Office automation equipment, instrumentation equipment, communications
equipment, factory automation, etc.
Rated voltage
Rated current
Insulation resistance
Dielectric withstanding
voltage
Contact resistance
250V AC (r.m.s.)
1 A
Over 1000 megohms at 100V DC
750V AC (r.m.s.) for PCS series
500V AC (r.m.s.) for PCS-XE series
35 milliohms or less (not applicable to some products)
PCS series
1.27 mm Pitch Connectors
Outline
Features
Principal
Applications
Electrical
Characteristics
PCS series provides various 1.27 mm pitch smaller-sized high density
interface connectors specifically designed for downsized electronic
equipment.
• 20 - 96 contacts for board-to-cable connectors
• Results in substantial labor saving; IDC type connection is standard for
cables. (AWG #28 or #30)
• Soldering type connectors available
• EMI-filtered design to meet FCC and other standards
• Backshell has a robust interface structure.
• Quick locking with metal latch
• Panel-to-cable connectors available
• Accessory is available for preventing connector misinsertion.
• 34 - 150 contacts for board-to-cable connectors.
• Even with many contacts, connectors can be easily inserted or extracted
due to a low insertion force design.
• Drainage structure ensures cleaning solution does not remain in the
housing during flux removal. (For molded type male connectors)
mm Pitch
1.27
Connectors
Document Disclaimer
When placing orders with us, minimum order quantities are set for every product.
Be sure to contact us before starting preliminary design of PCBs using our connectors.
The specifications and information shown in the catalog are subject to change without notice.
Reflow temperature profile
(for reference purposes)
Flow temperature profile
(for reference purposes)
The reflow temperature profile shown in this drawing is for reference
purposes. This profile depends on requirements such as reflow
equipment, soldering paste, and PCB size. Thus, this profile may not
meet with your specific situation. Please evaluate your PCB-mounting
soldering and set your own reflow temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
The flow temperature profile as shown above is for reference
purposes. This profile depends on requirements such as the PCB size.
Thus, this profile may not meet with your specific situation. Please
evaluate your PCB-mounting soldering and set your own flow
temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
PCS-XE( )SLFYTU( )+ PCS series through hole type connector
100~130˚C
260±5˚C
30~60sec
5sec
130~150˚C
250˚C
220˚C
(Peak)
(Full heating
period)
30sec
(Preheating period)
60~120sec
Panel mounting-hole dimensions for reference purposes
Dimensions of connector mounting for reference purposes
A
35 or more
40 or more
45.1 or more
54 or more
65.4 or more
73 or more
83.2 or more
35.5 or more
40.5 or more
46.2 or more
51.2 or more
BC
20
28
36
50
68
80
96
Number of
contacts
Number of
contacts
A
27.4
32.5
37.6
46.5
57.9
65.5
75.69
B
23.7
28.8
33.9
42.8
54.2
61.8
72.0
C
11.3
16.3
20.3
30.3
40.3
50.3
20
28
36
50
68
80
96
10 or more
Panel thickness:
t=1.6 mm MAX.
In the case of using a mating guide
PCS-( )MD+ PCS-( )FD+
PCS-( )MD+ PCS-( )LFD+
PCS-( )LMD+ PCS-( )FD+
PCS-( )LMD+ PCS-( )LFD+
A
C
B
2.7
14.9
21.3
20.215
22.215
23.1
29.5
27.53
A
B
R1.4
7.5
2.8
A
B
C
R1.4
7.5
15
2.8
(In the case of PCS-E type)
Board-to-board connector dimensions for reference purposes
Board-to-cable connector dimensions for reference purposes (In the case of spring-locked type)
Edge of PCB
Product List
Straight through hole type
male connector for PCB
PCS-( )MD+
B-10PCS
PCS series...8
Straight through hole type
female connector for PCB
PCS-( )FD+
B-11PCS
PCS series...9
Right-angle through hole type
male connector for PCB
PCS-( )LMD+
B-12PCS
PCS series...10
Right-angle through hole type
female connector for PCB
PCS-( )LFD+
B-13PCS
PCS series...11
Right-angle through hole type
male connector for PCB
PCS-128LMDT-GP+
B-14PCS
PCS series...12
Right-angle through hole type
female connector for PCB
PCS-128LFDT-GP+
B-15PCS
PCS series...13
Straight through hole type
male connector for PCB
PCS-E( )MD+
B-16PCS
PCS series...14
Right-angle through hole type
male connector for PCB
PCS-E( )LMD+
B-17PCS
PCS series...15
IDC type female connector
for cable
PCS-E( )F( )
B-18PCS
PCS series...16
Soldering type female connector
for cable
PCS-E( )FS+
B-19PCS
PCS series...17
IDC type male connector
for panel
PCS-E( )PM( )-( )
B-20PCS
PCS series...18
IDC type male connector
for cable
PCS-D( )( )MA1( )+
B-21PCS
PCS series...19
IDC type female connector
for cable
PCS-D68( )FA1( )+
B-22PCS
PCS series...20
Straight through hole type
female connector for PCB
PCS-XE( )SFD( )( )+
B-23PCS
PCS series...21
Straight through hole type
female connector for PCB
PCS-XE( )SFD( )N( )+
B-24PCS
PCS series...22
Right-angle through hole type
female connector for PCB
PCS-XE( )LFD( )( )+
B-25PCS
PCS series...23
Right-angle through hole type
female connector for PCB
PCS-XE68LFDT( )N( )+
B-26PCS
PCS series...24
Right-angle through hole type
female connector for PCB
PCS-XE100LFD( )-( )+
B-27PCS
PCS series...25
Right-angle through hole type
female connector for PCB
PCS-XE( )SLFD( )( )+
B-28PCS
PCS series...26
Right-angle through hole type
female connector for PCB
PCS-XE( )SLFDT( )( )+
B-29PCS
PCS series...27
PCS
Right-angle through hole type
female connector for PCB
PCS-XE( )SLFD( )N( )+
B-30PCS
PCS series...28
Right-angle through hole type
female connector for PCB
PCS-XE( )SLFDT( )N( )+
B-31PCS
PCS series...29
Right-angle SMT type
female connector for PCB
PCS-XE( )SLFYTU( )+
B-32PCS
PCS series...30
Straight Press-in type
female connector for PCB
PCS-XE50SFP( )( )
B-33PCS
PCS series...31
IDC type male connector
for cable
PCS-XE( )M( )( )+
B-34PCS
PCS series...32
Soldering type male connector
for cable
PCS-XES68MS+
B-35PCS
PCS series...33
IDC type female connector
for panel
PCS-XE( )SPF( )1UN( )
B-36PCS
PCS series...34
IDC type female connector
for panel
PCS-XE( )SPF( )( )( )
B-37PCS
PCS series...35
IDC type female connector
for panel
PCS-XED( )( )FA( )( )+
B-38PCS
PCS series...36
IDC type female connector
for panel
PCS-XED68( )FAUN( )+
B-39PCS
PCS series...37
EMI-filtered vertical type
die-cast material backshell
for standard cable
PCS-E( )L( )
B-40PCS
PCS series...38
Vertical type die-cast
material backshell
for larger diameter cable
PCS-E( )LK
B-41PCS
PCS series...39
Mating guide structure vertical type
die-cast material backshell
for standard cable
PCS-E( )LG( )
B-42PCS
PCS series...40
Horizontal type
die-cast material backshell
for standard cable
PCS-E( )W
B-43PCS
PCS series...41
Vertical type plastic backshell
for flat cable
PCS-E( )LT+
B-44PCS
PCS series...42
Vertical type
die-cast material backshell
for cable extension
PCS-E( )PML( )
B-45PCS
PCS series...43
Vertical type die-cast material backshell
for standard cable with provision
for preventing misinsertion
PCS-E( )LP( )-( )+R
B-46PCS
PCS series...44
Vertical type die-cast material backshell
for larger diameter cable with provision
for preventing misinsertion
PCS-E( )LKP( )-( )+R
B-47PCS
PCS series...45
Vertical type die-cast material backshell
for larger diameter cable with mating guide
for preventing misinsertion
PCS-E96LKP( )-( )+R
B-48PCS
PCS series...46
Vertical type die-cast material backshell
for larger diameter cable with provision
for preventing misinsertion
PCS-E96LKP1A-( )+R
B-49PCS
PCS series...47
PCS
Vertical type die-cast material backshell
for standard cable with mating guide
for preventing misinsertion
PCS-E( )LGP( )-( )+R
B-50PCS
PCS series...48
Horizontal type die-cast material backshell
for standard cable with provision
for preventing misinsertion
PCS-E( )WSP-( )+R
B-51PCS
PCS series...49
Horizontal type die-cast material backshell
for larger diameter cable with provision
for preventing misinsertion
PCS-E( )WKP( )-( )+R
B-52PCS
PCS series...50
Horizontal type die-cast material backshell
for larger diameter cable with provision
for preventing misinsertion
PCS-E96WKP( )-( )+R
B-53PCS
PCS series...51
Vertical type die-cast material backshell
for flat cable with provision
for preventing misinsertion
PCS-E( )LTP-( )+R
B-54PCS
PCS series...52
Vertical type
die-cast material backshell
for larger diameter cable
PCS-E68LKAU2N
B-55PCS
PCS series...53
Vertical type
over-molded backshell
PCS-XEM( )DL( )( )N
B-56PCS
PCS series...54
Vertical type
over-molded backshell
PCS-XEM100L( )( )
B-57PCS
PCS series...55
Vertical type
die-cast material backshell
for daisy chain connection
PCS-SE68LDAU2N
B-58PCS
PCS series...56
Dust-proof cap
PCS-68C
B-59PCS
PCS series...57
Dust-proof cap
PCS-E( )C( )
B-60PCS
PCS series...58
Dust-proof cap
PCS-E( )CP( )
B-61PCS
PCS series...59
1.6 mm panel-thickness mating
guide
PCS-E( )G
B-62PCS
PCS series...60
1.0 mm panel-thickness mating
guide
PCS-E( )G1
B-63PCS
PCS series...61
Metallic mating guide
PCS-E( )G3( )
B-64PCS
PCS series...62
Metallic mating guide
with provision
for preventing misinsertion
PCS-E( )G4-( )
B-65PCS
PCS series...63
Key rivet for preventing
misinsertion
PCS-E-PK+R
B-66PCS
PCS series...64
Misinsertion prevention guide
PCS-E( )PG-( )
B-67PCS
PCS series...65
Misinsertion prevention guide
PCS-E96PG-( )
B-68PCS
PCS series...66
Spacer hardware for male
connector
PCS-E( )M-SP
B-69PCS
PCS series...67
PCS
Screw lock
PCS-XE50SJ( )U2
B-70PCS
PCS series...68
Plug-in type terminator
PCS-68FTH014X+
B-71PCS
PCS series...69
1.27 mm pitch connector
For PCB
Straight Through hole
● Configuration of product Part No.
Mating connectors: PCS series PCB-side through hole type female connector
Accessories: Dust-proof cap, PCS-( )C
Straight through hole type male connector for PCB
PCS-( )MD+
● Components
➀
➁
➀
➁
Contacts
Insulator
➀➁➂
PCS- ( ) MD+
ø0.8
-
+0.06
4-R1
LAST POS.
LAST POS.
POS.#2
POS.#1
LAST POS.
LAST POS.
LAST POS.
Terminal No.
POS.#2
POS.#2
POS.#1
POS.#1
B
-
+0.1
1.27
B
15˚
A
B
C
1.27
1.905±0.05≈3
9.3 5.7
7.3
2.54
1.27
-
+0.05
HONDA
96M
1
1.905≈3
3.4
œ0.4
➀ Series name
➁ No. of contacts: 34, 48, 68, 96 or 150
➂ Type of connector
MD: Straight through hole type, male
31.63
40.52
53.22
71.0
105.29
20.32
29.21
41.91
59.69
93.98
24.69
33.58
46.28
64.06
98.35
PCS-34MD+
PCS-48MD+
PCS-68MD+
PCS-96MD+
PCS-150MD+
ABC
● Dimensions
Recommended PCB layout
(Connector side)
t = 1.6 mm
Form of connectors other than
96-contact connector
For 34-contact connector
For 34-contact connector
Part No.
Because some combinations of “Configurations of
Product Part No.”, are under consideration for
development, please contact us for availability details.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
PCS PCS PCS PCS PCS PCS PCS PCS PCS PCS PCS PCS PCS PCS
Straight through hole type female connector for PCB
PCS-( )FD+
1.27 mm pitch connector
For PCB
Straight Through hole
● Configuration of product Part No.
