Identifying
Miscellaneous Labels
178
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Article No. Part No. Type
Width
in. (mm)
Height of Write-On
Area
in. (mm)
Height of Label
in. (mm)
Wire Size
Range (AWG)
Min. Wire
Size (in²)
Markers
per Roll
Pkg.
Qty.
590-01010 RO101 RO101 .75 ″(19.05) .875 ″(22.22) 6.0 ″(152.40) 4/0 on up .70 40 1 roll
590-01750 RO175 RO175 .75 ″(19.05) .75 ″(19.05) 3.0 ″(76.2) 4 to 4/0 .330 90 1 roll
590-05120 RO512 RO512 .75 ″(19.05) .50 ″(12.7) 1.875 ″(47.62) 8 to 4 AWG .263 150 1 roll
590-05140 RO514 RO514 .75 ″(19.05) .375 ″(9.52) 1.25 ″(31.75) 14 to 8 AWG .053 200 1 roll
590-10000 RO175WP RO175WP .75 ″(19.05) .75 ″(19.05) 3.0 ″(76.2) 4 to 4/0 .330 90 1 roll
Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes.
Rite-On®Markers
HellermannTyton’s Rite-On Markers are made from a flexible vinyl film and are used to mark wire and cable. The self-
laminating labels have a clear tail which seals the legend under clear vinyl, maintaining the quality of the labels. The Rite-
On markers are packaged in a reuseable dispenser made from high impact plastic which is resistant to oils and grease.
Product Features
- Easily and conveniently fits in a pants or shirt pocket.
- Once loaded, unit allows minimal label exposure to dust
and moisture.
- Can be used with standard ball point pens or
HellermannTyton nylon marking pens.
- Excess liner is easily cut-off by tearing it over the edge
guide at the front of the unit.
- The dispenser can be reloaded over and over again, making
it a cost-effective and efficient method of labeling.
A special label window holds
the label firm for easy
marking.
Can be held easily in the
palm of the hand to provide
a flat writing surface.
Label dispenses automatically
when the liner is pulled from
the front of the unit.
Self-Laminating Labels and Dispenser
Product Selection
Identifying
Miscellaneous Labels
179
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Article No. Part No. Type
Width Height of Write-On Area Height of Label
Markers
per Roll Pkg. Qty.in. (mm) in. (mm) in. (mm)
590-01011 101REF 101REF .75 ″(19.05) .875 ″(22.22) 6.0 ″(152.4) 40 1 roll
590-01751 175REF 175REF .75 ″(19.05) .75 ″(19.05) 3.0 ″(76.2) 40 1 roll
590-05121 512REF 512REF .75 ″(19.05) .50 ″(12.7) 1.875 ″(47.62) 40 1 roll
590-05141 514REF 514REF .75 ″(19.05) .375 ″(9.52) 1.25 ″(31.75) 40 1 roll
Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes.
Article No. Part No. Type Color Pkg. Qty.
500-50822 T82-R T82R-RD Red 2 pens
500-50820 T82-S T82S-BK Black 2 pens
Use Part No. for ordering and Type for specification purposes.
Article No. Part No. Type Description Pkg. Qty.
590-00000 RODISPLAY RODISPLAY
Each display contains:
- 12 dispensers (3 each of RO101, RO175, RO512 & RO514)
- 6 starter packs (each pack contains an RO175 dispenser, a roll of
labels, a pen and directions for use)
- 16 refill rolls (4 each of the refill labels for each dispenser,
101REF, 175REF, 512REF & 514REF)
- 1 wire stand display and header label.
1
Use Part No. for ordering and Type for specification purposes.
Rite-On®Markers continued
Refill Rolls
Nylon Marking Pens
When used with a non-smear FTP nylon marking pen, marking is fast and
economical.
Rite-On Marker Display
The Rite-On Marker point-of-purchase display helps ensure increased sales of this
economical and popular labeling method.
Product Selection
Product Selection
Product Selection
Identifying
Miscellaneous Labels
180
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Article No. Part No. Type Description Pkg. Qty.
598-00256 WMTD0-9 WMTD0-9 Single box of wire marker tape refill. Each box contains 76 markers of each legend 0-9 and is
use to refill the empty tape dispenser. 1 Dispenser
598-00257 WMTDM WMTDM Wire marker tape dispenser merchandiser. Each merchandiser contains 10 dispensers. Each
dispenser contains 76 markers of each legend 0-9. 1 Merchandiser
598-00258 WMTM WMTM
Wire marker tape refill merchandiser. Each merchandiser contains 10 boxes of 76 markers
each of legend 0-9 and 10 boxes of 760 markers of one legend 0 -9. Single legend boxes
have 10 rolls (76 markers each roll) of a single legend.
1 Merchandiser
598-00259 WMT0-9 WMT0-9 One wire marker tape dispenser with 10 rolls of 76 markers per roll, of each legend 0-9. 1 Refill
Use Part No. for ordering and Type for specification purposes.
Material Tyvek - a polyolefin material that resists
tearing and abrasion
Dimensions .25″″W x 1.25″″L
Markers per Roll 76 each legend
Adhesive Aggressive acrylic base
Wire Marker Tape
The wire marker tape dispenser provides a
convenient, economical system for wire
marking. HellermannTyton’s wire marker tape
features sharp, crisp legends which are coated
to resist smearing and abrasion. It is provided
on a carrier strip to prevent contamination of
the adhesive prior to installation, assuring
permanent, non-flagging marker ends.
Material Data
Product Selection
Identifying
Miscellaneous Labels
181
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Handi-Card
Number Article No. Part No. Type
Labels per
Sheet Pkg. Qty.
