Product family data sheet
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo,
XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS49 REV 3J
Cree® XLamp® MT-G2 EasyWhite® LEDs
PRODUCT DESCRIPTION
The XLamp® MT-G2 EasyWhite® LED
builds on the breakthrough performance
of the original MT-G by increasing lumen
output up to 25%, while providing a small,
uniform, single point source for precise
optical control. The MT-G2 shares the
same mechanical footprint as the
original MT-G, providing customers with
a seamless upgrade path and shortening
the LED luminaire and retrot lamp
design cycle.
MT-G2 LEDs are designed for high-
output, directional lighting applications
and are the ideal replacement for
lighting applications that currently
use inefcient halogen lamps. MT-G2
LEDs are optimized for use in track,
accent, lamp retrot, downlighting and
other applications where color quality,
consistency and optical control are
required.
FEATURES
• Cree EasyWhite color temperatures
from 2700K to 5000K CCT
• 85°C binning and characterization
• Three voltage options: 6V, 9V, 36V
• 80 and 90 minimum CRI options
• Low effective thermal resistance:
1.5°C/W
• High lumen density
• Small, uniform emitting area for
excellent optical control
• Electrically neutral thermal path
• RoHS and REACh compliant
• UL® recognized component
(E349212)
APPLICATIONS
• MR, PAR, BR, AR and other directional
retrot lamps
• Commercial/residential directional
lighting
• General illumination
TABLE OF CONTENTS
Characteristics ...........................................2
Flux Characteristics, Standard Order
Codes, Bins, 6-Volt MT-G2 .........................3
Flux Characteristics, Standard Order
Codes, Bins, 9-Volt MT-G2 .........................4
Flux Characteristics, Standard Order
Codes, Bins, 36-Volt MT-G2 .......................5
Relative Spectral Power Distribution ........6
Relative Luminous Flux vs. Junction
Temperature ...............................................6
Electrical Characteristics ........................... 7
Relative Luminous Flux vs. Current ...........8
Typical Spatial Distribution ......................10
Performance Groups – Brightness .........10
Performance Groups – Chromaticity ......11
Cree EasyWhite® Color Temperatures
Plotted on the 1931 CIE Curve ................12
Bin and Order Code Formats ...................13
Reow Soldering Characteristics ............14
Notes ........................................................15
Mechanical Dimensions ..........................17
Tape and Reel ........................................... 18
Packaging .................................................19
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® mT-G2 EasyWhiTE® LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Viewing angle (FWHM) degrees 115
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
Effective thermal resistance, junction to solder point °C/W 1.5
LED junction temperature °C 150
DC forward current (6V) mA 3000
DC forward current (9V) mA 2000
DC forward current (36V) mA 500
Forward voltage (6V, 1100mA, 85°C) V 5.7
Forward voltage (6V, 1100mA, 25°C) V 7
Forward voltage (9V, 735mA, 85°C) V 8.55
Forward voltage (9V, 735mA, 25°C) V 10.5
Forward voltage (36V, 185mA, 85°C) V 34.2
Forward voltage (36V, 185mA, 25°C) V 42
Temperature coefcient of voltage (6V) mV/°C -4
Temperature coefcient of voltage (9V) mV/°C -6
Temperature coefcient of voltage (36V) mV/°C -26
Reverse voltage (6V) V -5
Reverse current (6V, 9V, 36V) A 0.1
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® mT-G2 EasyWhiTE® LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 15).
• Cree XLamp MT-G2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
• Minimum CRI for standard EasyWhite color temperatures 27F, 27H, 30F, 30H, 35F, 35H is 80.
• Minimum CRI for standard EasyWhite color temperatures, 40F, 40H, 50F, 50H is 70.
• Typical CRI for standard EasyWhite color temperatures 40F, 40H, 50F, 50H is 75.
* Flux values @ 25°C are calculated and for reference only.
mA, T
The following table provides several base order codes for 6-volt XLamp MT-G2 EasyWhite LEDs. For a complete description of the order-
code nomenclature, please reference page 13 of this document.