Mating connectors: PCS series straight through hole type male connector for PCB (Stacked height: 14.9 mm)
PCS series right-angle through hole type male connector for PCB
➀➁➂
PCS- ( ) FD+
● Components
➀
➁
Insulator
Contact
31.63
40.52
53.22
71.0
105.29
20.32
29.21
41.91
59.69
93.98
24.49
33.38
46.08
63.86
98.15
PCS-34FD+
PCS-48FD+
PCS-68FD+
PCS-96FD+
PCS-150FD+
ABC
LAST POS.
POS.#1
POS.#2
4-R0.9
LAST POS. LAST POS.
POS.#2 POS.#1
LAST POS. LAST POS.
POS.#1
B
-
+0.1
1.27
B
A
B
C
1.27
5.6 5.0
10.6 REF. 5.5
7.3
2.54
1.27
-
+0.05
0.4≈0.35
1.905≈3
3.4
➀ Series name
➁ No. of contacts: 34, 48, 68, 96 or 150
➂ Type of connector
FD: Straight through hole type, female
● Dimensions
Part No.
Recommended PCB layout
(Connector side)
t = 1.6 mm
For 34-contact connector
For 34-contact connector
ø0.8
-
+0.06
POS.#2
1.905±0.05≈3
15˚
➀
➁
Because some combinations of “Configurations of Product
Part No.”, are under consideration for development, please
contact us for availability details.
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
For PCB
Right-angle Through hole
● Configuration of product Part No.
Mating connectors: PCS series straight through hole type female connector for PCB
PCS series right-angle through hole type female connector for PCB
Right-angle through hole type male connector for PCB
PCS-( )LMD+
● Components
➀
➁
➂
Insulator
Contacts
Bracket
➀➁➂
➂
PCS- ( ) LMD+
31.63
40.52
53.22
71.0
20.32
29.21
41.91
59.69
24.69
33.58
46.28
64.06
PCS-34LMD+
PCS-48LMD+
PCS-68LMD+
PCS-96LMD+
AB C
● Dimensions
Part No.
➀ Series name
➁ No. of contacts: 34, 48, 68 or 96
➂ Type of connector
LMD: Right-angle through hole type, male
LAST POS.
POS.#2
LAST POS.
POS.#1
POS.#2
LAST POS.
POS.#1
LAST POS.
1.27
B
17.5
(10.5MAX)
4-R1
POS. #marking
(4 PLCS)
LAST POS.
POS.#2
POS.#1
A
B
C
1.27
5.7
7.3
2.54
1.27
-
+0.05
B
-
+0.1
1.905≈310.9
3.4
➀
➁
15˚ œ0.4
Recommended PCB layout
(Connector side)
t = 1.6 mm
For 34-contact connector
For 34-contact connector
ø0.8
-
+0.06
1.905±0.05≈3
Board-edge
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Right-angle through hole type female connector for PCB
PCS-( )LFD+
1.27 mm pitch connector
For PCB
Right-angle Through hole
● Configuration of product Part No.
Mating connectors: PCS series straight through hole type male connector for PCB
PCS series right-angle through hole type male connector for PCB
➀➁➂
➀
➁
➂
PCS- ( ) LFD+
➀ Series name
➁ No. of contacts: 34, 48, 68 or 96
➂ Type of connector
LFD: Right-angle through hole type, female
● Components
➀
➁
➂
Insulator
Contacts
Bracket
31.63
40.52
53.22
71.0
20.32
29.21
41.91
59.69
24.49
33.38
46.08
63.86
PCS-34LFD+
PCS-48LFD+
PCS-68LFD+
PCS-96LFD+
POS.#1
LAST POS.
POS.#2
LAST POS.
LAST POS.
POS.#1
POS.#2
LAST POS.
1.27
B
17.0
5.0
(4.8MAX.)
1.27
-
+0.05
B
-
+0.1
LAST POS.
POS.#1
POS.#2
4-R0.9
A
B
C
1.27
5.5
7.3
2.54
5.2
0.35≈4
1.905≈3
3.4
● Dimensions
Part No. AB C
Recommended PCB layout
(Connector side)
t = 1.6 mm
For 34-contact connector
For 34-contact connector
ø0.8
-
+0.06
1.905±0.05≈3
Board-edge
15˚
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
For PCB
Right-angle Through hole
● Configuration of product Part No.
Mating connectors: PCS-128LFDT-GP+
Right-angle through hole type male connector for PCB
PCS-128LMDT-GP+
● Components
➀
➁
➂
➃
Insulator
Contacts
Bracket
Lock pin
➀➃➄➁➂
➀
➃
➁
➂
PCS- 128 LMD T- GP+
POS.#1
POS.#2
3.4
3.65
89.52
82.861
3.2
2.5
84.65
85.75
88.9
92.93
80.01
1.27
10.91.905≈3
21.9 REF.
17.5 4.4
5.7
7.3
1.14
2.54
1.1
3.5
4.5
80.01±0.1
88.9±0.1
(10.4 MAX.)
POS.#1
POS.#2
2-ø2.3±0.1
LAST POS.
POS.#2
POS.#1
LAST POS.
LAST POS.
➀ Series name
➁ No. of contacts: 128
➂ Type of connector
LMD: Right-angle through hole type, male
➃ Lock pin
➄ Mating guide
Recommended PCB layout
(Connector side)
t = 1.6 mm
ø0.8
-
+0.06
1.905±0.05≈3
œ0.4
1
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Right-angle through hole type female connector for PCB
PCS-128LFDT-GP+
1.27 mm pitch connector
For PCB
Right-angle Through hole
● Configuration of product Part No.
Mating connectors: PCS-128LMDT-GP+
➀➃➄➁➂
PCS- 128 LFD T- GP+
● Components
➀
➁
➂
➃
Insulator
Contacts
Bracket
Lock pin
➀ Series name
➁ No. of contacts: 128
➂ Type of connector
LFD: Right-angle through hole type, female
➃ Lock pin
➄ Mating guide
80.01±0.1
88.9±0.1
POS.#2
POS.#1
LAST POS.
LAST POS.
POS.#2 LAST POS.
POS.#1
POS.#2
3.4
3.65
86.75
84.85
2.3
88.9
92.93
82.76
80.01
89.92
1.27
5.21.905≈3
0.35≈0.4
17
5
7.3
5.5
1
3.7
2.54
1
4.2
4.5
POS.#1
2-ø2.3±0.1
Recommended PCB layout
(Connector side)
t = 1.6 mm
ø0.8±0.06
1.905±0.05≈3
➀
➃
➁
➂
(4.7 MAX.)
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
For PCB
Straight Through hole
➀ Series name
➁ No. of contacts: 20, 28, 36, 50 or 68
➂ Type of connector
MD: Straight through hole type, male
● Configuration of product Part No.
Mating connectors: PCS-E series cable-side IDC type female connector
PCS-E series cable-side soldering type female connector
Accessories: Dust-proof cap, PCS-( )C( )
Straight through hole type male connector for PCB
PCS-E( )MD+
➀
➀
➁
➁
➂
➂
PCS-E ( ) MD+
33.4
38.5
43.6
52.5
63.9
27.4
32.5
37.6
46.5
57.9
11.43
16.51
21.59
30.48
41.91
15.8
20.88
25.96
34.85
46.28
21.6
26.7
31.8
40.7
52.1
PCS-E20MD+
PCS-E28MD+
PCS-E36MD+
PCS-E50MD+
PCS-E68MD+
ABCDE
● Dimensions
Part No.
● Components
➀
➁
➂
Contacts
Insulator
Shell
POS.#2POS.#1 2-M2.5≈0.45
1.905≈3
E 0.85
1.27
C
E
0.85
A
B
C
1.27
D
7.0
3.4
2.54
5.7
5.5
4.0
10.5
9.3
POS.#1 POS.#2
LAST POS.
4-R1
LAST POS.
2-ø2.8
LAST POS.
LAST POS.
LAST POS.
B
-
+0.1
C
-
+0.1
1.27
-
+0.05
POS.#2
Recommended PCB layout
(Connector side)
t = 1.6 mm
Except 50-contact connector
Except 50-contact connector
POS.#1
ø0.8
-
+0.06
1.905±0.05≈3
œ0.4
15˚
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Right-angle through hole type male connector for PCB
PCS-E( )LMD+
1.27 mm pitch connector
For PCB
Right-angle Through hole
● Configuration of product Part No.
Mating connectors: PCS-E series cable-side IDC type female connector
PCS-E series cable-side soldering type female connector
Accessories: Dust-proof cap, PCS-( )C( )
➀➁➂
PCS-E ( ) LMD+
➀ Series name
➁ No. of contacts: 20, 28, 36, 50, 68, 80 or 96
➂ Type of connector
LMD: Right-angle through hole type, male
2-M2.5≈0.45
LAST POS.
LAST POS.
POS.#1
E0.85 0.85
1.27
C
F
B
3.6
0.8
4
4.0
5.5
17.0
2.8
5.905
8.47
4.37
3.4
2.0
POS.#2 2-M2.5≈0.45
A
B
C
1.27
D
7.0
2.54
5.7
10.5
POS.#1
POS.#2
4-R1
LAST POS.
2.00.8
LAST POS.
LAST POS.
B
-
+0.1
C
-
+0.1
1.27
-
+0.05
5.705
POS.#1
1.905≈3
Board-edge
2-ø2.8
POS.#2
ø0.8
-
+0.06
1.905±0.05≈3
15˚
œ0.4
33.4
38.5
43.6
52.5
63.9
71.5
81.7
27.4
32.5
37.6
46.5
57.9
65.5
75.69
11.43
16.51
21.59
30.48
41.91
49.53
59.69
15.8
20.88
25.96
34.85
46.28
53.9
64.06
21.6
26.7
31.8
40.7
52.1
59.7
69.9
PCS-E20LMD+
PCS-E28LMD+
PCS-E36LMD+
PCS-E50LMD+
PCS-E68LMD+
PCS-E80LMD+
PCS-E96LMD+
ABCDE
20.23
25.31
30.39
39.28
50.71
58.33
68.49
F
● Dimensions
Part No.
● Components
➀
➁
➂
➃
Shell
Insulator
Contacts
Bracket
Recommended PCB layout
(Connector side)
t = 1.6 mm
Except 50-contact connector
Except 50-contact connector
➀
➃
➁
➂
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
For cable
IDC (1.2 mm)
● Configuration of product Part No.
Mating connectors: PCS-E series through hole type male connector for PCB
PCS-E series IDC type male connector for panel
Tool: (Refer to page Tool-11)
IDC type female connector for cable
PCS-E( )F( )
➀➃➁➂
➀
➃
➄
➄
➁
➂
PCS-E ( ) F ( )
● Components
➀
➁
➂
➃
➄
Contacts
Spacer
Shell
Insulator
Cable cover
21.65
26.7
31.8
40.7
52.1
59.7
69.9
11.43
16.51
21.59
30.48
41.91
49.53
59.69
15.4
20.48
25.56
34.45
45.88
53.5
63.66
PCS-E20F( )
PCS-E28F( )
PCS-E36F( )
PCS-E50F( )
PCS-E68F( )
PCS-E80F( )
PCS-E96F( )
ABC
● Dimensions
Part No.
C
1.27
B
A
B
1.27
5.5
2.54
7.3
5
13.2
POS.#1
POS.#2
LAST POS.
POS.#1POS.#2
LAST POS.
Cable cover for discrete wire
Cable cover for flat cable
15˚
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
Note 1: This 96-contact connector is
not available for flat cable.
➀ Series name
➁ No. of contacts: 20, 28, 36, 50, 68, 80 or 96
➂ Type of contact: Female
➃ Cable sizes for reference purposes (In case the cable sheath is made of PVC resin)
Blank: AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of insulation is
0.8–1.0 mm. For discrete wire.
A : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of insuration is
0.5–0.65 mm. For discrete wire.
B : AWG#30(7 / 0.1). Outside diameter of wire is 0.5–0.65 mm. For discrete wire.
C : AWG#28(7 / 0.127) For flat cable
D : AWG#30(7 / 0.1) For flat cable (See Note #1)
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Soldering type female connector for cable
PCS-E( )FS+
1.27 mm pitch connector
For cable
Soldering
● Configuration of product Part No.