0 598-00007 TYHC0 TYHC0 36 25 cards
1598-00019 TYHC1 TYHC1 36 25 cards
2 598-00022 TYHC2 TYHC2 36 25 cards
3598-00023 TYHC3 TYHC3 36 25 cards
4 598-00024 TYHC4 TYHC4 36 25 cards
5598-00025 TYHC5 TYHC5 36 25 cards
6 598-00027 TYHC6 TYHC6 36 25 cards
7598-00028 TYHC7 TYHC7 36 25 cards
8 598-00029 TYHC8 TYHC8 36 25 cards
9598-00030 TYHC9 TYHC9 36 25 cards
Use Part No. for ordering and Type for specification purposes.
Other Available Handi-Cards Part No.
Labels
per
Sheet Pkg. Qty.
Solid Handi-Cards - Each
marker on the same card
contains the same legend.
To order, use TYHC prefix plus
the legend (number or letter).
TYHC0,1,2,thru 99 36 25 cards
TYHC100 25 25 cards
TYHCA,B,C, thru Z 36 25 cards
TYHCL1,L2,or L3 36 25 cards
TYHCT1, T2, or T3 36 25 cards
Sequence Handi-Cards -
Each marker on the card
contains a different number
or letter. It runs in sequence
beginning with the lowest
number or letter first, and
ending with the highest.
TYHC1-33 33 25 cards
TYHC34-66 33 25 cards
TYHC67-99 33 25 cards
TYHCA-Z 36 25 cards
Material Vinyl Cloth (TYHC)
Adhesion to Steel 40oz/in. of width
Operating Temperature -40 °F to +250 °F (-40 °C to +121 °C)
Handi-Cards
HellermannTyton Handi-Cards are easy release markers on a plastic
card. They feature a strong adhesive which assures a long lasting
bond on wire. Permanent, pre-printed legends are available in solid
or sequence order.
Sequence card
Material Data
HANDI-CARD LEGENDS
Handi-Card legends listed below are also available with
a lead time of 3-4 weeks. These legends require a
one box minimum.
Solid
TYHC* — 0 thru 999 — A thru Z
Legends listed below come one per box (ex: A1).
A1, A2, A3, A4, A5, A6
B1...B6
C1...C6
D1...D6
E1...E6
F1...F6
G1...G4
H1...H6
J1...J4
K1...K4
L1...L6
M1...M6
P1...P4
R1...R5
S1...S5
T1...T10
X1...X4
Y1... Y4
Z1...Z4
*Each legend to be ordered separately. Example: To order a box of A3, order TYHCA3.
Please contact HellermannTyton for more details.
Voltage
2 characters - 36 markers per card
3-4 characters - 25 markers per card
3V FM
6V FWD
12V GEN
24V GND
110V HOT
115V IGN
120V IN
125V LINE
220V PHASE
230V PHASE A
240V PHASE B
270V PHASE C
280V POS
440V PRI
460V SEC
480V SIC
AC SPARE
ALI 1PHASE
AM 2 PHASE
ANT 3 PHASE
ARM A+
BAT A-
BB B+
BELL B-
BUS C+
CAP C-
CC +
CM -
COM LOAD
CT LOW
CUR MED
CW NEG
DC OFF
DD ON
FF OUT
Colors: RD= Red, YL=Yellow, LB= Light Blue, DB= Dark Blue, LG= Light Green, DG= Dark
Green, BR= Brown, OR= Orange, PK= Pink, GY= Gray, BK= Black, WH= White
Machine
Legends listed below come one per box (Ex:1T1).
1T1, 1T2, 1T3
2T1...2T3
3T1...3T3
4T1...4T3
5T1...5T3
6T1...6T3
7T1...7T3
8T1...8T3
9T1...9T3
10T1...10T3
11T1...11T3
12T1...12T3
13T1...13T3
14T1...14T3
15T1...15T3
1L1...1L3
2L1...2L3
3L1...3L3
4L1...4L3
5L1...5L3
6L1...6L3
Sequence Repeated
1-3
1-5
1-6
1-9
0-9
0-10
1-12
1-16
17-32
1-18
19-36
A-E
F-J
K-O
P-T
U-Z
1T-3T3
4T1-6T3
7T1-9T3
1L1-3L3
A1-A4
F1-F4
H1-H9
Solid Handi-Cards
Each marker on the card contains the same legend.
Solid Handi-Cards — 0-9
Product Selection
Product Selection
Identifying
Miscellaneous Labels
182
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Article No. Part No. Type Description Pkg. Qty.
598-00260 TCWM1 TCWM1 45 markers each of legends 0-9 1 booklet
598-00261 TCWM2 TCWM2 10 markers each of A-Z, 1-15, +, -, / 1 booklet
598-00262 TCWM3 TCWM3 10 markers each 1-45 1 booklet
598-00263 TCWM4 TCWM4 150 markers each 1,2,3 1 booklet
598-00264 TCWM5 TCWM5 150 markers each A,B, and C. 1 booklet
598-00265 TCWM6 TCWM6 150 markers each T1, T2 and T3 1 booklet
598-00266 TCWM7 TCWM7 150 markers each L1, L2 and L3 1 booklet
598-00267 TCWM8 TCWM8 6 markers each 1-15, 4 markers each 16-90 and 2 markers each of A-Z, +, -, / 1 booklet
598-00268 TCWM9 TCWM9 45 markers each of 1,2,3,A,B,C, 30 markers each of L1, L2 and L3
and 30 markers each of T1, T2 and T3 1 booklet
598-00269 TCWM10 TCWM10 45 markers each of 10 NEMA colors. 1 booklet
598-00270 TCWM11 TCWM11 15 markers each of 1-30 1 booklet
598-00271 TCWM12 TCWM12 15 markers each of A-Z, 21 markers blank, 8 markers +, and 7 markers -. 1 booklet
598-00272 TCWM13 TCWM13 45 markers each of +, -, AC, DC, 33 markers each of POS, NEG and GND.
