High Function Touch Screens - NT21 / NT31 / NT631 Software Get the Most from Your Omron PLCs NT21/31/631 The NT21/NT31/NT631 operator interface products create superior Omron PLC solutions by taking advantage of features that other HMI products simply cannot offer in an Omron system. Our HMI products are designed with the same attention to quality and performance that go into our broad line of industry leading PLCs. Omron's NT21/31/631 also offer significant programming flexibility in object layout and PLC controls, allowing you to create the program needed to realize your operator interface vision. * High-Speed NT Link - This 115 kbaud serial Omron protocol allows rapid data exchange with Omron CJ1 and CS1 PLCs. NT20S/600S * NT Link 1:N - At 38.4 and 115 kbaud, NT Link 1:N allows 8 screens to be connected to a single serial port on CJ1 and CS1 PLCs with minimal impact to performance. * PLC Programming Console - Simulate a hand-held programming device right on the HMI screen and monitor, set PLC values, and make minor ladder program changes. NT11S * PLC Device Monitor - This function allows the NT31 and NT631 to function as watch windows, where the user can specify and view banks of PLC addresses, change values, and view errors without opening the panel. * Pop-Up Windows - Present up to two pop-up windows at a time on the HMI screen to control critical information in a timely manner. NT2S * Window Control Area - Control pop-up windows from the PLC memory by manipulating the window control area. * Parent/Child Windows - Create screen segments that can be used again and again throughout a project. This conserves both screen memory and programming effort. * Same programming functionality available in 5.2", 5.7", 10.4", and 11.3" screen sizes. Multi-Vendor Communications Standardize on Omron's high quality touch screens regardless of which PLC vendors you use. Our drivers and vendor-specific cables allow Omron's NT31 and NT631 touch screens to communicate with the PLCs from the following vendors: * Omron (CV, CS1, CJ1, CPM1A, CPM2, SRM1) * Allen-Bradley (ML1000/1200/1500, SLC 5/00, 5/01, 5/02, 5/03, 5/04, 5/05) * GE Fanuc Series 90-20 and 90-30 PLCs Technical Highlights * DeviceNet communication module available for NT31 and NT631. * Mitsubishi A and FX series PLCs * Supports multi-vendor communication, allowing Omron touch screens to be the standard HMI. * Modicon Micro, Premium, Quantum, Momentum * Memory module can be set to automatically upload or download both screen data and system firmware. * Analog data can be displayed in chart, bar graph, and needle gauge objects. * Binary status can be shown with lamps, animated bitmaps, and alarm bits. * Siemens S7-300 and S7-400 PLCs OMRON Data Comparison Relative Response Speed for Communications with Single PT Connected Host Link NT Link High-Speed NT Link High-speed NT Link highlights the advantages that come when you partner an Omron PLC with an Omron touch screen. Combine Omron's CS1-EV1 PLCs with NT21/31/631 to benefit from 115k baud serial communications tailored exclusively for PLC to touch screen data. It is almost twice as fast as Host Link and 25% faster than standard NT Link when a single NT unit is connected to a PLC serial port. High-speed NT Link is three times faster than standard NT Link with 8 NT units connected to a single CS1 or CJ1 serial port. High-speed NT Link 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Relative Response Speed for Communications with Eight PTs Connected NT Link High-speed NT Link 0.0 Three times faster 0.5 1.0 1.5 2.0 2.5 3.0 All data was measured at the RS-232C port of the CPU Unit with the response speed for a single NT Unit connected taken as 1. 14 Software NT21 / NT31 / NT631 DeviceNet NT20S/600S NT21/31/631 The NT31 and NT631 can be quickly configured for DeviceNet communications, integrating seamlessly into your open DeviceNet network. This is truly a multi-vendor PLC solution, since no modifications need to be made to the screen data when changing the brand of the DeviceNet master. (See the DeviceNet Technical Discussion in the Technical Highlights of this catalog for detailed specifications.) NT11S NT Link 1:N Communication Technical Highlights NT2S This protocol allows multiple interfaces to be connected to one PLC communication port. It is available with both standard and high speed NT Link. This protocol allows you to create a multidrop system that puts up-to-the-second data