MIXERS - DBL-BAL - SMT
9
9 - 278
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC423MS8 / 423MS8E
v02.0705
General Description
Features
Functional Diagram
Electrical Speci cations, TA = +25° C
Typical Applications
The HMC423MS8 / HMC423MS8E is ideal for:
• Base Stations
• Portable Wireless
• CATV/DBS
• ISM
The HMC423MS8 & HMC423MS8E are double bal-
anced mixer ICs with integrated LO ampli ers. This
mixer can operate as an upconverter or downcon-
verter between 0.6 GHz and 1.3 GHz. With the inte-
grated LO ampli er, the mixer requires an LO drive
level of only 0 dBm, and requires only 15mA from a
single positive +3V rail. The mixer has 8 dB of conver-
sion loss, an input P1dB of +8 dBm and an input third
order intercept point of +15 dBm at 1.3 GHz.
Integrated LO Ampli er w/ Pdiss <50 mW
Conversion Loss / Noise Figure: 8 dB
Low LO Drive: 0 dBm
Input IP3: +15 dBm
Single Positive Supply: 3V, 15 mA
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 0.6 - 1.3 GHz
Parameter
IF = 100 MHz
LO = 0 dBm, Vdd = 3V Units
Min. Typ. Max.
Frequency Range, RF & LO 0.6 - 1.3 GHz
Frequency Range, IF DC - 0.4 GHz
Conversion Loss 811dB
Noise Figure (SSB) 811dB
LO to RF Isolation 25 35 dB
LO to IF Isolation 15 25 dB
RF to IF Isolation 12 20 dB
IP3 (Input) 13 15 dBm
1 dB Compression (Idd) 6.5 8 dBm
Supply Current (Idd) 15 mA
* Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz.
MIXERS - DBL-BAL - SMT
9
9 - 279
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Conversion Gain vs.
Temperature @ LO = 0 dBm Isolation @ LO = 0 dBm
IF Bandwidth @ LO = 0 dBm
Return Loss @ LO = 0 dBmConversion Gain vs. LO Drive
Conversion Gain vs. Vdd @ LO = 0 dBm
HMC423MS8 / 423MS8E
v02.0705 GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 0.6 - 1.3 GHz
-20
-15
-10
-5
0
0.4 0.6 0.8 1 1.2 1.4 1.6
+25 C
-40 C
+85 C
CONVERSION GAIN (dB)
FREQUENCY (GHz)
-30
-25
-20
-15
-10
-5
0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
CONVERSION GAIN
RETURN LOSS
RESPONSE (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
0.4 0.6 0.8 1 1.2 1.4 1.6
+2.7V
+3.0V
+3.3V
+5.0V
CONVERSION GAIN (dB)
FREQUENCY (GHz)
-25
-20
-15
-10
-5
0
0.5 1 1.5 2
LO
RF
RETURN LOSS (dB)
FREQUENCY (GHz)
-20
-15
-10
-5
0
0.4 0.6 0.8 1 1.2 1.4 1.6
-4 dBm
-2 dBm
0 dBm
+2 dBm
+4 dBm
CONVERSION GAIN (dB)
FREQUENCY (GHz)
-50
-40
-30
-20
-10
0
0.4 0.6 0.8 1 1.2 1.4 1.6
RF/IF
LO/RF
LO/IF
ISOLATION (dB)
FREQUENCY (GHz)
MIXERS - DBL-BAL - SMT
9
9 - 280
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Input IP3 vs. LO Drive*
Input P1dB vs.
Temperature @ LO = 0 dBm
Input IP3 vs.
Temperature @ LO = 0 dBm*
Harmonics of LO
* Two-tone input power = 0 dBm each tone, 1 MHz spacing.
Upconverter Performance
Conversion Gain @ LO = 0 dBm
MxN Spurious @ IF Port
nLO
mRF01234
0XX5 252726
1120314557
27061704978
3>9289877377
4 >92 >92 >92 >92 >92
RF = 1.0 GHz @ -10 dBm
LO = 0.9 GHz @ 0 dBm
All values in dBc relative to the IF.
Measured as downconverter.
nLO Spur @ RF Port
LO Freq. (GHz) 1 2 3 4
0.7 30 15 42 40
0.85 34 16 50 42
138194852
1.15 40 22 54 58
1.3 42 26 44 59
1.45 39 31 50 60
LO = 0 dBm
All values in dBc below input LO level @ RF port.
HMC423MS8 / 423MS8E
v02.0705 GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 0.6 - 1.3 GHz
-20
-15
-10
-5
0
0.4 0.6 0.8 1 1.2 1.4 1.6
CONVERSION GAIN (dB)
FREQUENCY (GHz)
10
12
14
16
18
20
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3
+25 C
-40 C
+85 C
INPUT IP3 (dBm)
FREQUENCY (GHz)
10
12
14
16
18
20
0.6 0.7 0.8 0.9 1 1.1 1.2 1.3
LO = -2 dBm
LO = 0 dBm
LO = +2 dBm
INPUT IP3 (dBm)
FREQUENCY (GHz)
5
6
7
8
9
10
11
12
13
14
15
0.6 0.8 1 1.2 1.4 1.6
+25 C
-40 C
+85 C
INPUT P1dB (dBm)
FREQUENCY (GHz)
MIXERS - DBL-BAL - SMT
9
9 - 281
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Outline Drawing
Absolute Maximum Ratings
RF / IF Input (Vdd = +3V) +13 dBm
LO Drive (Vdd = +3V) +13 dBm
Vdd +7 Vdc
IF DC Current ±18 mA
Channel Temperature (Tc) 150 °C
Continuous Pdiss (T = 85°C)
(Derate 4.8 mW/°C above 85 C) 0.32 W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC423MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H423
XXXX
HMC423MS8E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] H423
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
HMC423MS8 / 423MS8E
v02.0705 GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 0.6 - 1.3 GHz
MIXERS - DBL-BAL - SMT
9
9 - 282
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Pin Number Function Description Interface Schematic
1LO
This pin is AC coupled and matched to 50 Ohm from
0.6 - 1.3 GHz.
2, 3, 6, 7 GND Pins must connect to RF ground.
4Vdd
Power supply for the LO Ampli er. One external RF bypass
capacitor (10,000 pF) is required.
5IF
This pin is DC coupled. For applications not requiring opera-
tion to DC, this port should be DC blocked externally using a
series capacitor whose value has been chosen to pass the
necessary IF frequency range. For operation to DC, this pin
must not source/sink more than 18 mA of current or die non-
function and possible die failure will result.
8RF
This pin is DC coupled and matched to 50 Ohm from
0.6 - 1.3 GHz
Pin Description
Application Circuit
C1 10,000 pF
L1 4.7 nH
HMC423MS8 / 423MS8E
v02.0705 GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 0.6 - 1.3 GHz
MIXERS - DBL-BAL - SMT
9
9 - 283
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Evaluation PCB
The circuit board used in the nal application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request.
Item Description
J1 - J3 PCB Mount SMA Connector, Johnson
J4, J5 DC Pin
C1 10k pF Chip Capacitor, 0603 Pkg.
L1 4.7 nH Inductor, 0805 Pkg.
U1 HMC423MS8 / HMC423MS8E Mixer
PCB [2] 104964 Evaluation Board, 1.00” x 1.00”
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
List of Materials for Evaluation PCB 105190 [1]
HMC423MS8 / 423MS8E
v02.0705 GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 0.6 - 1.3 GHz