27 markers of NEUT and 21 markers of SPARE and BLANK. 1 booklet
598-00273 TCWM14 TCWM14 45 markers each of 0-9, 15 markers each of L1, L2, L3 and 15 markers each of T1, T2 and T3. 1 booklet
598-00274 TCWM15 TCWM15 10 markers each of 46-90. 1 booklet
598-00275 TCWM16 TCWM16 10 markers each of 1-33, A, B, C, +, -, T1, T2, T3, L1, L2 and L3. 1 booklet
Use Part No. for ordering and Type for specification purposes.
Material Vinyl Cloth (TYHC)
Adhesion to Steel 40oz/in. of width
Operating Temperature -40 °F to +250 °F
(-40 °C to +121 °C)
Handi-Paks
Convenient pocket sized booklets. Black non-smear
legends on a white background. Plastic coated cloth
material remains flexible. Strong adhesive assures firm
bond on wire.
Material Data
Product Selection
Identifying
Miscellaneous Labels
183
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Article No. Part No. Type Color
Width
in. (mm)
Height of
Write-On Area
in. (mm)
Height of Label
in. (mm)
Wire Size
Range (AWG)
Labels
per
booklet Pkg. Qty.
Width - 0.5″″
598-94920 598-94920 HSMB-C1-120 White .5 ″(12.7) .5 ″(12.7) 1.5 ″(38.1) 8-14 240 1 booklet
598-94220 598-94220 HSMB-C1-120 Red .5 ″(12.7) .5 ″(12.7) 1.5 ″(38.1) 8-14 240 1 booklet
598-94320 598-94320 HSMB-C1-120 Orange .5 ″(12.7) .5 ″(12.7) 1.5 ″(38.1) 8-14 240 1 booklet
598-94420 598-94420 HSMB-C1-120 Yellow .5 ″(12.7) .5 ″(12.7) 1.5 ″(38.1) 8-14 240 1 booklet
598-94520 598-94520 HSMB-C1-120 Green .5 ″(12.7) .5 ″(12.7) 1.5 ″(38.1) 8-14 240 1 booklet
598-94620 598-94620 HSMB-C1-120 Blue .5 ″(12.7) .5 ″(12.7) 1.5 ″(38.1) 8-14 240 1 booklet
Width - 0.75″″
598-95920 598-95920 HSMB-C2-120 White .75 ″(19.1) .5 ″(12.7) 2.0 ″(50.8) 2-10 120 1 booklet
598-95220 598-95220 HSMB-C2-120 Red .75 ″(19.1) .5 ″(12.7) 2.0 ″(50.8) 2-10 120 1 booklet
598-95320 598-95320 HSMB-C2-120 Orange .75 ″(19.1) .5 ″(12.7) 2.0 ″(50.8) 2-10 120 1 booklet
598-95420 598-95420 HSMB-C2-120 Yellow .75 ″(19.1) .5 ″(12.7) 2.0 ″(50.8) 2-10 120 1 booklet
598-95520 598-95520 HSMB-C2-120 Green .75 ″(19.1) .5 ″(12.7) 2.0 ″(50.8) 2-10 120 1 booklet
598-95620 598-95620 HSMB-C2-120 Blue .75 ″(19.1) .5 ″(12.7) 2.0 ″(50.8) 2-10 120 1 booklet
Width - 1.0″″
598-96920 598-96920 HSMB-C3-120 White 1.0 ″(25.4) .75 ″(19.1) 3.0 ″(76.2) 6-0000 60 1 booklet
598-96220 598-96220 HSMB-C3-120 Red 1.0 ″(25.4) .75 ″(19.1) 3.0 ″(76.2) 6-0000 60 1 booklet
598-96320 598-96320 HSMB-C3-120 Orange 1.0 ″(25.4) .75 ″(19.1) 3.0 ″(76.2) 6-0000 60 1 booklet
598-96420 598-96420 HSMB-C3-120 Yellow 1.0 ″(25.4) .75 ″(19.1) 3.0 ″(76.2) 6-0000 60 1 booklet
598-96520 598-96520 HSMB-C3-120 Green 1.0 ″(25.4) .75 ″(19.1) 3.0 ″(76.2) 6-0000 60 1 booklet
598-96620 598-96620 HSMB-C3-120 Blue 1.0 ″(25.4) .75 ″(19.1) 3.0 ″(76.2) 6-0000 60 1 booklet
Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes.
HELASIGN®Self Laminating Booklet
HELASIGN self-laminating label booklets come in 6
different colors and are very easy to use. The booklet
conveniently fits in a pocket, while protecting the
labels from dust prior to use. The self-laminating
label’s clear “tail” wraps around the text for excellent
abrasion and moisture resistance and protection from
dust and dirt. Available in three sizes, the HELASIGN
accommodates cable diameters from .16” - .67”.
