FSS12 - FSS115 1 Amp. Surface Mount Schottky Barrier Rectifiers CASE: SMA/DO-214AC Pb Current 1.0 A Voltage 20 V to 150 V For surface mounted application Easy pick and place Metal to silicon rectifier, majority carrier conduction Low power loss, high efficiency High current capability. low VF High surge current capability Plastic material used carriers Underwraiters Laboratory Classification 94V-0 Epitaxial construction High temperature soldering: 260 C / 10 seconds at terminals MECHANICAL DATA XX = Marking code WW = Week code Y = Year code Dimensions in mm. Case: JEDEC SMA / DO-214AC Molded plastic Terminals: Pure tin plated, lead free Polarity: Indicated by cathode band Packaging: 12 mm tape EIA-STD RS-481. Weight: 0.066 g. Maximum Ratings and Electrical Characteristics at 25 C FSS12 FSS13 FSS14 FSS15 FSS16 FSS19 FSS110 FSS115 Marking code A1 A2 A3 A4 A5 A7 A8 A9 VRRM Maximum Recurrent Peak Reverse Voltage (V) 20 30 40 50 60 90 100 150 VRMS Maximum RMS Voltage (V) 14 21 28 35 42 63 70 105 VDC IF(AV) Maximum DC Blocking Voltage (V) 20 30 40 50 60 90 100 150 IFSM Forward Current at TL (See graphic) 1.0 A 8.3 ms.Peak Forward Surge Current 30 A (Jedec Method) Tj Operating Temperature Range Tstg Storage Temperature Range -65C to +125C -65C to +150C -65C to +150C Electrical Characteristics at Tamb = 25 C VF IR Maximum Instantaneous Forward Voltage (Note 1) IF = 1 A @ 25 C @ 100 C Maximum DC Reverse Current Ta = 25 C at Rated DC Blocking Voltage Ta =125C Cj Typical Junction Capacitance (Note 3) Rth (j-l) Typical Thermal Resistance (Note 2) Rth (j-a) NOTES: 0.5 V 0.4 V 0.75 V 0.65 V 0.2 mA 0.80 V 0.70 V 0.95 V 0.85 V 0.1 mA 10 mA 5.0 mA 110 pF 90 pF 2.0 mA 70 pF 28 C/W 88 C/W 1. Pulse Test With PW = 300 sec, 1% Duty Cycle 2. Measured on P.C. Board with 5mm x 5mm Copper Pad Areas 3. Measured at 1 MHz and Applied Reverse Voltage of 4.0 V D.C. Jul - 09 FSS12 -FSS115 Rating And Characteristic Curves MAXIMUM FORWARD CURRENT DERATING CURVE 50 IF(AV), average forward Current (A) IF, instantaneous forward current (A) TYPICAL FORWARD CHARACTERISTIC FSS19-FSS110 10 FSS15-FSS16 FSS12-FSS14 1 FSS115 0.1 0.01 PULSE WIDTH = 300 s 1% DUTY CYCLE 0 0.2 0.4 0.6 1.0 0.8 1.2 VF, forward voltage (V) 1.4 1.6 1.0 RESISTIVE OR INDUCTIVE LOAD FSS12-FSS14 FSS15FSS115 0.5 P.C.B. MOUNTED ON 5.0 x 5.0 mm COPPER PAD AREAS 0 50 60 70 80 90 100 110 120 130 140 150 160 170 Tamb, ambient temperature (C) TYPICAL JUNCTION CAPACITANCE 400 50 AT RATED TL 8.3 ms Single Half Sine Wave JEDEC Method 40 30 20 10 0 1 10 Cj, junction capacitance (pF) IFSM, peak forward surge current (A) MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 FSS12-FSS14 FSS15-FSS16 FSS19-FSS115 10 0.1 100 Number of cycles (Cycle) Tj = 25 C f = 1.0 MHz Vsig = 50mVp-p Tj = 125 C 1 0.1 Tj = 75 C 0.01 0.001 Tj = 25 C 0 20 40 60 80 100 120 Percent of rated peak reverse voltage (%) 140 Transient thermal impedance (C/W) IR, Reverse current (mA) FSS12-FSS14 FSS15-FSS150 10 VR, reverse voltage (V) 100 TYPICAL TRANSIENT THERMAL CHARACTERISTIC TYPICAL REVERSE CHARACTERISTIC 100 10 1.0 100 10 1 0.1 0.01 0.1 1 10 T, Pulse duration (sec) Jul - 09 100