Color CCT
Range

 2-Step 4-Step
Group 

Flux


Chromaticity
Region Order Code Chromaticity
Region Order Code
Standard
CRI
EasyWhite
5000 K
N0 750 863
50H
MTGBEZ-00-0000-0B00N050H
50F
MTGBEZ-00-0000-0B00N050F
P0 800 920 MTGBEZ-00-0000-0B00P050H MTGBEZ-00-0000-0B00P050F
4000 K
K0 650 748
40H
MTGBEZ-00-0000-0B00K040H
40f
MTGBEZ-00-0000-0B00K040F
M0 700 805 MTGBEZ-00-0000-0B00M040H MTGBEZ-00-0000-0B00M040F
N0 750 863 MTGBEZ-00-0000-0B00N040H MTGBEZ-00-0000-0B00N040F
3500 K
K0 650 748
35H
MTGBEZ-00-0000-0B00K035H
35F
MTGBEZ-00-0000-0B00K035F
M0 700 805 MTGBEZ-00-0000-0B00M035H MTGBEZ-00-0000-0B00M035F
N0 750 863 MTGBEZ-00-0000-0B00N035H MTGBEZ-00-0000-0B00N035F
3000 K
J0 600 690
30H
MTGBEZ-00-0000-0B00J030H
30F
MTGBEZ-00-0000-0B00J030F
K0 650 748 MTGBEZ-00-0000-0B00K030H MTGBEZ-00-0000-0B00K030F
M0 700 805 MTGBEZ-00-0000-0B00M030H MTGBEZ-00-0000-0B00M030F
2700 K
H0 560 644
27H
MTGBEZ-00-0000-0B00H027H
27F
MTGBEZ-00-0000-0B00H027F
J0 600 690 MTGBEZ-00-0000-0B00J027H MTGBEZ-00-0000-0B00J027F
K0 650 748 MTGBEZ-00-0000-0B00K027H MTGBEZ-00-0000-0B00K027F
80 CRI
EasyWhite
5000 K
M0 700 805
50H
MTGBEZ-00-0000-0B0HM050H
50F
MTGBEZ-00-0000-0B0HM050F
N0 750 863 MTGBEZ-00-0000-0B0HN050H MTGBEZ-00-0000-0B0HN050F
4000 K
J0 600 690
40H
MTGBEZ-00-0000-0B0HJ040H
40F
MTGBEZ-00-0000-0B0HJ040F
K0 650 748 MTGBEZ-00-0000-0B0HK040H MTGBEZ-00-0000-0B0HK040F
M0 700 805 MTGBEZ-00-0000-0B0HM040H MTGBEZ-00-0000-0B0HM040F
90 CRI
EasyWhite
3000 K F0 480 552 30H MTGBEZ-00-0000-0B0UF030H 30F MTGBEZ-00-0000-0B0UF030F
G0 520 598 MTGBEZ-00-0000-0B0UG030H MTGBEZ-00-0000-0B0UG030F
2700 K
E0 440 506
27H
MTGBEZ-00-0000-0B0UE027H
27F
MTGBEZ-00-0000-0B0UE027F
F0 480 552 MTGBEZ-00-0000-0B0UF027H MTGBEZ-00-0000-0B0UF027F
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® mT-G2 EasyWhiTE® LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 15).
• Cree XLamp MT-G2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
• Minimum CRI for standard EasyWhite color temperatures 27F, 27H, 30F, 30H, 35F, 35H is 80.
• Minimum CRI for standard EasyWhite color temperatures, 40F, 40H, 50F, 50H is 70.
• Typical CRI for standard EasyWhite color temperatures 40F, 40H, 50F, 50H is 75.
* Flux values @ 25°C are calculated and for reference only.
mA, T
The following table provides several base order codes for 9-volt XLamp MT-G2 EasyWhite LEDs. For a complete description of the order-
code nomenclature, please reference page 13 of this document.