Product Selection
Identifying
Miscellaneous Labels
184
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Label Material W1 W2 W3
Material Polyamide 6 Polyamide 6 Polyamide 6
Color Yellow/ Black Print Yellow/ Black Print Yellow/ Black Print
Temperature Range -40°F to +185°F, intermittent 221°F
(-40°C to +85°C, intermittent 105°C)
-40°F to +185°F, intermittent 221°F
(-40°C to +85°C, intermittent 105°C)
-40°F to +185°F, intermittent 221°F
(-40°C to +85°C, intermittent 105°C)
Flammability Self-extinguishing UL94VO - base material Self-extinguishing UL94VO - base
material
Self-extinguishing UL94VO - base
material
Approvals ICE 304, EN 60062, UL94 ICE 304, EN 60062, UL94 ICE 304, EN 60062, UL94
Cable Range - in.
(mm) 2.0″- 2.8″(50.8 - 71.12) 2.8″to 3.8″(71.12 - 96.52) 4.3″to 5.3″(109.22 - 134.62)
Nominal Wire Cross
Section - in. (mm) 0.5″to 1.5″(12.7 - 38.1) 1.5″to 2.5″(38.1 - 63.5) 4″to 6″(101.6 - 152.4)
AWG 20 to 18 16 to 14 10 to 8
Width (W) - in. (mm) .19″(5) .22″(5.6) .31″(8.0)
Height (H) - in. (mm) .25″(6.4) .28″(7.1) .38″(9.6)
Length (L) - in. (mm) .12″(3.0) .12″(3.0) .12″(3.0)
Markers per Strip 20 20 10
Package Quantity 200 200 100
WIC®Markers
WIC®markers permanently and rapidly mark wires. Now, it’s simple to change identification on wires which are already
marked. This range of clip-on markers is specially designed for use after wire termination has been completed. The unique
gripping profile is designed to ensure that clip remains in place under normal and
vibration working conditions.
The deeply stamped mark, black print on yellow provide high legibility. The interlocking
device ensures perfect alignment of multi-mark legends. A high grade of material
guarantees good mechanical properties and chemical resistance against cleaning
agents, oils and fuels. Only 3 sizes of markers are needed for identifying wire cross-
sections ranging from an outside cable diameter of .75″- .208″(2.0 to 5.3mm).
WIC is an ″open marker″, open markers can be applied to pre-terminated wire and
cable. Use the re-fillable applicator to easily apply and position the markers during
installation.
Packaging
The pocket size dispensers of 200
markers (W1 and W2) and 100
markers (W3) adapted for use on
site and easy stored. Customized
compositions or special characters
on request.
Product Data
WIC Markers
Refillable Applicator
Wire Grips
Color Coded Applicators
Yes
•
•
No
•Expandandable
I.D. for a range of
wire sizes Open
Wire grips
to secure
the markers
to the wire
WIC is an ″″open
marker″″. Open markers
can be applied to pre-
terminated wire and
cable. Use the
re-fillable applicator to
easily apply and
position the markers
during installation.
The convenient WIC dispenser ideal for
pocket or toolbox storage.
Identifying
Miscellaneous Labels
185
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Wire Size Legend Article No. Part No. Type Pkg. Qty.
20-18 Gauge Wire -
Wire O.D. in. (mm)
.075″- 0.110″(2-2.8)
561-01604 561-01604 WIC1-0 200
561-01614 561-01614 WIC1-1 200
561-01624 561-01624 WIC1-2 200
561-01634 561-01634 WIC1-3 200
561-01644 561-01644 WIC1-4 200
561-01654 561-01654 WIC1-5 200
561-01664 561-01664 WIC1-6 200
561-01674 561-01674 WIC1-7 200
561-01684 561-01684 WIC1-8 200
561-01694 561-01694 WIC1-9 200
16 -14 Gauge Wire -
Wire O.D. in. (mm)
.110″- 0.149″(2.8-3.8)
561-02604 561-02604 WIC2-0 200
561-02614 561-02614 WIC2-1 200
561-02624 561-02624 WIC2-2 200
561-02634 561-02634 WIC2-3 200
561-02644 561-02644 WIC2-4 200
561-02654 561-02654 WIC2-5 200
561-02664 561-02664 WIC2-6 200
561-02674 561-02674 WIC2-7 200
561-02684 561-02684 WIC2-8 200
561-02694 561-02694 WIC2-9 200
10-8 Gauge Wire -
Wire O.D. in. (mm)
.169″- 0.208″(4.3-5.3)
561-03604 561-03604 WIC3-0 100
561-03614 561-03614 WIC3-1 100
561-03624 561-03624 WIC3-2 100
561-03634 561-03634 WIC3-3 100
561-03644 561-03644 WIC3-4 100
561-03654 561-03654 WIC3-5 100
561-03664 561-03664 WIC3-6 100
561-03674 561-03674 WIC3-7 100
561-03684 561-03684 WIC3-8 100
561-03694 561-03694 WIC3-9 100
Use Part No. for ordering and Type for specification purposes.
Article No. Part No. Type Pkg. Qty.
561-00001 561-00001 WIC TOOL 5
WICTOOL Applicator
WICTOOL easily applies WIC markers to wire. The unique
design of curved head and push out system makes this
applicator very easy to use and perfectly adapted to WIC
markers. WICTOOL must be ordered separate from WIC
markers.
Product Selection
WIC®Markers continued
Product Selection
WIC Markers are also
available in A-Z upon
request, please contact
HellermannTyton for
details.
Identifying
Miscellaneous Labels
186
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Wire Size Legend Article No. Part No. Type
Min. Outside Ø
in. (mm)
Max. Outside Ø
in. (mm)
Length (L)
in. (mm) Pkg. Qty.
