19-4601; Rev 0; 4/09 Precision, Micropower, 3V Series Voltage Reference in SOT23 The MAX6010 is a precision, low-noise, low-dropout, micropower voltage reference in a SOT23 package. This three-terminal voltage reference operates with an input voltage from 3.2V to 5.5V, and outputs 3V. The MAX6010 voltage reference consumes less than 5A (max) of supply current and can source up to 7mA and sink up to 1mA of load current when the input is 5V. Unlike conventional shunt-mode (two-terminal) references that waste supply current and require an external resistor, the MAX6010 offers a supply current that is virtually independent of supply voltage (with only 0.05A/V variation with supply voltage) and does not require an external resistor. The MAX6010 has initial accuracies of 0.2% (A grade) and 0.4% (B grade) and a temperature drift of 50ppm/C (max). The low-dropout voltage and the ultra-low supply current over the full voltage range make this device ideal for portable and battery-operated applications. The MAX6010 is available in a small, 3-pin SOT23 package. Applications Features o Ultra-Low Supply Current: 5A (max) o 3V Output from 3.2V Input o Small, 3-Pin SOT23 Package o Initial Accuracy: 0.2% (max) o Low Temperature Drift: 50ppm/C (max) o 200mV Dropout Voltage o Load Regulation (7mA Source): 200V/mA (max) o Line Regulation 3.2V to 5.5V: 350V/V (max) Ordering Information PART TEMP RANGE PINPACKAGE MAX6010AEUR+T -40C to +85C 3 SOT23 TOP MARK FZUS MAX6010BEUR+T -40C to +85C 3 SOT23 +Denotes a lead(Pb)-free/RoHS-compliant package. T = Tape and reel. FZUU Selector Guide Battery-Operated Equipment Portable Equipment Lens Image Stabilization PART OUTPUT VOLTAGE (V) INITIAL ACCURACY (%) TEMP COEFFICIENT (ppm/C) MAX6010AEUR 3 0.2 50 3 0.4 50 Data-Acquisition Systems Industrial and Process-Control Systems MAX6010BEUR Pin Configuration Typical Application Circuit VCC IN OUT 0.1F REFERENCE OUT TOP VIEW IN 1 * MAX6010 MAX6010 3 GND 0.001F TO 1F OUT 2 SOT23 GND *OPTIONAL ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX6010 General Description MAX6010 Precision, Micropower, 3V Series Voltage Reference in SOT23 ABSOLUTE MAXIMUM RATINGS Operating Temperature Range ...........................-40C to +85C Junction Temperature ......................................................+150C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C (Voltages Referenced to GND) VIN, VOUT ..................................................................-0.3V to +6V Output Short-Circuit Duration to GND or VIN ............Continuous Continuous Power Dissipation (TA = +70C) 3-Pin SOT23 (derate 4.0mW/C above +70C).............320mW Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (VIN = 5V; COUT = 47nF, CIN = 0.1F, IOUT = 0; TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX MAX6010A (0.2%), TA = +25C 2.994 3.000 3.006 MAX6010B (0.4%), TA = +25C 2.988 3.000 3.012 UNITS OUTPUT Output Voltage VOUT V Output-Voltage Temperature Drift TCVOUT (Note 2) 16 50 ppm/oC Line Regulation VOUT/ VIN 3.2V VIN 5.5V 50 350 V/V Load Regulation VOUT/ IOUT 0 IOUT 7mA 60 200 V/mA -1mA IOUT 0 0.25 10 V/A Short-Circuit Current Dropout Voltage ISC VIN VOUT Thermal Hysteresis Sourcing to GND 20 Sinking from VIN 15 IOUT = 1mA (Note 3) 55 (Note 4) 210 mA 200 mV ppm DYNAMIC CHARACTERISTICS Noise Voltage eOUT Ripple Rejection PSRR Turn-On Settling Time Capacitive-Load Stability Range tR COUT 0.1Hz to 10Hz 100 VP-P 10Hz to 10kHz 200 VRMS 50 dB VIN = 5V 100mV (f 2kHz), IOUT = 1mA Settling to 0.1%, COUT = 0.1F (Note 2) 700 1 s 1000 nF 5.5 V INPUT Supply Voltage Range Quiescent Supply Current Change in Quiescent Supply Current vs. Input Voltage VIN IIN IIN/VIN Guaranteed by line regulation test 3.2 TA = +25C 3.6 5 TA = TMIN to TMAX 3.6 6 3.2V VIN 5.5V 0.5 0.25 A A/V Note 1: Devices are 100% production tested at TA = +25C and are guaranteed by design from TA = TMIN to TMAX. Note 2: Not production tested. Guaranteed by design. Note 3: Dropout voltage is the minimum input voltage at which VOUT changes 0.2% from VOUT at rated VIN and is guaranteed by load regulation test. Note 4: Thermal hysteresis is defined as the change in TA = +25C output voltage before and after temperature cycling of the device (from TA = TMIN to TMAX). Initial measurement at TA = +25C is followed by temperature cycling the device to TA = +85C then to TA = -40C and another measurement at TA = +25C is compared to the original measurement at TA = +25C. 2 _______________________________________________________________________________________ Precision, Micropower, 3V Series Voltage Reference in SOT23 OUTPUT-VOLTAGE DRIFT vs. TEMPERATURE LINE REGULATION OUTPUT VOLTAGE (V) 3.001 3.000 2.999 2.998 2.997 MAX6010 toc02 3.002 0.25 OUTPUT VOLTAGE CHANGE (mV) MAX6010 toc01 3.003 TA = +85C 0.20 TA = +25C 0.15 TA = -40C 0.10 0.05 2.996 0 2.995 10 35 60 3.5 3.1 85 3.9 DROPOUT VOLTAGE vs. SOURCE CURRENT MAX6010 toc03 TA = +85C TA = +25C 0.4 TA = -40C 0.3 0.2 3 4 5 6 TA = +85C 0 -0.2 -0.4 -0.6 -1 7 0 1 2 3 4 5 SOURCE CURRENT (mA) LOAD CURRENT (mA) POWER-SUPPLY REJECTION RATIO vs. FREQUENCY SUPPLY CURRENT vs. INPUT VOLTAGE 3.68 3.66 SUPPLY CURRENT (A) 70 60 50 40 30 20 7 MAX6010 toc06 ILOAD = 0mA 6 3.70 MAX6010 toc05 80 3.64 3.62 3.60 3.58 3.56 3.54 ILOAD = 1mA 10 TA = +25C 0.2 -0.8 90 PSRR (dB) 0.4 -1.0 2 TA = -40C 0.6 0 1 5.5 0.8 0.1 0 5.1 1.0 OUTPUT-VOLTAGE CHANGE (mV) DROPOUT VOLTAGE (V) 0.7 0.5 4.7 LOAD REGULATION 0.8 0.6 4.3 INPUT VOLTAGE (V) TEMPERATURE (C) MAX6010 toc04 -15 -40 3.52 CIN = COUT = 47nF 0 3.50 10 100 1000 FREQUENCY (Hz) 10,000 100,000 3.1 3.5 3.9 4.3 4.7 5.1 5.5 INPUT VOLTAGE (V) _______________________________________________________________________________________ 3 MAX6010 Typical Operating Characteristics (VIN = 5V, CIN = 0.1F, COUT = 0.1F. TA = +25C, unless otherwise noted.) Typical Operating Characteristics (continued) (VIN = 5V, CIN = 0.1F, COUT = 0.1F. TA = +25C, unless otherwise noted.) OUTPUT IMPEDANCE vs. FREQUENCY SUPPLY CURRENT vs. TEMPERATURE 4.3 4.1 SUPPLY CURRENT (A) 100 10 1 0.10 MAX6010 toc08 4.5 MAX6010 toc07 1000 OUTPUT IMPEDANCE () MAX6010 Precision, Micropower, 3V Series Voltage Reference in SOT23 3.9 VIN = 5.5V 3.7 3.5 3.3 VIN = 3.2V 3.1 2.9 2.7 0.01 2.5 1 10 100 1000 10,000 FREQUENCY (Hz) -40 -15 10 35 60 85 TEMPERATURE (C) 10Hz TO 10kHz OUTPUT NOISE 0.1Hz TO 10Hz OUTPUT NOISE MAX6010 toc09 MAX6010 toc10 100V/div 100ms/div 1s/div TURN-ON TRANSIENT TURN-OFF TRANSIENT MAX6010 toc11 400s/div 4 50V/div MAX6010 toc12 VIN 2V/div VIN 2V/div 0V 0V VOUT 1V/div VOUT 1V/div 0V 0V 400s/div _______________________________________________________________________________________ Precision, Micropower, 3V Series Voltage Reference in SOT23 LINE-TRANSIENT RESPONSE LOAD-TRANSIENT RESPONSE MAX6010 toc14 MAX6010 toc13 -1mA VIN 2V/div 7mA VIN 200mV/div 4.8V VOUT 1V/div VOUT 10mV/div 400s/div 400s/div Detailed Description The MAX6010 is a precision, low-noise, low-dropout, micropower, bandgap voltage reference in a SOT23 package. This three-terminal reference operates with an input voltage from 3.2V to 5.5V, and outputs 3V. The device sources up to 7mA with < 200mV of dropout voltage and requires only 5A (max) supply current. Applications Information Output/Load Capacitance The MAX6010 requires a minimum of 1nF load to maintain output stability. The device remains stable for capacitive loads as high as 1F. In applications where the load or the supply can experience step changes, a larger output capacitor reduces the amount of overshoot (or undershoot) and assists the circuit's transient response. Pin Description PIN NAME 1 IN FUNCTION 2 OUT Reference Voltage Output. Bypass with at least 1nF to ground. (See the Output/Load Capacitance section.) 3 GND Ground Supply Voltage Input The input voltage source must be capable of providing this current to ensure reliable turn-on. Turn-On Time The MAX6010 typically turns on and settles to within 0.1% of the final value in 700s. The turn-on time can increase with the device operating at the minimum dropout voltage and the maximum load. Supply Current The 5A maximum supply current varies only 0.05A/V with the supply voltage. When the supply voltage is below the minimum-specified input voltage (as during turn-on), the device can draw up to 20A beyond the nominal supply current. _______________________________________________________________________________________ 5 MAX6010 Typical Operating Characteristics (continued) (VIN = 5V, CIN = 0.1F, COUT = 0.1F. TA = +25C, unless otherwise noted.) MAX6010 Precision, Micropower, 3V Series Voltage Reference in SOT23 Package Information Chip Information PROCESS: BiCMOS For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. PACKAGE TYPE PACKAGE CODE DOCUMENT NO. 3 SOT23 U3-1 21-0051 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 6 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 (c) 2009 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Maxim Integrated: MAX6010AEUR+T MAX6010BEUR+T