Color CCT
Range

 2-Step 4-Step
Group 

Flux


Chromaticity
Region Order Code Chromaticity
Region Order Code
Standard
CRI
EasyWhite
5000 K
N0 750 863
50H
MTGBEZ-00-0000-0C00N050H
50F
MTGBEZ-00-0000-0C00N050F
P0 800 920 MTGBEZ-00-0000-0C00P050H MTGBEZ-00-0000-0C00P050F
4000 K
K0 650 748
40H
MTGBEZ-00-0000-0C00K040H
40F
MTGBEZ-00-0000-0C00K040F
M0 700 805 MTGBEZ-00-0000-0C00M040H MTGBEZ-00-0000-0C00M040F
N0 750 863 MTGBEZ-00-0000-0C00N040H MTGBEZ-00-0000-0C00N040F
3500 K
K0 650 748
35H
MTGBEZ-00-0000-0C00K035H
35F
MTGBEZ-00-0000-0C00K035F
M0 700 805 MTGBEZ-00-0000-0C00M035H MTGBEZ-00-0000-0C00M035F
N0 750 863 MTGBEZ-00-0000-0C00N035H MTGBEZ-00-0000-0C00N035F
3000 K
J0 600 690
30H
MTGBEZ-00-0000-0C00J030H
30F
MTGBEZ-00-0000-0C00J030F
K0 650 748 MTGBEZ-00-0000-0C00K030H MTGBEZ-00-0000-0C00K030F
M0 700 805 MTGBEZ-00-0000-0C00M030H MTGBEZ-00-0000-0C00M030F
2700 K
H0 560 644
27H
MTGBEZ-00-0000-0C00H027H
27F
MTGBEZ-00-0000-0C00H027F
J0 600 690 MTGBEZ-00-0000-0C00J027H MTGBEZ-00-0000-0C00J027F
K0 650 748 MTGBEZ-00-0000-0C00K027H MTGBEZ-00-0000-0C00K027F
80 CRI
EasyWhite
5000 K
M0 700 805
50H
MTGBEZ-00-0000-0C0HM050H
50F
MTGBEZ-00-0000-0C0HM050F
N0 750 863 MTGBEZ-00-0000-0C0HN050H MTGBEZ-00-0000-0C0HN050F
4000 K
J0 600 690
40H
MTGBEZ-00-0000-0C0HJ040H
40F
MTGBEZ-00-0000-0C0HJ040F
K0 650 748 MTGBEZ-00-0000-0C0HK040H MTGBEZ-00-0000-0C0HK040F
M0 700 805 MTGBEZ-00-0000-0C0HM040H MTGBEZ-00-0000-0C0HM040F
90 CRI
EasyWhite
3000 K F0 480 552 30H MTGBEZ-00-0000-0C0UF030H 30F MTGBEZ-00-0000-0C0UF030F
G0 520 598 MTGBEZ-00-0000-0C0UG030H MTGBEZ-00-0000-0C0UG030F
2700 K
E0 440 506
27H
MTGBEZ-00-0000-0C0UE027H
27F
MTGBEZ-00-0000-0C0UE027F
F0 480 552 MTGBEZ-00-0000-0C0UF027H MTGBEZ-00-0000-0C0UF027F
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® mT-G2 EasyWhiTE® LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI
measurements. See the Measurements section (page 15).
• Cree XLamp MT-G2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than
the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions
specied by the order code.
• Minimum CRI for standard EasyWhite color temperatures 27F, 27H, 30F, 30H, 35F, 35H is 80.
• Minimum CRI for standard EasyWhite color temperatures, 40F, 40H, 50F, 50H is 70.
• Typical CRI for standard EasyWhite color temperatures 40F, 40H, 50F, 50H is 75.
* Flux values @ 25°C are calculated and for reference only.
mA, T
The following table provides several base order codes for 36-volt XLamp MT-G2 EasyWhite LEDs. For a complete description of the order-
code nomenclature, please reference page 13 of this document.