Mating connectors: PCS-E series through hole type male connector for PCB
PCS-E series IDC type male connector for panel
➀➁➂
PCS-E ( ) FS+
➀ Series name
➁ No. of contacts: 20, 28, 36, 50 or 68
➂ Type of contact: Soldering type, female
Cable sizes for reference purposes
FS: AWG#20 MAX.
● Components
➀
➁
➂
➃
Contacts
Insulator
Shell
Spacer
ABC
● Dimensions
Part No.
21.65
26.7
31.8
40.7
52.1
11.43
16.51
21.59
30.48
41.91
PCS-E20FS+
PCS-E28FS+
PCS-E36FS+
PCS-E50FS+
PCS-E68FS+
15.4
20.48
25.56
34.45
45.88
C
A
B
1.27
5.5
2.54
7.3
B
1.27
5
6
13.7
POS.#1POS.#2
LAST POS.
POS.#1
POS.#2
LAST POS.
➀
➃
➁
➂
15˚
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
For cable
IDC (1.27 mm)
● Configuration of product Part No.
Mating connectors: PCS-E series cable-side soldering type female connector
PCS-E series cable-side IDC type female connector
Accessories: Dust-proof cap, PCS-E( )C( )
IDC type male connector for panel
PCS-E( )PM( )-( )
➀➃➄➅➁➂
PCS-E ( ) P M ( )- ( )
➀ Series name
➁ No. of contacts: 20, 28, 36, 50 or 68
➂ For panel
➃ Type of contact: Male
➄ Cable sizes for reference purposes (
In case the cable insulation is made of PVC resin
)
Blank: AWG#28(7 / 0.127). AWG#30(1 / 0.245). For flat cables
A : AWG#28(7 / 0.127). AWG#30(1 / 0.245). Outside diameter of insulation is
0.8–1.0 mm. For discrete wire.
B : AWG#30(7 / 0.1). For flat cables.
C : AWG#28(7 / 0.127) flat cable. AWG#30(1 / 0.245). Outside diameter of
insulation is 0.5–0.65 mm. For discrete wire.
D : AWG#30(7 / 0.1).
Outside diameter of wire is 0.5–0.65 mm. For discrete wire.
➅ Holes on mounting flange
Blank: M2.5≈0.45
H : Diameter of hole: 2.7 mm (The connector is mounted on the Die-cast
material vertical backshell of PCS-E( )PML( ).)
● Components
➀
➁
➂
➃
➄
Insulator
Shell
Contacts
Spacer
Cable cover
33.4
38.5
43.6
52.5
63.9
27.4
32.5
37.6
46.5
57.9
PCS-E20PM( )
PCS-E28PM( )
PCS-E36PM( ),-H
PCS-E50PM( )
PCS-E68PM( )
AB
15.8
20.88
25.96
34.85
46.28
C
11.43
16.51
21.59
30.48
41.91
D
21.6
26.7
31.8
40.7
52.1
E
21.65
26.7
31.8
40.7
52.1
F
● Dimensions
Part No.
A
B
C
LAST POS.
10.5
5.7
15.6
2.45
3.65.5
4
4-R1
POS.#1
D
E
D
F
1.27
1.27
0.85
0.85
Holes on mounting flange
For discrete wire For flat cable
➀
➃➄➄
➁
➂
15˚
Because some combinations of
“Configurations of Product Part No.”, are
under consideration for development,
please contact us for availability details.
This figure shows 36-contact connector as a typical example.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
or 6
8
63
.
9
5
7.
9
P
CS-E68PM
(
)
46
.
28
41
.
91
52
.
1
52
.
1
Acc
ess
ori
es:
Dust-
p
roof ca
p
, PCS-E
(
)
C
(
)
IDC type male connector for cable
PCS-D( )( )MA1( )+
1.27 mm pitch connector
For cable
IDC (0.635 mm)
Daisy chain
● Configuration of product Part No.
Mating connectors: PCS series straight through hole type female connector for PCB
PCS-XE series through hole type female connector for PCB
Required tools: MLPT-0003A (68 contacts) and MLPT-0003B (50 contacts) locators
➀➃➄➅➁➂
PCS-D ( ) ( ) M A 1 ( )+
● Components
➀
➁
➂
➃
➄
Contacts
Insulator
Cable housing A
Cable housing B
Strain relief
➀ Series name
➁ No. of contacts: 50 or 68
➂ Strain relief
Blank: Not provided
R : Provided
➃ Type of contact: Male
➄ Cable size
A: AWG#30 (7 / 0.1) For flat cable
➅ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
ABCDE
Part No.
40.13
51.56
30.48
41.91
34.85
46.28
PCS-D50( )MA1( )+
PCS-D68( )MA1( )+
36.8
48.23
31.115
42.545
LAST POS.
POS.#1 POS.#2
A
C
1.27
0.635
7.3
5.69
2.54
5.18.65
LAST POS. 4-R1.04
POS.#1
POS.#2
B
E
D
2.02.5
IDC direction
➀
➃
➄
➁
➂
15˚
Because some combinations of “Configurations of
Product Part No.”, are under consideration for
development, please contact us for availability details.
● Dimensions
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
For cable
IDC (0.635 mm)
Daisy chain
● Configuration of product Part No.
Mating connectors: PCS series through hole type male connector for PCB
Required tools: Locator, MLPT-0006A (only for 68 contacts)
IDC type female connector for cable
PCS-D68( )FA1( )+
➀➃➄➁➂ ➅
PCS-D 68 ( ) F A 1 ( )+
● Components
➀
➁
➂
➃
➄
Contacts
Insulator
Cable housing A
Cable housing B
Strain relief
51.56
41.91
46.13
42.545
0.635
1.27
7.3
5.54
8.25 5
2.54
POS.#1POS.#2
LAST POS.
LAST POS. 4-R1
POS.#2 POS.#1
2.0
2.5
➀ Series name
➁ No. of contacts: 68
➂ Strain relief
Blank: Not provided
R : Provided
➃ Type of contact: Female
➄ Cable sizes
A: AWG#30 (7 / 0.1) For flat cable
➅ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
➀
➃
➄
➁
➂
IDC direction
15˚
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Straight through hole type female connector for PCB
PCS-XE( )SFD( )( )+
1.27 mm pitch connector
For PCB
Straight Through hole
SCSI-II
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
➀➃➄➁➂ ➅
PCS-XE ( ) S FD ( ) ( )+
● Dimensions
Part No.
Part No.
PCS-XE26SFD( )( )+
PCS-XE50SFD( )( )+
PCS-XE68SFD( )( )+
37.2
52.5
63.9
31.2
46.5
57.9
15.24
30.48
41.91
19.46
34.7
46.13
27.05
42.29
53.72
20.0
35.24
46.67
ABCDEF
PCS-XE( )SFD( )+
PCS-XE( )SFDU( )+
PCS-XE( )SFDU2( )+
M2.5≈0.45
#4-40UNC
#2-56UNC
2.8
3.05
2.5
øGScrews size
● Components
➀
➁
➂
➃
Shell A
Shell B
Insulator
Contacts
C
E
A
B
C
D
F
LAST POS.
POS.#1
POS.#2 POS.#1
POS.#2
POS.#2 POS.#1
JAPAN
HONDA
5.4
3.4
1.27 0.35≈0.4
9.3 REF.
5.5
1.5
3.8
0.85
1.27
8.2
5.54
2.54
4-R1
7
LAST POS.
1.905≈3
B
-
+0.1
C
-
+0.1
1.27
-
+0.05
øG
-
+0.1
LAST POS.
LAST POS.
LAST POS.
Note 1: This 26-contact connector is not available
for #4-40UNC and #2-56UNC screws.
Recommended PCB layout
(Connector side)
t = 1.6 mm
15˚
Screw size
ø0.8
-
+0.06
1.905±0.05≈3
➀
➃
➁
➂
➀ Series name
➁ No. of contacts: 26, 50 or 68
➂ Type of shell
S: Short shell
➃ Type of connector
FD:
Straight through hole type,
female
➄ Screw size
Blank: M2.5≈0.45 (standard)
U : #4-40UNC
U2 : #2-56UNC
➅ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
For 68-contact
connector For 68-contact
connector
•
•
•
•
•
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
➅
C
ontact plati
ng
Bl
an
k
:
Mi
n.
0
.
2
μ
m
Gold platin
g
G
1 : Min. 0.76
μ
m
G
old platin
g
➅
(
(
(
)
+
1.27 mm pitch connector
For PCB
Straight Through hole
SCSI-III
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector
Straight through hole type female connector for PCB
PCS-XE( )SFD( )N( )+
➀➃➄➁➂ ➆➅
PCS-XE ( ) S FD ( ) N ( )+
52.5
63.9
84.3
46.5
57.9
78.23
30.48
41.91
62.23
34.7
46.13
66.45
35.24
46.67
66.99
42.1
53.5
73.85
PCS-XE50SFD( )N( )+
PCS-XE68SFD( )N( )+
PCS-XE100SFD( )N( )+ PCS-XE( )SFDN( )+
PCS-XE( )SFDUN( )+
PCS-XE( )SFDU2N( )+
● Dimensions
Part No.
Part No. ABCDEF
M2.5≈0.45
#4-40UNC
#2-56UNC
2.8
3.05
2.5
øGScrews size
● Components
➀
➁
➂
➃
Shell A
Shell B
Insulator
Contacts
9.2 REF.
3.8 5.4
2.54
8.2
5.54
1.27
C
D
E
C
A
B
POS.#2
POS.#2 POS.#1
LAST POS.
POS.#1
POS.#2
4-R1
0.35≈0.41.27
5.0
F
LAST POS.
JAPAN
HONDA
3.4
1.905≈3
LAST POS.
LAST POS.
1.27
-
+0.05
C
-
+0.1
B
-
+0.1
LAST POS.
Note 1: This 26-contact connector is not available
for #4-40UNC and #2-56UNC screws.
➀ Series name
➁ No. of contacts: 50, 68 or 100
➂ Type of shell
S: Short shell
➃ Type of connector
FD: Straight through hole type,
female
➄ Screw size
Blank: M2.5≈0.45
U : #4-40UNC (standard)
U2 : #2-56UNC
➅ Lock type
N: Screw lock
➆ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
Recommended PCB layout
(Connector side)
t = 1.6 mm
For 68 or 100-contact
connectors For 68 or 100-contact
connectors
➀
➃
➁
➂
•
•
•
•
•
•
15˚
Screw size
POS.#1
øG
-
+0.1
ø0.8
-
+0.06
1.905±0.05≈3
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
➆
(
(
(
(
)+
➆
Contact plati
Bl
an
k
:
Mi
n
G
1 : Min
platin
g
d
platin
g
a
ti
ng
. 0.2
μ
m
G
old
. 0.76
μ
m
G
ol
d
Right-angle through hole type female connector for PCB
PCS-XE( )LFD( )( )+
1.27 mm pitch connector
For PCB
Right-angle Through hole
SCSI-II
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
➀➃➄➁➂
PCS-XE ( ) LFD ( ) ( )+
Recommended PCB layout
(Connector side)
t = 1.6 mm
For 68-contact
connector
For 68-contact connector
● Components
➀
➁
➂
➃
➄
Bracket
Shell A
Shell B
Insulator
Contacts
➀ Series name
➁ No. of contacts: 50 or 68
➂ Type of connector
LFD: Right-angle through hole type,
female
➃ Screw size
Blank: M2.5≈0.45 (standard)
U : #4-40UNC
U2 : #2-56UNC
➄ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
PCS-XE( )LFD( )+
PCS-XE( )LFDU( )+
PCS-XE( )LFDU2( )+
M2.5≈0.45
#4-40UNC
#2-56UNC
2.8
3.05
2.5
Part No. Screws size øG
PCS-XE50( )LFD( )( )+
PCS-XE68( )LFD( )( )+
52.5
63.9
46.5
57.9
Part No. AB
30.48
41.91
C
34.7
46.13
D
42.29
53.72
E
39.28
50.71
F
● Dimensions
POS.#1
POS.#2
POS.#2
LAST POS.
øG±0.1 ø0.8±0.06
5.705 REF.
1.905±0.05≈3
LAST POS.
C±0.1
B±0.1
1.27±0.05
1.905≈3
4.0
3.4
2
3.6
0.8
5.4
2.8
Screws size
Screws size
POS.#1
POS.#2
POS.#1
POS.#1
LAST POS.