22 Gauge Wire
Brown Applicator
0560-10526 WC1-0 WC1 .039″(1.0) .055″(1.4) .087″(2.21) 300
1560-10527 WC1-1 WC1 .039″(1.0) .055″(1.4) .087″(2.21) 300
2560-10528 WC1-2 WC1 .039″(1.0) .055″(1.4) .087″(2.21) 300
3560-10529 WC1-3 WC1 .039″(1.0) .055″(1.4) .087″(2.21) 300
4560-10530 WC1-4 WC1 .039″(1.0) .055″(1.4) .087″(2.21) 300
5560-10531 WC1-5 WC1 .039″(1.0) .055″(1.4) .087″(2.21) 300
6560-10532 WC1-6 WC1 .039″(1.0) .055″(1.4) .087″(2.21) 300
7560-10533 WC1-7 WC1 .039″(1.0) .055″(1.4) .087″(2.21) 300
8560-10534 WC1-8 WC1 .039″(1.0) .055″(1.4) .087″(2.21) 300
9560-10535 WC1-9 WC1 .039″(1.0) .055″(1.4) .087″(2.21) 300
18 Gauge Wire
Gray Applicator
0560-10126 WC2-0 WC2 .055″(1.4) .071″(1.8) .091″(2.33) 300
1560-10127 WC2-1 WC2 .055″(1.4) .071″(1.8) .091″(2.33) 300
2560-10128 WC2-2 WC2 .055″(1.4) .071″(1.8) .091″(2.33) 300
3560-10129 WC2-3 WC2 .055″(1.4) .071″(1.8) .091″(2.33) 300
4560-10130 WC2-4 WC2 .055″(1.4) .071″(1.8) .091″(2.33) 300
5560-10131 WC2-5 WC2 .055″(1.4) .071″(1.8) .091″(2.33) 300
6560-10132 WC2-6 WC2 .055″(1.4) .071″(1.8) .091″(2.33) 300
7560-10133 WC2-7 WC2 .055″(1.4) .071″(1.8) .091″(2.33) 300
8560-10134 WC2-8 WC2 .055″(1.4) .071″(1.8) .091″(2.33) 300
9560-10135 WC2-9 WC2 .055″(1.4) .071″(1.8) .091″(2.33) 300
Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes.
Clip-Tags
Clip-Tags are snap-on markers which slip easily on wire and
cable. The markers are non-adhesive and come on a wand
for trouble free installation. Clip-Tags are applied by placing
the flared end of the wand over the wire, then pushing the
marker over the flare to the wire. The interlocking design
of these markers keep them aligned and readable.
Clip-Tags are used on pre-terminated wires, pre-installed
wires, and terminal blocks. They work well for electrical
installations and in panel and wire harness shops. Each
legend is printed black on a white marker. Each wand
contains 30 markers and each package contains 10 wands.
Product Selection
WC1 A
Size Legend
Available standard legends include: 0-9, A to Z.
One legend per package. For example, WC1-A equals
300 Clip-Tag markers in legend “A.”
Part Number Example
Clip Tags
Refillable Applicator
Wire Grips
Color Coded Applicators
Low Profile
Yes
•
•
No
•
•Open
Expandable
within wire
range.
Clip-Tags are ″″open
markers″″. Open markers
can be applied to pre-
terminated wire and
cable. Clip-Tags have the
lowest profile when
applied to a wire.
Identifying
Miscellaneous Labels
187
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Wire Size Legend Article No. Part No. Type
Min. Outside Ø
in. (mm)
Max. Outside Ø
in. (mm)
Length (L)
in. (mm) Pkg. Qty.
18-16 Gauge Wire
Green Applicator
0560-10226 WC3-0 WC3 .075″(1.9) .104″(2.65) .125″(3.19) 300
1560-10227 WC3-1 WC3 .075″(1.9) .104″(2.65) .125″(3.19) 300
2560-10228 WC3-2 WC3 .075″(1.9) .104″(2.65) .125″(3.19) 300
3560-10229 WC3-3 WC3 .075″(1.9) .104″(2.65) .125″(3.19) 300
4560-10230 WC3-4 WC3 .075″(1.9) .104″(2.65) .125″(3.19) 300
5560-10231 WC3-5 WC3 .075″(1.9) .104″(2.65) .125″(3.19) 300
6560-10232 WC3-6 WC3 .075″(1.9) .104″(2.65) .125″(3.19) 300
7560-10233 WC3-7 WC3 .075″(1.9) .104″(2.65) .125″(3.19) 300
8560-10234 WC3-8 WC3 .075″(1.9) .104″(2.65) .125″(3.19) 300
9560-10235 WC3-9 WC3 .075″(1.9) .104″(2.65) .125″(3.19) 300
16 Gauge Wire
Red Applicator
0560-10326 WC6-0 WC6 .102″(2.6) .138″(3.5) .127″(3.25) 300
1560-10327 WC6-1 WC6 .102″(2.6) .138″(3.5) .127″(3.25) 300
2560-10328 WC6-2 WC6 .102″(2.6) .138″(3.5) .127″(3.25) 300
3560-10329 WC6-3 WC6 .102″(2.6) .138″(3.5) .127″(3.25) 300
4560-10330 WC6-4 WC6 .102″(2.6) .138″(3.5) .127″(3.25) 300
5560-10331 WC6-5 WC6 .102″(2.6) .138″(3.5) .127″(3.25) 300
6560-10332 WC6-6 WC6 .102″(2.6) .138″(3.5) .127″(3.25) 300
7560-10333 WC6-7 WC6 .102″(2.6) .138″(3.5) .127″(3.25) 300
8560-10334 WC6-8 WC6 .102″(2.6) .138″(3.5) .127″(3.25) 300
9560-10335 WC6-9 WC6 .102″(2.6) .138″(3.5) .127″(3.25) 300
16-10 Gauge Wire
Blue Applicator
