Proximity Sensors Inductive Rectangular, Nickel-plated Brass Housing Types IC, ID, Cable and Plug * * * * Nickel-plated brass housings Sensing distance: 1.5 or 5 mm For flush mounting Output: IC 08: Transistor, NPN/PNP, make switching ID 25: Transistor, NPN/PNP, make switching or change over * Power supply: 10 to 30 VDC * Protection: Short-circuit * 2 m PVC cable or M8 plug (IC 08) IC 08 ID 25 Product Description Inductive proximity sensor in squared nickel-plated brass housing. This series is suitable for the control of axial and rotational movements. Output configured as PNP or Ordering Key NPN, make switching (IC types), make or break switching (ID types). Connection with 2 m PVC cable or M8 plug (IC types only). IC 08 ANC 15 NO M5-K Ind. prox. switch Housing style Housing size Housing material Housing length Detection principle Sensing distance Output type Output configuration Connection Type Selection Rated op. dist. (Sn) Connection Dimensions [mm] Ordering no. Transistor, NPN Make switching 1.5 mm 1.5 mm Cable Plug 8 x 8 x 40 8 x 8 x 60 IC 08 ANC 15 NO-K IC 08 ANC 15 NO M5-K 5 mm Cable 25x10 x 50 ID 25 ANC 05 NO-K Ordering no. Transistor, NPN Change over Ordering no. Transistor, PNP Make switching Ordering no. Transistor, PNP Change over IC 08 ANC 15 PO-K IC 08 ANC 15 PO M5-K ID 25 ANC 05 NA-K ID 25 ANC 05 PO-K ID 25 ANC 05 PA-K All types for flush mounting in metal Specifications Rated operational volt. (UB) Ripple Rated operational current (Ie) Continuous No-load supply current (Io) IC08 ... .. . O-K and ID 25 IC08 ... .. . OM5-K Voltage drop (Ud) IC08 ... .. . O-K IC08 ... .. . OM5-K and ID 25 Protection Frequency of op. cycles (f) IC08 ... .. . O-K and ID 25 IC08 ... .. . OM5-K Indication for output ON 10 to 30 VDC (ripple included) 10% 200 mA @ 25C 10 mA (ON) 9 mA (ON) < 1.7 V (@ Imax) < 1.0 V (@ Imax) Short circuit 1 kHz 2 kHz LED, yellow (ID25 only) Specifications are subject to change without notice (20.08.01) Sensing distance Effective operating dist. (Sr) Usable operating dist. (Su) Ambient temperature Operating Storage Degree of protection IC08 ... .. . O-K IC08 ... .. . OM5-K and ID25 Housing material CE-marking Connection IC08: 1.5 mm ID25: 5 mm 0.9 x Sn Sr 1.1 x Sn 0.85 x Sr Su 1.15 x Sr -25 to +70C (-13 to +158F) -30 to +75C (-22 to +167F) IP 65 IP 67 (Nema 1, 3, 4, 6, 13) Nickel-plated brass Yes Cable, 2 m, PVC, AWG 26 or Plug M8, CONH5A-xxx serie (plug versions only IC 08) 1 IC, ID, Cable and Plug Dimensions 8 8 2,4 O 4,5 8 8 3 5 10 5 15 25 2 x M3 20 20 40 60 2 x M3 LED 10 8 10 50 M8 x 1 IC 08 ANC 15 .O-K IC 08 ANC 15 .O M5-K ID 25 ANC 05 ..-K Wiring Diagrams 1 BN + + 1 BN 1 BN + 1 BN + 4 BK 2 WH 2 WH 4 BK 3 BU 3 BU - NPN - Make switching - NPN - Break switching 3 BU 3 BU PNP - Make switching PNP - Break switching Installation Hints To avoid interference from inductive voltage/ current peaks, separate the prox. switch power cables from any other power cables, e.g. motor, contactor or solenoid cables Relief of cable strain Protection of the sensing face Switch mounted on mobile carrier A proximity switch should not serve as mechanical stop Any repetitive flexing of the cable should be avoided Incorrect Correct The cable should not be pulled 2 Specifications are subject to change without notice (20.08.01)