POS.#2
POS.#1
POS.#2
17
1.5
5.5
5.905
0.85
D
C
E
C
F
1.27
B
2
4.37
8.47
A
B
1.27 ¢
∞
£
™
¡
4-R1
7
2.54
5.5
10.5
15˚
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
For PCB
Right-angle Through hole
SCSI-III
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
Right-angle through hole type female connector for PCB
PCS-XE68LFDT( )N( )+
➀➃➄➁➂ ➅¶
PCS-XE 68 LFD T ( ) N ( )+
➀ Series name
➁ No. of contacts: 68
➂ Type of connector
LFD: Right-angle through hole type,
female
➃ Board lock pin
Blank: None
T : Provided
➄ Screw size
Blank: M2.5≈0.45
U : #4-40UNC (standard)
U2 : #2-56UNC
➅ Lock type
N: Screw lock
¶ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
● Components
➀
➁
➂
➃
➄
➅
Bracket pin
Shell A
Shell B
Insulator
Board lock
Contacts
Recommended PCB layout
(Connector side)
t = 1.6 mm
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
PCS-XE68LFDT( )N( )+ 63.9 57.9 41.91 46.13 50.71
Part No. AB
CD
● Dimensions
E
PCS-XE68LFDTN( )+
PCS-XE68LFDTUN( )+
PCS-XE68LFDTU2N( )+
M2.5≈0.45
#4-40UNC
#2-56UNC
2.8
3.05
2.5
Part No. Screws size øF
3.6
0.8
C±0.1
D
4.373.4
2.0
2.85
41.905≈3
1.905±0.05≈3
0.8
§
8.47
øF±0.1
ø0.8±0.06
5.705 REF.
Board-edge
B±0.1
LAST POS.
1.27±0.05
¢
∞
Screw size
POS.#1
POS.#2
£
¡
™
1.27
C
B
A
10.5
5.5
15˚
LAST POS.
2.54
B
E
C
1.27
16.9
5.4
5.905
LAST POS.
2.8
4-R1
POS.#2
POS.#1
POS.#1
POS.#2
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Right-angle through hole type female connector for PCB
PCS-XE100LFD( )-( )+
1.27 mm pitch connector
For PCB
Right-angle Through hole
Screw lock
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
➀➃➄➁➂
PCS-XE 100 LFD ( )- ( )+
● Components
➀
➁
➂
➃
➄
➅
Bracket
Ground plate
Shell
Insulator
Contacts
Lock screws
Part No.
#4-40UNC
#2-56UNC
Screws size
PCS-XE100LFD( )-HS+
PCS-XE100LFD( )-HSU2+
POS.#1
POS.#2
LAST POS.
2-ø3.05
1.27
-
+0.05
1.27≈49=62.23±0.1
78.23
-
+0.1
6.405MAX.
86.0
1.27≈49=62.23
1.27 POS.#1
POS.#2
POS.#2 POS.#1
8.74
2.54
5.5
16.9
5.4
6.705
78.23
66.45
LAST POS.
1.27
LAST POS.
5.5
3.7
M3≈0.5
6.4 REF.
4.6
4.05
1.905≈3
4.8
3.17
127≈49=62.23
78.23
#4-40UNC
3.9
1.6
ø0.8
-
+0.06
1.905±0.05≈3
Recommended PCB layout
(Connector side)
t = 1.6 mm
Screw size
Panel
(Panel thickness: 1.6 mm)
Panel
thickness
➀
➃
➄
➁
➂
➅
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
➀ Series name
➁ No. of contacts: 100
➂ Type of connector
LFD: Right-angle through hole type,
female
➃ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
➄ Screw sizes for lock screws
HS : #4-40UNC (standard)
HSU2: #2-56UNC
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
For PCB
Right-angle Through hole
SCSI-II
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
Right-angle through hole type female connector for PCB
PCS-XE( )SLFD( )( )+
➀➃➄➁➂ ➅
PCS-XE ( ) S LFD ( ) ( )+
➀ Series name
➁ No. of contacts: 26, 50 or 68
➂ Type of shell
S: Short shell
➃ Type of connector
LFD: Right-angle through hole type,
female
➄ Screw size
Blank: M2.5≈0.45 (standard)
U : #4-40UNC
U2 : #2-56UNC
➅ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
● Components
➀
➁
➂
➃
➄
Bracket
Shell A
Insulator
Shell B
Contacts
37.2
52.5
63.9
31.2
46.5
57.9
15.24
30.48
41.91
19.46
34.7
46.13
27.05
42.29
53.72
PCS-XE26SLFD( )( )+
PCS-XE50SLFD( )( )+
PCS-XE68SLFD( )( )+
PCS-XE( )SLFD( )+
PCS-XE( )SLFDU( )+
PCS-XE( )SLFDU2( )+
● Dimensions
Part No.
Part No. ABCDEF
M2.5≈0.45
#4-40UNC
#2-56UNC
2.8
3.05
2.5
øGScrews size
24.05
39.28
50.71
POS.#2
1.905≈34.0
0.8
0.5
3.2
2.0
4.37
8.473.4
POS.#1
JAPAN
HONDA
1.27
-
+0.05
C
-
+0.1
5.705 REF.
B
F
C
7.0
POS.#2
LAST POS.
A
B
C
1.27
8.2
5.54
2.54
4-R1
0.4≈0.35
1.27
17.0
1.5
5.905 5.5
0.85
E
D
5.4
2.8
POS.#1
POS.#1
POS.#2
POS.#1
POS.#1
POS.#2
LAST POS. LAST POS.
B
-
+0.1
øG
25
50
1
26
Board-edge
POS.#2 ø0.8
-
+0.06
1.905±0.05≈3
Recommended PCB layout
(Connector side)
t = 1.6 mm
15˚
Screw size
Screw size
For 68-contact
connector
For 68-contact connector
➀
➃
➄
➁
➂
Because some combinations of “Configurations of Product Part No.”, are under consideration for development, please contact us for availability details.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
➅
(
(
(
)
+
➅
Contact plating
Bl
an
k:
M
in
.
0.
2
μ
m Gold platin
g
G
1 : Min. 0.76
μ
m
G
old platin
g
Right-angle through hole type female connector for PCB
PCS-XE( )SLFDT( )( )+
1.27 mm pitch connector
For PCB
Right-angle Through hole
SCSI-II
➀ Series name
➁ No. of contacts: 26, 50 or 68
➂ Type of shell
S: Short shell
➃ Type of connector
LFD: Right-angle through hole type,
female
➄ Board lock pin: Provided
➅ Screw size
Blank: M2.5≈0.45 (standard)
U : #4-40UNC
U2 : #2-56UNC
➆ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
PCS-XE ( ) S LFD T ( ) ( )+
● Components
➀
➁
➂
➃
➄
➅
Bracket
Shell B
Insulator
Shell A
Contacts
Board lock pin
37.2
52.5
63.9
31.2
46.5
57.9
15.24
30.48
41.91
19.46
34.7
46.13
27.05
42.29
53.72
PCS-XE26SLFDT( )( )+
PCS-XE50SLFDT( )( )+
PCS-XE68SLFDT( )( )+
PCS-XE( ) SLFDT( )+
PCS-XE( ) SLFDTU( )+
PCS-XE( ) SLFDTU2( )+
● Dimensions
Part No.
Part No. ABCDEF
M2.5≈0.45
#4-40UNC
#2-56UNC
2.8
3.05
2.5
øGScrews size
24.05
39.28
50.71
0.5
3.4
3.3
0.8
41.905≈3
4.37
8.47
B
F
C
1.27
17.0
1.5
5.905 5.5
0.85
5.4
2.8
POS.#1
POS.#2
LAST POS.
E
7.0
LAST POS.
A
B
C
1.27
8.22.85
5.54
2.54
4-R1
0.4≈0.35
D
25
50
1
26
POS.#1
POS.#2
POS.#2
POS.#1
1.27
-
+0.05
C
-
+0.1
5.705 REF.
POS.#1
POS.#2
POS.#1
LAST POS.
B
-
+0.1
øG
-
+0.05
Board-edge
POS.#2 ø0.8
-
+0.06
1.905±0.05≈3
Recommended PCB layout
(Connector side)
t = 1.6 mm
15˚
Screw size
➀
➃
➄
➁
➂
➅
For 68-contact connector
For 68-contact connector
➀➃➄➆➁➂ ➅
Because some combinations of “Configurations of Product Part No.”, are under consideration for development, please contact us for availability details.
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
(
(
(
)+
➆
➆
Contact plati
ng
Bl
an
k
:
Mi
n.
0
.
2
μ
m Gold platin
g
G
1 : Min. 0.76 μm
G
old
p
lati
ng
1.27 mm pitch connector
For PCB
Right-angle Through hole
SCSI-III
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
Right-angle through hole type female connector for PCB
PCS-XE( )SLFD( )N( )+
➀➃➄➁➂ ➅ ➆
PCS-XE ( ) S LFD ( ) N ( )+
➀ Series name
➁ No. of contacts: 50 or 68
➂ Type of shell
S: Short shell
➃ Type of connector
LFD: Right-angle through hole type,
female
➄ Screw size
Blank: M2.5≈0.45
U : #4-40UNC (standard)
U2 : #2-56UNC
➅ Lock type
N: Screw lock
➆ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
● Components
➀
➁
➂
➃
➄
Bracket
Shell B
Insulator
Shell A
Contacts
PCS-XE( )SLFDN( )+
PCS-XE( )SLFDUN( )+
PCS-XE( )SLFDU2N( )+
● Dimensions
Part No.
Part No. ABCD E
M2.5≈0.45
#4-40UNC
#2-56UNC
2.8
3.05
2.5
øFScrews size
PCS-XE50SLFD( )N( )+
PCS-XE68SLFD( )N( )+
52.5
63.9
46.5
57.9
30.48
41.91
34.7
46.13
39.28
50.71
0.5
3.2
0.8
1.905≈34
2.0
3.4
4.37
B
E
C
1.27
0.4≈0.35
16.9
5.905 5.4
2.8
POS.#1
POS.#2
LAST POS.
POS.#1
POS.#2
LAST POS.
A
B
C
1.27
8.2
5.54
2.54
4-R1
D
JAPAN
HONDA
1.27
-
+0.05
C
-
+0.1
5.705 REF.
POS.#1
POS.#2
POS.#2
POS.#1 POS.#1
LAST POS.
B
-
+0.1
øF
8.47
Board-edge
POS.#2 ø0.8
-
+0.06
1.905±0.05≈3
Recommended PCB layout
(Connector side)
t = 1.6 mm
15˚
➀
➃
➄
➁
➂
For 68-contact connector
For 68-contact connector
Screw size
Screw size
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
➆
(
(
(
(
(
)+
➆
C
ontact
p
l
a
Bl
an
k
:
Min
G
1 : Min
d
platin
g
μ
m Gold plati
ng
a
ting
n
.
0.
2
μ
m Go
ld
.
0
.7
6
μ
m
Go
Right-angle through hole type female connector for PCB
PCS-XE( )SLFDT( )N( )+
1.27 mm pitch connector
For PCB
Right-angle Through hole
SCSI-III
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
➀➃➄➁➂ ➅ ➆ ➇
PCS-XE ( ) S LFD T ( ) N ( )+
➀ Series name
➁ No. of contacts: 50 or 68
➂ Type of shell
S: Short shell
➃ Type of connector
LFD: Right-angle through hole type,
female
➄ Board lock pin: Provided
➅ Screw size
Blank: M2.5≈0.45
U : #4-40UNC (standard)
U2 : #2-56UNC
➆ Lock type
N: Screw lock
➇ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
● Components
➀
➁
➂
➃
➄
➅
Bracket
Shell B
Insulator
Shell A
Contacts
Board lock pin
PCS-XE( )SLFDTN( )+
PCS-XE( )SLFDTUN( )+
PCS-XE( )SLFDTU2N( )+
● Dimensions
Part No.
Part No. ABCDE
M2.5≈0.45
#4-40UNC
#2-56UNC
2.8
3.05
2.5
øFScrews size
PCS-XE50SLFDT( )N( )+
PCS-XE68SLFDT( )N( )+
52.5
63.9
46.5
57.9
30.48
41.91
34.70
46.13
39.28
50.71
0.5
3.2
0.8
1.905≈34
3.4
4.37
B
E
C
1.27
16.9
5.905 5.4
2.8
POS.#1
POS.#2
LAST POS.
POS.#1
POS.#2
LAST POS.