0560-10426 WC9-0 WC9 .128″(3.25) .177″(4.5) .131″(3.35) 300
1560-10427 WC9-1 WC9 .128″(3.25) .177″(4.5) .131″(3.35) 300
2560-10428 WC9-2 WC9 .128″(3.25) .177″(4.5) .131″(3.35) 300
3560-10429 WC9-3 WC9 .128″(3.25) .177″(4.5) .131″(3.35) 300
4560-10430 WC9-4 WC9 .128″(3.25) .177″(4.5) .131″(3.35) 300
5560-10431 WC9-5 WC9 .128″(3.25) .177″(4.5) .131″(3.35) 300
6560-10432 WC9-6 WC9 .128″(3.25) .177″(4.5) .131″(3.35) 300
7560-10433 Wc9-7 WC9 .128″(3.25) .177″(4.5) .131″(3.35) 300
8560-10434 WC9-8 WC9 .128″(3.25) .177″(4.5) .131″(3.35) 300
9560-10435 WC9-9 WC9 .128″(3.25) .177″(4.5) .131″(3.35) 300
10 Gauge Wire
Yellow Applicator
0560-10026 WC12-0 WC12 .177″(4.4) .236″(6.0) .139″(3.54) 300
1560-10027 WC12-1 WC12 .177″(4.4) .236″(6.0) .139″(3.54) 300
2560-10028 WC12-2 WC12 .177″(4.4) .236″(6.0) .139″(3.54) 300
3560-10029 WC12-3 WC12 .177″(4.4) .236″(6.0) .139″(3.54) 300
4560-10030 WC12-4 WC12 .177″(4.4) .236″(6.0) .139″(3.54) 300
5560-10031 WC12-5 WC12 .177″(4.4) .236″(6.0) .139″(3.54) 300
6560-10032 WC12-6 WC12 .177″(4.4) .236″(6.0) .139″(3.54) 300
7560-10033 WC12-7 WC12 .177″(4.4) .236″(6.0) .139″(3.54) 300
8560-10034 WC12-8 WC12 .177″(4.4) .236″(6.0) .139″(3.54) 300
9560-10035 WC12-9 WC12 .177″(4.4) .236″(6.0) .139″(3.54) 300
Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes.
Clip-Tags continued
Product Selection
Identifying
Miscellaneous Labels
190
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Material PVC Polyvinylchloride
Temperature Range -85°F to +221° (-65°C to 105°C)
Chemical Resistance Good resistance to acid, aromatic
fuel, vegetable oils, alkalis
Approval UL224, IEC 684-3-116, BS6746C
Type
Min. Outside Ø
in. (mm)
Max. Outside Ø
in. (mm)
Length (L)
in. (mm) Tool Roll Size Standard Markings
MHG00 .047″(1.2) .078″(2.0) .137″(3.5) TJC00 1000
A, B, C, ...Z;
0, 1, 2, 3...9;
+, -, /, earth symbol
MHG1-3 .03″(1.0) .118″(3.0) .137″(3.5) TJC1-3 1000
MHG2-5 .078″(2.0) .196″(5.0) .137″(3.5) TJC2-5 1000
MHG3-7 .118″(3.0) .275″(7.0) .137″(3.5) TJC3-7 500
MHG4-9 .157″(4.0) .354″(9.0) .196″(5.0) TJC4-9 250
Marker length tolerance for 00 to 3-7 is +0.00 mm to -0.10 mm. Dimensions are approximate and subject to technical changes.
Helagrip 2000 Cable Markers
HellermannTyton Helagrip 2000 cable markers are designed for wire and cable marking in tough environments. Made of PVC
(Polyvinylchloride), Helagrip features include easy application, chevron shape to ensure a positive lock onto the next marker,
plastic reels color coded for size, and exceptional legibility. Helagrips also take up less space on the cable than other markers.
The profile of the marker is designed to hug the wire and fit to various sizes of cable. Handy applicator tools are available for
easy placement of markers on the wire. Chevron cut ensures positive locking of each marker to another marker.
MHG1-3 WE 2
Type Color
(white)
Legend
Part Number Example - MHG1-3WE 2
Helagrips are available in white. For colors, contact HellermannTyton.
M = Marked Sleeve HG = Helagrip 1-3 = Size in mm WE = White 2= Legend
To order - select type, then add WE (for white) and select legend from standard
markings.
Product Data
Helagrip Size
Width ( W) - in. (mm) Height (H) - in. (mm) Height (H2)
in. (mm)
Height (H3)
in. (mm)
Height (H4)
in. (mm)Nominal Min. Max. Nominal Min. Max.
MHG00 0.137 (3.5) 0.098 (2.5) 0.177 (4.5) 0.114 (2.9) 0.11 (2.8) 0.118 (3.0) 0.027 (0.7) 0.031 (0.8) 0.019 (.0.5)
MHG1-3 0.127 (3.25) 0.125(3.15) 0.131 (3.35) 0.137 (3.5) 0.134 (3.4) 0.141 (3.6) 0.019 (0.5) 0.035 (0.9) 0.015 (0.4)
MHG2-5 0.165 (4.2) 0.161 (4.1) 0.169 (4.3) 0.188 (4.8) 0.185 (4.7) 0.192 (4.9) 0.031 (0.8) 0.07 (1.8) 0.015 (0.4)
MHG3-7 0.228 (5.8) 0.224 (5.7) 0.232 (5.9) 0.255 (6.5) 0.250 (6.4) 0.259 (6.6) 0.033 (0.85) 0.11 (2.8) 0.023 (0.6)
MHG4-9 0.267 (6.8) 0.259 (6.6) 0.275 (7.0) 0.346 (8.8) 0.338 (8.6) 0.354 (9.0) 0.039 (1.0) 0.149 (3.8) 0.023 (0.6)
Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes.
