models.
Item Symbol Rating Unit Measurement Conditions
Input LED forward current IF50 mA
Repetitive peak LED forward
current IFP 1 A 100 ms pulses, 100 pps
LED forward current reduction
rate D IF/°C-0.5 mA/°CTa ³ 25°C
LED reverse voltage VR5V
Connection temperature Tj125 °C
Output Output dielectric strength VOFF 350 V
Continuous
load current Connection A IO110 mA
Connection B 110
Connection C 220
ON current
reduction
rate
Connection A D ION/°C-1.1 mA/°CTa ³ 25°C
Connection B -1.1
Connection C -2.2
Connection temperature Tj125 °C
Dielectric strength between input and
output (See note 1.) VI-O 1,500 Vrms AC for 1 min
Operating temperature Ta-40 to +85 °C With no ic ing o r conden sation
Storage temperature Tstg -55 to +125 °C With no ic ing o r conden sation
Soldering temperature (10 s) --- 260 °C 10 s
Load
or AC
DC
1
2
3
6
5
4
1
2
3
6
5
4
Load
DC
DC
Load
1
2
3
6
5
4
Connection Diagram
Connection
A
Connection
B
Connection
C
Note: 1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Item Symbol Mini-
mum Typical Maxi-
mum Unit Measurement
conditions
Input LED forward voltage VF1.0 1.15 1.3 V IF = 10 mA
Reverse current IR--- --- 10 mAV
R = 5 V
Capacity between terminals CT--- 30 --- pF V = 0, f = 1 MHz
Trigger LED forward current IFT ---13mAI
O = 110 mA
Output Maximum resi stance
with output ON Connection A RON --- 25 35 WIF = 5 mA,
IO = 110 mA, t < 1 s
--- 35 50 WIF = 5 mA,
IO = 110 mA
Connection B --- 28 40 WIF = 5 mA,
IO = 110 mA
Connection C --- 14 20 WIF = 5 mA,
IO = 220 mA
Current leakage when the relay is
open ILEAK --- --- 1.0 mAV
OFF = 350 V
Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V
Insulation resistance RI-O 1,000 --- --- MWVI-O = 500 VDC,
RoH £ 60%
Turn-ON time tON --- 0.3 1.0 ms IF = 5 mA, RL = 200 W,
VDD = 20 V (See note 2.)
Turn-OFF time tOFF --- 0.1 1.0 ms
VOUT
IF
tON tOFF
10% 90%
IF1
2
6
4
RLVDD
VOUT
Note: 2. Turn-ON and Turn-OFF
Times
Item Symbol Minimum Typical Maximum Unit
Output dielectric strength VDD --- --- 280 V
Operating LED forward current IF51025mA
Continuous load curren t IO--- --- 100 mA
Operating temperature Ta- 20 --- 65 °C
Ambient temperature (°C)
Load current (mA)
Connection A or connection B
250
200
150
100
50
0−20 0 20 40 60 80 100
Connection C
Tel:0755-83003780 Fax:0755-83003794 www.andiantech,com