Color CCT
Range

 2-Step 4-Step
Group 

Flux


Chromaticity
Region Order Code Chromaticity
Region Order Code
Standard
CRI
EasyWhite
5000 K
N0 750 863
50H
MTGBEZ-00-0000-0N00N050H
50F
MTGBEZ-00-0000-0N00N050F
P0 800 920 MTGBEZ-00-0000-0N00P050H MTGBEZ-00-0000-0N00P050F
4000 K
K0 650 748
40H
MTGBEZ-00-0000-0N00K040H
40F
MTGBEZ-00-0000-0N00K040F
M0 700 805 MTGBEZ-00-0000-0N00M040H MTGBEZ-00-0000-0N00M040F
N0 750 863 MTGBEZ-00-0000-0N00N040H MTGBEZ-00-0000-0N00N040F
3500 K
K0 650 748
35H
MTGBEZ-00-0000-0N00K035H
35F
MTGBEZ-00-0000-0N00K035F
M0 700 805 MTGBEZ-00-0000-0N00M035H MTGBEZ-00-0000-0N00M035F
N0 750 863 MTGBEZ-00-0000-0N00N035H MTGBEZ-00-0000-0N00N035F
3000 K
J0 600 690
30H
MTGBEZ-00-0000-0N00J030H
30F
MTGBEZ-00-0000-0N00J030F
K0 650 748 MTGBEZ-00-0000-0N00K030H MTGBEZ-00-0000-0N00K030F
M0 700 805 MTGBEZ-00-0000-0N00M030H MTGBEZ-00-0000-0N00M030F
2700 K
H0 560 644
27H
MTGBEZ-00-0000-0N00H027H
27F
MTGBEZ-00-0000-0N00H027F
J0 600 690 MTGBEZ-00-0000-0N00J027H MTGBEZ-00-0000-0N00J027F
K0 650 748 MTGBEZ-00-0000-0N00K027H MTGBEZ-00-0000-0N00K027F
80 CRI
EasyWhite
5000 K
M0 700 805
50H
MTGBEZ-00-0000-0N0HM050H
50F
MTGBEZ-00-0000-0N0HM050F
N0 750 863 MTGBEZ-00-0000-0N0HN050H MTGBEZ-00-0000-0N0HN050F
4000 K
J0 600 690
40H
MTGBEZ-00-0000-0N0HJ040H
40F
MTGBEZ-00-0000-0N0HJ040F
K0 650 748 MTGBEZ-00-0000-0N0HK040H MTGBEZ-00-0000-0N0HK040F
M0 700 805 MTGBEZ-00-0000-0N0HM040H MTGBEZ-00-0000-0N0HM040F
90 CRI
EasyWhite
3000 K F0 480 552 30H MTGBEZ-00-0000-0N0UF030H 30F MTGBEZ-00-0000-0N0UF030F
G0 520 598 MTGBEZ-00-0000-0N0UG030H MTGBEZ-00-0000-0N0UG030F
2700 K
E0 440 506
27H
MTGBEZ-00-0000-0N0UE027H
27F
MTGBEZ-00-0000-0N0UE027F
F0 480 552 MTGBEZ-00-0000-0N0UF027H MTGBEZ-00-0000-0N0UF027F
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® mT-G2 EasyWhiTE® LED
mmmA; TJ
The following graph represents typical spectral output of the XLamp MT-G2 EasyWhite LED.
mmm
The following graph represents typical performance of the XLamp MT-G2 EasyWhite LED.