A
B
C
1.27
8.22.85
5.54
2.54
4-R1
0.4≈0.35
D
JAPAN
HONDA
1.27
-
+0.05
C
-
+0.1
5.705 REF.
POS.#1
POS.#2
POS.#2
POS.#1
POS.#1
LAST POS.
B
-
+0.1
øF
-
+0.1
8.47
Board-edge
POS.#2 ø0.8
-
+0.06
1.905±0.05≈3
Recommended PCB layout
(Connector side)
t = 1.6 mm
15˚
Screw size
For 68-contact connector
For 68-contact connector
➀
➃
§
➄
➁
➂
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
➇
(
(
(
)+
➇
C
ontact plat
Bl
an
k
:
Mi
n.
0
G
1 : Min.
0
l
d plati
ng
o
ld plati
ng
i
ng
0
.
2
μ
m
Go
l
0
.7
6
μ
m
G
o
1.27 mm pitch connector
For PCB
Right-angle SMT
SCSI-II
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
Right-angle SMT type female connector for PCB
PCS-XE( )SLFYTU( )+
➀➃➄➆➁➂ ➅
PCS-XE ( ) S LFY T U ( )+
➀ Series name
➁ No. of contacts: 26 or 50
➂ Type of shell
S: Short shell
➃ Type of connector
LFY: Right-angle SMT type, female
➄ Board lock pin: Provided
➅ Screw size
U: #4-40UNC
➆ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
● Components
➀
➁
➂
➃
➄
➅
➆
Contacts
Bracket
Shell A
Shell B
Insulator
Snap lock
Snap pin
● Dimensions
Part No.
42.0
57.24
31.2
46.5
15.24
30.48
19.46
34.7
20.93
36.17
27.05
42.29
7.62
15.24
15.875
31.115
PCS-XE26SLFYTU( )+
PCS-XE50SLFYTU( )+
AB
CD EF G H
3.2
0.85 0.85
F
1.5
5.5
18.6
LAST POS. 0.635
G
H
B
POS.#1
POS. #2
POS.#(contacts/2+1)
4.25
5.4
5.905
ø1.5
7
0.8
4.37
11.92
0.5
3.1
1.27
C
B
A
13
26
1
14
5.54
8.57
4-R1
LAST POS. D
E
POS.#2
POS.#1
6.7
-
+0.05
5.705
4.05
4
-
+0.05
E±0.1
B±0.1
0.635
-
+0.05
G
-
+0.05
2
H±0.1
2-ø4.5
-
+0.05
2-ø1.7
-
+0.1
0.6 REF.
Board-edge
Recommended PCB layout
15˚
➀
➃
➄
➁
➂
➆
➅
Screw size
Because some combinations of
“Configurations of Product Part
No.”, are under consideration for
development, please contact us
for availability details.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Straight Press-in type female connector for PCB
PCS-XE50SFP( )( )
1.27 mm pitch connector
For PCB
Straight Press-in
SCSI-II
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
➀➃➄➁➂
PCS-XE 50 SFP ( ) ( )
➀ Series name
➁ No. of contacts: 50
➂ Type of connector
SFP: Straight Press-in type, female
➃ Screw size
Blank: M2.5≈0.45 (standard)
U : #4-40UNC
U2 : #2-56UNC
➄ Contact plating
G1: Min. 0.76 μm Gold plating
POS.#1
POS.#2
LAST POS.
46.5
-
+0.1
1.27
-
+0.05
30.48
-
+0.1
ø0.71
+0.05
-
0.076
øF
1.905≈3
POS.#2
POS.#1
4-R1 1.27
30.48
46.5
52.5
LAST POS.
7
34.7
10
5.54
2.54
13.4 REF.4.8
8.3 5.1
1.5
POS.#1
POS.#2
LAST POS.
42.29
0.85
1.27
30.48
5
1.905±0.05≈3
15˚
Recommended PCB layout
(Connector side)
t = 2.4+0.2 mm
➀
➃
➄
➁
➂
➆
➅
● Components
➀
➁
➂
➃
➄
➅
➆
Small flat head
Insulator A screw
Shell A
Shell B
Insulator B
Contacts
Hex. nuts
PCS-XE50SFP( )
PCS-XE50SFPU( )
PCS-XE50SFPU2( )
Part No.
M2.5≈0.45
#4-40UNC
#2-56UNC
2.8
3.05
2.5
øFScrews size
● Dimensions
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
For cable
IDC (1.27 mm)
SCSI-II, SCSI-III
● Configuration of product Part No.
Mating connectors:
PCS-XE series straight or right-angle through hole type female connector for PCB.
PCS-XE series SMT type female connector.
For use with housings: SCSI-II: PCS-E( )L( ). SCSI-III: PCS-XEM( )DL( )( )N
Required tools: Discrete wire tool: PCS-K1 or FHAT-918B and FHPT-918A. Flat cable tool: PCS-K4
IDC type male connector for cable
PCS-XE( )M( )( )+
➀➃➄➁➂
PCS-XE ( ) M ( ) ( )+
● Components
➀
➁
➂
➃
➄
Contacts
Shell
Insulator
Spacer
Cable cover
● Dimensions
Part No. ABCD
25.46
40.7
52.13
72.45
15.24
30.48
41.91
62.23
19.61
34.85
46.28
66.6
25.46
40.7
52.1
72.4
PCS-XE26M( )( )+
PCS-XE50M( )( )+
PCS-XE68M( )( )+
PCS-XE100M( )( )+
➀
Series name
➁
No. of contacts: 26, 50, 68 or 100
➂
Type of contact: Male
➃
Cable sizes for reference purposes (In case the cable insulation is made of PVC resin)
Blank : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of insulation is
0.8-1.0 mm. For discrete wire. (See Note #1)
A : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of insulation is
0.5-0.65 mm. For discrete wire.
B : AWG#30(7 / 0.1). Outside diameter of insulation is 0.5-0.65 mm. For discrete wire.
C : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). For flat cable, t = 1.0 mm MAX.
(See Note #2)
E : AWG#30(7 / 0.1). For flat cable, t = 1.0 mm MAX. (See Note #2)
J : AWG#28(7 / 0.127) or AWG#30(1 / 0.254). Outside diameter of insulation is
0.65-0.8 mm. For discrete wire.
K : AWG#30(7 / 0.1). Outside diameter of insulation is 0.65-0.8 mm. For discrete wire.
Q : AWG#30(7 / 0.1). Outside diameter of insulation is 0.8-1.0 mm. For discrete wire.
➄
Contact plating
Blank : Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
D
4-R1.04
1.27
B
A
LAST POS.
7.3
5.7
2.54
POS.#1
LAST POS.
C
13.2
5
1.27 B
POS.#1
POS.#2
POS.#2
15˚
➀
➃
➄
➁
➂
Cable cover for discrete wire
Cable cover for flat cable
For 68 or 100-contact connector
Note 1: P/N PCS-XE100M+ is not available.
Note 2: This 100-contact connector is not available
for flat cable. (C, E)
Because some combinations of “Configurations of Product
Part No.”, are under consideration for development, please
contact us for availability details.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Soldering type male connector for cable
PCS-XES68MS+
1.27 mm pitch connector
For cable
Soldering
SCSI-III
● Configuration of product Part No.
Mating connectors: PCS-XE series straight or right-angle through hole type female connector for PCB,
PCS-XE series SMT type female connector for PCB, PCS-XE series of IDC type female connectors for cable panel
For use with housings: PCS-SE68LDAU2N
➀➁➂
PCS-XES 68 MS+
➀ Series name
➁ No. of contacts: 68
➂ Type of connector
MS: Soldering type, male
● Components
➀
➁
➂
Shell
Insulator
Contacts
2.54
5.7
9.8
POS.#1 POS.#2
1.27
49.88
46.28
1.27≈(34-1)=41.91
LAST POS. 4-R1.04
1.27 1.27≈(34-1)=41.91
5
11.5
17.6 REF.
3.05
3.05
POS.#2POS.#1
LAST POS.
➀
➁
➂
15˚
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
IDC type female connector for panel
PCS-XE( )SPF( )( )( )
1.27 mm pitch connector
For cable
IDC (1.27 mm)
SCSI-II
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
➀➃➄➁➂ ➅ ➆ ➇
PCS-XE ( ) S P F ( ) ( ) ( )
● Components
➀
➁
➂
➃
➄
➅
Insulator
Shell
Bracket
Spacer
Contacts
Cable cover
➀ Series name
➁ No. of contacts: 26, 50 or 68
➂ Type of shell
S: Short shell
➃ Panel
P: Panel mounting
➄ Type of contact
F: IDC type, female
➅ Cable sizes for reference purposes
(In case the cable insulation is made of
PVC resin)
Blank :
AWG#28(7 / 0.127) or AWG#30(1 /
0.254). Outside diameter of insulation
is 0.8-1.0 mm. For discrete wire.
A:
AWG#28(7 / 0.127) or AWG#30(1 /
0.254). Outside diameter of insulation
is 0.5-0.65 mm. For discrete wire.
B:
AWG#30(7 / 0.1). Outside
diameter of insulation is 0.5-0.65mm.
For discrete wire.
C : AWG#28(7 / 0.127) or AWG#30
(1 / 0.254). For flat cable,
t = 1.0 mm.
E : AWG#30(1 / 0.1). For flat cable,
t = 1.0 mm.
➆ Screw size
Blank : M2.5≈0.54 (standard)
U : #4-40UNC
U2 : #2-56UNC
➇ Contact plating
Blank : Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
Screw size
● Dimensions
Part No.
37.2
52.5
63.9
31.2
46.5
57.9
15.24
30.48
41.91
19.46
34.7
46.13
27.05
42.29
53.72
PCS-XE26SPF( )( )( )
PCS-XE50SPF( )( )( )
PCS-XE68SPF( )( )( )
AB
CDE
25.46
40.7
52.1
F
13.2
4.4 5.5
2.541.5
10.5
5.54
1.27
C
D
C
A
B
POS.#2
POS.#2 POS.#1
LAST POS.
POS.#1
1.27
LAST POS.
4-R1
F
7
5.4
0.85
E
Cable cover for discrete wire
Cable cover for flat cable
Note 1: This 26-contact connector is not available
for screw size, #4-40UNC or #2-56UNC.
For 68-contact
connector
➀
➃
➄
➁
➂➅
15˚
Because some combinations of “Configurations of Product
Part No.”, are under consideration for development, please
contact us for availability details.
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
For cable
IDC (0.635 mm)
SCSI-II
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
Required tools: Locator tool, MLPT-0004A for 68 contacts or MLPT-0004B for 50 contacts
IDC type female connector for panel
PCS-XED( )( )FA( )( )+
➀➃➄➆➁➂ ➅
PCS-XED ( ) ( ) F A ( ) ( )+
➀ Series name
➁ No. of contacts: 50 or 68
➂ Strain relief
Blank: Not provided
R : Provided
➃ Type of contact
F: Female
➄ Cable size
A: AWG#30(7 / 0.1) For flat cable
➅ Screw size
Blank: M2.5≈0.54 (standard)
U : #4-40UNC
U2 : #2-56UNC
➆ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
● Components
➀
➁
➂
➃
➄
➅
➆
Contacts
Insulator
Shell A
Shell B
Cable housing A
Cable housing B
Strain relief
● Dimmensions
Part No.
52.5
63.9
46.5
57.9
30.48
41.91
34.7
46.13
42.29
53.72
PCS-XED50( )FA( )( )
PCS-XED68( )FA( )( )
AB
CDE
31.115
42.545
F
42.1
53.47
G
37.79
49.22
H
39.49
50.92
J
Part No.
M2.5≈0.45
#4-40UNC
#2-56UNC
Screws size
1
26
2
27
24
49
25
50
1
2
3
4
47
48
49
50
PCS-XED( )( )FA( )+
PCS-XED( )( )FAU( )+
PCS-XED( )( )FAU2( )+
A
B
C
1.27
D
4-R1
POS.#1
POS.#2
LAST POS.
7.0
2.54
5.54
8.2
F
G
E
0.85
0.635
5.4
5.5
1.5
4.99
7.85
H
J
2.02.5
➀
➃
➄
➁
➂
➆
➅
15˚
IDC direction
Conductor No.
Terminal No.
● Terminal-to-conductor
connection (In case of the
50-contact connector)
Screw size
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
POS.# Marking
(4 PLCS)
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
IDC type female connector for panel
PCS-XED68( )FAUN( )+
1.27 mm pitch connector
For cable
IDC (0.635 mm)
SCSI-III
● Configuration of product Part No.
