DATA SHEET
HY2007 240 WATTS
The ILP HY2007 Power Amplifier is a fully
encapsulated high quality power amplifier
with Integral Power Supply and heatsink.
Using the latest Lateral MOSFET's ensures a robust amplifier with excellent sonic
characteristics.
Mounting can be achieved by the use of T-slots in the heatsink and the nuts and
bolts provided.
• FEATURES
• Enhanced specifications
• Integral Power Supply
• Anti-thump Circuitry
• Integral heatsink
• Thermal Protection
• PTH Circuit Board
• Encapsulated
POWER SUPPLY REQUIREMENTS
ILP have developed a Hi-Fi quality Low noise Audio Power Toroidal Transformers
for the HY2007 which is Low Profile with Resin filled centre for maximum noise
absorption and ease of mounting. Finished in black to match the amplifiers this
transformer is the ideal choice to power the HY2007.
Mode Transformer RMS Supply Voltage Size Weight
4Ω AT2404 40 - 0 - 40v 130x55mm 4.0Kg
SPONG LANE ELMSTED ASHFORD KENT TN25 5JU
PHONE +44 (0)1233 750481 FAX +44 (0)1233 750578
TYPICAL SPECIFICATIONS
Parameter Value
Output Power 300W rms. Max
Frequency Response (-3dB) 15Hz - 50kHz
Total Harmonic Distortion @ 1kHz 0.005%
Signal to Noise Ratio (DIN AUDIO) 100dB
Slew Rate typical 50V/µS
Rise Time 5µS
Input Sensitivity 500mV rms.
Input Impedance 100KΩ
Damping Factor(4Ω @ 100Hz) >400
Load Impedance 4Ω
Maximum D.C. rails ±60V
Size Width x Height x Extrusion Cut 190x120x80mm
Weight 1490g
ELECTRICAL / MECHANICAL
DETAILS AND DIMENSIONS
INSTALLATION NOTES
1. For normal us age and conditions the amplifier needs no supplementary heats ink.
2. It must be mounted to allow a vertical flow of air through the fins.
3. No input capacitor is r equired. An internal 100V working capacitor is fitted.
4. For loudspeaker protection i t is recommended t hat a quickblow fuse is mounted
between the output and the speaker. The fuse rating s pecified has been cal culated
to ensure fas t rupture i n t he event of DC being presented t o t he speaker. It is
advised not to use a higher rated fuse.
5. The amplifier is designed for 4Ω loads and a 5A quickblow fus e is recommended.