Relative Spectral Power Distribution White
The following graph represents typical spectral output of each die of the MT-G Gen II
Cool white to be added
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power (%)
Wavelength (nm)
Warm White
Neutral White
The following graph represents typical performance of each LED die in the XLamp MT-G Gen II
Relative Flux Output vs. Junction Temperature (If = 1100 mA, or 183.33 if @ 36V)
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® mT-G2 EasyWhiTE® LED
ELECTRICAL CHARACTERISTICS (TJ
Electrical Characteristics (Tsp = 85ºC) 6V
0
500
1000
1500
2000
2500
3000
5.00 5.25 5.50 5.75 6.00 6.25
Current (mA)
Forward Voltage V
MT-G2 6V
Electrical Characteristics (Tsp = 85ºC) 9V
0
400
800
1200
1600
2000
7.75 8.00 8.25 8.50 8.75 9.00 9.25
Current (mA)
Forward Voltage V
MT-G2 9V
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® mT-G2 EasyWhiTE® LED
ELECTRICAL CHARACTERISTICS (TJ
RELATIVE LUMINOUS FLUX VS. CURRENT (TJ
Electrical Characteristics (Tsp = 85ºC) 36V
0
50
100
150
200
250
300
350
400
450
500
31 32 33 34 35 36 37
Current (mA)
Forward Voltage V
MT-G2 36V
Relative Intensity vs. Current (Tsp = 85ºC) - 6 V
0%
50%
100%
150%
200%
250%
0500 1000 1500 2000 2500 3000
Relative Luminous Flux (%)
Forward Current, Pulsed (mA)
MT-G2 6V
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® mT-G2 EasyWhiTE® LED
RELATIVE LUMINOUS FLUX VS. CURRENT (TJ
Relative Intensity vs. Current (Tsp = 85ºC) 9 V
0%
50%
100%
150%
200%
250%
0 400 800 1200 1600 2000
Relative Luminous Flux (%)
Forward Current, Pulsed (mA)
MT-G2 9V
Relative Intensity vs. Current (Tsp = 85ºC) 36 V
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® mT-G2 EasyWhiTE® LED
TYPICAL SPATIAL DISTRIBUTION
The following graph represents typical performance of the XLamp MT-G2 EasyWhite LED.
PERFORMANCE GROUPS – BRIGHTNESS (TJ
XLamp MT-G2 EasyWhite LEDs are tested for luminosity and placed into one of the following bins.
Group Code Minimum Luminous Flux
@ Nominal IF
Maximum Luminous Flux
@ Nominal IF
D0 400 440
E0 440 480
F0 480 520
G0 520 560
H0 560 600
J0 600 650
K0 650 700
M0 700 750
N0 750 800
P0 800 860
Spatial Distribution MT-G2
0
20
40
60
80
100
-90 -60 -30 030 60 90
Relative Luminous Intensity (%)
Angle (º)
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® mT-G2 EasyWhiTE® LED
PERFORMANCE GROUPS – CHROMATICITY (TJ
XLamp MT-G2 EasyWhite LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
EasyWhite Color Temperatures – 4-Step
Code CCT x y
50F 5000 K
0.3407 0.3459
0.3415 0.3586
0.3499 0.3654
0.3484 0.3521
40F 4000 K
0.3744 0.3685
0.3782 0.3837
0.3912 0.3917
0.3863 0.3758
35F 3500 K
0.3981 0.3800
0.4040 0.3966
0.4186 0.4037
0.4116 0.3865
30F 3000 K
0.4242 0.3919
0.4322 0.4096
0.4449 0.4141
0.4359 0.3960
27F 2700 K
0.4475 0.3994
0.4573 0.4178
0.4695 0.4207
0.4589 0.4021
EasyWhite Color Temperatures – 2-Step
Code CCT x y
50H 5000 K
0.3429 0.3507
0.3434 0.3571
0.3475 0.3604
0.3469 0.3539
40H 4000 K
0.3784 0.3741
0.3804 0.3818
0.3867 0.3857
0.3844 0.3778
35H 3500 K
0.4030 0.3857
0.4061 0.3941
0.4132 0.3976
0.4099 0.3890
30H 3000 K
0.4291 0.3973
0.4333 0.4062
0.4395 0.4084
0.4351 0.3994
27H 2700 K
0.4528 0.4046
0.4578 0.4138
0.4638 0.4152
0.4586 0.4060
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® mT-G2 EasyWhiTE® LED
CREE EASYWHITE® COLOR TEMPERATURES PLOTTED ON THE 1931 CIE CURVE (TJ
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
5700 K
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI C78.377 Quadrangle
EasyWhite 4-step
EasyWhite 2-step
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® mT-G2 EasyWhiTE® LED
BIN AND ORDER CODE FORMATS
Bin codes and order codes are congured as follows:
Order Code Bin Code
SSSCCC-BB-WWW-FF-VVRAAAA
Series
MTG = MT-G
Internal code
Flux bin
CRI Specification
B = 70 min CRI
H = 80 min CRI
U = 90 min CRI
Internal Code
Vf class:
B0 = 6-V class
C0 = 9-V class
N0 = 36-V class
Chromaticity bin
Color
BEZ = EasyWhite
SSSCCC-BZ-HHHH-HVVRNNNNN
Series
MTG = MT-G
Internal code
CRI Specification
H = 80 min CRI (4000 K & 5000 K)
U = 90 min CRI (2700 K & 3000 K)
0 = Standard CRI
Kit code
Vf class
B0 = 6-V class
C0 = 9-V class
N0 = 36-V class
Reel size
0 = 500 (standard)
1 = 100 (non-standard)
Color
BEZ = EasyWhite
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp® mT-G2 EasyWhiTE® LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp MT-G2 EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As
a general guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder
paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp) 1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax)170 °C
Preheat: Time (tsmin to tsmax) 65-150 seconds
Time Maintained Above: Temperature (TL)217 °C
Time Maintained Above: Time (tL) 45-90 seconds
Peak/Classication Temperature (Tp) 235 - 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 - 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
IPC/JEDEC J-STD-020C
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp® mT-G2 EasyWhiTE® LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.

Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specic LM-80 data sets available for this LED, refer to the public LM-80 results document.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp MT-G2 EasyWhite LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited
oor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered
LEDs in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has
published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon
request.
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp® mT-G2 EasyWhiTE® LED
NOTES - CONTINUED
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp® mT-G2 EasyWhiTE® LED
MECHANICAL DIMENSIONS
Thermal vias, if present, are not shown on these drawings.
All measurements are ±.13 mm unless otherwise indicated.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
8.90
8.90
6.00
.95
.95
.50
.50
9.11
9.11
R4.10
.65
4.85
±.25
8.90
REF.
8.90
REF.
.95
.50
6.00
8.90
8.90
8.90
8.90
.30
.95 .95
1.35 .25
.58
1.35
1.23
.25
1/19.000
B
2610-00025
MT-G2 OUTLINE
5/14/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A INITIAL RELEASE DC 5/14/12
BADDED ALTERNATE VIEW/UPDATED STENCIL
DC 8/19/15
RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
8.90
REF.
8.90
REF.
Side View
Top View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
8.90
8.90
6.00
.95
.95
.50
.50
9.11
9.11
R4.10
.65
4.85
±.25
8.90
REF.
8.90
REF.
.95
.50
6.00
8.90
8.90
8.90
8.90
.30
.95 .95
1.35 .25
.58
1.35
1.23
.25
1/19.000
B
2610-00025
MT-G2 OUTLINE
5/14/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A INITIAL RELEASE DC 5/14/12
B ADDED ALTERNATE VIEW/UPDATED STENCIL
DC 8/19/15
RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
8.90
REF.
8.90
REF.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
8.90
8.90
6.00
.95
.95
.50
.50
9.11
9.11
R4.10
.65
4.85
±.25
8.90
REF.
8.90
REF.
.95
.50
6.00
8.90
8.90
8.90
8.90
.30
.95 .95
1.35 .25
.58
1.35
1.23
.25
1/19.000
B
2610-00025
MT-G2 OUTLINE
5/14/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A INITIAL RELEASE DC 5/14/12
BADDED ALTERNATE VIEW/UPDATED STENCIL
DC 8/19/15
RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
8.90
REF.
8.90
REF.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
8.90
8.90
6.00
.95
.95
.50
.50
9.11
9.11
R4.10
.65
4.85
±.25
8.90
REF.
8.90
REF.
.95
.50
6.00
8.90
8.90
8.90
8.90
.30
.95 .95
1.35 .25
.58
1.35
1.23
.25
1/19.000
B
2610-00025
MT-G2 OUTLINE
5/14/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A INITIAL RELEASE DC 5/14/12
B ADDED ALTERNATE VIEW/UPDATED STENCIL
DC 8/19/15
RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
8.90
REF.
8.90
REF.
Alternate Bottom View
Bottom View
Anode
Alternate Bottom View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
8.90
8.90
6.00
.95
.95
.50
.50
9.11
9.11
R4.10
.65
4.85
±.25
8.90
REF.
8.90
REF.