Mating connectors: PCS-XE series IDC type male connector for cable
Required tools: Locator tool, MLPT-0004A for 68 contacts or MLPT-0004B for 50 contacts
➀➃➅➄➆➇➁➂
PCS-XED 68 ( ) F A U N ( )+
➀ Series name
➁ No. of contacts: 68
➂ Strain relief
Blank: Not provided
R : Provided
➃ Type of contact
F: Female
➄ Cable size
A: AWG#30(7 / 0.1) For flat cable
➅ Screw size
U: #4-40UNC
➆ Lock type
N: Screw lock
➇ Contact plating
Blank: Min. 0.2 μm Gold plating
G1 : Min. 0.76 μm Gold plating
● Components
➀
➁
➂
➃
➄
➅
➆
Contacts
Insulator
Shell B
Shell A
Cable housing A
Cable housing B
Strain relief
0.635≈(68-1)=42.545
53.47
0.635
5.4
4.99
7.85
HONDA
JAPAN
63.9
57.9
1.27≈(34-1)=41.91
1.27
46.13
4-R1
POS.#1
POS.#2
LAST POS.
2.54
5.54
8.2
134
3568
49.22
50.92
2.0
2.5
1
35
2
36
33
67
34
68
1
2
3
4
65
66
67
68
Conductor No.
Terminal No.
● Terminal-to-conductor
connection
➀
➃
➄
➁
➂
➆
➅
15˚
IDC direction
Screw size
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
Backshell
Vertical
EMI-filtered
● Configuration of product Part No.
EMI-filtered vertical type die-cast material backshell
for standard cable
PCS-E( )L( )
➀➃➁➂
PCS-E ( ) L ( )
➀ Series name
➁ No. of contacts: 20, 28, 36, 50 or 68
➂ Type of backshell
L: Vertical type backshell for standard cable
➃ Identification mark (A, B or C) of cable-end-outlet dimension.
Cable diameters for reference purposes are shown in the Dimension table
as below.
For use with connector: PCS-E series IDC type or soldering type female connector for cable
PCS-XE series IDC type male connector for cable
● Components
➀
➁
➂
➃
➄
➅
Cover A
Cover B
Latch
†Small-sized Phillips flat head screw
Cable clamp
†Small-sized Phillips head screw
● Dimensions
Part No.
30.0
35.0
40.2
48.9
60.3
20.3
25.3
30.5
39.2
50.6
ø5.5
ø7.5
ø4.3 ≠ ø8.7
ø5.5, ø5.9
ø9
ø8.4, ø9
ø7.3, ø8
ø8.1
6≈5
8≈7
10.3≈8.5
6.5≈5
9.5≈8.5
9.5≈8
8.5≈7
8.5≈7.5
PCS-E20LA
PCS-E20LB
PCS-E20LC
PCS-E28LA
PCS-E28LB
PCS-E36LA
PCS-E50LA
PCS-E68LA
AB C
Outside diameter of cable
for reference purposes
3210
A
C
B➀
➃
➄
➁
➂
➅
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
1.27 mm pitch connector
Backshell
Vertical
EMI-filtered
● Configuration of product Part No.
Mating guide structure vertical type die-cast material backshell
for standard cable
PCS-E( )LG( )
➀➃➁➂
PCS-E ( ) LG ( )
➀ Series name
➁ No. of contacts: 28, 36 or 50
➂ Type of backshell
LG: Mating guide structure vertical type backshell for standard cable
➃ Identification mark (A or B) of cable-end-outlet dimension.
Cable diameters for reference purposes are shown in the Dimension table
below.
For use with connector: PCS-E series IDC type or soldering type female connector for cable
PCS-XE series IDC type male connector for cable
● Components
➀
➁
➂
➃
➄
➅
Cover A
Cover B
Latch
Cable clamp
†Small-sized Phillips head screw
†Small-sized Phillips flat head screw
● Dimensions
Part No.
Outside diameter of cable
for reference purposes
35.0
40.2
48.9
PCS-E28LGB
PCS-E36LGA
PCS-E50LGA
ABCDE
25.3
30.5
39.2
30
34
42
16
31
39
ø9
ø7.5
ø8
8.5≈9.5
7≈7.5
7≈8.5
B
32
A
E
C
D
10
1.5
➀
➃
➄
➁
➂
➅
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Horizontal type die-cast material backshell
for standard cable
PCS-E( )W
1.27 mm pitch connector
Backshell
Horizontal
EMI-filtered
● Configuration of product Part No.
For use with connector: PCS-E series IDC type or soldering type female connector for cable
PCS-XE series IDC type male connector for cable
➀➁➂
PCS-E ( ) W
● Dimensions
Part No.
Outside diameter of cable
for reference purposes
30.0
35.0
40.2
48.9
PCS-E20W
PCS-E28W
PCS-E36W
PCS-E50W
A
ø5.6
ø6
ø8.2
ø7.8
● Components
➀
➁
➂
➃
➄
➅
Cover A
Cover B
Latch
†Small-sized Phillips flat head screw
Cable clamp
†Small-sized Phillips head screw
➀ Series name
➁ No. of contacts: 20, 28, 36 or 50
➂ Type of backshell
W: Horizontal type backshell for standard cable
25
32
A1.5
10
➀
➃
➄
➁
➂
➅
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
Backshell
Vertical
● Configuration of product Part No.
Vertical type plastic backshell for flat cable
PCS-E( )LT+
➀➂➁
PCS-E ( ) LT+
➀ Series name
➁ No. of contacts: 28, 36 or 50
➂ Type of backshell
LT: Vertical type backshell for flat cable
For use with connector: PCS-E series IDC type female connector for cable
PCS-XE series IDC type male connector for cable
● Components
➀
➁
➂
➃
➄
Cover B
Cover A
Latch
†Small-sized Phillips head screw
Hex nuts
● Dimensions
Part No.
18.3
23.4
32.2
37.0
42.2
50.9
35.0
40.2
48.9
PCS-E28LT+
PCS-E36LT+
PCS-E50LT+
AB
C
A
B
C
20 10
➀
➃➄ ➁
➂
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Vertical type die-cast material backshell
for cable extension
PCS-E( )PML( )
1.27 mm pitch connector
Backshell
Vertical
EMI-filtered
● Configuration of product Part No.
For use with connector: PCS-E( )PM( )-H
➀➁➂➃
PCS-E ( ) PML ( )
● Components
➀
➁
➂
➃
➄
Cover A
Cover B
Cable clamp
†Small-sized Phillips head screw
†Small-sized Phillips flat head
➀
➃
➄
➁
➂
D
A
C
B
2.5 27.5
3
10
2-M2.5
● Dimensions
Part No.
Outside diameter of cable
for reference purposes
37.6 27.3 8≈9.5 ø943.3
PCS-E36PMLA
A
36
BCD
No. of
contacts
➀ Series name
➁ No. of contacts: 36
➂ Type of backshell
PML: Vertical type backshell for PCS-E( )PM( )-H
➃ Outside diameter of cable for reference purpose
A: 9 mm diameter
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
Backshell
Vertical
EMI-filtered
● Configuration of product Part No.
Vertical type die-cast material backshell for standard cable
with provision for preventing misinsertion
PCS-E( )LP( )-( )+R
➀➃
➄
➁➂
PCS-E ( ) LP ( )- ( )+R
For use with connector: PCS-E series IDC type or soldering type female connector for cable
PCS-XE series IDC type male connector for cable
Accessories: Key-rivets for preventing misinsertion, PCS-E-PK+R
● Components
➀
➁
➂
➃
➄
➅
➆
Cover A
Cover B
Latch
Cable clamp
†
Small-sized Phillips
head screw
†
Small-sized Phillips
flat head screw
Key rivet
● Dimensions
Part No. AB C
Outside diameter of cable
for reference purposes
1B, 1C, 2A, 3A
1D, 2C, 3B, 4A
1E, 2D, 4B, 5A
30.0
35.0
40.2
48.9
60.3
20.3
25.3
30.5
39.2
50.6
ø5.5
ø7.5
ø5.5, ø5.9
ø9
ø10
ø8.4, ø9
ø7.3
ø8.1
ø6.5
6≈5
8≈7
6.5≈5
10≈8
11≈8
10≈8
10≈8
10≈8
7.5≈6
PCS-E20LPA-( )+R
PCS-E20LPB-( )+R
PCS-E28LPA-( )+R
PCS-E28LPB-( )+R
PCS-E28LPC-( )+R
PCS-E36LPA-( )+R
PCS-E50LPA-( )+R
PCS-E68LPA-( )+R
PCS-E68LPB-( )+R
Key-riveted
position No.
CBA
321
DCBA
4321
DCBA
4321
32
A
C
B10
1234 BA
BADC
2143
DCBA
ED BA
54
C
321
ED BA
54
C
321
For 68-contact
backshell
For 50-contact
backshell
For 20-contact
backshell
For 28-contact
backshell
For 36-contact
backshell
Key-riveted position No.
➀
➃➄
➁
➂
➆
➅
➀ Series name
➁ No. of contacts: 20, 28, 36, 50 or 68
➂ Type of backshell
LP:
Vertical type backshell for
standard cables with provision for
preventing misinsertion
➃ Identification mark (A, B or C) of
cable-end-outlet dimension.
Cable diameters for reference
purposes are shown in the
Dimension table as shown below.
➄ Key-riveted position (Refer to the
Dimension table as shown below)
for preventing misinsertion.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Vertical type die-cast material backshell for larger diameter
cable with provision for preventing misinsertion
PCS-E( )LKP( )-( )+R
1.27 mm pitch connector
Backshell
Vertical
EMI-filtered
● Configuration of product Part No.
For use with connector: PCS-E series IDC type or soldering type female connector for cable
PCS-XE series IDC type male connector for cable
Accessories: Key-rivets for preventing misinsertion, PCS-E-PK+R
➀➁➂➃
➄
PCS-E ( ) LKP ( )- ( )+R
➀ Series name
➁ No. of contacts: 36, 50, 68 or 80
➂ Type of backshell
LKP: Vertical type backshell for
larger diameter cables with
provision for preventing
misinsertion
➃ Identification mark (A, B or C) of
cable-end-outlet dimension.
Cable diameters for reference
purposes are shown in the
Dimension table as shown below.
➄ Key-riveted position (Refer to the
Dimension table as shown below)
for preventing misinsertion.
B
32
A
10
D
C
BCA
BADEC
21453
43215
● Components
➀
➁
➂
➃
➄
➅
➆
Cable clamp
†Small-sized Phillips head screw
Latch
Cover B
Cover A
†Small-sized Phillips flat head screw
Key rivet
Key-riveted
position No.
➀
➃➄
➁
➂
➆
➅
● Dimensions
Part No.
Outside diameter of cable
for reference purposes
Key-riveted
position No.
10≈11
10≈12
10≈13
10≈10
15≈13.6
30.5
39.2
50.6
58.2
1D, 2C, 3B, 4A
1E, 2D, 4B, 5A
ø8
ø10.5
ø10
ø11.5
ø12
ø10
ø9.5
ø13
40.2
48.9
60.3
67.9
11.6
15.0
PCS-E36LKPA-( )+R
PCS-E36LKPB-( )+R
PCS-E50LKPA-( )+R
PCS-E50LKPC-( )+R
PCS-E68LKPA-( )+R
PCS-E68LKPB-( )+R
PCS-E80LKPA-( )+R
PCS-E80LKPB-( )+R
AB
CD
ED BA
54
C
321
For 50,68 and 80-contact
backshell
DCBA
4321
For 36-contact
backshell
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
Backshell
Vertical
EMI-filtered
● Configuration of product Part No.
Vertical type die-cast material backshell for larger diameter
cable with mating guide for preventing misinsertion
PCS-E96LKP( )-( )+R
➀➃
➄
➁➂
PCS-E 96 LKP ( )- ( )+R
For use with connector: PCS-E series IDC type female connector for cable
PCS-XE series IDC type male connector for cable
Accessories: Key-rivets for preventing misinsertion, PCS-E-PK+R
➀ Series name
➁ No. of contacts: 96
➂ Type of backshell
LKP: Vertical type backshell for
larger diameter cables with
provision for preventing
misinsertion
➃ Identification mark (A or B) of
cable-end-outlet dimension.
