434 MHz SAW Filter 7 MHz Bandwidth Part Number: SF0434BA02617S DESCRIPTION * * * 433.92 MHz SAW Filter with nominal 7 MHz bandwidth. 3 x 3 mm LCC Package, 6 pads. RoHS compliant. TYPICAL PERFORMANCE Spectrum Microwave, Inc. 400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401 www.SpectrumMicrowave.com DSSF0434BA02517S Rev X2 4-Feb-11 Page 1 of 3 434 MHz SAW Filter 7 MHz Bandwidth Part Number: SF0434BA02617S SPECIFICATION Parameter Min Typ Max Center Frequency (Fc) Nominal Bandwidth (1 dB) Insertion Loss (433.00 - 434.71 MHz) - 433.92 7 2.0 2.7 MHz MHz dB Amplitude Ripple (433.00 - 434.71 MHz) - 0.3 1.3 dB p-p 42.0 40.0 40.0 42.0 54.0 50.0 51.0 52.0 - Attenuation (Reference level from 0 dB) (389.0 to 392.0 MHz) (411.0 to 414.0 MHz) (454.0 to 457.0 MHz) (475.5 to 478.5 MHz) Ambient Temperature System Source and Load Impedance 25 50 Units dB dB dB dB C Ohm MAXIMUM RATINGS Parameter Operating Temperature Range Storage Temperature Range Input Power Level DC voltage Min -10 -40 - Max 60 85 +10 3 Units C C dBm V MATCHING CIRCUIT 2 5 Input 50 Single ended Output 50 Single ended GND All other pads GND Notes: * * External matching components are not required. Device is intended to operate in a 50 single ended system. Spectrum Microwave, Inc. 400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401 www.SpectrumMicrowave.com DSSF0434BA02517S Rev X2 4-Feb-11 Page 2 of 3 434 MHz SAW Filter 7 MHz Bandwidth Part Number: SF0434BA02617S PACKAGE OUTLINE NOTE: Dimensions shown are all in mm. FOOTPRINT PAD Configuration: 2 Input 5 Output 1,3,4,6 Ground MARKING SMI ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. (c) 2011 All rights reserved. Spectrum Microwave, Inc. 400 Nickerson Road, Marlborough, MA 01752, USA Phone 508-251-6400 Fax 508-251-6401 www.SpectrumMicrowave.com DSSF0434BA02517S Rev X2 4-Feb-11 Page 3 of 3