Specifications are subject to change without notice (20.08.01) 1
Ind. prox. switch
Housing style
Housing size
Housing material
Housing length
Detection principle
Sensing distance
Output type
Output configuration
Connection
Types IC, ID, Cable and Plug
Rectangular, Nickel-plated Brass Housing
Proximity Sensors Inductive
•Nickel-plated brass housings
•Sensing distance: 1.5 or 5 mm
•For flush mounting
•Output: IC 08: Transistor, NPN/PNP, make switching
ID 25: Transistor, NPN/PNP, make switching or
change over
•Power supply: 10 to 30 VDC
•Protection: Short-circuit
•2 m PVC cable or M8 plug (IC 08)
Product Description
Inductive proximity sensor in
squared nickel-plated brass
housing. This series is suit-
able for the control of axial
and rotational movements.
Output configured as PNP or
NPN, make switching (IC
types), make or break switch-
ing (ID types). Connection
with 2 m PVC cable or M8
plug (IC types only).
Type Selection
Rated Con- Dimen- Ordering no. Ordering no. Ordering no. Ordering no.
op. nec- sions Transistor, NPN Transistor, NPN Transistor, PNP Transistor, PNP
dist. (Sn)tion [mm] Make switching Change over Make switching Change over
1.5 mm Cable 8 x 8 x 40 IC 08 ANC 15 NO-K IC 08 ANC 15 PO-K
1.5 mm Plug 8 x 8 x 60 IC 08 ANC 15 NO M5-K IC 08 ANC 15 PO M5-K
5 mm Cable 25x10 x 50 ID 25 ANC 05 NO-K ID 25 ANC 05 NA-K ID 25 ANC 05 PO-K ID 25 ANC 05 PA-K
All types for flush mounting in metal
Specifications
Rated operational volt. (UB)10 to 30 VDC (ripple included)
Ripple ≤10%
Rated operational current (Ie)
Continuous ≤200 mA @ 25°C
No-load supply current (Io)
IC08 ... .. . O-K and ID 25 ≤10 mA (ON)
IC08 ... .. . OM5-K ≤9 mA (ON)
Voltage drop (Ud)
IC08 ... .. . O-K < 1.7 V (@ Imax)
IC08 ... .. . OM5-K and ID 25 < 1.0 V (@ Imax)
Protection Short circuit
Frequency of op. cycles (f)
IC08 ... .. . O-K and ID 25 1 kHz
IC08 ... .. . OM5-K 2 kHz
Indication for output ON LED, yellow
(ID25 only)
Sensing distance IC08: 1.5 mm
ID25: 5 mm
Effective operating dist. (Sr)0.9 x Sn≤Sr≤1.1 x Sn
Usable operating dist. (Su)0.85 x Sr≤Su≤1.15 x Sr
Ambient temperature
Operating
-25° to +70°C (-13° to +158°F)
Storage
-30° to +75°C (-22° to +167°F)
Degree of protection
IC08 ... .. . O-K IP 65
IC08 ... .. . OM5-K and ID25 IP 67 (Nema 1, 3, 4, 6, 13)
Housing material Nickel-plated brass
CE-marking Yes
Connection Cable, 2 m, PVC, AWG 26 or
Plug M8, CONH5A-xxx serie
(plug versions only IC 08)
Ordering Key
IC 08 ANC 15 NO M5-K
IC 08 ID 25
2Specifications are subject to change without notice (20.08.01)
IC, ID, Cable and Plug
IC 08 ANC 15 .O-K IC 08 ANC 15 .O M5-K
Dimensions
8
8
5
2,4
20
40
2 x M3
88
5
3
M8 x 1
10
20
60
2 x M3
ID 25 ANC 05 ..-K
25
10
15
10
50
LED
Ø 4,5
8
Installation Hints
Relief of cable strain Protection of the sensing face Switch mounted on mobile carrierTo avoid interference from inductive voltage/
current peaks, separate the prox. switch pow-
er cables from any other power cables, e.g.
motor, contactor or solenoid cables Incorrect
Correct
The cable should not be pulled A proximity switch should not serve as
mechanical stop
Any repetitive flexing of the
cable should be avoided
Wiring Diagrams
+
-
1 BN
4 BK
3 BU
+
-
1 BN
2 WH
3 BU
+
-
1 BN
4 BK
3 BU
+
-
1 BN
2 WH
3 BU
NPN - Make switching NPN - Break switching PNP - Make switching PNP - Break switching