Cable diameters for reference
purposes are shown in the
Dimension table as shown below.
➄ Key-riveted position (Refer to the
Dimension table as shown below)
for preventing misinsertion.
● Components
➀
➁
➂
➃
➄
➅
➆
Cover A
Cover B
Cable clamp
†Small-sized Phillips head screw
Latch
†Small-sized Phillips flat head screw
Key rivet
Part No.
Outside diameter of cable
for reference purposes
Key-riveted position No.
A
ø10
13≈7.5
ø10
ø7.5≈2
PCS-E96LKPA-( )+R
PCS-E96LKPB-( )+R
A
CBA
52
52
5.2
58
36
78.1
CDEBA
34521
11.6
10
CBED A
Cable (The dimensions are shown below.)
➀
➃
➄
➁
➂
➆
➅
● Dimensions
1E, 2D, 4B, 5A
Key-riveted position No.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Vertical type die-cast material backshell for larger diameter
cable with provision for preventing misinsertion
PCS-E96LKP1A-( )+R
1.27 mm pitch connector
Backshell
Vertical
EMI-filtered
● Configuration of product Part No.
For use with connector: PCS-E series IDC type female connector for cable
PCS-XE series IDC type male connector for cable
Accessories: Key-rivets for preventing misinsertion, PCS-E-PK+R
➀➁➂➃
➄
PCS-E 96 LKP1 A- ( )+R
A
CBA
52
36
78.1
CDEBA
34521
11.6
10
CBED A
Key-riveted position No.
➀
➃
➄
➁
➂
➆
➅
➀ Series name
➁ No. of contacts: 96
➂ Type of backshell
LKP1: Vertical type backshell for
larger diameter cables
with provision
for preventing misinsertion
➃ Identification mark (A) of cable-
end-outlet dimension.
Cable diameters for reference
purposes are shown in the
Dimension table as shown below.
➄ Key-riveted position (Refer to the
Dimension table as shown below)
for preventing misinsertion.
● Components
➀
➁
➂
➃
➄
➅
➆
Cover A
Cover B
Cable clamp
†Small-sized Phillips head screw
Latch
†Small-sized Phillips flat head screw
Key rivet
● Dimensions
Part No.
Outside diameter of cable
for reference purposes
A
10≈9 ø10
PCS-E96LKP1A-( )+R
Key-riveted position No.
1E, 2D, 4B, 5A
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
1.27 mm pitch connector
Backshell
Vertical
EMI-filtered
● Configuration of product Part No.
Vertical type die-cast material backshell for standard cable
with mating guide for preventing misinsertion
PCS-E( )LGP( )-( )+R
➀➃
➄
➁➂
PCS-E ( ) LGP ( )- ( )+R
For use with connector: PCS-E series IDC type or soldering type female connector for cable
PCS-XE series IDC type male connector for cable
Accessories: Key-rivets for preventing misinsertion, PCS-E-PK+R
➀ Series name
➁ No. of contacts: 26 or 36
➂ Type of backshell
LGP:
Vertical type backshell for
standard cables with mating
guide for preventing misinsertion
➃ Identification mark (A) of cable-
end-outlet dimension.
Cable diameters for reference
purposes are shown in the
Dimension table as shown below.
➄ Key-riveted position (Refer to the
Dimension table as shown below)
for preventing misinsertion.
Part No.
Outside diameter of cable
for reference purposes
Key-riveted
position No.
1D, 2C, 3B, 4A
35.0
40.2
25.3
30.5
30
34
16
31
ø5.5, ø5.9
ø8.4, ø9
5≈6.5
8≈9.5
PCS-E28LGPA-( )+R
PCS-E36LGPA-( )+R
AB
CD E
Key-riveted position No.
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
E
C
D
10
32
A
B
1234 BA
1.5
CADB
3142
DCBA
● Components
➀
➁
➂
➃
➄
➅
➆
Cover A
Cover B
Latch
Cable clamp
†Small-sized Phillips head screw
†Small-sized Phillips flat head screw
Key rivet
Guide position of the 28-contact backshell
➀
➃➄
➁
➂
➆
➅
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
1.27 mm pitch connector
Backshell
Horizontal
EMI-filtered
● Configuration of product Part No.
Horizontal type die-cast material backshell for standard
cable with provision for preventing misinsertion
PCS-E( )WSP-( )+R
➀➃➁➂
PCS-E ( ) WSP- ( )+R
For use with connector: PCS-E series IDC type or soldering type female connector for cable
PCR series IDC type or soldering type female connector for cable
PCS-XE series IDC type male connectors for cable
Accessories: Key-rivets for preventing misinsertion, PCS-E-PK+R
➀ Series name
➁ No. of contacts: 20, 28, 36 or 50
➂ Type of backshell
WSP: Horizontal type backshell for standard cables with mating guide for
preventing misinsertion
➃ Key-riveted position (Refer to the Dimension table as shown below) for
preventing misinsertion.
● Dimensions
Part No. AB
Outside diameter of cable
for reference purposes
1B, 1C, 2A, 3A
1D, 2C, 3B, 4A
1E, 2D, 4B, 5A
30.0
35.0
40.2
48.9
ø6
ø7.6
ø5
ø5.5
ø6
ø6.5
PCS-E20WSP-( )+R
PCS-E28WSP-( )+R
PCS-E36WSP-( )+R
PCS-E50WSP-( )+R
Key-riveted
position No.
● Components
➀
➁
➂
➃
➄
➅
Cover A
Cover B
Cable clamp
Latch A
Latch B
†Small-sized Phillips flat head screw
ABCDE
ABCD
ABC
10 A
22
ABCD
CADB
3142
3142
Key-riveted position No. The form of the 50-contact backshell
The form of the 28-contact backshell
The form of the 20-contact backshell
➀
➃
➄
➁
➂
➅10
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Horizontal type die-cast material backshell for larger
diameter cable with provision for preventing misinsertion
PCS-E( )WKP( )-( )+R
1.27 mm pitch connector
Backshell
Horizontal
EMI-filtered
● Configuration of product Part No.
For use with connector: PCS-E series IDC type or soldering type female connector for cable
PCS-XE series IDC type male connector for cable
Accessories: Key-rivets for preventing misinsertion, PCS-E-PK+R
➀➁➂➃
➄
PCS-E ( ) WKP ( )- ( )+R
● Dimensions
Part No. AB
Outside diameter of cable
for reference purposes
1D, 2C, 3B, 4A
1E, 2D, 4B, 5A
40.2
48.9
60.3
67.9
10.5≈9.5
12≈10
11≈10
10.5≈9.5
ø9.5
ø11.5
ø10.5
ø9.5
PCS-E36WKPA-( )+R
PCS-E50WKPB-( )+R
PCS-E68WKPA-( )+R
PCS-E80WKPA-( )+R
Key-riveted
position No.
➀ Series name
➁ No. of contacts: 36, 50, 68, 80
➂ Type of backshell
WKP:
Horizontal type backshell for
larger diameter cables with
mating guide
for preventing misinsertion
➃ Identification mark (A or B) of
cable-end-outlet dimension.
Cable diameters for reference
purposes are shown in the
Dimension table as shown below.
➄ Key-riveted position (Refer to the
Dimension table as shown below)
for preventing misinsertion.
● Components
➀
➁
➂
➃
➄
➅
➆
Cable clamp
†Small-sized Phillips head screw
Latch
Cover B
Cover A
†Small-sized Phillips flat head screw
Key rivet
B
11.6
10.0
12345
ABCDE
12345
A
1.5
37.0
35.5
EDCB
Key-riveted position No.
➀
➃
➄
➁
➂
➆
➅
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
1.27 mm pitch connector
Backshell
Horizontal
EMI-filtered
● Configuration of product Part No.
Horizontal type die-cast material backshell for larger
diameter cable with provision for preventing misinsertion
PCS-E96WKP( )-( )+R
➀➃➄➁➂
PCS-E 96 WKP ( )- ( )+R
For use with connector: PCS-E series IDC type or soldering type female connector for cable
PCR series IDC type or soldering type female connector for cable
PCS-XE series IDC type male connector for cable
Accessories: Key-rivets for preventing misinsertion, PCS-E-PK+R
➀ Series name
➁ No. of contacts: 96
➂ Type of backshell
WKP: Horizontal type backshell for larger diameter cables with mating
guide for preventing misinsertion
➃
Identification mark (B) of cable-end-outlet dimension.
Cable diameters for reference purposes are shown in the Dimension table
as shown below.
➄
Key-riveted position (Refer to the Dimension table as shown below) for
preventing misinsertion.
● Dimensions
Part No. AB
Outside diameter of cable
for reference purposes Key-riveted
position No.
1096 15 ø10 1E, 2D, 4B, 5A
PCS-E96WKPB-( )+R
No. of
contacts
54 321
10.0
B
12345
78.1
43.2
1.5
EDCBA
11.6
A
ABCDE
● Components
➀
➁
➂
➃
➄
➅
➆
Cable clamp
†Small-sized Phillips head screw
Latch
Cover B
Cover A
†Small-sized Phillips flat head screw
Key rivet
Key rivet
(Option)
Key-riveted position No.
➀
➃
➄
➁
➂
➆
➅
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Vertical type die-cast material backshell for flat cable
with provision for preventing misinsertion
PCS-E( )LTP-( )+R
1.27 mm pitch connector
Backshell
Vertical
● Configuration of product Part No.
For use with connector: PCS-E series IDC type female connector for cable
PCS-XE series IDC type male connector for cable
Accessories: Key-rivets for preventing misinsertion, PCS-E-PK+R
➀➁➂➃
PCS-E ( ) LTP- ( )+R
➀ Series name
➁ No. of contacts: 50 or 68
➂ Type of backshell
LTP: Vertical type backshell for flat cables with mating guide for preventing
misinsertion
➃ Key-riveted position (Refer to the Dimension table as shown below) for
preventing misinsertion.
● Dimensions
Part No. AB
C
Key-riveted
position No.
50.9
62.3
48.9
60.3 1E, 2D, 4B, 5A
PCS-E50LTP-( )+R
PCS-E68LTP-( )+R
32.2
43.5
● Components
➀
➁
➂
➃
➄
➅
➆
Cover B
Cover A
Latch
Cable clamp
†Small-sized Phillips head screw
Hex nuts
Key rivet
EDCBA
20
B
C
10
A
EDCBA
EDCB
A
54321
Key-riveted position No.
➀
➃➄ ➁
➂
➅
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
1.27 mm pitch connector
Backshell
Vertical
SCSI-III
● Configuration of product Part No.
Vertical type die-cast material backshell for
larger diameter cable
PCS-E68LKAU2N
➀➃➅➄➁➂
PCS-E 68 LK A U2 N
For use with connector: PCS-E series IDC type female connector
PCS-XE series IDC type male connector for cable
➀ Series name
➁ No. of contacts: 68
➂ Type of backshell: Vertical type backshell for lager diameter housing
➃
Identification mark (A) of cable-end-outlet dimension. Cable diameters for
reference purposes are shown below.
➄
Screw size
U2: #2
-
56UNC
➅
Lock type
N: Screw lock
Screw size
Part No.
#2-56UNC
PCS-E68LKAU2N
● Components
➀
➁
➂
➃
➄
➅
Cable clamp
†Small-sized Phillips head screw
Thumb screw
Cover A
Cover B
†Small-sized Phillips flat head screw
ø12.5
ø12.2
57.9
63.8
JAPAN
LKA JAPAN
LKA
17.5
32
382.85
13.9
10.0
7.3
Screw size
Cable diameters
for reference purposes
Assembly Diagram Connector
➀
➃
➄
➁
➂
➅
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Vertical type over-molded backshell
PCS-XEM( )DL( )( )N
1.27 mm pitch connector
Backshell
Vertical
SCSI-III
● Configuration of product Part No.
For use with connector: PCS-E series IDC type female connector
PCS-XE series IDC type male connector for cable
➀➁➂➃➄➅
PCS-XEM ( ) DL ( ) ( ) N
➀ Series name
➁ No. of contacts: 50 or 68
➂ Type of backshell
DL: Vertical type backshell
➃ Color of hood
Blank: Black
1 : Beige
2 : Green
3:Grey
➄ Screw size
Blank: M2.5≈0.45
U : #4-40UNC
U2 : #2-56UNC (standard)
➅
Lock type
N: Screw lock
● Components
➀
➁
➂
➃
➄
➅
➆
Cable clamp
†Small-sized
Phillips head screw
Caps
Seal A
Seal B
Screw lock
Hood
Screw size
● Dimensions
Part No.