at locations along the production line. (See the NT Link section in the Technical Highlights of this catalog for more details and specifications.) Memory Link Directly connect the NT with a single board computer, PLC or personal computer via RS-232C or RS-422 communications using Memory Link. This protocol allocates a virtual memory area within the operator interface to store data values. The screen program references this internal memory area for all screen objects, just as though this memory area belonged to a PLC. This means your PC based device only has to be concerned with referencing this memory area to read and write data values. (See the Memory Link section in the Technical Highlights at the end of this catalog for more details.) 15 NT21 / NT31 / NT631 Software Recipe Data NT21/31/631 Recipes store rows of values within the NT memory and operators can send that information down to the PLC to configure it for a batch operation. The new Recipe Table editor in NTST v4.6 creates and manages recipe information, allowing recipe data to be up- or downloaded from the NT hardware. NTST can also work with comma separated variable files to read in large recipe tables, or store uploaded recipe data for future reference or use. NT20S/600S NT11S Background Math Function NT2S NT31/631 units store a Mathematical Table that allows functions of different formats to run in the background of the NT31/631 units. The equations can be constructed of constants, values from NT31/631 memory, or values from PLC memory locations. Calculation results can be sent to NT31/631 internal memory or directly to the PLC memory. Now you can convert values for display purposes within the display device, leaving the PLC to worry about calculations that affect your process. Technical Highlights Input Enable - Bit Interlock Function This function is suited for use as a password protection function. The interlock function denies access to input objects (touch switches, thumb-wheels, numeric input fields, and string input fields) based on the status of a bit in the PLC. Each input object within an NT31/631-EV2 project can be assigned to a unique bit or the same bit within the PLC. If the bit is ON, the input object will function. Turn the bit OFF and the input object is locked out. An excellent application of this feature would be login security. When the operator enters a password using a keypad, the PLC will compare the entered number to the values in certain PLC memory registers. The PLC can then change the referenced bits from 0 to 1 accordingly, granting access to different screen areas or input objects as designated by the user's access level. 16 Software NT21 / NT31 / NT631 Pop-Up Windows NT11S NT20S/600S NT21/31/631 Two window screens can be displayed in one standard screen, maximizing screen space and application efficiency. All objects (except thumb-wheel switches) can be displayed within these popup windows allowing operators to simultaneously view different aspects of the process as needed. Create a variety of pop-up window screens and call them up for display in your application as needed, either manually or from PLC memory. Alarm History, Frequency, and Activity Technical Highlights NT2S Track your process and create a fault record using the alarm history, frequency and activity functions. These pop-up windows graphically convey problems in your process and allow you to make corrections to save time and materials. Simply drag the alarm object into the touch screen project, create a PLC bit reference in an alarm bit table, add a message to that bit, and the NT21/NT31/NT631 are ready to track and report alarms. The complete alarm history and frequency reports can be printed from the system menus. Memory Unit This portable FLASH memory module includes two 1MB banks. Each bank can store the screen data from a fully loaded operator interface, or the firmware program for the NT21, NT31 or NT631. The module can be set for manual or automatically triggered upload or download of data. In fact, the module can be configured to first download a new firmware program and then to automatically download new screen data. Imagine how easy it would be to update customers in the field! No PC connection is needed. Just plug on the module, power up the touch screen and transfer the programs. Programming Console When using an Omron PLC and NT-Link communications, this feature allows you to adjust mnemonic programming and access, monitor, and change individual memory addresses using the operator interface instead of a laptop or hand-held programmer. Now, maintenance personnel no longer need to carry a hand-held programmer or laptop from PLC to PLC to perform diagnostics. It can be performed right from the front of the operator interface without ever opening the control panel. 