SPECIFICATION CONTROL DRAWING 55PC0211 Date WIRE, RADIATION-CROSSLINKED, MODIFIED, ETFE-INSULATED, 07-08-04 GENERAL PURPOSE, LIGHT AIRFRAME This specification sheet forms a part of the latest issue of Raychem Specifiction 55PC. TITLE Revision H INSULATION - RADIATION-CROSSLINKED, MODIFIED ETFE CONDUCTOR - TIN-COATED COPPER CONSTRUCTION DETAILS PART NUMBER 1/ 55PC0211-26-* 55PC0211-24-* 55PC0211-22-* 55PC0211-20-* 55PC0211-18-* 55PC0211-16-* 55PC0211-14-* 55PC0211-12-* 55PC0211-10-* 55PC0211- 8-* 55PC0211- 6-* 55PC0211- 4-* 55PC0211- 2-* 55PC0211- 1-* 55PC0211- 0-* 55PC0211-00-* WIRE CONDUCTOR SIZE STRANDING (AWG) (number x AWG) 26 24 22 20 18 16 14 12 10 8 6 4 2 1 0 00 19 19 19 19 19 19 19 37 37 133 133 133 665 817 1045 1330 x x x x x x x x x x x x x x x x CONDUCTOR DIAMETER ( in.) LOWER SPEC LIMIT TARGET VALUE UPPER SPEC LIMIT .0175 .0225 .0285 .0365 .0452 .0514 .0644 .0825 .1050 .158 .198 .250 .320 .360 .395 .440 .0183 .0233 .0293 .0375 .0464 .0527 .0659 .0845 .1070 .163 .205 .260 .330 .370 .415 .462 .0191 .0241 .0301 .0385 .0476 .0538 .0674 .0865 .1090 .169 .212 .268 .340 .380 .425 .475 38 36 34 32 30 29 27 28 26 29 27 25 30 30 30 30 FINISHED WIRE MAXIMUM RESISTANCE AT 20C LOWER SPEC (ohms/1000 ft.) LIMIT 41.3 26.2 16.2 9.88 6.23 4.81 3.06 2.02 1.26 .701 .445 .280 .183 .152 .116 .091 .0328 .0378 .0438 .0523 .0616 .0690 .0838 .1020 .1252 .188 .233 .300 .370 .410 .449 .505 DIAMETER ( in.) WEIGHT ( lbs/1000 ft. ) TARGET VALUE UPPER SPEC LIMIT TARGET VALUE .0345 .0395 .0455 .0540 .0635 .0710 .0860 .1047 .1290 .196 .242 .311 .383 .424 .466 .525 .0362 .0412 .0472 .0557 .0654 .0730 .0882 .1074 .1328 .203 .251 .322 .397 .438 .483 .545 1.38 1.98 2.90 4.38 6.59 8.37 12.88 19.73 31.12 56.8 89.7 145. 227. 278. 343. 450. UPPERSPEC LIMIT 1.52 2.13 3.06 4.57 6.90 8.70 13.33 20.30 32.13 59.9 94.7 154. 240. 291. 366. 481. WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 150C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level COLOR: White preferred CROSSLINK VERIFICATION: 300 3C for 1 hour IDENTIFICATION AND COLOR STRIPING DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight INSULATION ELONGATION AND TENSILE STRENGTH: SHRINKAGE: 230 3C for 1 hour, 0.125 in.(maximum) in 12 in. Total Insulation, VOLTAGE WITHSTAND TEST (Post Environmental): Elongation, 50% (minimum) 2500 volts (rms) Tensile Strength, 5000 lbf/in (minimum) PART NUMBER: INSULATION FLAWS: The "*" in the part numbers above shall be replaced by Spark Test, 3.0 kV (rms) color code designators. Impulse Dielectric Test, 8.0 kV (peak) 1/ Example: AWG 22, white: 55PC0211-22-9 INSULATION THICKNESS: .008 in. (nominal) total insulation AWG 22, white with black stripe: 55PC0211-22-90 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Page 1 of 1 DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. R Wire & Cable 501 Oakside Avenue Redwood City, CA 94063-3800 Phone: 1-800-227-8816 Fax: 1-650-361-6297