.95
.50
6.00
8.90
8.90
8.90
8.90
.30
.95 .95
1.35 .25
.58
1.35
1.23
.25
1/19.000
B
2610-00025
MT-G2 OUTLINE
5/14/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A INITIAL RELEASE DC 5/14/12
B ADDED ALTERNATE VIEW/UPDATED STENCIL
DC 8/19/15
RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
8.90
REF.
8.90
REF.
Anode
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
8.90
8.90
6.00
.95
.95
.50
.50
9.11
9.11
R4.10
.65
4.85
±.25
8.90
REF.
8.90
REF.
.95
.50
6.00
8.90
8.90
8.90
8.90
.30
.95 .95
1.35 .25
.58
1.35
1.23
.25
1/19.000
B
2610-00025
MT-G2 OUTLINE
5/14/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A INITIAL RELEASE DC 5/14/12
B ADDED ALTERNATE VIEW/UPDATED STENCIL
DC 8/19/15
RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
8.90
REF.
8.90
REF.
Anode
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
8.90
8.90
6.00
.95
.95
.50
.50
9.11
9.11
R4.10
.65
4.85
±.25
8.90
REF.
8.90
REF.
.95
.50
6.00
8.90
8.90
8.90
8.90
.30
.95 .95
1.35 .25
.58
1.35
1.23
.25
1/19.000
B
2610-00025
MT-G2 OUTLINE
5/14/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A INITIAL RELEASE DC 5/14/12
B ADDED ALTERNATE VIEW/UPDATED STENCIL
DC 8/19/15
RECOMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ±.13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
8.90
REF.
8.90
REF.
Recommended PCB Solder Pad Recommended Stencil Pattern

Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp® mT-G2 EasyWhiTE® LED
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
X° ± .5 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .01
.XXX ± .005
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTANED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
SURFACE FINISH:
63
330
+.25
-.75
12.4
+1.0
-.5
MEASURED AT EDGE
16.4
+0.2
.0
MEASURED AT HUB
12.4
+.2
.0
MEASURED AT HUB
±.213.1
1.9±.4
±.421
60° 60°
1/10.500
A
2400-00009
REEL, 13" X 12MM, 3 PIECE SNAP
-
ANTI-STATIC HIPS
----
----
09/29/09D. CRONIN
2400-00009
INDEX QTY ITEM COMMENTS
1 1 2400-00009-CORE
2 2 2400-00009-REEL
REVISONS
REV DESCRIPTION BY DATE APP'D
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
Trailer
160mm (min) of
empty pockets
sealed with tape
(15 pockets min.)
Loaded Pockets
(500 Lamps)
12±.1
5.25
16
+.3
-.0
1.75
±.10
4±.10
Leader
400mm (min) of
empty pockets
sealed with tape
(35 pockets min.)
9.4
1/13.000
A
2402-00022
MTG LOADING SPEC
--
--
----
----
5/14/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
A Initial Release DC
5/14/12
END START
User Feed Direction
CATHODE SIDE
ANODE SIDE
1.5± .1
Copyright © 2012-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree,
Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp® mT-G2 EasyWhiTE® LED
PACKAGING
Label with Cree Bin