17 NT21 / NT31 / NT631 Software Device Monitor Function NT21/31/631 Another feature available on the NT31/631 when using an Omron PLC, the Device Monitor Function allows the NT to monitor tables of individually selected PLC values, or entire ranges of a PLC memory area. Once the values or ranges are selected, data values can be viewed in real time as they change. There is also a window to view errors currently active within PLC memory. Previously, only the PLC programming software could perform these diagnostics. Now, no laptop is needed for these basic debugging tools. NT20S/600S Registration Monitor - Manually create a list of PLC addresses and simultaneously monitor them. Update the different values by touching the address and entering a new value with a popup keypad. PLC Error Screen - View the current errors in the PLC. Continuous Monitor - Create a table of 50 PLC addresses to monitor and change. Simply select the initial address, and the table automatically fills in with the next (25 for NT31, 50 for NT631) sequential addresses. NT11S NT2S Images and Art Objects Technical Highlights Bitmap images can be displayed as fixed objects or image lamps. Image lamps have an ON state and OFF state, each represented by a different bitmap. Image objects display bitmap images from the image table stored within the operator interface. This can be a fixed reference to one image table location, or the reference can be controlled by the PLC. This is an excellent way to quickly achieve animation. Touch Switches and Lamps The original purpose of touch screens was to provide a cost effective replacement for hardwired pushbutton and selection switches and indicator lamps. This is still one of the primary motivations on panels today. The NT31 and NT631 include a variety of touch switch and lamps, as well as a library of image objects to lend that special touch. Omron touch switches and lamps include a higher degree of control than most touch screen products, allowing the objects to be sized, colored, and positioned as needed. There are also many labeling options available: * Control bits * Control pop-up windows * Switch screens * Copy values * Input numeric & text * Move the cursor characters * Execute a screen print 18 Software NT21 / NT31 / NT631 Dynamic Labels NT21/31/631 The labels within touch switches and lamps can change with bit state, display a numeric value from PLC memory, or display any number of messages directly from a string table as commanded by the PLC. The string table is a numbered list where each table entry represents a different string message. The PLC can specify a string table entry number and change the message displayed within a switch or lamp, creating a great deal of application flexibility. NT20S/600S Numeric and String Display NT11S Numeric values can be displayed as bar graphs, needle meters, or simple formatted numerals. All of these options are highly customizable, and can be located anywhere on the screen. Strings can be displayed as alphanumeric characters read from the string table in the operator interface memory as directed by the PLC, or taken directly from PLC memory. Graphical Data Display NT2S Use colorful charts and graphs to convey complex data to your operators at a glance. Chart data can be logged for review of previous activity. The NT31 and NT631 series interfaces have a dedicated printer port, an RS-232C port with a 5vdc pin, and a port that is configured to RS-232C, RS-422/485 (the NT631 uses a terminal block for RS-422/485 connection). The dedicated RS-232C port is generally left available to ensure a free port for program transfer. The dedicated RS-232C port is also available for connection to a bar-code reader (Omron serial driver only). The NT21 series interface has two RS-232C ports. One port can be converted to RS-422/485 using the NS-AL002 adapter. Technical Highlights Communication Ports NT21 NT631 NT31 NT21 Compact Design NT31 The shallow depths, efficient face dimensions, and small panel cutout requirements make this NT series ideal for mounting in confined spaces. NT631 19 