Material Data
Product Data
Helagrip is a ″″closed
marker″″with the
greatest wire range
flexibility. Closed
markers are applied to
wire and cable prior to
termination for the best
mark performance and
security.
Helagrip rolls are offered in white. They are also available in
yellow depending upon volume requirements.
Identifying
Miscellaneous Labels
191
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Helagrip 2000 Cable Markers continued
Handy applicator tools are available for easy placement of
markers on the wire.
The profile of the marker is designed to hug the wire and fit to
various sizes of cable.
Article No. Part No. Type Description
Min. Outside Ø
in. (mm)
Max. Outside Ø
in. (mm) Pkg. Qty.
518-05013 MHG1-3CASS Helagrip Set 1-3 Helagrip 2000 Cassette .03″(1.3) .118″(2.8) 1
518-05025 MHG2-5CASS Helagrip Set 2-5 Helagrip 2000 Cassette .078″(2.0) .196″(5.0) 1
Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes.
Product Selection
HELAGRIP 2000 Cassettes
Each cassette is complete with a teflon applicator and 25
of each of the following markers:
- 0-9 (inc.) color coded.
- A, E, L, N, R, S, T, +, -, Earth black on white
- The MHG1-3CASS cassette has an additional strip of
each of the numbers 0, 1, 2, 3.
- Size MHG1-3CASS cable diameter range .04” to .12”
(1 to 3 mm).
- Size MHG2-5CASS cable diameter range .08” to .2” (2
to 5 mm).
Color code is special order. Non-stock item.
Identifying
Miscellaneous Labels
192
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Wire Size Legend Article No. Part No. Type
Min. Outside Ø
in. (mm)
Max. Outside Ø
in. (mm)
Length (L)
in. (mm) Pkg. Qty.
18-14 Gauge Wire
0515-00279 MHG00WE0 HGDC00 .047″(1.2) .078″(2.0) .137″(3.5) 1000
1515-00289 MHG00WE1 HGDC00 .047″(1.2) .078″(2.0) .137″(3.5) 1000
2515-00299 MHG00WE2 HGDC00 .047″(1.2) .078″(2.0) .137″(3.5) 1000
3515-00309 MHG00WE3 HGDC00 .047″(1.2) .078″(2.0) .137″(3.5) 1000
4515-00319 MHG00WE4 HGDC00 .047″(1.2) .078″(2.0) .137″(3.5) 1000
5515-00329 MHG00WE5 HGDC00 .047″(1.2) .078″(2.0) .137″(3.5) 1000
6515-00339 MHG00WE6 HGDC00 .047″(1.2) .078″(2.0) .137″(3.5) 1000
7515-00349 MHG00WE7 HGDC00 .047″(1.2) .078″(2.0) .137″(3.5) 1000
8515-00359 MHG00WE8 HGDC00 .047″(1.2) .078″(2.0) .137″(3.5) 1000
9515-00369 MHG00WE9 HGDC00 .047″(1.2) .078″(2.0) .137″(3.5) 1000
17-12 Gauge Wire
0515-01279 MHG1-3WE0 HGDC1-3 .03″(1.0) .118″(3.0) .137″(3.5) 1000
1515-01289 MHG1-3WE1 HGDC1-3 .03″(1.0) .118″(3.0) .137″(3.5) 1000
2515-01299 MHG1-3WE2 HGDC1-3 .03″(1.0) .118″(3.0) .137″(3.5) 1000
3515-01309 MHG1-3WE3 HGDC1-3 .03″(1.0) .118″(3.0) .137″(3.5) 1000
4515-01319 MHG1-3WE4 HGDC1-3 .03″(1.0) .118″(3.0) .137″(3.5) 1000
5515-01329 MHG1-3WE5 HGDC1-3 .03″(1.0) .118″(3.0) .137″(3.5) 1000
6515-01339 MHG1-3WE6 HGDC1-3 .03″(1.0) .118″(3.0) .137″(3.5) 1000
7515-01349 MHG1-3WE7 HGDC1-3 .03″(1.0) .118″(3.0) .137″(3.5) 1000
8515-01359 MHG1-3WE8 HGDC1-3 .03″(1.0) .118″(3.0) .137″(3.5) 1000
9515-01369 MHG1-3WE9 HGDC1-3 .03″(1.0) .118″(3.0) .137″(3.5) 1000
14-16 Gauge Wire
0515-02279 MHG2-5WE0 HGDC2-5 .078″(2.0) .196″(5.0) .137″(3.5) 1000
1515-02289 MHG2-5WE1 HGDC2-5 .078″(2.0) .196″(5.0) .137″(3.5) 1000
2515-02299 MHG2-5WE2 HGDC2-5 .078″(2.0) .196″(5.0) .137″(3.5) 1000
3515-02309 MHG2-5WE3 HGDC2-5 .078″(2.0) .196″(5.0) .137″(3.5) 1000
4515-02319 MHG2-5WE4 HGDC2-5 .078″(2.0) .196″(5.0) .137″(3.5) 1000
5515-02329 MHG2-5WE5 HGDC2-5 .078″(2.0) .196″(5.0) .137″(3.5) 1000