Code, Qty, Lot # Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Dessicant
(inside bag)
Humidity Indicator
Card (inside bag)
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
Patent Label
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cree, Inc.:
MTGBEZ-00-0000-0B00J030H MTGBEZ-00-0000-0B00K035F MTGBEZ-00-0000-0B00M030H MTGBEZ-00-0000-
0B0UE027F MTGBEZ-00-0000-0B0UF030H MTGBEZ-00-0000-0C00J027F MTGBEZ-00-0000-0C00K027F
MTGBEZ-00-0000-0C00K030H MTGBEZ-00-0000-0C00M030H MTGBEZ-00-0000-0C00M035F MTGBEZ-00-0000-
0C0HM040F MTGBEZ-00-0000-0C0HM040H MTGBEZ-00-0000-0C0UG030H MTGBEZ-00-0000-0N00H027F
MTGBEZ-00-0000-0N00H027H MTGBEZ-00-0000-0N00J027F MTGBEZ-00-0000-0N00K027F MTGBEZ-00-0000-
0N00N035F MTGBEZ-00-0000-0N00N050H MTGBEZ-00-0000-0N0HN050F MTGBEZ-00-0000-0X00K030H
MTGBEZ-00-0000-0X00N050F MTGBEZ-00-0000-0X0HN050H MTGBEZ-00-0000-0X0UE027F MTGBEZ-00-0000-
0X0UF027F MTGBEZ-00-0000-0X0UG030F MTGBEZ-01-0000-0B0HK040H MTGBEZ-01-0000-0B0HM040F
MTGBEZ-01-0000-0B0UG030H MTGBEZ-01-0000-0C00H027H MTGBEZ-01-0000-0C00J027F MTGBEZ-01-0000-
0C00K030H MTGBEZ-01-0000-0C00M030F MTGBEZ-01-0000-0C00N050F MTGBEZ-01-0000-0C0HK040H
MTGBEZ-01-0000-0C0UE027H MTGBEZ-01-0000-0C0UF030H MTGBEZ-01-0000-0C0UG030F MTGBEZ-01-0000-
0N00J027F MTGBEZ-01-0000-0N00J030H MTGBEZ-01-0000-0N00K040F MTGBEZ-01-0000-0N00M030F MTGBEZ-
01-0000-0N00M030H MTGBEZ-01-0000-0N00N040F MTGBEZ-01-0000-0N00P050F MTGBEZ-01-0000-0N0HJ040F
MTGBEZ-01-0000-0N0HK040H MTGBEZ-01-0000-0N0HM040H MTGBEZ-01-0000-0N0HM050H MTGBEZ-01-0000-
0N0UE027H MTGBEZ-01-0000-0X00J027H MTGBEZ-01-0000-0X0HJ040H MTGBEZ-01-0000-0X0HM050H
MTGBEZ-01-0000-0X0UG030F MTGBEZ-01-0000-0X00N050H MTGBEZ-01-0000-0B00M030F MTGBEZ-00-0000-
0B00N035F MTGBEZ-00-0000-0X00K035F MTGBEZ-01-0000-0C0UE027F MTGBEZ-01-0000-0X00J030F MTGBEZ-
00-0000-0B00M035F MTGBEZ-00-0000-0B0UF027H MTGBEZ-01-0000-0B00H027H MTGBEZ-01-0000-0N0HK040F
MTGBEZ-00-0000-0N0HK040H MTGBEZ-01-0000-0B00J030H MTGBEZ-01-0000-0N00N050F MTGBEZ-00-0000-
0B00K040F MTGBEZ-00-0000-0X0HM050H MTGBEZ-01-0000-0X0HM040H MTGBEZ-01-0000-0B0HM050F
MTGBEZ-01-0000-0B0UF027F MTGBEZ-01-0000-0N00N050H MTGBEZ-00-0000-0C0UF027H MTGBEZ-01-0000-
0B00P050H MTGBEZ-00-0000-0X0UF030F MTGBEZ-00-0000-0X00K030F MTGBEZ-01-0000-0X00P050F
MTGBEZ-01-0000-0X00N050F MTGBEZ-01-0000-0X0UF027F MTGBEZ-01-0000-0N00H027F MTGBEZ-01-0000-
0C00N050H MTGBEZ-00-0000-0C0UF030F MTGBEZ-00-0000-0N00K030H MTGBEZ-01-0000-0N00K030F
MTGBEZ-00-0000-0C00K027H MTGBEZ-00-0000-0B00J027H MTGBEZ-00-0000-0X00H027F MTGBEZ-01-0000-
0C0HK040F MTGBEZ-00-0000-0B00M030F MTGBEZ-01-0000-0N00K027F MTGBEZ-00-0000-0B00J027F
MTGBEZ-00-0000-0B00P050F MTGBEZ-00-0000-0X0HK040H MTGBEZ-00-0000-0N00K030F MTGBEZ-00-0000-
0N00M035F MTGBEZ-00-0000-0C0HK040F MTGBEZ-00-0000-0C0HJ040H MTGBEZ-01-0000-0X0UF030H
MTGBEZ-01-0000-0B00K027H