NT21 / NT31 / NT631 Software Ordering Information NT21/31/631 Description NT21 Display Monochrome STN LCD 5.2" touch screen NT21 Accessories 5 NT21 Protective Screen Sheets NT21 Chemical Resistant Cover RS232C to RS422A Adapter NT31 Display Monochrome STN LCD 5.7" touch screen 8 Color STN LCD 5.7" touch screen NT31 Accessories NT30/NT31 Chemical Resistant Cover 5 NT30/NT31 Protective Screen Sheets NT31/NT31C Replacement Backlight 50 cm 25-9PIN Cable, NT to Omron PLC 3 m 25-9PIN Cable, NT to Omron PLC 5 m 25-9PIN Cable, NT to Omron PLC 3 m 25-9PIN Cable, NT to AB PLC 3 m 25-9PIN Cable, NT to GE PLC 3 m 25-9PIN Cable, NT to Siemens 3 m 25-9PIN Cable, NT to Mitsu-A 3 m 25-9PIN Cable, NT to Mitsu-FX Part Number NT21-ST121-E NT20M-KBA04 NT20S-KBA01 NS-AL002 NT31-ST121-EV2 NT31C-ST141-EV2 NT20S/600S NT11S NT30-KBA01 NT30-KBA04 NT31C-CFL01 NT31C-CN510-EU NT31C-CN320-EU NT31C-CN520-EU NT31C-CN321-EU NT31C-CN322-EU NT31C-CN323-EU NT31C-CN324-EU NT31C-CN325-EU NT21 Dimensions mm (inches) NT2S Description NT631 Display Electroluminescent 10.4" touch screen 8 Color STN LCD 11.3" touch screen 8 Color TFT LCD 10.4" touch screen NT631 Accessories NT631C-ST141 Replacement Backlight NT631C-ST151 Replacement Backlight NT631 Chemical Resistant Cover 5 NT631 Protective Screen Sheets General Accessories NT Series Support Tool v 4.6 Programming Cable 9-9 pin 50 cm 9-9PIN Cable, NT to Omron PLC 3 m 9-9PIN Cable, NT to Omron PLC 5 m 9-9PIN Cable, NT to Omron PLC 2 m 9PIN Cable, NT to AB DH-485 Port 3 m 9-9PIN Cable, NT to AB PLC 3 m 9-9PIN Cable, NT to GE PLC 3 m 9-9PIN Cable, NT to Siemens 3 m 9-9PIN Cable, NT to Mitsu-A 3 m Term-25PIN Cable, NT to Mitsu-FX 2 m CS1/CJ1/CPM2C Peripheral Com. Cable 5 m CS1/CJ1/CPM2C Peripheral Com. Cable NT to Printer Cable NT31/NT631 Program Transfer Module 30W, 24 VDC, 1.3 A Power Supply 50W, 24 VDC, 2.1 A Power Supply Operation Manuals NT21 Set-Up Manual NT31 Set-Up Manual NT631 Set-Up Manual NT21/31/631 Reference Manual Technical Highlights NT31 Dimensions Part Number NT631-ST211-EV2 NT631C-ST141-EV2 NT631C-ST151-EV2 NT631C-CFL01 NT631C-CFL02 NT625-KBA01 NT610C-KBA04 NT-ZJCAT1-EV4 C200H-CN229-EU C200H-CN510-EU C200H-CN320-EU C200H-CN520-EU NT631C-CN221-485 NT631C-CN321-EU NT631C-CN322-EU NT631C-CN323-EU NT631C-CN324-EU NT631C-CN325-EU XW2Z-200T-2 XW2Z-500T-2 NT-CNT121 NT-MF261 S82K-03024 S82K-05024 V068-E1-1 V062-E1-1 V063-E1-1 V069-E1-1 NT631 Dimensions mm (inches) 142 (5.59) 195 (7.68) 5 (0.20) 130.5 (5.14) 250 (9.84) 315 (12.40) 54 (2.13) Recommended Panel Cutout Dimensions 131 0.02 (5.16) 183.5 (7.22) 20 184 0.02 (7.24) 7.5 (0.30) 237.2 (9.34) 54 (2.13) Recommended Panel Cutout Dimensions 302.2 (11.90) 238 0.02 (9.37) 303 0.02 (11.93) NT21 / NT31 / NT631 Rated power supply voltage 24 VDC Power consumption 7 W max. Operating ambient temperature 0 to +50C (with no icing) Operating ambient humidity 35 to 85% (0 to 40C) 35 to 60% (40 to 50C) (with no condensation) Noise resistance Conforms to IEC61000-4-4; Power supply line: 2 kV Vibration resistance (operating) 10 to 57 Hz with 0.075 mm amplitude; 57 to 150 Hz with 1G (9.8 m/s2) acceleration for 60 min. in each of X, Y, Z directions NT31/31C 15 W max. 0 to +50C NT631/631C ST211 30 W max.; ST141 & ST151 18 W max. ST211 & ST151 0 to +50C; ST141: 0 to +40C NT21/31/631 NT21 Software Specifications 35% to 85% (with no condensation) Technical Highlights NT2S NT11S NT20S/600S Common mode: 1000 Vp-p (between power supply terminals & panel); Normal mode: 300 Vp-p; Pulse width of 100 ns to 1s, pulse rise time of 1 ns 10 to 57 Hz with 0.075 mm amplitude; ST211: 10 to 57 Hz with 0.075 mm amplitude for 30 min. in each of X, Y, Z 57 to 150 Hz with 1G (9.8 m/s2) acceleration for 60 min. in each of directions; ST141 & ST151: 10 to 57 Hz with 0.075 mm amplitude, 57 to 150 X, Y, Z directions Hz with 1G (9.8 m/s2) acceleration for 30 min. in each of X, Y, Z directions Shock resistance (operating) 147 m/s2 (15G); 3 times in each of X, Y, Z directions Dimensions 190 (W) x 110 (H) x 53.5 (D) mm 315 (W) x 250 (H) x 54 (D) mm 195 (W) x 142 (H) x 54 (D) mm (thickness inside panel: 49 mm) (w/ expansion unit: 74 D) (w/ expansion unit: 74 D) Weight 0.6 kg max. 2.5 kg max. 1 kg max. Enclosure ratings Front panel: equivalent to IP65F (NEMA4)* Monochrome STN LCD Display panel Monochrome or Color STN LCD ST211: EL (monochrome); ST141: with backlight Color STN LCD with backlight; ST151: Color TFT LCD with backlight Number of dots (resolution) 