Part No.
Outside diameter of cable
for reference purposes
ABCDE
17.6
19.3
ø10.5
ø12.2
PCS-XEM50DL( )( )N
PCS-XEM68DL( )( )N
ø11
ø12.7
54.0
65.43
46.5
57.9
14.0
15.7 M2.5≈0.45
#4-40UNC
#2-56UNC
PCS-XEM( )DL( )N
PCS-XEM( )DL( )UN
PCS-XEM( )DL( )U2N
D
C
A
B
11.2
2.85
23.0
46.0
14.0
E
Screw size
➀
➃
➄
➁
➂
➆
➅
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
1.27 mm pitch connector
Backshell
Vertical
Screw locks
● Configuration of product Part No.
Vertical type over-molded backshell
PCS-XEM100L( )( )
➀➃➄➁➂
PCS-XEM 100 L ( ) ( )
For use with connector: PCS-XE series IDC type male connector for cable
➀ Series name
➁ No. of contacts: 100
➂ Type of backshell
L: Vertical type backshell
➃
Color of hood
Blank: Black
1 : Beige
➄
Screw size
Blank: #4
-
40UNC
U2 : #2
-
56UNC
● Components
➀
➁
➂
➃
➄
➅
Cable clamp
†Small-sized Phillips head screw
Hood
Fastening screw
Shield B
Shield A
Screw size
● Dimensions
Part No.
Outside diameter of cable
for reference purposes
#4-40UNC
#2-56UNC
#4-40UNC
#2-56UNC
ø13.2
PCS-XEM100L
PCS-XEM100LU2
PCS-XEM100L1
PCS-XEM100L1U2
Black
Beige
Color of housing
40
20
ø13.4
72
85.1
78.23
3.5
2.8 12.5 10
14
37
10.8
16
51 REF.
➀
➃
➄
➁
➂
➅
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Vertical type die-cast material backshell
for daisy chain connection
PCS-SE68LDAU2N
1.27 mm pitch connector
Backshell
Vertical
SCSI-III
● Configuration of product Part No.
For use with connector: PCS-XES series soldering type male connector for cable
Mating connector: P/N: PCS-XES68MS
➀➁➂➃➄➅
PCS-SE 68 LD A U2 N
16.4 ø11.5
57.9
63.8
#2-56UNC
ø11
55
45
25
2.85
13.2
5
11.4
➀
➁
➂
➃
➄
➅
➀ Series name
➁ No. of contacts: 68
➂ Type of backshell
LD: Vertical type backshell
➃ Identification mark (A) of cable-end-outlet dimension.
➄ Screw size
U2: #2-56UNC
➅
Lock type
N: Screw lock
● Components
➀
➁
➂
➃
➄
➅
Cable clamp
†Small-sized Phillips head screw
Thumb screw
Case B
Case A
†Small-sized Phillips head screw
Cable diameters
for reference purposes
Assembly Diagram Connector
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
1.6 mm panel-thickness mating guide
PCS-E( )G
1.27 mm pitch connector
Accessories
Mating guide
● Configuration of product Part No.
For use with connector: PCS-E series vertical type or horizontal type housing
➀➁➂
PCS-E ( ) G
● Dimensions
Part No.
37.3
42.3
47.6
56.3
ABCDE F
30.7
35.7
40.9
49.6
11
16
20
30
27.4
32.5
37.6
46.5
23.7
28.8
33.9
42.8
11.3
16.3
20.3
30.3
PCS-E20G
PCS-E28G
PCS-E36G
PCS-E50G
7.2
10.8
16.5
B
A
11.0
15.0
C
14.5 REF.
122.5
t=1.6
1.5
E
F
D
2.8
R1.4
7.5
15+0.15
0
Recommended panel cut-out dimensions
For panel
➀ Series name
➁ No. of contacts: 20, 28, 36 or 50
➂ 1.6 mm panel-thickness mating guide
(Color: Silver metallic)
Because some combinations of “Configurations of Product Part
No.”, are under consideration for development, please contact
us for availability details.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
1.27 mm pitch connector
Accessories
Mating guide
● Configuration of product Part No.
1.0 mm panel-thickness mating guide
PCS-E( )G1
➀➁➂
PCS-E ( ) G1
For use with connector: PCS-E series vertical type housing for standard cable or heavy wire cable with mating guide
➀ Series name
➁ No. of contacts: 20, 28, 36, 50 or 68
➂ 1.0 mm panel-thickness mating guide
● Dimensions
Part No.
37.3
42.3
47.6
56.3
67.7
ABCDEFG
30.7
35.7
40.9
49.6
61.0
11
16
20
30
40
33.0
38.1
43.2
52.1
63.5
27.4
32.5
37.6
46.5
57.9
23.7
28.8
33.9
42.8
54.1
11.3
16.3
20.3
30.3
40.3
H
25
30
34
42
52
J
8
16
31
39
49
PCS-E20G1
PCS-E28G1
PCS-E36G1
PCS-E50G1
PCS-E68G1
G
F
E
2.8
R1.4
7.5
15
+0.15
0
B
H
A
11.0
12.2
15.0
J
C1.7
12.5
10.4
121.9
13.9 REF.
1.6
t=1.0
9.9
10.5
16.5
0.9
4
D
Recommended panel cut-out dimensions
For panel
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Metallic mating guide
PCS-E( )G3( )
1.27 mm pitch connector
Accessories
Mating guide
● Configuration of product Part No.
For use with connector: PCS-E series vertical type housing for standard cable or heavy wire cable
PCS-E series of horizontal type housing for standard cable or heavy wire cable
➀➁➂➃
PCS-E ( ) G3 ( )
➀ Series name
➁ No. of contacts: 20, 28, 36, 50 or 68
➂ Metallic mating guide
➃
Guide plating
Blank: No plating
N : Nickel plating
● Dimensions
Part No.
33
38
43.1
52
63.4
PCS-E20G3( )
PCS-E28G3( )
PCS-E36G3( )
PCS-E50G3( )
PCS-E68G3( )
ABCDE F
31
36.1
41.2
50.1
61.5
30.5
35.6
40.7
49.6
61.0
27.4
32.5
37.6
46.5
57.9
22.6
27.7
32.8
41.7
53.1
23.7
28.8
33.9
42.8
54.2
one side4
one side5
one side6
one side8
No. of
dimples
7.2
E
D
C
B
A
F
R1.5
(R1.75)
2.8
7.5
10.7
11.2 MAX.
(R2.75)
ø2.6
10
Note 1: Panel thickness: 1-1.6 mm
Dimples
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
Key rivet for preventing misinsertion
PCS-E-PK+R
1.27 mm pitch connector
Accessories
Key rivet
● Configuration of product Part No.
For use with backshell: PCS-E series vertical type backshell or horizontal type backshell with provision for preventing misinsertion
➀➁
PCS-E- PK+R
0.7
1.65
ø1.95
ø3
Caulk rivet
(Use specialized tool.)
➀ Series name
➁ Key rivet for preventing misinsertion
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
1.27 mm pitch connector
Accessories
Misinsertion prevention guide
● Configuration of product Part No.
Misinsertion prevention guide
PCS-E( )PG-( )
➀➁➂➃
PCS-E ( ) PG- ( )
For use with connector: PCS-E series right-angle through hole type male connector for PCB
PCR-E series right-angle through hole type male connector for PCB
Mating backshell: PCS-E series of backshell with provision for preventing misinsertion
➀ Series name
➁ No. of contacts: 20, 28, 36, 50, 68 or 80
➂ Misinsertion prevention guide
➃
Locations being cut off the key forms for preventing misinsertion
● Dimensions
Part No.
Standard locations being cut off the key
forms for preventing misinsertion
32.6
37.7
42.8
51.7
63.1
70.7
PCS-E20PG-( )
PCS-E28PG-( )
PCS-E36PG-( )
PCS-E50PG-( )
PCS-E68PG-( )
PCS-E80PG-( )
ABC
30.3
35.3
40.5
49.2
60.6
68.2
27.4
32.5
37.6
46.5
57.9
65.5
1B, 1C, 2A, 3A
1D, 2C, 3B, 4A
1E, 2D, 4B, 5A
C
A
4-R1
7.5
10.1
1.5 1.1 REF.
2-R2.1
2-R1.3
1.1
1.5
3.7
B
6
M2.5
0.8
ø4
1.7
0.2 MAX.
1234
ABCD
1234
ABCD
12345
12345
ABCDE
ABCDE
12345
ABCDE
1234
ABCD
123
ABC
12 34
AB CD
For 20-contacts
For 28-contacts
For 36-contacts
For 50-contacts
For 68-contacts
For 80-contacts
Note 2: Designate the location No. in parentheses
(¢) for "Configuration of product part
numbers." (Standard locations being cut off
the key forms for preventing misinsertion
are shown in the Dimension table.)
Example: PCS-E36G4-1D
Key No.
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
Note 1: When a panel is not used, use the spacer hardware, PCS-E( )M-SP.
Directional form
Attached small screw
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Misinsertion prevention guide
PCS-E96PG-( )
1.27 mm pitch connector
Accessories
Misinsertion prevention guide
● Configuration of product Part No.
For use with backshell: PCS-E series backshell with provision for preventing misinsertion. PCS-E96LKP( )-( )
➀➁➂➃
PCS-E 96 PG- ( )
ABCDE
1 2345
8 8 8 8
5
1.7
4.7
7.6
2.5
2.1
10.1
7.51.5
3-R1
78.4
80.9
75.69
52
58
2-R1.3
2-R2.1
12345
ABCDE
60.8
ø4
M2.5
Key No.
Directional form
Note1: Designate one of location numbers below in parentheses
(¢) for "Configuration of product part numbers."
(Standard locations being cut off the key forms for
preventing misinsertion are shown below.)
Location No.: 1E, 2D, 4B or 5A
Example: PCS-E96PG-1E
Attached small screw
➀ Series name
➁ No. of contacts: 96
➂
Misinsertion prevention guide
➃
Locations being cut off the key forms for preventing misinsertion
Because some combinations of “Configurations of Product Part No.”, are under
consideration for development, please contact us for availability details.
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
1.27 mm pitch connector
Accessories
Spacer hardware
● Configuration of product Part No.
Spacer hardware for male connector
PCS-E( )M-SP
➀➁➂
PCS-E ( ) M-SP
For use with connector: PCS-E series right-angle through hole type male connector for PCB
PCR-E series right-angle through hole type male connector for PCB
➀ Series name
➁ No. of contacts: 20, 28, 36, 50, 68 or 96
➂ Spacer hardware for male connectors
C
B
A
7.5
10
2.6
2-R1.3
● Dimensions
Part No.
32.8
37.9
43.0
51.9
63.3
81.1
27.4
32.5
37.6
46.5
57.9
75.69
22.8
27.9
33.0
41.9
53.3
71.1
PCS-E20M-SP
PCS-E28M-SP
PCS-E36M-SP
PCS-E50M-SP
PCS-E68M-SP
PCS-E96M-SP
ABC
Use this spacer hardware for male connectors, when a panel is not used.
Plate thickness: 1.0 mm.
Others Wire
wrapping Crimping Soldering IDC Press-in SMT Through
hole
Screw lock
PCS-XE50SJ( )U2
1.27 mm pitch connector
Accessories
Screw locks
SCSI-III
● Configuration of product Part No.
For use with backshell: PCS-E series Backshells with provision for preventing misinsertion
➀➁➂
PCS-XE 50 SJ( ) U2
Part No.
8.9
5.5
3.9
4.5
2.7
4.1
3.5
–
1.1
PCS-XE50SJ1U2
PCS-XE50SJ5U2
PCS-XE50SJ6U2
AB
CDE F G
3
2.9
3
–
0.8
#2-56UNC
4.75
5.48 REF.
F
G
E
D
B C
A
#4-40UNC
Note 1: SJ1 and SJ5 types are not slotted.
● Dimensions
➀ Series name
➁ Kinds of screw locks
SJ1: The type not mounted on panel (Male screw size, #4-40UNC)
SJ5: The type mounted on 1.6 mm panel (Male screw size, #4-40UNC)
SJ6: The type mounted on 1.0 mm panel (Male screw size, #4-40UNC)
➂ Female screw size
U2: #2-56UNC
Others
Wire
wrapping
CrimpingSolderingIDCPress-inSMT
Through
hole