6515-02339 MHG2-5WE6 HGDC2-5 .078″(2.0) .196″(5.0) .137″(3.5) 1000
7515-02349 MHG2-5WE7 HGDC2-5 .078″(2.0) .196″(5.0) .137″(3.5) 1000
8515-02359 MHG2-5WE8 HGDC2-5 .078″(2.0) .196″(5.0) .137″(3.5) 1000
9515-02699 MHG2-5WE9 HGDC2-5 .078″(2.0) .196″(5.0) .137″(3.5) 1000
12-2 Gauge Wire
0515-02501 MHG3-7WE0 HGDC3-7 .118″(3.0) .275″(7.0) .137″(3.5) 500
1515-02502 MHG3-7WE1 HGDC3-7 .118″(3.0) .275″(7.0) .137″(3.5) 500
2515-02503 MHG3-7WE2 HGDC3-7 .118″(3.0) .275″(7.0) .137″(3.5) 500
3515-02504 MHG3-7WE3 HGDC3-7 .118″(3.0) .275″(7.0) .137″(3.5) 500
4515-02505 MHG3-7WE4 HGDC3-7 .118″(3.0) .275″(7.0) .137″(3.5) 500
5515-02506 MHG3-7WE5 HGDC3-7 .118″(3.0) .275″(7.0) .137″(3.5) 500
6515-02507 MHG3-7WE6 HGDC3-7 .118″(3.0) .275″(7.0) .137″(3.5) 500
7515-02508 MHG3-7WE7 HGDC3-7 .118″(3.0) .275″(7.0) .137″(3.5) 500
8515-02509 MHG3-7WE8 HGDC3-7 .118″(3.0) .275″(7.0) .137″(3.5) 500
9515-02510 MHG3-7WE9 HGDC3-7 .118″(3.0) .275″(7.0) .137″(3.5) 500
10-2/0 Gauge Wire
0515-03821 MHG4-9WE0 HGDC4-9 .157″(4.0) .354″(9.0) .196″(5.0) 250
1515-03822 MHG4-9WE1 HGDC4-9 .157″(4.0) .354″(9.0) .196″(5.0) 250
2515-03823 MHG4-9WE2 HGDC4-9 .157″(4.0) .354″(9.0) .196″(5.0) 250
3515-03824 MHG4-9WE3 HGDC4-9 .157″(4.0) .354″(9.0) .196″(5.0) 250
4515-03825 MHG4-9WE4 HGDC4-9 .157″(4.0) .354″(9.0) .196″(5.0) 250
5515-03826 MHG4-9WE5 HGDC4-9 .157″(4.0) .354″(9.0) .196″(5.0) 250
6515-03827 MHG4-9WE6 HGDC4-9 .157″(4.0) .354″(9.0) .196″(5.0) 250
7515-03828 MHG4-9WE7 HGDC4-9 .157″(4.0) .354″(9.0) .196″(5.0) 250
8515-03829 MHG4-9WE8 HGDC4-9 .157″(4.0) .354″(9.0) .196″(5.0) 250
9515-03830 MHG4-9WE9 HGDC4-9 .157″(4.0) .354″(9.0) .196″(5.0) 250
Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes.
Product Selection
Helagrip 2000 Cable Marker Rolls
Black on White, 0-9 Helagrips
Identifying
Miscellaneous Labels
193
w w w . h e l l e r m a n n . t y t o n . c o m
|1 - 8 0 0 - 5 3 7 - 1 5 1 2
Article No. Part No. Type
Width (W)
in. (mm)
Width 2 (W2)
in. (mm)
Length (L)
in. (mm) Pkg. Qty.
T18 Series thru T50 Series Ties
151-42159 IMP1.510C2 IMP1.5 .75 ″(19.1) 1.03 ″(26.2) 1.5 ″(38.1) 100
151-00238 IMP1.510M4 IMP1.5 .75 ″(19.1) 1.03 ″(26.2) 1.5 ″(38.1) 1000
151-00236 IMP1.7510C2 IMP1.75 1.75 ″(44.5) 1.28 ″(26.2) .75 ″(19.1) 100
151-00237 IMP1.7510M4 IMP1.75 1.75 ″(44.5) 1.28 ″(26.2) .75 ″(19.1) 1000
151-42229 IMP210C2 IMP210 .75 ″(19.1) 1.53 ″(38.90) 2.0 ″(50.8) 100
151-00239 IMP210M4 IMP210 .75 ″(19.1) 1.53 ″(38.90) 2.0 ″(50.8) 1000
151-42259 IMP2.510C2 IMP2.5 1.75 ″(44.75) 2.03 ″(51.6) 2.50 ″(63.5) 100
151-00240 IMP2.510M4 IMP2.5 1.75 ″(44.75) 2.03 ″(51.6) 2.50 ″(63.5) 1000
151-42359 IMP3.510C2 IMP3.5 .75 ″(19.1) 3.03 ″(77.0) 3.50 ″(88.9) 100
151-00241 IMP3.510M4 IMP3.5 .75 ″(19.1) 3.03 ″(77.0) 3.50 ″(88.90) 1000
151-42269 IMP2.5W1.7510C2 IMP2.5 1.75 ″(44.75) 2.03 ″(51.6) 2.50 ″(63.5) 100
151-00242 IMP2.5W1.7510H4 IMP2.5 1.75 ″(44.75) 2.03 ″(51.6) 2.50 ″(63.5) 500
Dimensions are approximate and subject to technical changes. Use Part No. for ordering and Type for specification purposes.
Identification Marker Plates
Identification marker plates can be mounted in any direction, either vertically or horizontally as flags, tags, or wraparound
identification plates. They can be marked with HellermannTyton marking pen (Part Number FTP) or hot stamped. These marker
plates are manufactured from nylon and are white.
Product Selection