260 dots horizontally x 140 dots vertically 320 dots horizontally x 240 dots vertically 640 dots horizontally x 480 dots vertically Effective display area 117 (H) x 63 (V) mm 118.2 (H) x 89.4 (V) mm ST211 & ST151: 211 (H) (5.2 inches diagonal) x 158 (V) mm (10.4 inches diagonal) (5.7 inches diagonal) ST141: 229 (H) x 172 (V) mm (11.3 inches diagonal) View angle Left/right direction: 30; Up/down: 30 NT31: Up: 20, Down: 30, Left/right: 30; ST211: No restriction; ST141: NT31C: Up: 45, Down: 60, Left/right: 50 Up/down: 30, Left: 55, Right: 45; ST151: Up: 40, Down: 55, Left/right: 55 Display color ST121: 2 color black/white ST211: 2 color black/gold; ST121: 2 color black/white; ST141 & ST151: 8 color ST141: 8 color Life expectancy 50,000 hours minimum 50,000 hours minimum ST211: 30,000 hrs min.; ST141 & ST151: 50,000 hrs min. NT31 & NT631-ST141 only: Adj. in 100 levels by touch switch operation at panel Contrast adjustment Knob on back of unit Max. number of registered screens 3999 screens Backlight Life expectancy 50,000 hours min. 25,000 hours min. ST141: 25,000 hours min.; ST151: 30,000 hours min. NT31, NT631-ST141 & NT631-ST151: Can be replaced from the rear Replacement Non-replaceable NT31 & NT631-ST141 only: Adj. in 3 levels by operation at the touch panel Brightness adjustment - Automatic turn-off function Can be set to turn off in 1 to 255 minutes, or to remain on with screen saver Touch panel Type Resistive type Resistive type Number of switches 91 (13 horizontally x 7 vertically) 768 (32 horizontally x 24 vertically) 192 (16 horizontally x 12 vertically) Max. number registered on one screen 91 256 192 Life expectancy One million operations minimum One million operations minimum One million operations minimum Serial communication Serial port A Conforms to EIA RS-232C; D-SUB 9-pin connector (female); +5 V (250 mA max.) output at pin No. 6 Serial port B Conforms to EIA RS-232C; D-SUB 9-pin EIA RS-232C or RS-422A/485 (selectable, EIA RS-232C (serial port B terminal block connector (female); +5 V (250 mA max.) by memory switch setting); D-SUB 25-pin selectable by memory switch setting); output at pin No. 6 D-SUB 9-pin connector (female) connector (female) EIA RS-422A/485 (serial port B Serial port B terminal - - connector selectable by memory switch setting); Terminal block Battery backup Numeral/character string memory tables data in the NT unit; Alarm history data table in the NT unit; Recipe tables in the NT unit; Real time clock and calendar (NT31/31C/631/631C only) "ESC/P", "Color": Color printing conforming to ESC/P 24-J83C; "PC-PR201H", "Color": Color printing Screen print function - conforming to PC-PR201PL; "ESC/P", "Tone": Monochrome printing in 8 grayscale levels, conforming to ESC/P 24-J82; "PC-PR201H", "Tone": Monochrome printing in 8 grayscale levels, conforming to the current time in accordance PC-PR201PL; "PCL-5", "Tone": Monochrome printingDisplays in 8 grayscale levels, conforming to PCL 5; with the built-in clock; Displayed and set however, the NT31 & NT631 supports monochrome printing only Calendar & clock function - Displays the current time in accordance with the built-in clock; Displayed and set with "Calendar Check" in the MAINTENANCE MODE" menu 21 Visit our website for more information on these other Advanced Automation products from Omron OMRON ELECTRONICS LLC 1 Commerce Drive Schaumburg, IL 60173 USA 800.55.OMRON (66766) OMRON CANADA, INC. 885 Milner Avenue Scarborough, Ontario M1B 5V8 416.286.6465 OMRON ON-LINE Global - http://www.omron.com USA - http://www.omron.com/oei Canada - http://www.omron.com/oci Programmable Controllers - Control Problem? Omron leads the industry in controller technology. Producing advanced machines of all sizes from micro to large with varying power, I/O, communications, and processing speed options. Industrial Networking - Omron is a founding member of Open DeviceNet Vendor's Association (ODVA), offering the broadest selection of masters, slaves, specialty products and accessories for DeviceNet available from a single supplier. Servo Motors and Drives - Omron's W-Series servo motors and drives deliver precise control, maintaining the highest resolution control at very high speeds. Their wide power range (up to 5.5 kW) provides maximum flexibility with easy set up. P06FAX4 (c)2002 OMRON ELECTRONICS LLC Printed in the U.S.A. 2/02/10M, 3M Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: NT30-KBA01 NT30C-CFL01 NT30-KBA04