www.RFM.com E-mail: info@rfm.com Page 1 of 2
©2008 by RF Monolithics, Inc. HN 10 - 4/10/08
2.4 GHz Stand-
Alone Modems
HN 10 Series
HN-510
HN1010
HN-1510
HN2010
HN-3010
Built on the heritage of the original FHSS family of modems and combining the advanced features of the
WIT2410 OEM module, there is a HN 10 Series modem that suits every need, from the relative comfort of an
office to the harsh conditions on the factory floor to the unpredictable weather of an outdoor location.
Based on 2.4GHz frequency hopping spread spectrum technology, all HN 10 Series modems provide
extraordinary range while providing immunity to jamming and multipath fading. All backed by extensive
experience in wireless technology. All HN 10 Series standalone modems feature a high data rate (460Kbps
over the air) and l ong range (over 5 miles using HN 10 external gain antennas). Both point-to-point and point-
to-multi-point network configurations are supported.
HN-510
The HN-510 has the same
components as its
ruggedized siblings in a
desktop-style enclosure that
provides compact size and
weight with a built-in
rechargeable battery pack.
Simply connect to a PC’s
RS-232 port using the 510’s
DB-9 connector and it’s
ready to go. Front panel
LEDs give complete power
and communications status
at a glance.
HN510 HN-1010 HN-1510 HN-2010 HN-3010
HN-1010
The HN-1010 is enclosed in
a NEMA 4X and I.P. 66 rated
housing and can operate
outdoors from
-30OC to +70OC. The unit
features a 9 pin I/O
connector for data, power,
and flow control. Transmit
and receive data are RS-
485 compatible dif ferential
signals while the flow control
lines are single-ended
RS-232. This interface can
drive up to 250 feet of cable
and can be converted to
plain RS-232 using the
HopNet 3500 data/power
adapter.
HN-1510
The HN-1510 features a
rugged enclosure for indoor
industrial applications. The
HN-1510 has a standard
DB-9 connector for I/O and
all data and flow control
lines are RS-232 signals.
Power is supplied via a
separate 2-pin connector.
The HN-1510 also provides
a 4 LED readout for power
and status indications.
HN-2010
The HN-2010 is a dual
wireless modem repeater
that can be used to create
complex extended range
networks, either point-to-
point or point-to-multi-point.
Half and full duplex I/O rates
from 1200bps to 230.4Kbp s
are supported. The HN-
2010 is housed in a NEMA
4X and I.P. 66 rated
enclosure for outdoor
operation between -30OC
and +70OC. A standard
DB-9 data connector is
provided to allow
configuration of the
repeater. Because two
wireless modems are used
back-toback, the full
throughput of the data
channel is available. Single
modem, store and forward
repeaters reduce the
throughput of the entire
system and add latency.
HN-3010
The HN-3010 is a compact
stand-alone modem with an
integrated patch antenna.
Housed in a NEMA 4X and
I.P. 66 enclosure, the HN-
3010 is a cost-effective,
one-piece, pole-mounted
transceiver. The HN-3010
has an operating
temperature range of -30OC
to +70OC. A single 9 pin
connector provides data,
flow control, and power.
Data signals are differential
RS-485 compatible, while
the flow control lines are RS-
232.
www.RFM.com E-mail: info@rfm.com Page 2 of 2
©2008 by RF Monolithics, Inc. HN 10 - 4/10/08
Specifications
HN-510 HN1010 HN-1510 HN-2010 HN-3010
Frequency Band 2401 – 2483 MHz
Licensing Unlicensed under FCC Part 15, ETSI 300.328
Number of Channels 75
Hopping Patterns User configurable, 64 patterns (networks) available
I/O Data Rate Up to 230.4 Kbps asynchronous
RF Channel Rate 460 Kbps
Line-of-Sight Range >5 Miles with 9 dB omni antenna
RF Bandwidth 750 KHz
Modulation Type GFSK
Output Impedance 50 ohms
Network Protocol ARQ: CSMA/C A or TDMA
Transmit Power +18dBm +18 dBm +18 dBm +18 dBm EIRP: +24 dBm
Receive Sensitivity -93 dBm -93 dBm -93 dBm -93 dBm -99 dBm
Power Requirements 5Vdc
750mA max. 9Vdc – 24Vdc
160mA typ. @ 9 Vdc
750mA surge
9Vdc – 24Vdc
160mA typ. @ 9Vdc
750mA surge
13Vdc – 24Vdc
500mA min. @ 13Vdc 9Vdc – 24Vdc
160mA typ. @ 9Vdc
750mA surge
Serial Data Interface Async. RS-2 32 Async. RS-485/RS- 232 Async. RS-232 Async. RS-232 Async. RS-485/ RS-2 32
Mechani cal Spec ifica tions
HN-510 HN-1010 HN-1510 HN-2010 HN-3010
Antenna External External External 2 External Integrated patch
Case Materials Plastic Aluminum Aluminum Aluminum UV stabilized polyamide
NEMA 4X, IP 66 NEMA 4X, IP 66 NEMA 4X, IP 66
Dimensions(mm) 130 x 95 x 25 213 x 142 x 53 200 x 145 x 51 213 x 145 x 76 175 x 160 x 61
Weight 275g 820g 725g 1590g 570g
Antenna Connector Reverse SMA TNC TNC TNC n/a
Data Connector DB-9 Conxall model#
3282-9SG-528 DB-9 DB-9 Conxall model#
3282-9SG-528
Power Connector 2-Pin DIN Conxall model#
16282-2SG-311 In data connector Conxall model#
16282-2SG-311 In data connector
Environmental Specifications
HN-510 HN-1010 HN-1510 HN-2010 HN-3010
Temperature Range 0OC to + 50OC-30OC to + 70OC
Humidity 95% at + 40OC, non-condensing
